RMS Titanic 1/600 Scale Model Ship Kit Build Review 05498 Easy Click Revell Germany

The #Titanic now in #Scalemodel form that you can build in a weekend from #Revell!
RMS Titanic was a British passenger liner that sank in the North Atlantic Ocean in 1912 after striking an iceberg during her maiden voyage from Southampton to New York City. Of the estimated 2,224 passengers and crew aboard, more than 1,500 died, making the sinking one of modern history's deadliest peacetime commercial marine disasters. RMS Titanic was the largest ship afloat at the time she entered service and was the second of three Olympic-class ocean liners operated by the White Star Line. She was built by the Harland and Wolff shipyard in Belfast. Thomas Andrews, chief naval architect of the shipyard at the time, died in the disaster.[4]
Titanic was under the command of Capt. Edward Smith, who also went down with the ship. The ocean liner carried some of the wealthiest people in the world, as well as hundreds of emigrants from Great Britain and Ireland, Scandinavia and elsewhere throughout Europe who were seeking a new life in the United States. The first-class accommodation was designed to be the pinnacle of comfort and luxury, with a gymnasium, swimming pool, libraries, high-class restaurants and opulent cabins. A high-powered radiotelegraph transmitter was available for sending passenger "marconigrams" and for the ship's operational use.[5] Although Titanic had advanced safety features such as watertight compartments and remotely activated watertight doors, it only carried enough lifeboats for 1,178 people-about half the number on board, and one third of her total capacity-due to outdated maritime safety regulations. The ship carried 16 lifeboat davits which could lower three lifeboats each, for a total of 48 boats. However, Titanic carried only a total of 20 lifeboats, four of which were collapsible and proved hard to launch during the sinking.[6]
After leaving Southampton on 10 April 1912, Titanic called at Cherbourg in France and Queenstown (now Cobh) in Ireland before heading west to New York.[7] On 14 April, four days into the crossing and about 375 miles (600 km) south of Newfoundland, she hit an iceberg at 11:40 p.m. ship's time. The collision caused the hull plates to buckle inwards along her starboard (right) side and opened five of her sixteen watertight compartments to the sea; she could only survive four flooding. Meanwhile, passengers and some crew members were evacuated in lifeboats, many of which were launched only partially loaded. A disproportionate number of men were left aboard because of a "women and children first" protocol for loading lifeboats.[8] At 2:20 a.m., she broke apart and foundered with well over one thousand people still aboard. Just under two hours after Titanic sank, the Cunard liner RMS Carpathia arrived and brought aboard an estimated 705 survivors.
The disaster was met with worldwide shock and outrage at the huge loss of life and the regulatory and operational failures that led to it. Public inquiries in Britain and the United States led to major improvements in maritime safety. One of their most important legacies was the establishment in 1914 of the International Convention for the Safety of Life at Sea (SOLAS), which still governs maritime safety. Several new wireless regulations were passed around the world in an effort to learn from the many missteps in wireless communications-which could have saved many more passengers.[9]
The wreck of Titanic was discovered in 1985 (more than 70 years after the disaster) during a US military mission,[10] and it remains on the seabed. The ship was split in two and is gradually disintegrating at a depth of 12,415 feet (2,069.2 fathoms; 3,784 m). Thousands of artefacts have been recovered and displayed at museums around the world. Titanic has become one of the most famous ships in history, depicted in numerous works of popular culture, including books, folk songs, films, exhibits, and memorials. Titanic is the second largest ocean liner wreck in the world, only beaten by her sister HMHS Britannic, the largest ever sunk; however, she is the largest sunk while in service as a liner as Britannic was in use as a hospital ship at the time of her sinking. The final survivor of the sinking, Millvina Dean, aged two months at the time, died in 2009 at the age of 97.

[@snatchertheunfriendlyghost558]

I’m so happy models like this exist because I’m a stupid person and could never paint or glue stuff together

[@opsharpie1055]

Same

[@sdmedia1323]

Absolutely same.

[@carltitanic_vids97]

Oh my gawd

[@Jamiera475]

I can glue stuff but it always gets on my fingers

[@seapeanut1133]

Ong

[@Captain_Mulaj]

Bin ich der einzige Deutsche der sich ganze Zeit Titanic Modell Videos reinzieht?

[@radioactivelarry]

I have the first printing of the book Titanic Sea Disaster from 1912, it was dedicated to my Grandmother when she was 12 years old. The family had return tickets from New York back to Brittan on the Titanic but it never made it. Great build Chris, snap kits have come a long ways.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@kyleSD70MAC]

That looks nice! Loved that "Titanic effort" joke in the beginning, and that music during the painting. Gotta get my mitts on this sometime.

[@HardeepSingh-fv5sq]

GO GO GO GO JACK IS BACK

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@Jones607]

This is the best kit build I’ve seen online. Thanks for sharing.👍🏻🇬🇧

[@maryfiltz800]

Love the story of the Titanic, so fun to see this build. Thanks again for a great one.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@sethguest781]

Yes, every person who builds boats or ships should definitely get this particular one, these old steam liners were truly magnificent and a sight to behold!

[@hpiguy]

Couldn't agree more!

[@SeansModelBuilds]

I got mine done in time to give it to my mom for Christmas. She loved it, and in October she saw the shipyard in Belfast that built the Titanic.

[@SeansModelBuilds]

I am building that model right now. I may give it as a birthday present next year for my mom.

[@99gprix]

I bought this kit because of your review!!! Beautiful kit!!!

[@hpiguy]

Enjoy!

[@theblueaxolotl8895]

When you add some more detail and some extra paint this model looks amazing

[@chrisC052]

Another great build Chris. I never,never would have guessed that was a press fit kit. The details on this kit is amazing. LED lighting would turn a great kit into an amazing kit. Again nice build.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@1955mouse]

definitely an awesome kit and another awesome job chris! thanx!

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@ronroberts2453]

Another excellent build review and presentation Chris, well done!

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@toddzehr203]

Glad you did this build! Everytime I go to the Hobby Shop or Michael's they stock the shelves with 5 of these Titanic kits and within a week they are out of stock and reordering more. I always notice this and think to myself must be either a great kit and/or people just love the Titanic. Very impressed with the detail. I have been modeling for 30+ yrs and never would think about buying a snap kit. When I started modeling the snap kits were never this detailed and had a lot less parts. I am definitely buying one of these now that I see what's in the box and the finished model. Looks very nice. If you showed me just the finished model I would never have believed this was a snap kit.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@toddzehr203]

Subscribed already on KZbin and will do the same on FB!

[@charliebowman785]

Very interesting model. As usual you've presented us a superb quality model. Thank you so much Chris.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@robertphillips6296]

Very good especially for a snap tight kit build. Well done.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@chopperbaldwin610]

That is an amazing looking build. Nice and clean and detailed. Keep up the great work and R.I.P.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@crashdive100]

Holy Mackeral, Chris! The fidelity of detail on this kit is phenomenal! This is SOOOOOOOO cool and love the fact that we get to see another ship kit. Promise you'll build the USS Pittsburgh when Atlantis releases it shortly. Also want to plug the Round 2 reissue of Lindberg's Godzilla. The massive Polar Lights kit was fun to watch but the Lindberg Godzilla was a GREAT kit based on Big G from the 90s and deserves a video all his own. You ROCK, bro!

[@hpiguy]

I have a request in the for Zilla kits. Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@charliebowman785]

Anchors aweigh! I love USN. I love America with all my heart!

[@hpiguy]

Thank you and thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@editoralex1]

Great build, great kit. Enjoyed watching

[@hpiguy]

Thank you and thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@nb_cash]

She's a beauty! Great work!! 👍

[@hpiguy]

Thank you! Cheers!

[@diecast_MikeEspo]

Awesome build . SO KOOOOOLLLL Mike Espo .

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@reaperofsouls7700]

love the titanic and all its history.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@frankgranados1755]

Me too my fellow comrade!

[@clifftrimble2616]

Nice build my friend! I really like the detail and effort that Revell put into this kit. Will get with my local hobby shop and get one ordered! During my last tour in the UK, we went to see a Titanic exhibit that was really well done..

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@billybobbarklow8289]

Great build, I used the LED strip in mine diffused with a folded paper towel. But this one is bigger than mine was. A very enjoyable build to do and video to watch. Have a great one bud and Build on Brother....😎

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@ranosian1135]

I can say I enjoyed this video and enjoyed the model

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@DHDSCALEMODELS]

Nice little build there for the scale,good work👍

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@ianmunslow5675]

Fantastic build Chris , I build lots of truck snap kits and with a little time and detail the look as good as the 1/24/5 kits

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@subliminalstyrene811]

Turned out really nice, amazing considering it's a snap kit, they're really putting a lot of effort into the moulds and detail these days. I have the revell Anniversary 1/400 scale Titanic and was thinking of doing a seascape diorama with it, but the size is way too big so might seriously consider getting this snap kit version and detailing it up a bit. Nice one !

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@chassegallerie2910]

Yup a really nice kit. I agree with you for the decks, I would also go for a little bit darker... Perhaps even add a little orange to the mix. That said, it's sad that it doesn't come with a frozen solid Leo. lol Did you end up finding the part? You know, I think we should request from model kit companies that they put tiny GPS thingy in those parts, so when they go off flying somewhere, we could use the GPS system to track them down in the room. lol

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@johnfreeman1408]

very nice build. Thumbs up

[@Therevdon]

Turned out beautiful, and I loved everything about the video except for one thing. I openly admit that my own OCD is really the problem here, but they're called "Funnels", not smokestacks! Great build, and great video!

[@9HighFlyer9]

That's pedantic not OCD. Don't trivialize actual OCD.

[@Therevdon]

@@9HighFlyer9 Not pedantic either, it was just a joke.

[@9HighFlyer9]

@@Therevdon "a person who is excessively concerned with minor details and rules or with displaying academic learning." Than it was a joke about being pedantic. 😂

[@jonathangodwin9410]

Great review my friend! The finished model looks great. I agree the starting age might be a bit low.

[@hpiguy]

Yeah, it's great but I think the range listed is too young. Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@samuelvasquez8170]

Wow great looking kit and build.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@frankgranados1755]

I’m getting this model in a couple days, and after watching this video I have good expectations for this. Great video, Keep it up!!!

[@hpiguy]

Hope you enjoy it!

[@frankgranados1755]

hpiguys Workshop I sure will

[@bigcharliesmodelgarage296]

Looks great Chris

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@mrclarke5200]

Looking forward to the Trumpeter 1/200 scale Titanic to come out

[@joeshmoe9978]

That will be a cool kit.

[@mattfarahsmillionmilelexus]

I think you can put an outboard on that and drive it around the lake.

[@hpiguy]

Me too, send me one!!!!!!

[@mrclarke5200]

@@hpiguy The 1/400 50th anniversary edition Titanic from Academy looks to be a great kit to , I just got mine only 2000 made

[@MrBMBuilder]

You need aa Part 2 with the lights you mentioned :)

[@ronperrine6636]

I finally managed to get this model. The only thing I have a problem with is the compass tower that goes between the second and third funnel.

[@lancebuttox9637]

We don't care if it sticks, we don't care if it clicks, as long as it's fun, great build, thanks

[@hpiguy]

Great way to put it! Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@NicksCollectableCreations]

beautiful model. I have been thinking of building one of the various Titanic model's out there and this one is certainly worth considering. I am planning to do a video of the Molly Brown House in Denver soon.

[@hpiguy]

Thank you and thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@mattfarahsmillionmilelexus]

The color of the funnels was called White Star Buff. That yellow seems pretty close.

[@andyrichardsvideovlogs8835]

True fact.. White Star Buff paint was mixed with a tin of tomato juice added to the paint just before application.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@degenetron7590]

Picked this up yesterday, never done any modelling but wanted a titanic model, and prebuilt ones are expensive. Bought some weathering paint too and the model really does look decent, I expected it to be a little bigger but it is what it is. I don't think a 10 year old would have the patience though to install all the little details, and the waterslide yellow line does not stick to the bumpy surface between the black and white deck, there shouldve been a flat line to accomodate that. I would like to get into proper modelling and building a bigger titanic, but having to buy a compressor is holding me back

[@ZINC_CROSS6868]

Incredible!

[@hpiguy]

Thanks!

[@cushingpushing]

That looks awesome.

[@hpiguy]

Thank you and thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@douglasnieblas74]

Great build. I’ve built the 1/570 Revell Titanic and the 1/350 Entex kit. I’d love to tackle the 1/200 scale Trumpeter kit, but that’s out of my range at the moment.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@johnodham5729]

You do a good job on your moldes I like your website

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@kyleruiz7167]

It probably may be quite a while till aftermarket photo etch set is released, especially since 1/600 is quite a new scale compared to the traditional 1/700 scale that photo etch is available for

[@tomcline5631]

Really good looking ship! The plating is a little out of scale,though I understand why. You need it that thick to show details at this small a scale. Otherwise,pretty dang cool.

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@uberquellen]

Does it come with the iceberg? 😂 Great build.

[@Captain-Nostromo]

Put a bucket of water in the freezer, then you get a realistic One 😁

[@hpiguy]

Big bag of cubes from the gas station coming!

[@resetplayz53]

I’m getting the kit soon, I think if my mom helps me I could totally do it

[@hpiguy]

You can do it!

[@Hurricane_Allen.1980]

you can make it look better by painting both anchor chains silver and both anchors gold

[@hevendor958]

ahhh the Mighty Olympic class vessel but i also like it how revell makes these snap kits mostly i did get the Academy RMS Titanic but instead i accidentally broke the stern mast but i converted it into the rusted version of the Titanic witch can be seen in Raise the Titanic a 1980 film based off the novel

[@hpiguy]

Thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@constpegasus]

Very nice.

[@hpiguy]

Thank you and thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@stephmill8547]

As a young lad, I built a large model of the Titanic myself. It took me two years to complete. The Bugger sunk on the maiden pond voyage !!! What are the odds ??

[@hpiguy]

Pretty good odds if it's 'accurate'. LOL

[@kaijuninja5810]

I really like this model, thankfully they sell it at a local hobby shop near me. I'm willing to put it in water so I can make it sink. By any chance, if you know, if I put it in water, will the pieces fall off? Thanks for the building and review!

[@williamkidney6031]

I built the other version years ago it still sits on my dresser, I'd do another if I could get a case for it.

[@BAST_master_MODELS_]

Nice!

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@eamonnhaddon5105]

A good build and paint job . PS went are you going to continue your build of P51 airplane.👍

[@hpiguy]

Thanks as always! I'll get to the P51 as I can, not rushing. 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@HopiaPandan]

Thanks for the review! Is it possible to make the HMHS Britannic out of it? I want to make the Britannic :D

[@gabeford8176]

this is just a tiny bit of information, but the aft deck is called the poop deck. it originates from the roaman word, puppis wich means stern of the ship.

[@eobardthawne5246]

It lacks the recessed areas at the forward and aft well decks (underneath the forecastle and poop deck). Those recessed areas are the entrances for the crew and third class single male passengers (at the forward well deck) and the entrances for the third class married couples and third class single female passengers (at the aft well deck). But this kit is more accurate than Hobby Boss' larger 1:550 kit which lacks so many windows and the promenade deck bulkheads are all straight.

[@sleepybeanz5078]

What light rig is good enough to light that up? Asking for a friend.

[@louispluspizza]

"If I made a mistake, life goes on!" *-hypiguys Workshop 2019* 9:02 Btw still a nice video!

[@TK42100]

1:45 to 1:51. Do a few of those Welin davits look broken?

[@TheSteamLocomotive]

Nice build! Hope you do a Masterpiece Models prehistoric creature soon.

[@hpiguy]

If they would like to contact the channel and have us do a review they are welcome to.

[@joeshmoe9978]

Andys hobby headquarters channel has one one it, so M.M. could send this channel one also.

[@JuanJose-tl8pg]

Wow!😱😱😱😱😱

[@hpiguy]

Thank you and thanks for stopping by the channel and watching! facebook.com/hpiguysworkshop

[@hunterknobelcatholicknight3006]

The grey parts of the ship like above front of wheel house did you paint it or did it come with the model cuz I’m confused and if so where can I find the grey paint

[@maxbuhmiller2005]

Looks great, where can you find Molotow pens ?

[@hpiguy]

Modelroundup.com

[@elliottscreations7208]

Just what I needed I don’t understand why there aren’t pre assembled models of the ship but this is as close as My laziness can get to pre assembled it will probably take me all Saturday and a Sunday morning but look good I’m my bedroom also can it float man?

[@hpiguy]

No idea if it floats, may tip over being so top heavy.

[@elliottscreations7208]

hpiguys Workshop please can you test it I need to know I’m 15 years old and I’m bored I just want to make sure I haven’t wasted £30 on something that doesn’t float 😂

[@elliottscreations7208]

hpiguys Workshop also isn’t almost 2 feet long?

[@carltitanic_vids97]

I wish I have one too

[@jaxonyoldi1838]

I’m looking into getting the model I have one question is it required to drill out holes on the front and back decks to get things to fit like you said in the end of the video or is it an option for more details?

[@99gprix]

No drilling required

[@MrJaw0214]

This seems like a pretty easy Titanic model kit to put together. I've checked out and skimmed through the assembly instructions found on Revell's website, and I see there are no pieces to assemble for the promenade A deck (second one from the top deck). The deck isn't too visible, though, but it's still missing. The deck-colored parts sprue that's shown @ 7:17 has a space that is suspiciously empty. Would that space be for the A deck pieces? Hmm...

[@99gprix]

It's meant for a younger builder, but can be detailed for the more experienced builder. I really enjoyed building mine!!

[@pascalpuisset2614]

un petit ajout à mon précédent com; finalement ce modèle se révèle decevant. pas mal d'approximation; de toute façon cette échelle est trop juste pour avoir une belle qualité de détails. je pense que le 1/400 est un minimum. decevant aussi venant d'une marque comme revell. j'ai du agrandir 3/4 des trous ou ouvertures pour y glisser les picots et autres languettes des pièces;

[@cubanangel1985]

What paint color was used for the decks?

[@chezsnailez]

We remember a hobby shop in Troy, NY that had a Titanic model kit in the window labelled 'Civilian Submarine' next to a kit model of a Nuclear Submarine. Is the shop you usually link to selling it? We wants.

[@hpiguy]

Modelroundup.com does not sell this kit, but a google search of the item number will show you plenty of sellers. I use Tower Hobbies when MR doesn't carry a kit.

[@pascalpuisset2614]

j'ai acheté ce modèle il y a quelques mois; meme si il est déjà peint , j'ai préféré tout repeindre, le résultat sera meilleur. j'ai juste commencé le montage; et j'ai déjà un problème d'emboitement entre la partie noire et la partie rouge; un léger écart; un modèle plutot réussi, sauf bien sur ; l'absence de cablages , que ce soit au niveau des cheminées comme entre les deux mats

[@alvinprettyman1802]

thanks for posting what was the music?

[@hpiguy]

Random tracks from the YT free music library under 'sailing'.

[@charlespalavros5908]

Nice job little behind on my videos ... Happy New Year

[@hpiguy]

Thanks for watching and Happy New Year from hpiguys Workshop!

[@skidoorulz4914]

When you say 2X black primer does that mean 2 coats or is that the name of the paint?

[@hpiguy]

2X is the brand of Rustoleum paint.

[@Anthony99user]

Can the ship go in water

[@devinrussell2372]

I have the 1:700 scale R.M.S Titanic by Revell Germany.I haven't finished it yet,because there is a total of 5 or 6 1:700 scale photoetched sets;by Tom's Model Works.I only have one;out of the total 6 sets,to super detail the model with.There is also a resin prop set;for the Revell Germany 1:700 scale R.M.S. Titanic,that I want to get my hands on.All together,that comes out to be ~$45-$65.00 MSRP;for the other 5 photoetched detail up sets.

[@hpiguy]

Yes, a person can get really deep into ship kits.

[@donaldfinley2829]

Just wondering, did you ever find that piece that went flying?

[@hpiguy]

Nope. Tis gone to the ages.

[@Titanic-zw4rb]

Try the 1:1000 titanic model

[@AbeTheBabe6233]

ive orderd one to make it sink

[@ItsHax_YT]

is that avalaible in philipines

[@GeneralHobbies]

👍👍

[@hpiguy]

Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@The_Visitorfn]

If you are missing a part you can just email the support and they send it to you for free

[@hpiguy]

Correct, but I don't have time to wait 6 weeks to continue the video. :)

[@escty7249]

Does everything come in the kit?

[@hpiguy]

Watch the video and every question will be answered.

[@escty7249]

@@hpiguy well some people didn't get the black parts

[@suegould7214]

Can it float

[@frankgranados1755]

Sue Gould Probably not...

[@lynnlouviere5964]

I have this model :)

[@hpiguy]

Enjoy Lynn!

[@monkeybirthdaycake0627]

Mine never got instructions or stickers with it

[@hpiguy]

You should contact Revell, I can't help you with that. Thanks!

[@NYCmetro9]

Does anybody have a link of where can I get the model?

[@hpiguy]

Google the model # in the title.

[@gerdogstenc2534]

I find tweezers are more problematic than they are worth for small parts. I find that a little saliva on your finger holds the small parts better.

[@holloweyes5209]

Thank god there was a model that you don’t have to paint 😂

[@vodka2432]

I’m gonna paint the following bits on mine: Funnels (dull tan) Keel (dark red) Deckhouses (brown tops) Lifeboats (dull tan tops)

[@phantom629]

Buy 3 and build Titanic, Britannic, and Olympic

[@hpiguy]

Buy 4 and do a wrecked dio too!

[@phantom629]

Which wreck?

[@vodka2432]

@@phantom629 britannic, titanic, and a scrap yard diorama with a halfway scrapped Olympic XD

[@syb2965]

The aft deck is the poop deck.

[@JDsHouseofHobbies]

But, does it come with a miniature Kate Winslet? lol

[@hpiguy]

Paint me like one of your French girls!!!!! *Gets out craft paints... Thanks as always! 'Like' the FB page for the channel and join the fun if you haven't already! facebook.com/hpiguysworkshop

[@RockinL7BuckingBulls]

Where’s Jack and Rose?

[@hpiguy]

1500 feet below....

[@frankgranados1755]

hpiguys Workshop yep