Turning a Purple Acrylic Bolt Action Pen

[@Robbiethewoodturner]

Beautiful pen Bob great finish,thats pen press is a handy tool very accurate All the best Robbie

[@RJBWoodTurner]

Thank you Robbie, I love my pen press. The only bad part is the aluminum piece on the press can damage a pen so I use cardboard to protect everything. Regards, Bob

[@hermessoboleski676]

Nice pen, I love bolt action pens, the mecanism ad disigh are amazing

[@RJBWoodTurner]

Thank you, The bolt is probably one of the best theme kits there is. I love it too. Regards, Bob

[@oldman719]

Nice job. I have never used acrylic, only wood. Would regular wood turning sandpaper work on acrylic or does it need that mesh you showed. Thank you... Al

[@RJBWoodTurner]

Al, Regular paper will work, I recommend wetting the paper to keep the heat down. Also sand very light because it will leave deep scratches. Micro mesh is twice as easy and almost impossible to mess up with. Regards, Bob

[@vicentecanonserrano886]

Bonito y practico... QUIERO UNO IGUAL... ¿Donde comprar?

[@RJBWoodTurner]

I don’t make pens to sell anymore. But my friend Michael DeLawter does if you want to ask a price. [e-mail] Regards, Bob

[@MikeWaldt]

Beautiful pen, and a very thorough tutorial Bob. great job my friend. Take care Mike

[@RJBWoodTurner]

Thank you Mike, I really appreciate the comment. Regards, Bob.

[@luisadrianolarastalchmidt7988]

Sou gràfico e fas parte de minha rotina usar canetas na profissão de gràfico e sou facinado por canetas !!!... Parabéns pelo trabalho !!!...

[@RJBWoodTurner]

😃

[@Trees2Pens]

Looks really good. I must try a Magnum bolt maybe with a camo blank. Thanks for the video.

[@RJBWoodTurner]

Your welcome, The camo blanks look great on these pens. One other blank I like that looks amazing and is popular around here is Bethlehem Olive wood. Regards, Bob

[@YTcustomchris]

I have not got into pen turning yet. It looks interesting. I mostly turn bowls Dose it take a lot pen turning tools to get started? What kinda lathe are you using?

[@RJBWoodTurner]

I have a small Harbor Freight lathe. Pen turning requires the following tools: Drill bits the size of your tubes. Bushings for a particular kit. Some way to hold the blank While drilling. I use a vise, a clamp will work. A barrel trimmer to flatten the ends of the tubes. A mandrel to turn the blanks on. Some way to press the kits together. I use a pen press, a clamp or bench vise will work. Your existing turning tools will work just fine for the turning part. I hope this helps, if you have more specific questions, please let me know. Regards, Bob

[@bonenfant96]

Hi. Can we use EEE Ultra shine on acrylic ? Thanks buddy.

[@RJBWoodTurner]

+Robert Lavoie Hello Robert, I've never used EEE on acrylic but I don't see why it wouldn't work. It's an abrasive polish. I day do for it and see what happens. Regards, Bob

[@jonathangabriel6336]

Hey Bob, how much would something like that go for? Looks really nice.

[@RJBWoodTurner]

I hadn't really thought about that yet, if your interested, I an work something up and PM you. Regards, Bob

[@roncoleman4017]

beautiful pen Bob, how often do you replace bushings?

[@RJBWoodTurner]

That depends. in the early days it was often but as my turning has improved maybe every 100 pens or so. Regards, Bob

[@TheChrisPineWorkshop]

I like those bolt action pens! I will have to do some of those soon! Chris

[@RJBWoodTurner]

They are insanely popular and relatively easy to make. I hope you do give one a try. Regards, Bob

[@willemkossen]

very beautiful pen. i couldnt write with it as i would want to watch it all the time :)

[@RJBWoodTurner]

That's funny Willem, Someone said something like that at the show yesterday and I told them the greatest comment they could pay me was to use it until it wore out. I think the patina on a pen shows how much it was loved. Regards, Bob

[@j.d.ransom6721]

Great looking pen, & great video Bob.

[@RJBWoodTurner]

Thank you J.D. Regards, Bob

[@mfwoodshop]

Turned out very nice. I never turned plastic before but I have been wanting to do it.

[@RJBWoodTurner]

Thank you Mike, If your tools are sharp it turns a lot like wood. It does seem to make a bigger mess though. I think finishing is way simpler that wood. Just wet sand and polish. With wood, I sand then C/A and if any floating debris gets on the pen, you sand and C/A again and again until it is clean and smooth. Then you polish. Much simpler. Regards, Bob

[@mfwoodshop]

Thanks for the info, maybe that's why I wasn't thrilled about doing pen. Because I hate sanding.

[@RJBWoodTurner]

Acrylic and micro mesh make that problem much less. Regards, Bob

[@Lanninglongarmmowing]

Awesome video! Sweet looking pen.

[@RJBWoodTurner]

Thank you very much. Regards, Bob

[@Lanninglongarmmowing]

No problem.

[@adamquincey4371]

Excellent...! That pen looks beautiful, live it...! Cheers...

[@RJBWoodTurner]

Thank you very much Adam. Regards, Bob

[@jonatham35]

Great looking pen! Thanks for the video.

[@RJBWoodTurner]

Thank you Jonathan. Regards Bob

[@Kingstonsmac]

My mom just watched this vid with me and she wants one this color !!!! Beautiful !!!!

[@RJBWoodTurner]

Thank you. Regards, Bob

[@iansabin2052]

Hi Bob I usually polish my resin blanks at full speed when using micro mesh. I see you polish at the lathes slowest speed. Am I doing this wrong?...

[@RJBWoodTurner]

No sir, There is no right or wrong way as long as you are getting results you are happy with keep doing what you’re doing. You may try slow speed polishing at least once and compare results to see which you like better. I now polish with Micro Mesh at 1,100 RPMs. That seems to work well for me and give the results I like. I’m always looking for other ways. Regards, Bob

[@iansabin2052]

@@RJBWoodTurner thanks Bob let you know if there are any difference Ian

[@Name___________633]

I'm thinking of turning a pen as someone who has never done so before! I'm trying to stay on a lower budget and want to know if the polish makes a big difference and if it is worth buying after using the micro mesh. I don't plan to use anything near a whole bottle, and maybe just a couple pens worth. Thanks!

[@RJBWoodTurner]

+faszfafawe1 it does make a difference. It makes the pen pop and protects it from hand oils. You don't need to buy polish, paste Wax, brasso, car wax, car headlight polish, any of those will do in a pinch. Bob

[@Name___________633]

Thank you! Loved the video.

[@sticustom]

Very nice pen. Thanks for sharing.

[@RJBWoodTurner]

Thank you. Regards, Bob

[@Gazooo29]

Do you have any videos showing setting up "Laser pen kits"? I've looked but didn't see many decent videos on youtube. There's some amazing options for kits but don't understand putting everything together or turning/finishing them.

[@RJBWoodTurner]

+Gazooo29 I've never seen a laser pen kit. I'd love to get my hands on one and turn it. Can you tell me where to buy one? If I can get one, I'll figure it out and do a video. Regards, Bob

[@Gazooo29]

Hi, That's great, there's many available here's some from Rockler. The Firefighter one and fish themes are very cool. It would be awesome to finally see a detailed step by step of the process from Gluing to finishing. www.rockler.com/wood-turning/pen-blanks/pen-inlay-blanks www.kallenshaanwoods.com/category/browse-all-designs.html I personally want to buy this kit, the pen looks amazing. www.kallenshaanwoods.com/product/INL156-SPBA-PSI.html thank you

[@RJBWoodTurner]

+Gazooo29 Thank you for the information, Give me a bit to acquire a blank and the proper kit and bushings and I'll start working on a video. Regards, Bob

[@deahnasdad]

subscribed. GREAT WORK.

[@RJBWoodTurner]

Thank you. Regards, Bob

[@101smallface]

Nice pen! I just got a couple of these kits to try, hopefully to turn tomorrow. What glue did you use to glue the tube into the acrylic blank?

[@RJBWoodTurner]

Thank you Mitchell, I used Insta-bond medium thickness C/A glue. Regards, Bob

[@RJBWoodTurner]

Mitchell, I have used Gorilla glue on acrylic and haven't had an issue with chipping. You may have had a crack in the blank from when you drilled it out. It may have been weak and blown out while turning. Regards, Bob

[@101smallface]

RJBWoodTurner I turned the chipped end down to the tube and replaced it with a little off cut piece from a different blank. Turned out pretty good.

[@Shadetreewoodworkerposts]

PlastX headlight polish works great. I have a whole bottle of OneStep and never use it now. Great looking pen Bob! I really like that deep purple color. On a side note...are you using the $199 harbor freight lathe? Is it variable or multispeed?

[@RJBWoodTurner]

Dean, My lathe is the HF 10" X18" belt driven five speed lathe. I think the asking price was $199 but like everything else at HF it was on sale and I had a 25% off coupon. Regards, Bob

[@littleohah]

Piece of art great job I want to get into pen turning may need some pointers

[@RJBWoodTurner]

Any time. Regards, Bob

[@radryan505]

I just got the starter kit for these from Penn State, but I have a question. when pushing the pen together, you first push an insert with threads on it for the front half of the pen... I can NOT get (what looks like it would be that insert) it to unscrew... as of last you know, do they still make them to unscrew? I don't want to use pliers on it in fear or scratching it. I just pushed it all together being gentle and taking off the "lead" part of the bullet. Thanks

[@RJBWoodTurner]

+Ryan Sanders Hello Ryan, They make a standard Bolt action where you press the whole front of the pen into the blank then they make the Magnum. The Magnum has the threaded insert. Best way to tell the difference is the standard has a 3/8" tube and the Magnum has a 10mm tube. Regards, Bob

[@radryan505]

RJBWoodTurner perfect! i must have the standard. it came in the starter kit that comes with the 3 kits, drill bit, and bushings. I got it for Christmas so I wasn't sure on what exactly was selected. thanks a ton! ...glad I didn't crank down with the pliers on it!

[@RJBWoodTurner]

+Ryan Sanders The bullet tip will unscrew from that one to change the ink. Leave the tip screwed on to press it together and be sure to pad it so you don't damage the tip. Regards, Bob

[@GreenArrows0705]

Well done! The pen looks great. Brett

[@RJBWoodTurner]

Thank you Brett. Regards, Bob

[@federicomartinez830]

What do you normally sell your pen's for?

[@RJBWoodTurner]

I don’t sell the pens I make anymore. Regards, Bob

[@rogerfortier6934]

Hi Bob I getting ready to buy some blanks and I really like this purple colour do you have a part number from pennstate Thanks Roger

[@RJBWoodTurner]

+Roger Fortier Hello Roger, That was a long time ago so I’m not 100% but I believe it was WXLB6234 Amethyst Purple Silk. Regards, Bob

[@rogerfortier6934]

I love that colour I just turned one close to the same also a Bolt Action It is my first pen , turned out pretty good I am still watching all your vids Cheers Roger

[@RJBWoodTurner]

+Roger Fortier The Purple will stand out more if you paint the inside of the blank. I hope I was able to get you the right blank, it has been a while since I turned that one. Regards, Bob

[@BarrettSendrowski]

Could you make me one? Ship it out to me and ill pay you 40

[@RJBWoodTurner]

Thank you. I no longer make pens for sale. Regards, Bob

[@PlaustrumWoodworking]

Looks like the tube painting worked out fine - no tube showing as far as the video shows. Nicely turned pen Bob, I must get myself one of those kits to try, they look impressive. Thanks for sharing the results of the tube painting. Cheers Bob

[@RJBWoodTurner]

Thank you Bob, The purple tube made the acrylic blank look darker in my opinion. It was a deep purple and stunning to look at. Regards, Bob

[@walterk3766]

Another great pen Bob. Keep up the good work.

[@RJBWoodTurner]

Thank you Walter. Regards, Bob

[@baconsoda]

That's lovely work Bob. I'm going to have to give these bolt-action pens a go. Best Wishes, Brendan.

[@RJBWoodTurner]

Thank you Brendan, The bolt action pens are fun and easy to make and they look terrific. I hope you do give them a try, I think you'll really like them. Regards, Bob

[@InsanityHere]

Your mandrel is obviously bent. Otherwise, yes, you made a beautiful pen.

[@RJBWoodTurner]

Thank you Ray, I have since purchased a replacement mandrel. My pens are turning much smoother now. Regards, Bob

[@InsanityHere]

+RJBWoodTurner You have a lot of imagination, like with the pen you cut up a coke can for. And the corn cob pen. Any others like that?

[@RJBWoodTurner]

I hope, I have ideas the real question is will the work out.

[@atreyashbhatia1165]

Very beautiful pen where i can buy that

[@RJBWoodTurner]

Thank you, I don’t sell them but thank you for asking. Regards, Bob

[@frankfitzpatrick882]

Nice pen Bob great finish, I wanted to turn some pens with local team colours do you have any idea if different colored blanks can be cut and rejoined to emulate the team colours or how to rejoin them before boring for the tube?

[@RJBWoodTurner]

Frank, You can cut them and C/A glue them back together. You just need to have two very smooth surfaces. Small imperfections can be filled with C/A. I have seen team color blanks for sale in the past, you may be able to find them on Google. If you can't, let me know, I am in several pen turning groups and I will ask around for you. Regards, Bob

[@frankfitzpatrick882]

Thanks Bob, appreciate the feedback Regards Frank

[@davidclauson6681]

Hey Frank, Bob's right about gluing the cut pieces together. Check out resin pen blanks. You can get colors from Hobby lobbk or Michaels or whatever you've got local. Pvc pipe for the blanks and custom colors, what's not to love about that. Hope this helps. Take care, David

[@roncoleman4017]

Love your vids and pens. I would like to see a video on your business and how you market your pens.

[@RJBWoodTurner]

Hello Rob, I don’t sell anything anymore. It got to be a lot of work.and I already have a job. I decided to make it 100% hobby fun. I love it way more now, best decision I made. Regards, Bob

[@roncoleman4017]

I'm happy to hear that Bob. I'd like to sell my pens to support my hobby and I'm not to your caliber to compete yet. Ron

[@PinItRight1]

Hi Bob, I painted my first pen tube with blue spray paint. As I was using my micro mesh, I noticed that the bottom half of the pen (slimline) I could see the tube which now was brass again? and I could see water inside the blank from the micro mesh. Several questions. I just watched this video, and you do not use any standard sandpaper 150, 220, etc... you just start with the micro mesh? Second, what paint would you recommend for painting tubes? and do you use CA to glue in your tubes after they are painted, or do you use epoxy? I know it is important to rough up your pen tubes so that the paint will adhere, I wish I could send you a picture of this disaster I have on my hands right now. As always thanks in advance for your valued advice. Jerry

[@RJBWoodTurner]

+Jerry Dionisio Hello Jerry, Lately I have been using a Q-Tip and painting the inside of the blank with acrylic paint from the hobby store. Model car paint also works well. I sill use C/A but only after the blanks have dried overnight. That way I can rough up the tubes with sand paper. Regards, Bob

[@jimmydillon153]

I am the recipient of this one of a kind pen! I just received it and I was thrilled not only for the reasons it was giving to me but to see how it was made! AWESOME! Thank you so much for both the pen and the video!

[@RJBWoodTurner]

You are welcome Jimmy, I am so glad you liked the pen. It was an honor to be given the opportunity to make it for you. Regards, Bob

[@watermelongrin]

I pour most all my blanks. This blank looks as if it has pearl mixed in with the purple. also, I use acrylic lens polish (blue) for cars to polish with. I apply a drop and at slow speed, I rub it on with my fingers until its dry and wipe it up with a soft worn out T-shirt. Paper towels aren't all paper and will scratch the surface. A lens cloth will work great, rubbing lightly at a high speed for a few seconds.

[@RJBWoodTurner]

Thank you Antoine, I purchased this blank from Penn State so I'm not really sure of the make up. You are probably right on the money with your observation. Thank you for the tip on polishing, I'm always looking for new things to try. Regards, Bob

[@davidclauson6681]

Bob that's a great looking pen. The painted tube made a big difference. I'll start coloring some of mine. Thanks for sharing and take care, David

[@RJBWoodTurner]

Your welcome David, I plan to paint the tubes for all of the opaque acrylics. Regards, Bob

[@thomaskusar5816]

Started turning these..

[@RJBWoodTurner]

Love the Bolt Actions.

[@baysimo59]

Can you make me a pen like this and how much would it cost with the shipping. I'm from Bulgaria. :)

[@RJBWoodTurner]

+simeon todorov Hello, I'd love to but I've found shipping to be extremely high. Send me your address and I'll put together the numbers. Regards, Bob

[@st-germainreal2622]

Nice job again thanks

[@RJBWoodTurner]

Thank you, Regards, Bob

[@luisadrianolarastalchmidt7988]

Quanto custa uma caneta para comprar ?...

[@RJBWoodTurner]

😃

[@HuntingWolf82]

Absolutely beautiful pen, did the paint on the brass tube affect the fit in the blank and did you scuff it before glueing? I want to start painting my brass tubes and was curious. Thank you

[@RJBWoodTurner]

The paint didn't affect the fit at all. I did dry fit the tube just to be safe. I forgot to scuff it but will in the future. I have used this particular blank many times and the painted tube really deepened the color. It was defiantly worth the extra step of painting. Regards, Bob

[@aburawansp]

انت مذهل احب هذا النوع من الاقلام نوع الأكريلك وكذلك لونه مميز .. اعتقد اني بدأت أهتم بهذا العمل الرائع أنت فنان انا مصمم جرافيك اسمي محمد فهد بإنتظار عمل ممتاز تقوم به 😊

[@RJBWoodTurner]

Thank you. Regards, Bob

[@MRrwmac]

That "turned" out very nice. Depth and colors were awesome. Thanks for sharing.

[@RJBWoodTurner]

Thank you Mac, It is always nice to hear from you. Regards, Bob

[@scottie1769]

That is a beautiful pen Bob. Love the color of that purple. I make a lot of the bolt actions out of deer antler. Will have to give acrylic a try. Thanks for sharing.

[@RJBWoodTurner]

Thank you Scott, I only made Bolt Actions from antler until a friend requested this one. Since, I have made several more and that have been very popular. Regards, Bob

[@squatchface4721]

can you get those micro mesh pads at woodcraft or other wood stores?

[@RJBWoodTurner]

+SquatchFace Woodcraft sells Micro Mesh. Regards, Bob

[@squatchface4721]

thank you :)

[@judithrushing135]

We done wood blanks with the bolt action. This really turned out beautiful. Do you pour your own acrylic blank?

[@RJBWoodTurner]

+Judith Rushing Thank you Judith, Not yet but I hope to start making my own soon. Bob

[@douglasschultz9730]

Hello Sir! Been watching you for a few weeks. I just want to thank you for showing me how to do these! Finished my first one today! Doug.

[@RJBWoodTurner]

Thank you Douglas and congratulations. Regards, Bob

[@djfjfjfjjfrhrhrjjt9135]

can this shoots like a pistol?

[@RJBWoodTurner]

+Djfjfjfjjf Rhrhrjjt No, LOL.

[@rogerteaters5282]

Very well done!!! The pen looks absolutely beautiful!!!

[@RJBWoodTurner]

Thank you Roger, I wish I was a better photographer and knew about lighting so I could give a truer representation. It looked way better that my photo. Regards, Bob

[@R4x8]

Nice work! I love the bolt action pens. One thing I noticed was the threaded insert. The bolt actions I have made didn't have that. What kit is that?

[@RJBWoodTurner]

+Adam Mayfield Hello Adam, The regular bolt action is press fit. The magnum is the threaded kit. I get them from Penn State. Regards, Bob

[@kathydillenbeck296]

Gorgeous project, Bob! Thanks for sharing.

[@RJBWoodTurner]

Thank you Kathy. Regards, Bob

[@cooperhanson5199]

I have some wenga pen blanks do you think you would trade a bolt action like the one in this video for 3 wenga and 3 mohogany pen blanks?

[@RJBWoodTurner]

+Cooper Hanson Thank you for the offer but I'll have to pass. Regards, Bob

[@raptorvskoolaid5669]

Where can i buy one

[@RJBWoodTurner]

Sorry, I no longer sell pens. Regards, Bob

[@kirstystones7793]

Do you sell your pens

[@RJBWoodTurner]

Hello Kirsty, I do sell the pens I make. I have recently stopped taking custom requests for pens because the take so much extra time to make and my shop time has been very limited as of late. My wife is building a site where I can sell the pens as I make them. Regards, Bob

[@rolandorodriguez2238]

hi i'm new at this i make acrylic bolt action and slimline pens , acrylic and wood but i don know how mush to ask for the acrylic pen and for the wood pen i also made some bolt action and slimline rattle snake skin so can some body help me with this question what should i ask for them thank you for your time

[@RJBWoodTurner]

Hello Rolando, I go to www.pennstateind.com. They list a low, medium, and high selling Price for every kit. It’s a great place to start with pricing.

[@paulabernathy3361]

Just turned my first pen tonight. I have been watching your videos and have enjoyed them so much. I choose an acrylic blank as my first pen....and it went great. Thanks for all the video guidance.

[@RJBWoodTurner]

Thank you Paul, I am really glad you found my videos that useful. I make them for fun and I love when they help others. Regards, Bob

[@RJBWoodTurner]

Paul, I watched your KZbin clip and that pen looks amazing! I would have commented on KZbin but there was no comment section. Regards, Bob

[@panickedjerzeegrl7622]

That was absolutely beautiful! Much better than the other video I watched ;-)

[@RJBWoodTurner]

Thank you.

[@luisadrianolarastalchmidt7988]

From Brazil

[@RJBWoodTurner]

😃

[@icespeckledhens]

Its a stunning pen. Did you use epoxy when gluing in the barrels, I tried CA but it does not always hold well. I have made a couple of acrylic pens but I do not like the smell from the acrylic when turning or drilling out. I used car polish on mine after the micro mesh and they really shine. Thanks James

[@RJBWoodTurner]

+icespeckledhens Hello James, I used Thick C/A to glue the tube into the blank. I painted the tube with purple acrylic paint before gluing it in I case the blank became translucent when thinned. I agree it does stink but you get use to it. Lately I have been experimenting with PlastX after the Micro Mesh and have been really happy with it. Regards, Bob

[@sreihart]

Wow! That pen is STUNNING! -Sharryn

[@RJBWoodTurner]

+sreihart Thank you Sharryn, Regards, Bob

[@madclickr1755]

What mandrel do i need for the bolt action Pen? I have one for the 7mm holes and insert, would this work

[@RJBWoodTurner]

Hello, You will use the same mandrel, only the pen bushings change. Every pen you buy will have bushings listed for it. They all fit on the same mandrel. Regards, Bob

[@gulfmedic1]

beautiful pen and great videos, one question, since i am new at this it seems that when you do acrylic you dont need to seal the blank, the plastic polish does that act like a sealant?

[@RJBWoodTurner]

The plastic polish removes any remaining very fine scratches from the blank and makes it shine. The acrylics don't really need to be sealed. Acrylic is a type of plastic so water will not harm it. I hope this answers your question. Regards, Bob

[@scottishshoreangler]

really nice as a beginner i'm learning a lot from people like yourself thank you

[@RJBWoodTurner]

+Arty S Hello Arty, Thank you for watching and for your comment, I appreciate it. Regards, Bob

[@alanrodriguez3172]

bob awesome

[@RJBWoodTurner]

Thank you Alan, Regards, Bob

[@daviddoerner6089]

Bob he received the pen and I just absolutely in love with it thank you so very much

[@RJBWoodTurner]

Your welcome Dave, Thank you for the opportunity to make this special gift. Regards, Bob

[@madclickr1755]

I need to buy some of the kits and get started making some these pens for my friends that collect guns. Thanks

[@RJBWoodTurner]

They will love them Reginald. If they hunt, make the pens from antler, your friends will go crazy. Regards, Bob

[@Kingstonsmac]

Beauty

[@RJBWoodTurner]

Thank you very much, Regards, Bob

[@lummiebergsma5750]

Cool!!!

[@RJBWoodTurner]

+Lummie Bergsma Thank you Lummie. Regards, Bob

[@waynehinton8368]

sweet

[@RJBWoodTurner]

Thank you Wayne. Regards, Bob

[@ke6bnl]

one more question on the bushing are they steel or aluminum? want to make may own, thanks for the help

[@RJBWoodTurner]

Ed, They are fairly soft and my gouge will cut them. My best guess is aluminum or some other soft metal. Regards, Bob

[@kaichristiansen8110]

great work man! keep the videos coming.

[@RJBWoodTurner]

Thank you. Regards, Bob

[@pakinambarakat2182]

Its amazing im sure your buddy will love it

[@RJBWoodTurner]

Thank you, He did. Regards, Bob

[@johnmatthews7379]

Wow!! That’s a good looking pen!! Great job!! God Bless You!!

[@RJBWoodTurner]

Thank you John. Regards, Bob

[@johnmatthews7379]

You’re very welcome!!

[@JustJay01]

Where do u get these pens? They look really nice

[@paraflightjoe1053]

+KingJayJ (KingJayJ802) www.pennstateind.com/store/pen-blanks.html

[@RJBWoodTurner]

Thank you, This new YT tool is showing me all the comments I missed over the years. Apologies for not responding sooner. I hope you're still watching and enjoying my videos. If you haven't checked out the channel for a while, please stop by and see some of the newer videos. I've made a bunch of the over the years. Regards, Bob

[@RJBWoodTurner]

Thank you, This new YT tool is showing me all the comments I missed over the years. Apologies for not responding sooner. I hope you're still watching and enjoying my videos. If you haven't checked out the channel for a while, please stop by and see some of the newer videos. I've made a bunch of the over the years. Regards, Bob

[@spinzwood8290]

Do you remember what the kit number was for this pen?

[@RJBWoodTurner]

+Spinzwood The kit number is: PKCP7520 and I got it from www.pennstateind.com. Regards, Bob

[@spinzwood8290]

Thanks Bob, I sent you way too many questions today :)

[@RJBWoodTurner]

+Spinzwood LOL, No problem, I just sent you a reply. I hope I was able to help. Regards, Bob

[@spinzwood8290]

Big help.. thanks

[@spinzwood8290]

Thankya

[@alihussein9313]

Can sell them on amazon

[@RJBWoodTurner]

I thought about it. Maybe one day.