This is my Federal Signal Valor red and blue lightbar with optional hot-foot take-down and alleys with full flood feature all controlled with a 6-button controller.
Пікірлер: 68
@Guillotines_For_Globalists6 жыл бұрын
1:08 begins the LAPD's lighting pattern. Very cool.
@rjracing385 жыл бұрын
Thanks, thank you for watching
@thetoad82535 жыл бұрын
rjracing38 how much do these lightbars cost?
@derekphillips13874 жыл бұрын
@@thetoad8253 about 2400 to 4000
@GRC6401 Жыл бұрын
1:08 Common flashing pattern for Vancouver Police Department
@KMJ39033 жыл бұрын
My crown Vic when I got out of the academy last year had the pattern at 1:12. This light bar was awesome, the scene and alley lights were very helpful.
@rjracing383 жыл бұрын
This is one of my favorite lightbars.
@ticky258610 ай бұрын
Are you talking about the lapd type light pattern or the one right after it?
@DanielOrtegoUSA4 жыл бұрын
This slams the competition. This is now the standard for the Arizona Troopers, and it's highly visible on bright Arizona summer days'. For fire trucks, I love the fedsig Navigator, especially with the new 6x4 Traffic Clearing LED heads. With these, not even the Valor can match the Navigator light output.
@rjracing384 жыл бұрын
Agreed, the Navigator bar is a whole new beast. Between wanting to acquire a Navigator bar for my collection, I am also interested to acquire the new Vision SLR bar as I have the Vector, Vision and currently the Valor.
@mitchellcrawford80406 жыл бұрын
Great video. The music selected was perfect :D
@rjracing385 жыл бұрын
Thank you, thank you for watching. I have more to come.
@re86724 жыл бұрын
Pattern at 3:08
@Bernie0481USMC4 жыл бұрын
Best lightbar video
@rjracing384 жыл бұрын
Thanks, one of my favorite lightbars.
@GokantheHusky5 жыл бұрын
I heard that the pointed end at the front is good for cutting through the air more efficiently so it minimizes the whooshing sound.
@rjracing384 жыл бұрын
Possible, I've never noticed the whooshing sounds on any other bar I've mounted but that's just me. Makes sense for aerodynamics but I have a feeling the main thought behind the design was to be a lot more noticeable at different angles especially approaching intersections instead of just lights flashing straight ahead. At least with this design, now lights will flash and be more noticeable at a 45 angle as well as straight on.
@GokantheHusky4 жыл бұрын
@@rjracing38 Perhaps. But it's all about perspective.
@สิทธิโชคยินนัง3 жыл бұрын
ราคาเท่าไหร่ครับ
@rjracing383 жыл бұрын
ทั้งนี้ขึ้นอยู่กับการตั้งค่าที่คุณกําลังมองหาและผู้ที่คุณซื้อจาก, สัญญาณของรัฐบาลกลาง Valor บาร์สามารถเริ่มต้นประมาณ $ 3k USD.
@__Cperez5 жыл бұрын
where can i get one for my work truck with white blue and amber
@rjracing385 жыл бұрын
You may be able to find a used one somewhere online but with that color configuration, unsure. Otherwise, you may have to play the waiting game to find on used online or order a newly setup one with Federal Signal.
@masterchiefherosneverdie38632 жыл бұрын
Will this work with the new pathfinder from federal signal
@rjracing382 жыл бұрын
I do believe so yes as it has the convergence network for the cat5 connection that the Valor utilizes.
@BlakeFreeman104 жыл бұрын
Is there a way to turn this lightbar all red or all blue. Can u show process of this if u can ?
@rjracing384 жыл бұрын
You can make this bar all red or all blue however, the leds need to be setup from the factory for all red and or all blue. Then programming from there is a little easier but the bar has to be setup for it first.
@seanphan38757 жыл бұрын
Your garage must be cool
@rjracing387 жыл бұрын
TrooperSeanPhan Gaming, with all my bars mounted and functioning, you could say my garage is lit. Lol
@braduh16 жыл бұрын
What are your thought on the navigator bar?
@rjracing386 жыл бұрын
Bradley Edwards, I've yet to get my hands on one but looking at their different layout configurations/setups, it looks like a nice bar. It reminds me of the Whelen Freedom Lightbar but the big thing I do like about the Navigator bar from Federal Signal is the unique choice of using LED reflectors and LED rotators in one platform using their exclusive Solaris® LED Rotating Reflectors (SLR) and QuadraFlare® reflectors. I'd love to get my hands on one and set it up and give a real accurate review with the bar going through the ins and outs of the bar.
@braduh16 жыл бұрын
I'd like to see the freedom bars in a dual color, they have them on the new FDNY trucks. Whelen is coming out with a new bar, it looks like a redesigned liberty bar.
@rjracing386 жыл бұрын
Bradley Edwards, agreed. I'd like to get a dual, tri or even quad color. Well my design would be tri or quad color if I could. I'm currently working on a tri color now.
@driversacha28345 жыл бұрын
or did you buy tour light bar
@rjracing385 жыл бұрын
This bar was for a client. I have another in my collection.
@driversacha28345 жыл бұрын
Control the lightbar with ss2000sm ?
@rjracing385 жыл бұрын
When this video was completed, I was using at the time the Federal Signal 6-Button Controller. I have set these lightbars up with the new Federal Signal Smart Siren Platinum Controller. You can technically run these off the SS2000SM but have a Serial Interface Module in between the lightbar and the SS2000SM.
@RenanMXFNYT4 жыл бұрын
Will this work with a Whelen CenCom, I need to put this on a corvette and wire it into a CenCom Sapphire (CCSRN36)
@swatofficer95133 жыл бұрын
I would definitely love to see that setup for sure.
@andrewseliga5456 жыл бұрын
Are the forward-facing hotfeet MicroPulse's?
@rjracing386 жыл бұрын
Negative, they are just setup as the standard hotfoots that are currently setup for only being white modules for mode 3 and take-downs.
@andrewseliga5456 жыл бұрын
Do you know what model they are?
@danielsacha19425 жыл бұрын
where did you buy your ramp?
@rjracing385 жыл бұрын
Ramp? Are you referring to my cloth backdrop or where the bar is mounted for display?
@104garton7 жыл бұрын
Out of all of the lightbars you have.. which is your favorite and why?
@rjracing387 жыл бұрын
Garrett G., very good question...each one I have I enjoy a lot because of the amount of time I've worked with each one repairing and refurbishing each one. I'd say it's between my Vision and my Valor. The Vision because it came off an older CHP 1992 Ford Crown Victoria that was wrecked and my Valor because of the newer styler leds and a few other things I installed with it and set for programming. I have my eyes on a we can Whelen that if I get it or build it, may be my ultimate favorite.
@104garton7 жыл бұрын
rjracing38 that's awesome and really cool that you brought them back to life and post them for everyone else to enjoy as well! I agree with your favorites very much even though I don't own either bar yet the vision and the valor are beautiful bars and unlike any other bars both in their shape, design and functionality. Not sure how you got your hands on that valor but I am quite jealous! They run for over $3,000 new!!!
@rjracing387 жыл бұрын
Garrett G., yea, I was looking into the Vaylors new and seen their price tag and yea. Let's just say I had some help with this one. I have another one I've designed and will get it posted soon.
@MikeHiLo5 жыл бұрын
Will this work with a standard smart siren ? Or do I need the platinum series?
@rjracing385 жыл бұрын
This bar requires a cat5 connection so it would not work with the standard smart siren. The standard smart sirens utilize multiple wiring instead of the cat5 connection.
@MikeHiLo5 жыл бұрын
@@rjracing38 alright,, do you know what's the cheapest controller I can get to control this lightbar? Cause I have the valor but have no way of using it... appreciate the response...
@rjracing385 жыл бұрын
@@MikeHiLo I would say the different controllers to look for other than the smart siren platinum would be the 3-butoon controller, the 6-button control or a serial interface module. In my opinion, I would do either the serial interface module or the 6-button controller. I love the small compactness of the 6-botton as it also has a slide switch but the serial interface module gives you a ton of options you can utilize and make a switch panel to control different functions of the bar. One thing I did not think about until now is if you have a smart siren that has the cat5 connection like used on the Federal Signal Vision bars, that may work. I have an extra one that I can test to see if it does in fact work. However, if you have the standard smart siren controller that was used toward the vector bars, such as the models SS2000SM, technically yes, you CAN use that with a serial interface model in between. I have 3 pending other videos I'm working on uploading for this weekend or next, I'll make one for you to show how to do so with this setup if you need visuals of how to hook that up.
@MikeHiLo5 жыл бұрын
@@rjracing38 yes i have the ss2000sm.... I tried wiring it up but had no success,, the siren box actually starts making weird noises,, I'm assuming a malfunction or something along those lines from the wires being connected wrong? Not sure... But the video would definitely be useful and appreciated if you could... thanks for the help,, this lightbar is a little more complicated than I originally thought....
@rjracing385 жыл бұрын
@@MikeHiLo yea, they can be a little tricky. Is your box making like a buzzing noise? I've had a couple of those do that and something was going bad till I swapped them. But I'll get a video going showing how to set that up with wiring diagrams and all as well.
@driversacha28345 жыл бұрын
hello, the two bottom flashes are original?
@driversacha28345 жыл бұрын
Is perm hotfoot or hook hotfoot
@rjracing385 жыл бұрын
Yes, they are original with the bar when I got the bar setup.
@rjracing385 жыл бұрын
The lower flashers are perm hotfoot. The bar itself is hook mounted.
@BlakeFreeman106 жыл бұрын
Is it for sale
@rjracing386 жыл бұрын
Blake Freeman, unfortunately not this one. We can order another.