Рет қаралды 2,148,989
I show how to overhaul a cup and cone hub on a rear bicycle wheel. I take apart the hub, clean all the parts, install new ball bearings, repack the races with marine grease, reassemble the hub and adjust the cones. I also show removing and install the freewheel.
Most front hubs use ten 3/16" balls on each side; Most rear hubs use nine 1/4" on each side.
▶ SUBSCRIBE & HIT THE 🔔 bit.ly/SubRJThe...
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
/ rjthebikeguy
▶TOOLS
www.rjthebikegu...
▶SHIRTS
bit.ly/RJBikeGu...
▶WEBPAGE
www.RJTheBikeGu...