RLAARLO OMNI TERMINATOR GETS CASTLE MAMBA X 3200KV COMBO

[@andrew4403]

Beautiful job on the paint by the way. 👍👍

[@kevinjeffers1]

I just picked up one. I also got the Typhon grom and the Mojave grom as well as the RLaario buggy with gold wheels. I'm following you with the Mamba X2 micro 5600kv systems on all of them. Thanks

[@MrMeDos]

Right on

[@samuelmanning8867]

Awesome video I am going to try your paint on my next build Thanks

[@MrMeDos]

Go for it! Thanks for watching

[@chriscrawford1958]

Nice job on that paint. Love the way that looks!

[@MrMeDos]

Thank you

[@Hungrybird474]

I must have jumped one after another for about 2 dozen packs on a dbl sided ramp . The only thing I noticed wearing quicker than normal is the outdrive cups in the rear , fronts are wearing too but the rears are worse . Mine is still stock . I just need to find some 1/10 diff cups that fit . Also , the tires were wobbly after 2 dozen packs of jumping . Took them off to check the bearings and all was good . Put the tires back on and everything was back to smooth , no wobble . Not sure what happened

[@MrMeDos]

Grab the upgraded cups. Hopefully that should fix the issue. Idk. Its all trial and error. Rlaarlo is still in the pending status with me. But im getting more and more impressed as I go. I have no brand loyalty, I like what I like and if it work, it work. But so far so good. They need a 8th or 5th scale basher now. Hopefully they get to enter into my realm of the hobby.

[@richardbrown6762]

Don't jump 😂😂

[@Syzygy77]

Man I like that paint job. Simple but flashy.

[@MrMeDos]

Thx

[@skyhawk21]

Great job man!!! Looking forward to raffle!!

[@MrMeDos]

Thanks

[@PoweredByCastle]

Great vid! Pure power in that beast!

[@MrMeDos]

Yeah so much power its crazy.. cant keep the nose down. But I have a plan… lmao.

[@Hungrybird474]

Thanks for sharing mr me dos 👍👏. Looks like it does well

[@MrMeDos]

Quick rip noting major. Just wanted to see it run for the first time with this power. Couldn’t keep the nose down on 4s 100% throttle. 75% seems to be the sweet spot maybe 80%. 100% speedrun for sure.. I want another one to be honest. Non CF but buy the unpainted body for it and bash it. 🤣🤣..

[@Slydc5]

I picked up one of these…. I am satisfied…. I am noob in the hobby but I think it was good pick up for first RC

[@MrMeDos]

Oohh for sure. Great buy bro.

[@SpellboundStats]

Wish I could have heard you over the loud truck, might want to cut that motor next time…lol

[@PhotoLee_AZ]

I've been watching all these videos with everyone doing the speed test using with gps. I'm new to the RC truck scene. Wanting to know how you're getting the GPS speed on your phone. What app are you using on your phone how does it all configure. I have a pixel Android. Thanks!

[@MrMeDos]

The app is call skyrc rc gears. Its on android too

[@Casitascrawlers]

Looks good I think I should’ve gotten the roller but I’m happy with the carbon I’m running those stock electronics till something blows then probably putting in a Max10 setup. I have the 17mm wheel kit as well & found some nice Proline wheels that aren’t much bigger then the stock that’s something that I think would hurt it putting on heavier bigger wheels it also effects the way it reacts in the air. But for the price of the Terminator no matter what form you get it is well worth the $. The chassis is very well built look at the arms. 👍💪

[@MrMeDos]

You are 100% correct bro. Its a lil tank.. lmao. The amount of people who got it with great reviews out weighs all of the negative aspects of it. They can honestly sell this for $350-400 and it would be worth it. I have a 3s granite, 3s big rock, 3s vortek, 3s senton, 3s typhon and they all cost more than this guy and this omni performs just as good if not better.

[@tommyt4g63]

I love RC

[@djtazzmtl]

How at the rear and front drive cups? Cause so far everyone's had them completely eaten up....

[@MrMeDos]

This my first run. No issues yet. I think it comes from the jumping and the angle of the axles not being horizontal when landing. I adjusted the droop screws on mine. It sits lower and the axles are not as angled. But we will see . I ordered the upgraded diff cups so hopefully i will never have an issue. Everything is on a trail run right now. So far so good.

[@Hungrybird474]

There’s not much tracking u til it arrives in the US from my experiences

[@MrMeDos]

Thats good to know. Thanks bro. I guess im just a lil thirsty to hop it up. Lol.

[@MrShaw83]

Cool paint job! Seems like you're similar to me, in that you don't "bash" yours. $250 is a lot to pay just to destroy something. Your front left wheel looks similar to mine. Mine came out of the box like that and it doesn't drive straight, it kinda veers off to the left. Is there a way to fix that, or shall I exchange it?

[@MrMeDos]

Thank you.. I have no issues, I just needed to adjust the turnbuckles to fix the camber and toe. Good to go now..

[@CoachD386]

Good video fam 💪🏾💯

[@MrMeDos]

Thankk you brutha✊🏾

[@BigCityCountryBoi]

I bought my first 3 hobby grade rc cars all in the same month in this order Xrt, Omni Terminator, then Sledge...I love my 2 powerful Traxxas vehicles but the Rlaarlo Omni Terminator Carbon Fiber edition is by far my favorite all around vehicle of the 3 especially with a 140 amp hobbywing max10 & hobbywing 2400kv motor on 4s 😮...Rlaarlo makes a great products 4 sure... Just be prepared to change those diff cups from all that 4s torque. Mine where destroyed after 3 weeks on 4s...😏

[@MrMeDos]

nice, its mos def a fun rig... yeah i upgraded all the drive train components on my pervious vid.. its a beast for sure.. thanks for watching bro!

[@Bigizzyrc]

Did you spray the outside of it?

[@MrMeDos]

Nope

[@Bigizzyrc]

@MrMeDos that's where I screwed up. So you did pearl first then metallic and white last?

[@micsherwood4930]

where did you get these decals?

[@MrMeDos]

which decals are you referring too?

[@micsherwood4930]

@@MrMeDos the ones on the terminator, that you painted innthe beginning of the video

[@lyricofwise6894]

Heard the body on the $200 version fragile, idk about the roller clear body

[@MrMeDos]

Roller clear is the PC body. Its the legit one. Lol not the brittle pvc body.

[@Rc-Krazy]

Does that paint chip over time

[@MrMeDos]

Nope! Spray nice coats at least 3 of them with no transparency and your good

[@Early_Lately]

👍

[@gradydeadsy6001]

We feel you😂

[@kevingalea92]

Who makes a video and leaves the car running that fancy watch and you cant get the time from it lol nice paint job on the rc came out sweet

[@franciscovazquez4589]

👏🏼👌🏼💪🏼

[@Rlaarlo]

Be careful for your wife's feet🤣

[@MrMeDos]

Lol. Sometimes you just gota get out the way!!!

[@andrew4403]

I guess jealous cuz the car is getting more attention than her. That's why you just leave them at home.

[@mikelargent516]

Better watch her feet, lmao!!!

[@Slydc5]

This look like Az haha

[@MrMeDos]

Its is.. I was at MCC

[@Slydc5]

@@MrMeDos yeah, that’s a good idea running that RC in a parking lot. It’s well lit at night.

[@qubahka77]

i would keep my wifee off the vids. vids bro. threw the whole vibe off. like what your did with the omni. btw regular Kyylon paints flake off after some use. Use paint for polyurethane.

[@MrMeDos]

Thanks for watching. Krylon Fusion dont chip.. Gota do your homework on it. Thats the only paint i use on all my custom bodies for years. Wouldnt put it on cam if i didnt trust it. Lol.

[@Syzygy77]

She’s helping film…