Road glide 107 with Star racing 3030 cam!

[@On2WheelswithDennis]

Installed a 30/30 in my 117 FXLRS and absolutely love it 👍👍

[@michaelmaningding]

Is 30/30 like a 475 which is a Hp cam or torque cam?

[@Jim_Berry]

Sounds awesome! Those just look like floor board replacements….. mids should be further back.

[@taylerdamps3860]

LOL that first pull....car alarm... made me laugh, great video.

[@markgreen2488]

Very nice bike!!! I did a cam install in January on my 2017 Ultra Limited 107ci M8. Wood 22XE, Wood lifters, S E 55mm aluminum intake manifold , SE Ventilator Plus air cleaner, and S&S Sidewinder 2/1 exhaust. 113hp, 118 ft lbs . It's interesting to see how all the different cams perform. Great video. Thanks for sharing this, and again, GREAT BIKE!!!

[@Pinozcyclezandridez]

I had the same set up as you…dyno tuned it made 101/128…I’m going full 2:1 D&d, ported s&s mani, woods cam and tman intake. Can’t wait to see the new numbers

[@robertfagan8833]

Beautiful bike. I love the color. Cam and pipe sounds amazing

[@tommiller8714]

Curious how the Star Racing 30/30 Cam performs in the longer stroke (4.500") 114 and 117 M8 engines? Stock OE engines static compression ratios are 10.0:1 (107), 10.5:1 (114), and 10.2:1 (117). I would imagine that the higher compression of the stock long stroke engines (specially a 114 with 10.5:1 c.r.) would yield much more power & torque with this cam. I'd bet that a 107 with the HD-SE 107-to-119 Stage-3 Kit that in addition to the +12 cubic inches has 11.0:1 static c.r. It would haul the oats for sure! And of course, the 114/117-to-122 Stage Kit would yield even more. Recently researched the Zipper's Sleeper Kits [107-to-124 and 114/117-to-128 Kits, Stage-3] have monster torque (150+ at the wheel, with around 132hp) with the Redshift 468 Cam; more with the Redshift 472 cam. Their Stage-4 Muscle Kits have even more.

[@Mainecat21]

I have about 500 miles on my 22 RGS with the 114- MHP 485 (basically same cam) with MHP mufflers, KW free flowing header and 55mm intake running 132 tq 121 hp. Smooth and quick from 2,500-4,800 rpm's

[@williamrose8944]

Check out George Bryce he to bikes now with 30/30 cans, I asked him the numbers on 117 engine 120 hp and 140 tq

[@tommiller8714]

@@williamrose8944 Hello. Those are nice numbers (120hp / 140tq) on a 117 that can be an everyday, go anywhere HD touring bike. Curious what bike (touring or softail), what intake (air cleaner/intake manifold/injectors); exhaust system; & Tuner those numbers were for? Or, stock bike with just the cam (& maybe slip-on's & high flow a/c?).

[@mykol1842]

Tom Miller i have 2019 107 streetglide i bumped it to 117 with Cycle Rama 480 cam 55mm intake 5.5 injectors V&H power duals exhaust titan 450 mufflers the thing put out 135 HP 147TQ on dyno here in Australia

[@JonV-r7q]

The Bike is SWEET !!!! Thank you for showing it. Not bad numbers at all. I bet that's a very dependable motor even with the upgrade. You want something to ride and have fun with, not something you have to always be fixing.

[@alaingroenen8505]

Go with the Sawicki long, blockhead just did a review on it. Looks and sounds great and outperforms the rest of the pipes!

[@jayi.4687]

They didn't even include bassani in that shootout so hard tellin

[@Avankaurparmar]

Hey bro love yo content it's very informative I got a question. I bought my first harley a 2023 roadglide special I'm looking to up the power what cam would u suggest for that overall chop and deep rumble? I'm going with a trask assult ventilator and basani road rage 2-1 exhaust. I really want that potato potato sound but deep thinking a s&s 475 cam chest??

[@pnutz__]

I remember doing those mids in my garage last year with our tuning issues 😂😂 that 30/30 cam changes any bike

[@Marvelkid87]

😂😂😂😂 sounds crazy bro and feels great

[@duffy7029]

By tuning issue do you mean when i mashed my wire harness and shorted the whole ecu out?

[@pnutz__]

@@duffy7029 hey I didn’t wanna say it 😂😂

[@Ridehighfxdb]

How much power does it make

[@ericnay7733]

I also have a reef blue 2022 road glide. Bassani 2-1 mid length, zippers 468 cam, Arlen ness big sucker. 110 hp and 119 ft/lbs. I love it. Also got the budget tbar set up. Drag specialties 8.5 pull back risers with thrashins mid bend bar. I had the La choppers cage fighters originally so I could still see my gauges but lost all view of my infotainment. So I swapped to the pull back risers and blocked the gauges instead since the infotainment has its own speedo. Until I spring for the gauge relocation. Those don’t seem like mids, just a peg swap where the floorboards were. Idk. I’m no mechanic.

[@1Bigduff]

Nice bike but I would not call those foot pegs mids.

[@royjames196]

definitely not mids. Looks like the harley pegs mod I put on my softail. Harley makes the mod parts for softail and baggers. I like mine much better than the stock floorboards

[@freebehindbars8654]

Only mid a short guy couldn’t reach.

[@JakobKaizen]

Hey bro! Where did you get that foot peg conversion kit from? Looks sick! Does it move your legs and feet further anything? Cheers!

[@dry509]

So are you saying the stock bike is a clean look or did you remove parts from the bike?

[@kerrymcclure7503]

That is a beautiful bike, I love that blue. It would be even more beautiful with two chrome pipe, out the back.😂😂😆😆. Sorry I just love the looks of duels. Ride safe.

[@antonioarocho8757]

Very nice sound on that 107 with the cam 👍🏻💪🏻😎

[@johne6525]

Ok so…. For a 107 , S&S 475 or the 3030?

[@pierfrancescotancredi8353]

Neither, but the 3030 is still better. However on a 107 better a cam less performance pushed, look at an rs 468, or a s&s 465, a fueling 465. Even a SE power cam 462 would be good on a 107. Just preferences.

[@d.sandell2555]

What kind of seat is that blue scooter rock'n?

[@joesainato8051]

Nice. That cam is really solid. And for 2 into 1. The thunderheader is performing really well. Of course D&D, and it seems like kromewerks has had good results as well. Imo go with full length it’s far superior for all around tq and hp.

[@kellybgliding]

I have the same cam on my 107 and that boi pulls and keeps pulling

[@pnutz__]

Yea I was impressed with the 30/30..it opens it all up.

[@STAYHUMBLE302]

Yerrrrrppppp beeeee derrrrpy !!!!They are not mids he just took of the floor boards and went with pegs ! You would I have To actually do the Arlen ness mids or DMC boosted brad mids those are forwards Changing out floor boards and putting pegs does not make them mid controls haha😂

[@MrMurphc13]

Ia the 30/30 s hp or torque cam?

[@SJBagger]

You looked surprised there at the end, I guess you were expecting much better.

[@Marvelkid87]

Not really I can care less about numbers I’m not one of those guys

[@SJBagger]

@@Marvelkid87 I just meant the way you were talking about it early on. I'm not a numbers guy either but I'll simply say I would have guessed more then the final.

[@theoldmanflynchmotovlog4846]

Funny I re-watched this video after the weekend of doing a 1K in a day and heading back west afterward across an empty 80W sunday morning at higher speeds than the average citizen would approve of and thinking to myself "I don't think it would hurt for my 107 to have a little more power..." But i digress, last Friday afternoon i was finishing my 1K in a Day and my goal was to get my final gas receipt at the gas station beside the best tool store in the universe in Totowa New Jersey (New Jersey Discount tools) and the whole trip the GPS kept saying "we found a shorter route" and kept messing with my numbers so i realized I was going to be about ten miles short of my goal i googled a couple destinations that would give me the extra mileage and "Torque motorcycle shop" was the perfect mileage addition so i did a quick drive by, i was going to stop and get a shirt but id already screwed up my time by falling asleep at a rest area, get caught in endless road construction all over the midwest and hung around one gas stop to listen to a very high barefoot chick argue with the cops that it was her constitutional right to be barefoot in the gas station she got thrown out of. Next time. Googling this cam though.

[@JonV-r7q]

NICE!!!! Sandwich !!!!!!!

[@bishopruger]

Yo you need to put out a "Whats the Numbers" t-shirt. I'd buy one

[@Marvelkid87]

Already in the works

[@59poppN]

Khrome werks 2 into one sound Great

[@HulkSmash76]

That bike is 🔥🔥🔥

[@hectorsantiago321]

Nice bike. Wow👍👍👍👍

[@J.3.T.Z.]

Recognized that bike right away. #reefbluegang

[@ericnay7733]

I also have a reef blue 2022 road glide. Bassani 2-1 mid length, zippers 468 cam, Arlen ness big sucker. 110 hp and 119 ft/lbs. I love it. Also got the tbar set up. Drag specialties 8.5 pull back risers with thrashins mid bend bar.

[@Centralthabiker]

great video bike sounds great

[@Marvelkid87]

👍🏽

[@jasonkimble8926]

Khrome werks, D@D exhaust. I recommend.

[@Andrewoval]

I'm starting to get the bug, no one ever has enough bikes.... and garage space

[@Marvelkid87]

😂😂😂😂

[@dylancoric1194]

So that thing has a 107 motor?

[@Ammo_HD]

Yuh

[@JavierBlanchardBJJ]

Nice bike but I don’t think those are mid controls check out my bagger

[@jegonzalez6524]

Very low numbers. Why is that?

[@Marvelkid87]

Bike is a 107 dude …. Compared to the stock numbers the bike comes with this is pretty good

[@jegonzalez6524]

@@Marvelkid87 I get that but for a m8 the numbers are very low unless I got it wrong. Did he said 107 torque? My old high mileage 103 with cam, pipe and cleaner (tuned) made 117 on torque. That’s why I’m saying the numbers are very low for a m8 with that cam

[@TorqueCustomCycles]

This bike increased by over 30ft lbs of torque from the stock base run almost 20 horsepower. I’ll take that from a bolt in cam.

[@GhostRider03]

Wicked cams that's for sure but if you're planning on doing a 3030 with stock valve springs, pushrods and rocker arm I'd suggest against it. Anything above a 475 lift should be done with all the extra strength in hardware. Just my opinion anyway. Always hear about guys putting 485's or bigger in their m8s with stock or adjustable pushrods and it never ends well

[@Smokedilla]

How do you think that cam compares to the S&S 475c?

[@duffy7029]

Depends on the bike, 475 on a softail all day, for a bagger 107 or 114 the 30/30 cam

[@Baggerdaddy702]

@@duffy7029 hey bro are you using the hd board to peg conversion kit on your bike?

[@duffy7029]

@@Baggerdaddy702 yea it kinda puts them like the further forwards that they had for the dyna lowrider, they’re in between a mid and forward control

[@tedmen1123]

DO NOT go with D&D. Their quality has gone downhill so badly since the pandemic and they don't stand behind their products. I went with the Bassani Road Rage 3 full length and I get it back any day now. The khrome werks pipe is wonderful as well with a lifetime warranty. Unfortunately Bassani and Khrome Werks came out with black chrome 2-1 pipes like a week after ordering mine. Im putting in star f35 cam, bassani 2-1, HPI 62mm TB&M, 5.3 injectors, and trask air cleaner. Hoping for 127hp atleast.

[@patrickcannon767]

I think this just goes to show how the special just isn't worth the money especially if you're building a performance bagger. Hands down the Bassani pipe is the best pound for pound quality, price, and performance. HPI is great but its almost 2k, thunderheader is the same price but the bracket is garbage (sounds amazing though), TBR is great if you're on a budget but the welding is sub par, and all the rest are just copies of other pipes. My only criticism of Bassani pipes are that the new "superbike" pipe just looks like they copied the HPI. I have never ridden a bike with a D&D so cant really comment on them but I like what I see.

[@BlancoFlaco]

HPI pipe hands down

[@jayi.4687]

Sounds great but their numbers suck

[@williamrose8944]

I did the Star 30/30 with a S/S 55mm aluminium intake, Arlen Ness Big Sucker, modified stock pipe with tab4.5 mufflers/ 2.5 baffles 2 into 2 got 117 hp & 119 tq , I almost went with the s/s 475

[@pnutz__]

That sounds about right for a 117..I’m doing mine next week so we’ll see. I’m doing the star .572 ..expecting more hp and slightly less torque. I want that highway power 😂

[@fudawgable]

@@pnutz__ he didn’t say it was 117ci said it made 117hp

[@pnutz__]

@@fudawgable gotcha didn’t see that lol. There’s way too many variables when discussing numbers. That’s why I don’t chase them lol. One dude said he had 130torque on a 107 with a cam but he won’t come to the dyno to show his numbers ..people bs 😂 just for click bait

[@fudawgable]

@@pnutz__ lol yeah only reason I’m here is cos I have a 117 and wanna do work to it, had a 107 street bob before and there all allgood

[@pnutz__]

@@fudawgable I’m doing my whole setup as we speak. Stay tuned for the magic numbers 😂 ..it’ll probably be done by next week

[@RoderickCross]

Check out the D&D

[@angelvazquez2112]

Those aren’t mids, they still look too far forward

[@Marvelkid87]

Yea I called them mids by accident 😂 kinda mids/forwards

[@pnutz__]

They sit almost like the lowrider s. A further mid setup ..

[@Baggerdaddy702]

@@Marvelkid87 just curious I remember you saying you were 5’7 (I’m the same height), does the pegs feel toofar forward on his bike ? Im planning on doing the same to mine

[@telace1]

D&D

[@pedrofernando176]

✌👍

[@jasonkimble8926]

Numbers aren't all that, 475 still better all around. 118 tq with 475cam

[@pnutz__]

Numbers are for bankers …a lot of these high number bikes being done by famous tuners are getting rebuilt motors here from blowing up.. I’ll take a smooth power band over inflated peak #s all day

[@ClutchwalkerHD]

I don’t think those are mid controls. He lied to you.

[@vernegibb621]

😎

[@chrismichie7162]

Those aren’t mid control pegs

[@BIG_SmokeVtwins]

Those ain't mids

[@THEM_ROBINSONZ]

Those aren't mids 😪

[@Marvelkid87]

Miss/forwards in a way 🤷🏽‍♂️

[@THEM_ROBINSONZ]

@MarvelKid87 yeah they are forwards but look good. 💪😎

[@davidfink9729]

Those numbers dont sound to impressive.