DigiTech JamMan Solo XT basic tutorial instructions

[@alexmurphy5289]

This is the best looper out there. At first, it seems like a pain in the ass BUT once you figure it out it's simply incredible

[@klstrat996]

Great explanation. Straight to the point without all the fluff.

[@edwinwise6751]

I have built a live rock band stage act around this device . I run my bass lines through 1 channel and my drum tracks through the other , keeping signal paths separate. Drum out to PA bass out to massive 750 watt bass amp driving 2 4x10 cabs. This rig makes me sound better than any of the forgettable bands I was in and out of. I am effectively a 1 man band consisting of vocal , guitar , drums And bass. I don’t use the onboard drums . I Import my own drum machines and programs. I also have the equiv boss model , but found this has way more memory and allowance to shift tempo with no pitch change. I run my guitar through my amp only . PA. Is just drums and vocals and sounds incredible

[@dennis288]

Awesome idea

[@A.WebbAndFriends]

Great Job rich - THANKS for making this video. wife bought me this as a Bday gift, It's been new in the box for a couple years now so it's about time I learn it - thanks again :)

[@luapnibgaoh6412]

I just purchased a used jamMan XT and the "off-shore" printed QUICK START was confusing! Rich, you nailed the simple instruction! Thanx too much!

[@christophercameron4615]

Thanks for this tutorial. I don't know why I avoided Auto Record. It works so much better for me.

[@peterdowner4315]

Casual drummer just picked up this pedal to make simple bass lines to jam with. Thanks so much for the rundown!

[@johnhorrobin8560]

Rich Menga When in overdub does the led go properly yellow or is it red with a touch of yellow

[@kentuckyblugrass]

Excellent out of the box tutorial

[@bassworship50]

My son just bought the RC-3. I was about to get one too until I stumbled across this video. Thank you for sharing your knowledge of this pedal. I'm getting mine next week because of your video.

[@Danny_Martino]

Great review . Still watching in 2024! Thank u bro

[@SidSewell]

Thanks Rich, I just bought this last week and when it arrived and I saw the manual I was a bit overwhelmed but your video explains it very well. I have just bought your book and looking forward to using this pedal in anger over the weekend. :-)

[@rmenga]

Thank you! And yes, the pedal is complicated. I did my best with the book to better explain in plainer English how it works. The JamMan Solo XT truly is a great looper and I'm sure you will enjoy it.

[@pmerkaba]

I'm a beginner and I know that I jumped into the frying pan by buying this beast instead of going with the "Unibuttom" one but to break a horse you need patience and practice. Thanks to videos and people like you Rich with the knowledge and the way for TEACHING in a simple and understandable manner. My pedal when pressed goes straight to solid red. I doesn't "Armed" like stated in the video. Due to this issue what I'd been doing is pressing & holding the pedal until I'm ready to record.

[@rmenga]

Solid red on switch press would indicate Auto Record is off and Pedal Tempo is off, both of which are global functions of the JamMan Solo XT

[@usernamemykel]

Broken horses go to the glue factory. It's an equine thing.

[@oldwulf6629]

Hi. Just got my pedal today, it’s a used one - no power pack or instructions but looking to get your written instructions anyway. Mine has the same thing. I’m following your tutorial but the led goes solid red and the green loop led solid green on that second press?

[@yungstallion2201]

I got to tell you that you're a life saver! Thanks for solving my problem

[@BigJakGuitarLessons]

Great video! Fine job giving the basics on formatting card & getting started!

[@rubickon]

I got it 3 years and i barely used it since its so complicated. Thanks man.

[@michaelcollins8288]

Thank you I have had this pedal for a while & not really used it as found it complicated. The manual that I downloaded is not used friendly so I look forward to your future video & book.

[@thetrout529]

My favorite pedal by far. When coupled with a trio it's amazing for practice. I filled up the sd card with blues tracks (bass, drums, guitar). Great to work on solo work without having to loop your own Rythm and get the trio going. Those two pedals are darn near a must for improving.

[@thetrout529]

Start The Rebellion not in the sense of them talking to each other. But easy solution......play your them loop into the jamman. Arm the trio and the jamman plays while he trio learns and plays with the rythem you played into the jamman. Good enough for me. If looking for perfect sync then the trio plus is the way to go but at $299 and already having the jamman my solution works great (got the trio for $49). Also with the sd storage on the jamman I got 99 rythem backing loops already saved and the sd card protect on so I don't over write them.

[@SidSewell]

What an excellent suggestion Keith!

[@wme714]

So you save the drums and bass tracks from the trio into the jam man? Storage

[@thetrout529]

wme714 thats one way to do it. I actually put a sd card in computer and loaded backing tracks on it. I then slid the protector switch on SD card so it doesnt get over written. The SD card holds 99 tracks. I can the load Jamman tracks into the internal memory (up to another 99 tracks).

[@wme714]

Keith Miller where did you find the back tracks ?

[@jayartey5298]

Dude, thanks a lot. I couldn't figure out how to format the SD card, so this video helped a lot. Cheers!

[@billyscrapper]

when i press it one more time at 8:07, i get a red light instead of the flashing armed light... gone through the steps several times ... i must be missing something it is def. set to off

[@redpaul101]

It's because it's not just that 'Pdl' (Pedal tempo) that needs to be set to 'off', but also that 'Arc' (Automatic record) that needs to be set to 'on' (according to the manual, it's set to 'off' by default - maybe it was 'on' on RM's unit & he hadn't noticed). The solid red light means that the unit's already recording, btw: i.e., it started recording as soon as you hit the pedal. If 'Pdl' is on, it enables you, as RM does rightly note, to use the pedal to tap out a tempo (shown via a light on the Tempo button - flashing red for the first beat in the bar & green thereafter), _but_ that means that you can't then simply tap the foot pedal to arm the unit: you have instead to _hold_ the pedal down (not just tap it) to arm it, signalled by the 'Tempo' light briefly flashing orange. The unit then starts recording automatically at the start of the next measure (the 'Record' light will flash green on the beat, then go solid red as recording begins). If you do want to use Tempo with Arc (say as a metronome), just use the 'tpo' settings in 'Setup' (as well as 'Pdl' being off, make sure that rHY - rhythm - is set to 'on', or you won't hear a beat, no matter what 'Rhythm Level' is dialled to). Once you've set your tempo, press 'Store' twice to save it in loop memory. If 'Tempo' is flashing but Arc is 'off', recording will begin at the start of the next measure as in para. 2 above. To clear the tempo from the loop, hold down 'Store' until 'Erl' (Erase loop) appears. Confirm by holding down 'Store' in response to 'E?'.

[@billyscrapper]

@@redpaul101 thnx....

[@redpaul101]

@@billyscrapper That took a while to work out. There's a lot of possibilities! I think I've got it right now 🙂

[@Falcon-ug5sk]

Picking up a JMSXT next week 😎. This book is already handy..👍 Thank you!

[@Mardukv5]

This is extremely helpful 👏 Thanks for sharing!

[@Carnagemmafilms]

Thanks. You have a good way of exposing things.

[@pronginator]

Just ordered mine today, thanks to your video!

[@lostmylaundrylist9997]

Thank you for the intro. Is it possible to adjust the sensitivity of the auto recording? I need to give it quite a strong signal to get it recognizing input. That is not necessarily musically what I want.

[@bradleybt]

Thank you, man. The first useful teaching tool to get me started with this pedal.

[@bradleybt]

I suppose to turn it off you unplug it , correct ?

[@rmenga]

Correct. It doesn't have an on/off, but then again this is true for most pedals.

[@Danny_Martino]

Thank you for your efford . It is jot an easy pedal but it is really worth to go deep into it. When you learn it you will apreciate it.

[@HOLYISLANDAUDIO]

You are such a legend for doing this!

[@vince040]

Thanks, best toturial i can find!

[@kennethdefreitas6845]

Thank you so much I just bought one a few hours ago and the manual said nothing about that setup button had me going crazy

[@beaumorris5289]

I love mine, but I've yet to learn how to loop. What I've done is I went on KZbin and downloaded videos. And turned them into audio format and play backing tracks. But it works great.

[@boimesa8190]

Can the aux input also be looped?

[@Havanacuba1985]

I’ve literally just ordered one of these , I’m thinking a great songwriting sketch pad , plus performing possibilities. Useful info you present here. Especially the SD card stuff. Thanks

[@kevinmalone8903]

Thanks. I just got one of these today. I also ordered the SDRUM so I could sync them. I had a Ditto Looper and it was great but it doesn't have the sync option. But yeah, I was getting a headache with this until I watched this video, and I'll watch the others. I have a Boss RC-50 that I bought 10 years ago and I spent more time with the manual than actually unit, and it's been sitting in its box for years. But I think this JamMan will be just what I need. Now to figure out the SDRUM lololol

[@Dolledokus]

Question : i have the standard one, not the xt. But my jamman starts up with 1, 2, 3 and then an F. After that nothing happens. Any idea what i could do or what is wrong? Is it possible to reupload the software in the pedal for instance? Ty for any input 👍

[@Mpactpics]

Please do some more advanced instruction. Did you ever write the book? Thanks

[@Mpactpics]

Found your book on kindle. Thank you. Are you going to do anymore videos?

[@TettehBeltman]

How many minutes of loop can you create on a single memory location, say internal memory location 1?

[@mattperry129]

How do you get a seamless loop?!

[@Blindberg]

How do you delete the sample entirely? I can’t figure it out

[@ajlapiana]

I set the pedal off then pressed the pedal then again I don't get a flashing light just a solid red

[@FastRedPonyCar]

How do I get this thing to record a phrase and then stop recording but not play it back? Like... I want to grab a loop and use it later, not immediately start playing it back once I'm finished.

[@UnroyalDutchie]

Just got this one today and I instantly loved it. I was wondering why the rhythm level needs to be turned down. When I record I want a click as well, so I can keep time.

[@longboard3816]

Hi, did you just format the internal card, or the SD card? if the pedal is not brand new and you have internal storage, will the formatting as you did, erase all the internal storage? Thaanks

[@guitargeargarage1482]

Thanks a bunch, watching only one time this 'basic training video I was able to fire it up quickly and go basic. I'm gonna watch it again now, The pedal is a blast and I've only 'cracked the surface. Looking forward to your book/manual on this equipment I'm sure it will make the learning curve less 'painful.

[@rmenga]

Thanks, much appreciated. This is a complicated pedal. In future videos and the future book I'll be putting concentration on making it easier to understand and use.

[@boimesa8190]

How is it possible to find out what class a micro SD card is?

[@FlamesAt1000ft]

Digitech put this pedal out as one may know by now,..quite awhile ago but,..that commented,..it’s still worth having today! (2021) A real cool one to work with if ya’ take the time to study it! The fact that it features Stereo IN & OUT is an awesome feature! Along with the Aux input,..Micro SD Card USB and JamSync,...one can create in ways you see fit. My advice is also to invest in the Digitech FS3X Footswitch as well to take advantage of all the features for however you’ll put the JamMan SoloXT to use! I use mine with the Digitech RP360 Multi FX Unit,. Bass Synth Wah pedal & the SDrum!! 👌🏾Cool lil’ Stereo Looper imo❗️✨🎶🎸🎛👍🏾😎 Rock ‘n Funk On Yawl‼️🤘🏾 Very informative video upload Rich! A+!! ✌🏾😎

[@overlook77]

This is, by far, the single most difficult pedal to use I have owned. I have never owned a pedal where you essentially have to read the manual for basic operation. Now that I spent like half an hour reading the directions I can do basic operations on it. Lots of features on this, not knocking the pedal, but I hate having to buy guitar gear where you have to sit around learning how to use it. If you just need basic looping go for the JamMan Express, else be prepared for a learning curve.

[@rmenga]

Fun fact: There is a "Looping Quickstart" sticker under the pedal. But aside from that, both the DigiTech JamMan Solo XT and BOSS RC-3 Loop Station are advanced for what they are. If you want easy, you get the BOSS RC-1 instead.

[@419thmilitia]

Man you did a great video on this thing. Thank you.

[@allbeit582]

Hi, I followed your instructions to auto record but it won't start ... auto record is on , and pedal is off. It's like it can't hear any signal yet sound is going through the Jamman to the amp ... Any ideas ?

[@rmenga]

Loop Level knob has to be up to at least 12 o'clock to hear anything from the pedal, and if it is but you still hear nothing after recording a loop, check the Auto Record global setting. This is detailed on page 50 of the English manual. If it still doesn't work, follow the instructions on page 16 of the English manual. And if it _still_ doesn't work after that, perform a pedal reset and try again, instructions for that are on page 60 of the manual.

[@allbeit582]

@@rmenga Yes the loop level is up and I checked the global settings but what's happening is the red LED doesn't change from flashing to solid when I start playing. Might have to do a reset then....So does the loop level act as input or output control ? meaning does it boost the guitar input signal or boost the pedal output signal ?

[@allbeit582]

@@rmenga Yep it's working now. Thank you ....Just one more question : Does your book have a troubleshooting section ?

[@rmenga]

Not really, the book is written more to be a faster operational guide. But on the plus side, the issue you just fixed with your JamMan is pretty much the worst problem you would encounter. The only other thing that would cause problems is "dirty" power from a stage environment. To defeat that, use a proper power conditioner strip like the Furman SS6B.

[@niolowprofilestudio2370]

Man i am trying to set the recording when the pedal hears sound and starts recording i have checked all features please help

[@tarkanyilmaz6905]

Hello. Thank you for the video. When i wanna clear the last loop i press and hold the pedal but it plays a few seconds before it gets deleted. Can you please help me sort it? thank you

[@notredame3727]

So when it comes to the sd card, I can load there my own samples in wav or mp3 and then let it play from the pedal?

[@LewdScoff]

cant delete loops complete;y. it says 'clr' but its still on there

[@lennycramshed]

Thanks .. just dug my guitars and this thing out of the closet after moving about 6 years ago and happy to find this. Glad to find a quicky on how to use it again without looking at that gawdawful manual again. And thanks for NOT having some stupid-ass kids squealing in the background during the presentation.

[@noelokeeffe3423]

Hi I recently got a Digitech JamMan Looper/Phase Sampler but I cant find any instructions, hold different is it from the Solo XI & which do you think is best

[@DerekHundik]

what file ext the sound is written on the memory card ? Can I listen to this / use it on my laptop ?

[@rmenga]

File format is standard compliant WAV

[@Offyourface123]

so does it not work if i already bought a 64 gigabyte mini sd

[@giovanigiorgos2955]

Awesome training video...............thanks!!!

[@mightymite57]

Thank you for the time saver !!!

[@traviscrown9189]

How about using the memory card for backing tracks? Mp3… wav?

[@vince3804]

anybody able to help me load my loops on the sd card so i can play along the jam manager isnt available any more for mac and im having an extremely hard time figuring this thing out i even had the ( what i thought was brilliant ) idea to make a loop on the sd - eject it - and then load it on my computer - you can then see the format of the files etc so i replaced the wav with a wav i created ( with 44.1k and 16 bit stereo ) but still doesnt work not sure what else to do

[@russk8091]

Did Digitech discontinue making this pedal?

[@theID2]

why is it that mine (brand new) doesn't do what this guy's does? right from the start. i plug it in put in a 16 gig mem card, hit store. red card mem is lit up. press the down button and run it all the way down to 1 and that's when his "loop light comes on and his tempo light is blinking". mine? no loop light and no tempo blinking.

[@crazyfire100]

does anyone know how to find a new power supply for these? I haven't been able to play mine in years because I can't find a compatible power supply.

[@shckltnebay]

Can this be in line with your amp and not effect the tone?

[@Ik-do7cf]

For me auto record doesn't work, I read somewhere I needed to change Arc in settings to "on". And now I do get the blinking red light when I press the pedal, but it just keeps doing that when I start playing and won't record anything. Does anybody know how to fix this??

[@Ik-do7cf]

It does record when I turn Arc off, but then I have to press the pedal when I start playing

[@kentstone5193]

Thank you for sharing this!!

[@staticmotion9438]

I saw a band use this live bass drop’s thought it was a pretty sick idea just wondering how exactly you’d go about that, I’m assuming upload it with the sd card but where would you find the sounds in the right format? And how would you program it to go off every time you step on it?

[@AlexR-hu7lm]

Hi, just ordered the "book" twice - by accident...... but I NEEDED it as a manuel to handle, read, not an electronic READ-ONLY version... how can I get a hard copy? Just spent $13 and have a computer screen to stare at? Please help

[@rmenga]

Email me directly and we'll work something out, my email is [e-mail]

[@georgemavimbela]

Wow this is so good thank you so much

[@philippofranchini932]

Very helpful video ...thanks ! On my pedal,however, the RED light goes solid immediately - I can't get it to the blinking mode. As soon as I arm it and press the pedal ( even when my volume is completely off on gtr) it starts recording. Any ideas ?? Also I noticed the red "Store" light goes on in my unit and not on yours . What's up w that??

[@rmenga]

1. Select a new blank loop. 2. Press SETUP key 7 times until display reads Arc. 3. Press UP key to change Arc from Off to On. 4. Press SETUP key once so display reads Pdl. 5. Press DOWN key to change Pdl from On to Off. 6. Press SWITCH to save and exit. 7. Turn RHYTHM LEVEL knob all the way counterclockwise so it is not heard. 8. Press SWITCH once. Red light blinks. 9. Play guitar, pedal starts recording. 10. Press SWITCH to stop recording. Loop will start playing. More details in my book here www.amazon.com/dp/1983102105

[@philippofranchini932]

Thanks, Rich ... I followed all the steps as you outlined but it still won’t go into blinking red mode. It just goes solid red immediately and the store button also lights up. Arc is off ... Pdl is off. The loop and tempo lights are off. Maybe my unit is defective

[@rmenga]

You can try a Factory Restore (reset), which you can do yourself. How to do this is located on page 60 of the English manual - however - if using a memory card, I suggest removing it before performing the reset. The reset will delete all existing loops, restore pedal settings to how it was when new, and put back the original factory 15 loops. Once that is done, go to loop location 16 on internal memory (the first 15 will be in use) and try the instructions I gave you again.

[@philippofranchini932]

Ok ! That worked ! Thanks

[@kevinmalone8903]

I had the same problem and it worked for me. This was advertised as new but I think it was a B-stock and was messed with. But Thanks again ! The red store button stays on. I'll read up on that one I guess

[@mickgreenwood7158]

Can you do seamless drone loops by recording a blank loop first like my ditto? Cheers.

[@rmenga]

Yes. You can record silence and then do the drone thing with the JamMan. In fact, you can do it better compared to simple loopers because you can exact-time your blank loop with a click track, then just turn the click track down so all you hear is the drone sound once finished to your liking.

[@mickgreenwood7158]

Sounds great. I will be buying one. Thank you for replying.

[@mickgreenwood7158]

Enjoying it so far. Great to to able to store loops. Also got foot switch so have been storing drones in different keys and switching between them on the fly. Great for ambient noodling. Thanks again.

[@rmenga]

*_**BOOK IS OUT!**_* Get the eBook here www.amazon.com/dp/B07DKZPWKG or paperback here www.amazon.com/dp/1983102105

[@davidofthenorth7163]

Just started looking for a looper pedal, and this vid by you, is by far the best tutorial I've come across. Liked and subscribed. Got to go, Got to check your other vids out.

[@TOPmusicman8]

Great tutorial! I'm looking for a trigger pedal where I can load the SD card with a 5sec sample and then hit the pedal once and it plays once without looping. Would this work for my situation?

[@rreszler]

Great video can’t wait for the rhythm one!

[@totallybonkers76]

How to import directly from pc wave file (a premade loop) into jamman solo xt via memory card ? Pls help .. can't find this information anywhere! thx in advance .. Tom :)

[@miata350]

I want to use this to play a couple pre recorded samples. If I have it setup with them on the memory card and ready to play them, will I have to re-select the slots and set it up every time it's plugged in? Also, if say I play a sample on slot 1, will it stop or will it continue on to slot 2 automatically?

[@ricoamordavila7496]

Do u have to use a memory card to just use the looper??

[@Chrrymatt]

Is it possible to use this pedal to trigger samples like an 808?

[@CheloStyles222]

Yes but would have to run it directly to PA of course to get the full effect 😉

[@musicproductionvideos5019]

Does this have the ability to count in?

[@rmenga]

Yes it does

[@jenniferschrey4430]

how do you delete a loop? so the loop doesnt have anything on it

[@rmenga]

Press and hold STORE until "ErL" (Erase Loop) appears on the display. Press STORE again, the display reads "E?" (Erase Loop confirmation). Press and hold STORE, "dEL" (Delete) appears on the display. This is all described on page 29 of the manual.

[@kevinmalone8903]

Can I delete the factory pre recorded beats on phrases 1-15 this way ? Don't need those

[@stevenmaclean7908]

i looked this up cause someone had one for trade and i was all exited. but then i watched the video and realized that i would through it through the fucking wall because i am not patient enough and way to fucking stupid for this thing. you have to have allot of time on your hands to deal with that crap. i play out acoustic and need a looper and this pedal would never flow with playing live with people waiting around to dance. craziness. thanx brodie. you saved me a ton of bullshit

[@rmenga]

An easier looper to get along with for those that don't need the advanced features of the DigiTech JamMan Solo XT or BOSS RC-3 is the BOSS RC-1. That looper is specifically designed to be user-friendly with very easy operation.

[@pmerkaba]

Loved your video and how easy and to the point. Is this a one time set up or do you have to repeat the set up after unplugging the device or power a failure?

[@rmenga]

There are both global settings and loop attribute settings on the JamMan. The manual does give a quick chart on page 41 describing which are which. The JamMan will keep global settings the moment you save them. If power is lost after that save, you get them back when power is applied again. Loop attributes are saved on a per-loop basis, so as long as the loop is saved, settings are kept even if a power failure happens. If you happen to live somewhere where you get power flashes often enough to be concerned about it, the solution is to use a cheap UPS power brick. That will ensure that power to the pedal is never lost if power flashes are frequent.

[@pmerkaba]

Thanks my friend! I;m following you.

[@carlosnoriega7296]

Is it true that this pedal has a slight delay when recording?

[@rmenga]

Not in my experience with it

[@fastheartmartvideos]

Thank You!

[@jorgelovesmusic94]

Thanks you so much Rich! you have solve me a issue from a long time ago, now defently i´m going to buy it! "From the moment that the pedal pick up audio it will start recording, the blinking light will pass to solid". Pisas el pedal en modo grabación y la luz roja parpadea, y solo empieza a graba cuando el pedal recibe audio, en ese momento la luz pasa de parpadear a quedarse permanente.

[@kennethdefreitas3120]

Hi rich nice video but I cannot get my jam man to loop

[@Stephen_Eee]

Random, but if you speed this video up 2xs, it sounds like Johnny Depp doing Hunter S Thompson...to me anyway 😅 great vid

[@glenderonde911]

Thanks very much.

[@minder4u1]

You're the Colombo of tuition, " Oh one more thing"

[@Ston247]

Great tutorial. What I don't understand is why wouldn't Digitech use output # 2 as a rhythm/loop output...... like the Jamman Stereo? The Solo XT would've became the "End All Be All" of loopers and would've made the Jamman stereo obsolete. Oh, I guess I answered my own question. Digitech has to continue to make money off the other product. O.k. so, I bought the ZooM R8. My bad.

[@rmenga]

Yes it would have been nice to get the Rhythm Out feature that the JamMan Stereo has, but even without it, Solo is still a very good looper and a better value than the BOSS Loop Station RC-3 (you don't even get a power supply included with BOSS, that costs extra).

[@jeffreyogden8802]

Very nice.

[@andre3434]

Appreciate the tutorial videos - I have a problem I'm trying to figure out- normally I just hit the pedal with my foot to start recording immediately - PDL is on - now when I try to record I have to tap tempo in and hold down pedal to start and it counts me in 4, how do I undo this? thanks..

[@yellowman4337]

Doing god's work.

[@conartist267]

Hey Rich, I bought your download. Just wondering, Is it necessary to download firm ware? Mine's still in version right out of the box.

[@rmenga]

Thanks, much appreciated. DigiTech has not released any firmware updates for the JamMan Solo XT as far as I'm aware. If you're referring to the JamManager XT v2.3.5 software, that's not firmware but rather librarian software that runs on a PC or Mac. You do not need the software to use the pedal; it's optional.

[@audiotechlabs4650]

Just found your channel...you are good! Your videos are also good. Did the jamman XT you have come with some factory loops, in the onboard memory? A further look at this pedal by you would be very helpful. I found so far the pedal is not all that difficult to operate. I will use mine for backing tracks and some live looping. I bought it for the reason it has a sd card to store and endless amount of loops. When a card is full, just change cards, which filling a 32 gb card may take a while. Another aspect of this pedal, since it is stereo, it is a virtual recording studio. With the ability to layer sound on sound as many times as needed, and with some careful balancing of levels, one could create a "Wall of Sound"! If only these would have been around in the 70s, Phil Spector would not have used a big recording studio! Thankz

[@Pali91]

Hello, I have a problem, because my computer does not detect the device and I can not connect it ... I was looking for drivers but nowhere else, can you help me? My computer is HP20002d14Sw, best regards

[@originalfallinggirl]

You rule! Thank you so much!

[@colemud448]

Cool. Thanks.

[@usta028]

is it also possible to let one memory slot play whilsth recording in another.