@RobbyLayton

Just the beginning. Getting the cab and front end cleaned up and torn down off the original frame. Start fitting, measuring, and beginning the concept phase of the build. Please understand this is all a process and will take time to gather up parts and then get started on a little later after busy season has ended in Moab. Thank you everyone for watching and supporting us.
Shirts and stickers available at www.trailmater.com

[@donwilliams3626]

I jumped back to refresh my memory of that happened in part 1 before I started watching part 2.

[@RobbyLayton]

Function over fashion!!! I don’t want trailmater lifting this out or off of trails I want to drive in help and drive out!! I new you had the team to build this truck to its ultimate potential and I can’t wait to see what you guys do to it!!! Thank you for doing it!!

[@stuartsim5324]

I know it’s not a Model T but Trail Mater and Tin Lizzy would be a pretty neat pair.

[@kiwijeff3964]

Not much being said about this build... will be an awesome truck when it gets done.

[@tenglish420]

Wonder whats happening with this

[@barrybazza176]

I love how Rory can drive millimetres away from a 10,000ft drop whilst steering with one hand and drinking from a can of soda with the other without flinching....then a tiny Lizard scurries away from him and he turns into the fastest moving object on Earth 😅 Keep up the Fab content Rory and the Moab Team 🦎

[@gapster46]

"To those I’ve offended, I apologize. To those I haven’t, hang around. You’re times coming". That should be a t-shirt.

[@daviddaw999]

I have been looking forward so much to this build. I am an avid fan of Matt's and Fab Rats' builds, and this has the potential to be superb viewing. Not only that, but I am going to learn a lot about Rory's engineering philosophy - and that can only be a good thing.

[@charlesirby9222]

Agreed 100%...can't wait to have a peek inside Rory's head! 😎👍

[@deandennis2838]

Very well stated!

[@craigbowley6783]

That's one of the big things in looking forward to myself$

[@calholli]

I can tell you his philosophy: "Iterations" -- Run it until it breaks, upgrade as needed, keep using what works and discard what doesn't work well; Iteration after iteration; trial and error. The scientific method. After years of that happening again and again, you end up with Trail Mater. and As you can see, Paul is basically copying Rory's two trucks. He's narrowing the hood just like Trail Mater, and he's using a hydraulic boom in the back, just like Old Blue (Rory's other wrecker). Matt is going all out and trying new things -- but it may end up not being very useful on the trails-- we'll see. If not, it still makes a cool sand wrecker. It will be fun to see them all on the same trail some day.

[@rudiekeyser2495]

True words 🇺🇸🇺🇸👌

[@earlholt4489]

I have so many builds to watch now. Matt’s off road, fab rats, and now you guys 😅😅😅 I’m currently rebuilding my Baja bug and can’t get away vehicle builds… (I watch these videos at lunchtime at work) this universe is saying build it faster this could be you…

[@everettdegrasse8478]

There is a big difference between restoring an antique and building a working truck that looks like an antique. What fun this is going to be watching you figure out all the details.

[@lonhoschar1943]

Great news!! You're getting started on the old "Robby Layton" wrecker!!! That thing is going to be SOOOOOOOOOOO cool!!!

[@jackthedip]

Yes 🎉🎉🎉 I have been waiting for this exact build

[@kenmurray4232]

I can just hear the comments, is it done yet, is it done yet. This will be coming from those that have never built a custom vehicle. As much as I am a Ford person you are right. Older small block Chevy kick a$$. The V 10 Ford is nothing better than a boat anchor. Looking forward to this as it comes. Thanks for sharing. Have fun at trail hero

[@scottmiller2455]

Take your time. Gives me something to live for😂. Also the V 10 never missed a gas station. One of many thing they can't pass.

[@dingmanracing]

Thank you guys for posting. Sitting here in central Florida.. after Ian....no power..no TV.. no nothing.. thank God for your videos!

[@captaintoyota3171]

Man A AA wrecker... i love the look of that thing

[@1yamawai1]

soooo many quotable quotes. great video full of love and info as usual

[@dieseldood]

Oh man... I miss shop talk! And I'm sure you guys edited out plenty.... 20 years as a Tech, and I destroyed my shoulder. (let heavy shit fall!) I'm looking forward to that side of the build as well! And yes... V10's are good for one thing. Taking gas and turning it into noise!

[@kirk467]

Take your time Rory! 😂 lol I’m just glad y’all got her in the shop now, I’ll just wait to see the updates and videos on the Robby Wrecker! 👌🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@albertdehn8381]

So glad that you started take your time and take me along thanks for sharing 👍😀

[@peteragrapides6924]

This is honestly the best channel on KZbin. It is fun to see your adventures and the passion you have for your work, as well as your honesty and integrity. Keep em' coming!

[@petekenyon9442]

To cool for school! (Russ) Just a viewer here but Rory can drive good too.

[@richardwoodworth549]

That truck is going to be so cool, can't wait, be better with a 302 in it

[@someonewhocares5712]

Diamond billed Lizard picker upper. New name for wrecker. Ha. Thanks for sharing 😊😊😊😊😊😊😊😊

[@sumosteve665]

Lots and looooots of "chippy choppy" and "weldy weldy" gonna happen on this build. Going to be great!

[@bigjeep2195]

That might be Ed's first truck.....

[@PatMontag]

love to see people still using older power. it just works. i have to watch more of this now.

[@peteracke2209]

As soon as you put that cab on the new chassis...you can see the dream..can't wait for the next episode...I'm doing a 1937 international on a Pajero frame, smaller vehicle project but just as cool..

[@bogwin9621]

My grandad had me cutting metal from cars from the twenty’s and thirty’s for projects. Everything looks familiar. I was a child. Takes me back. I can almost smell the old car smell. Good work from my viewpoint. Thank you.

[@patrickweaver1105]

I suspect his thing is going to take as long as the Golden Nugget if not longer. The body is going to need some major work. A 302 would have be nice but I have no idea if it would fit. You have to work with what you know so I'm sure I'll love whatever you do.

[@Jrryclmnjc]

I’m sure Robby will say “ you build it the way you think is best”. That’s why he hauled it all the way to Moab. Because you are the best.

[@blakethornton6390]

Just remember Rory, the longer you take to finish Robby's tow truck equals more KZbin content. I wanted to see the Golden Nugget finished, but when it was finished, I didn't have those videos to look forward to. You do you and keep us all entertained! Thanks to you and your crew for bringing us along on your adventures.

[@williamd1891]

Shhh 🤫 Don't tell him to milk this cow as long as he can.

[@TakkiMann]

I think Rory is the realist of them all because he keeps it a buck 💯 with everything and everybody. He doesn't sugar coat ish!!

[@donwilliams3626]

The engineering genius of the AA is the genesis of this build. You will have to remain at the top of your game because the lizzard is watching you.

[@deltavee2]

The Lizard needs a name. After all, during the tow he was the fastest lizard in Utah! And for all we know he'll just spend the winter in a corner of the shop ticking off the progress list on the Studleybaker.

[@JonathanScott]

That pin has to be worth something to a collector! Finding it in the truck is even cooler!

[@messianichebrewshawnkawcak1550]

Robbie’s tow truck is going to be awesome I am sure after the fabrication journey. I assume robby will sand blast and paint that truck. Playing mix and match is definitely a challenge, it test your skills.

[@nicholaskelley4191]

Ive been waiting for this video, new subscriber here, discovered y'all because of robbie, keep it up love yalls work

[@MadWiking]

One of the best build series ever!! Thanks to Rory and his crew!!! Best regards from Norway!

[@danrussell3439]

It’s a joy to watch Rory think and design out loud. Only a person who knows what they are doing can do that.

[@delandbrooks3291]

People were extremely frugal during the era when this truck was built. During the Model T years (just before this was built) Henry Ford specified the size of boxes the parts for the vehicles would be delivered in. Those sizes were the ones needed for the wooden floors and other wood components. Just one of the innovations that made Ford a cheaper vehicle to build and a cheaper price. This will be an epic if long term build. The sbc is probably the best choice for anything with limited space and a need for performance (especially cost wise).

[@jaybird4095]

I am intrigued. I would love to see the old instrument cluster back in it and working. That would give it just the right look.

[@carnyzack]

So are you, Robby and Matt all competing for coolest off-road wrecker build ever?! I honestly couldn't pick one over the others.

[@thisnang6515]

It's fun to see these tow truck build off. Matt's, Paul's, and now Rory's for Robbie. I'd love to see how you will build this up.

[@francesrice7898]

❤️. These end so soon. You all are so interesting and fun. Rory, what ever you decide will be perfect. With the three of you working on it What one doesn’t think of the other will. God bless you all and be happy. ❤️❤️🙏🙏👍👍❤️❤️

[@ToddAdams1234]

Are you SURE that you’re not going to have Robby’s truck done by….THIS AFTERNOON 😂😂. JK, but I AM interested to see how this turns out for you/him. I love watching your videos Rory, just please DON’T ever let us down by not keeping us entertained and educated. Because I promise you, WE ALL LOVE IT!!!!

[@robertquackenbush5547]

More like this weekend

[@ToddAdams1234]

@@robertquackenbush5547 aww, I really wanted it done in 3min 🤣😂😅

[@robertquackenbush5547]

That's not going to happen when they're going to ve at trail hero

[@Denpachii]

Please, stop harassing him. You well know it might take as long as three weeks.

[@robertquackenbush5547]

@@Denpachii nobodies harassing him fool

[@KRAVER_]

I have been waiting for this truck to start. cant wait to see what finished product looks like.

[@nickmcd-ck6vk]

Man i can't wait to see the old girl on the move once again.👍🇺🇸👍

[@benschlack5814]

On a side note the shop looks good, it's come aways since you moved in, nice 👍

[@bicross87]

I only saw the tittle yet and i already know it's gonna be a good one ! Thanks Rory and the team :)

[@bicross87]

Ok, now that i watched, i will be here for the rest, as i'm not offended yet ! A promise is a promise :D

[@billtheunjust]

Not just the cracks in the tow arm, but I bet there is plenty of metal fatigue that can't be seen. Definitely the right choice to build a new one.

[@paulbrowning7186]

To all the impatient nannies, set down and watch the master builder work a master piece 😅 it’s going to be an awesome tow rig👍

[@joannaquarton2366]

Oh Rory take as long as you like because it's going to be fantastic watching xx

[@turbojunki]

The channel is getting better and better every week it seems

[@NeonFreakC]

i'm loosing my mind because it's going to take a while - awesome to have another build series to watch every now and then

[@dalegnodle]

The V-10 served a purpose and you called it, Rory. Boat Anchor. I've had lots of small block Chevy motors in everything from a '63 Landcruiser to a '74 Camaro to an '89 GMC 3/4 ton 4x4, etc. No way to go wrong with them. They make adapters and accessories for everything you care to do with them.

[@randyc4959]

I think you are right about making another boom/winch setup. Anyone that has tried to marry frame materials that are more than two decades apart can vouch for the fact that there is a huge difference between the two. In short, modern day frame materials are a lot more durable. And that winch, though the creativity of the person that built it could be admired, the materials it was made from and the welding means it's place is best where it was, most likely, most used - in the junkyard itself (and that done with extreme caution). Even current era frames can have a big difference between them, in regard to flexibility. A utility bed manufacturer I delivered for started putting a wider gap between the factory cab and their beds on the Dodge chassis, because the flex that was engineered into the frames could cause the cabs and beds to foul each other if the trucks were towed while loaded to max capacity. Have fun with it. It will be interesting to see how this develops. I'll be looking forward to seeing how you get power to your tandem rear axles on the 6x6 build. Probably not at all like I'd planned for mine ... but you probably won't have the advantage of having "double-deep 5 under."

[@huffy737]

Sweet build. Can’t wait for part 2. Weekly updates? Even if nothing is done, lol just tahdah same as last week see ya next time!

[@Patrick.Weightman]

Finally an update! I was starting to wonder if the project was abandoned, literally no one has talked about it since you picked it up, not even Robby

[@timothygeiger8271]

Been wondering when Robby's wrecker build was going to begin. This will be an interesting project to follow😆 Between Matt's, Fabrats, Robby, Chad's Fab, this, & add Rudy's we have automotive builds to keep everyone busy🤣🤣

[@georgedeedsnotwords2162]

The only thing better than watching you do this , would be to be there working on the build ! I get it you need to set pieces together to see the assembly order . Get-r-started ! 🍻

[@trutheye1]

Hey Rory, we were the people that almost got in your way with the silver RV, as you were towing the old tow truck. We were stopping by to meet you and tell you a story, but you guys looked busy and I didn’t want to get in the way of you shot. Love you guys.

[@trailmater]

Should've stopped and hung out for a minute. Never takes us to long to find a minute.

[@trutheye1]

@@trailmater Thanks for saying that, I should have. I wanted to tell you that when my wife was going through chemotherapy treatments last year, times were tough and so I would watch your recovery vids during that time and they very effectively took me away from my problems as I imagined being there with you doing those recoveries. It helped get me through those times so thanks for being you.

[@robertr4193]

I've been looking forward to this build. I't going to be interesting to see what you do with this old truck.

[@edwicks]

Rory , bro all the fans of the quad 4 , Yourself , Matt's , Fab Ratts and Mr. Layton all know Robby's tow is gonna take a long time ! Just like the Golden Nugget ! You all have buisiness' to run and jobs to do ! Lives to live , just more content for us to enjoy !! Keep doing what you and your crew are doing ! We'll be here watching !

[@ldvan100]

Good God have you bitten off a mouth full with that project... I'm with you for an old school small block for power...

[@jimepperson2075]

I love your channel because you keep things simple. No flashy make believe stuff. I don’t like how other channels show off how they think they are the best by flashing all their expensive rigs. You are down to earth people. All their money and give aways don’t impress me at all. Rory you are the best.

[@greggbrew305]

Robbie definitely got the right shop for this build. It won't be a trail mater but it will be awesome.

[@Buck1954]

I'm not losing my mind. I'm 68, my mind is almost lost. I agree with the plan. Small block engines are great!

[@maxironpaw]

Love the little post-ending vignettes.

[@rogermontee8264]

Rory this build is going to be great!!!!! I like the idea of using the iron block 350 chevy very good choice. You have a great crew. Safety is differently number one. Thanks again for sharing.☺️☺️☺️☺️☺️👍👍🇺🇸🇺🇸

[@jeffclark2725]

All good things take time, this is ganna be a cool beast when its done, anticipation is killing to see the progress, Thumbs up, Take all the time you need

[@rickdavidson3534]

That truck can only be named Tin Lizard.. Has to be, to honor your new shop mascot!

[@ValleyWestHandyman]

I don't think you've hated on the 4.6 L 1UR-FE V8 in my GX460 yet. Thanks. I also love the little clip after the "credits" it's like an Easter egg. 😂

[@brianellison3525]

Now I think I need to build my Mower Wrecker. I've built everything else I can think of for our race team and my swap meet cruiser, the Mudder, and my mini JD Tractor. Watching you guys build your tow trucks has got me thinking. Kinda like Cars and Cameras did the budget jet boat. Be well and have fun, all. Ill catch ya later, Mater.

[@happycamper5900]

You have me hooked. I look forward to future videos of this build. Thanks!

[@joelmurphy7980]

Never thought I'd see the day when I wasn't pukin' sick of small block Chevy swaps but the LS currently holds that honor. Gonna be a cool 'ol truck.

[@petelemke6365]

If it takes years to build I'll be here to watch every single episode.

[@watsup1350]

I'm pushin' 70 a bit here. I grew up on a salvage yard back in the 60s and have seen a few things go horribly wrong. I appreciate your attention to prevention of needless calamities!! Make it work safely. Take your time as you get the details right the first time. ya doin' good!!

[@terrallputnam7979]

Rory, We know that this is a side project. We are excited to see it begin. I love Rory's skepticism of the super Sketchy Wrecker cable drum! You guys crack me up!

[@tamberp]

That boom and homebrew winch are something else! It's absolutely the epitome of "don't have it? can't buy it? build it!", but maaaan... Safety factor: Low. Sketch factor: High! (Safe Working Load: Until it starts to bend, then back it off a bit!)

[@rudiekeyser2495]

@@tamberp👌 but it got the job done. Those days nothing came from the self and had to be made.,🇺🇸🇺🇸how awsome. Cheers Cape Town 🇿🇦🇿🇦

[@garyinman5400]

The absolute best U tube channel hands down looking forward to this build.

[@Burke_Motorsports]

So excited for this build that I have to sit on my hands to keep from clapping. Cheers! ✌

[@marvincarter870]

Ok things are starting to pop at Trail Mater garage and Robby's tow truck is moving forward! I love Rory's take on the Chevy small block because it has proven over and over again that it is the go to engine for Rod builds etc. Rory is right this will be a time consuming build and it won't happen anytime soon. Looking forward to later videos on this truck!

[@TheImmortalsCa]

Right on! Was waiting for this!! Love this channel. Just some real, fun wholesome folks. Never change guys! No matter how big you get. You rock!

[@davidmufferi6198]

Rory I love your contacts you’re down to earth builder keep it up and stay safe

[@loosemoose9799]

Rory I appreciated the emphasis on safety. Nostalgia is good but as always safety wins the day. Trying to maintain nostalgia can be disastrous.

[@Jammer.1]

The 3 of you make a great team ! I'm ready for a long winter here top of indiana so there is a lot hours to watch the builds !

[@TheScoundrel70]

Patience grasshoppers! You can't rush cool, and there's a LOT cool going on here, from the truck, to the build, to the builders 👍👍

[@petejoy6328]

You got to love the ingenuity of whoever built the wrecker boom!!! Run whatcha brung!!

[@leroyll1144]

its amazing ,they built this great country with that technology!!!!!

[@jeffjefferson6229]

Cannot wait to see that truck it's going to be sweet

[@misharoy284]

I love watching the process and the teamwork in your shop. The quality of your workmanship is awesome. I don’t plan on missing any episodes. Thanks for being a great KZbin channel along with Matt’s Off Road Recovery and Fab Rats.

[@1one3_Racing]

You know what this means? While everyone else is scrabbling to finish thier wrecker builds, Rory casually pulls in a customer build and starts on that. This means everyone is trying to be like Rory!

[@wesleypainter2657]

I'm just happy for the amount of viewers, views and the content to ur videos. you always say thanks but THANK YOU. I've been to moab once. all I can think of is getting back. im in Texss we have some trail's definitely a different place. no public land nothing compares to what Yall wake up to.

[@dennispalmer6007]

Good to see the Layton wrecker in the shop. Looking forward to following the build.

[@trubass75]

To be honest. I never even thought about his wrecker. I'm tuned in for your stuff. But, The RLN wrecker build will be cool to see as it goes.

[@kennyFF033]

This is going to be a cool build to watch. Take your time and do your thing, I'll make popcorn and grab a beverage ;-)

[@daveneil3963]

That truck is awesome, I can't wait to see this build. I already know it's going to be beautiful. Thanks for sharing with us. That was something to find that "Roosevelt" button under the seat. Can't wait to see how that is incorporated?

[@brentziegler5991]

I understand that this build will take some time but I've got a feeling you'll still get it done before Matt!

[@fredkroldart7859]

Lol

[@EL34XYZ]

Matt is too busy figuring out how not to carry any tools on the recovery vehicles. And forget about the running out of gas situation. :) (I give Matt the same feedback on his channel)

[@calholli]

oof ... Shots fired

[@allentisthammer4763]

You guys slay me! Please don't change! Sitting here with my "Diamond Billed Rock Peckers" shirt that just arrived and enjoying listening to you three working up a great build. I avoided Moab during the EJS in June and played out at Hurricane and Glendale instead, I don't do large crowds. That being said, I'm looking to head your way next year prior to EJS. Robbie's in for a real treat and he knows it and so do we! Awesome people!

[@palooka6115]

HoooRay ! The SalvageRex is underway !

[@jamesbyrge6484]

Shawn seems like super cool dude! He's a great Team Member

[@Krawlergarage]

This is awesome. Taking something old and making it new again. It is going to be fun to watch.

[@jeeper426]

i'm really loving the look of the headlights on the back of the cab being used as work lights, i think thats a really awesome touch and this is going to be a sweet rig when its all done

[@mikemiller3007]

I’m really hoping they can find some LEDs to fit those old housings

[@notyouraveragegoldenpotato]

Noticing movement and jerking your hand back is the correct response. I loved catching lizards as a kid. I was in Arkansas visiting family and thought I saw a lizard tail poking out from under a rock. I flipped the rock and grabbed it real quick. It was a flipping tarantula😅🤣 lesson learned

[@patrickhartog2850]

Hard-working man, Thank you for your honesty and the jokes you make about the comments. I love watching your videos. Keep them coming😃👍🏻 greetings from Holland