Fix: Citroen C3 1.4 1.6 Hdi P1755 Clutch Actuator Fault. P0744 Signal Fault Open Circuit. Semi Auto

clutch actuator replacement on this semi automatic Citroen C3 Hdi diesel
vehicle intermittently wouldn't start or when started would not engage gear.
randomly gears would engage with a jolt

[@paulvanderwielen8173]

Thanks this has saved us a lot of money and I was able to replace clutch actuator on c3 pluriel senso drive. top notch

[@sheddyk9173]

Hi mate I’m hoping you can help I really just had my clutch actuator changed in my 2012 citron c3 everything was working fine until I drove home one night parked the car either the gear in R, the next day I tried to start the car it wouldn’t start, I looked on the dash and it’s not showing anything just a - where the gear supposed to show, the small screen on the dash kept saying out car into N and press the break I put it in N and pressed the break but it won’t start, someone advised me to get a new battery I’ve done that but still no luck, the gear box is in N but somehow the car won’t roll seems as tho it’s still locked in R from when I parked it that night can’t get it toed either as they want more money because the car won’t roll any advise on how I could sort this out or at least free the locked gear so it can be rolled?

[@Letdpoorbreathe]

Thanks , great job. Can I apply this to a Peugeot 3008, 2011 model with the same fault?

[@michaelyoung5503]

Great video, just put a new clutch kit in my peugeot 3008 2011. Replaced the slave cylinder so I assume I have to bleed the system, will this diagnostic tool do it?

[@khayelihleshandu6979]

Just changed the clutch plate now got gears not engaging

[@bmwe34sedan]

after replacing need to re-progamming actuator

[@davidcarsca5169]

saludos compañeros si no se hace la programación que pasa

[@umarrehman7718]

Can’t program mine comes with error any help please

[@eslamashour8952]

I had the same problem, but we make reprogramming for the gear and everything went ok without change any part What is that?!

[@ORileysAutos]

It will usually come back if the part wasn't replaced

[@kevinpalmer7452]

One hell of a relearn you wouldn’t want any interruptions will carrying out that procedure 🥴

[@ORileysAutos]

Definitely 👍🏻

[@mercymensah]

Hello I have changed an actuator on a Peugeot 208 2014 diesel. When I go into the settings to programme the actuator using my Maxidas ds808 tool the programming fails. This is what I get even with the battery charge above 12.5 v and connected to jumper Programming failed Ensure that the vehicle battery is charged -If a battery charger is connected to the -vehicle battery Connect a battery of a second vehicle with its Engine running in parallel -Restart programming -Read the fault if another fault is present The only other fault present is in the bsi unit P1A9C permanent fault …energy Accumulator state of health ( SOH) Fault of energy accumulator I cannot seem to get past the battery issue problem to continue the programming. Can you help ?

[@umarrehman7718]

Did you manage to fix this

[@mercymensah]

Hello no I did not

[@grahamdunning294]

Well done again ..wow ..

[@ORileysAutos]

Thank you 😊

[@grahamdunning294]

Hi is there any thing I can spray down my exhaust pressure sensor pipe on my 1.5 dci qashqai to unblock the carbon build up Thank you

[@ORileysAutos]

@@grahamdunning294 www.ks-international.com/off-car-dpf-cleaner-5l-18985.html?

[@125sm3]

Nice fix.

[@ORileysAutos]

Thank you