Overlanders & Off-roaders Must Have Mod! BUMP STOPS

[@trevorfroese4534]

I have been running them for about a year now. Huge difference when you bottom out your suspension. It's more of a progressive smoosh than the previous Wwwhhhaaamm!!! Money well spent.

[@RobDaman]

When hitting some shopping mall dips and the rare offroading trips I take I noticed a lot of abrupt bottoming. I got these bump stops from Duro Bumps to help keep my teeth from jarring too much. 😬 check the description for the 10% coupon code!!!! And as always I appreciate your support!!!

[@supersaijan4]

Rob Daman bro what size was the rear bump stop you used for this install? I don’t remember you saying in the video. In the website they offer 3.5”, 4.25” & 5.25”

[@RobDaman]

I didn't because it depends on the lift or not. Mines the middle

[@supersaijan4]

Rob Daman ok👍. Im having my suspension installed soon & looking at getting these bumps. Im getting the OME EL095R paired with Kings Rear shocks (Adj/Ext), figuring out which size to get.

[@RobDaman]

That's a 2 inch lift if I recall. If so get the middle one like me. The tallest one is for extra height that you're unlikely doing. Don't forget to use the c coupon code

[@supersaijan4]

Rob Daman 🤙🤙🤙 thanks I will.

[@lenio2577]

Congrats on the Duro Bumps, I have been running these bumps for 3 months now and very pleased with the product, the only difference is my set up is the full flip kit. Great at absorbing the bumps and awesome customer service, good job Duro bumps !!!!

[@RobDaman]

Thanks. Awesome product

[@alexanderlowe4236]

I love the old school TRD decals

[@RobDaman]

Thanks. They were huge hit at SEMA

[@informedcitizen8687]

Good advice on an item that is often overlooked.

[@RobDaman]

Thanks.

[@KEVING1TIME]

nice,, yeah this is something to keep in mind.. I hit my usual dip and hate how hard it hits.

[@RobDaman]

Precisely. The difference surprised me.

[@UncleFjester]

7:45 Your nucking futs if you believe Ubolts stretch

[@RobDaman]

Feel free to argue with the professionals here beattiespring.com/blogs/knowledge-center/the-biggest-u-bolt-question-we-get#:~:text=While%20the%20U%2Dbolt%20has,threads%20stretch%20out%20under%20torque.

[@dennisgpe.2057]

Thanks for the discount code. Just ordered a set and subscribed to your channel. Keep up the good work!

[@RobDaman]

Appreciate the sub 👍

[@ericbarkhurst2951]

That was a ton of locktight!!!!

[@singletrackftw]

I put wheelers superbumps in my truck from the beginning. Very inexpensive and very effective. Most people don’t buy them.

[@RobDaman]

i've heard a lot of positive reviews about wheelers

[@singletrackftw]

Rob Daman yeah, nothing negative you could say about their superbumps. They’re height adjustable with spacers that wheelers sells, which is a really nice feature. The spacers are also very inexpensive too

[@SAPPER510]

I'm running stock bump stops for now.

[@RobDaman]

I've had stocks for over a year myself.

[@agustinherrera5600]

Ok thanx ill look into it . Where can i get those ? I clicked your link but page wasn’t working

[@Bagel_Biscuit]

Nice graphic/pinstripe on the side where did you get it?.

[@RobDaman]

I got them done at a local shop. I did a video on it how it was done. kzbin.info/www/bejne/kJ-UdJ-XeLF-bLM

[@T25de]

Just bought a set of wheelers B stop for my land cruiser 100

[@RobDaman]

Awesome

[@matthewglazier7043]

Just ordered a set. Thanks for the code! 👌🏻

[@RobDaman]

Thanks for watching

[@SailorHeck]

What size u bolts do you need with expo leafs/ flip kit... Durobumps has 3 different sizes

[@RobDaman]

Reach out to duro bumps for help they'll set you up 👍

[@jessemartinez90]

Maybe on Instagram and or face book tou can take a pick on how they look wile the truck sits on all its waight.. but great vid

[@RobDaman]

Thanks. For it to contact it have to be recorded in motion. But duro bumps has videos. Here's one on IG instagram.com/p/BwhiLM9h-K3/?

[@ProjectOnix]

Another good content. Very informative. Good work! 👍

[@RobDaman]

just trying to keep up #fancy 😂

[@ProjectOnix]

@@RobDaman #doublefancy 😎

[@thomastran967]

Another great vid Rob what height did you pick for you bump stops?

[@RobDaman]

these are the taller ones since I was bigger than stock.

[@mikeholbert1958]

Great video. Keep them coming

[@RobDaman]

Thanks! Will do!

[@TheNightSnacker]

For the rear you just left the wheels on the ground right?

[@RobDaman]

Correct

[@metub916]

@Rob Daman does this kit include with u bolt

[@RobDaman]

They do indeed. Their site explains the measurement to take

[@metub916]

Rob Daman thanks and thank you for the 10% too

[@RobDaman]

Awesome

[@Slking507]

Torque for the ubolts is 52 ft lbs, not "80-90"

[@patricksmith8930]

Holy loc tite! thats a lot of thread locker good lord

[@ericbarkhurst2951]

LOL I said the same thing... you just need a drop or 2. God could you imagine if that was red loc tight - that thing would never come out. LOL

[@Spookycasual]

by the end of the year ill have a constant load between 550-800lbs between my rear HC bumper, GFC, and all my gear in the bed. have deavers stage 3's. should I stick with my rear durobumps or move to sumo springs? I dont tow so i think ill be good?

[@RobDaman]

see how it goes before considering a swap.

[@GhettoFabulous670]

Have you ever bottom out or over extend your shocks with the new bump stops? Asking because I notice ur lifted with extra travel and it makes me wonder. Thanks

[@RobDaman]

The bump stops prevent bottoming out. No issues overextending as I don't drive too fast offroad

[@christopher23.]

Do these bump stop shocks bottoming out in the front ?my vehicle bottoms out since I have eibach coils on it. Or do I need some bump stop spacers?

[@RobDaman]

Yes. Reduce bottoming hard. I drive through road dips at 40 mph.

[@agustinherrera5600]

Hey found some other bump stops the super spring / sumo springs bump stops have you heard of those ? Which would be best between these and the ones you have ?

[@RobDaman]

those are for overloading. think of them like airbags without the air. if you're not overloading stuff for traveling only, they're not necessary. it really depends what you're trying to achieve. durobumps aren't for overloading your bed.

[@agustinherrera5600]

Ok i wasnt sure , i want them just for daily driving . Sometimes i carry stuff in the bed not not much . How tall are the rear bump stops you have ?

[@RobDaman]

@@agustinherrera5600 mine are the middle ones because of the lift toyotabumpstops.com/product-category/tacoma/3rd-gen-tacoma/

[@speterbilt]

Dude sweet brake rotors. Do you still like the fox shocks and does your tailgate dust seal still work?

[@RobDaman]

Thanks. I'm gonna talk about them soon. I just changed the pads for further testing. I have TRD pro Bilsteins. They're still holding up but I am making a change to the rears... stand by. I'm still trying to catch up in my videos. Yes the seal still is good too. Happy Friday

[@speterbilt]

@@RobDaman awesome. I ll be waiting for it. Thank you

[@sonnypiczon5077]

Dumb question, but can the fronts be installed w/o removing wheels or lifted ?

[@RobDaman]

it's a valid question. There's not much room to work with so yes the wheels will need to come off. thanks for commenting

[@sonnypiczon5077]

Rob Daman thanks . One more thing , blue thread locker on the rear u bolts ?

[@RobDaman]

No. Just torque to 85 lbs n check it on 100 miles and once in while especially before offroading trip

[@lonesomerealms]

Rob - which shocks and coil overs are you running - Bilstein model ?

[@RobDaman]

TRD Pro front. 5100 rear kzbin.info/www/bejne/bJykZXZnabail5Y

[@integrags1]

How many inches did you go with for the rear durobump stops?

[@RobDaman]

It's their "medium" version

[@agustinherrera5600]

Hey man are these better than timbren brand ?

[@RobDaman]

good question. durobumps are patented 2 stage rubber. i think timbren is good but i think their rear bump stops are also meant for overloaded weights to rest on it sometimes. I may be wrong but I think that's how Timbrens work. Durobumps are for short contact.

[@Donkarnage223]

Does this bump stop make constant contact with the frame due to its height?

[@RobDaman]

good question. no it doesn't. I also swapped my leaf pack under warranty and it's taller now.

[@Donkarnage223]

@@RobDaman thank you! sorry i did not see your reply. i installed the durobumps with my Alcan leaf pack weekend before last and it works beautifully!

[@RunGSD]

Still liking these?

[@RobDaman]

Yes. Very good product

[@irvinsalas6020]

Did you get the 4.25 sized rear bumpstops or 5.25 rear bumpstops?

[@RobDaman]

middle one so 4.25

[@eljefe1813]

Is this an older video because I thought you removed the pillar vinyl?

[@RobDaman]

Yes I recorded a few weeks earlier. I've decided when I do product installs that I wait a few weeks before airing so I can test it out and be sure there are no issues.

[@delvinpineda4478]

How they holding up?

[@RobDaman]

I no longer have the truck but new owner has no issues

[@carlitoswayz-Okan]

Are they worth it for mall crawling? Haha

[@RobDaman]

Absolutely! The mall is a dangerous place. 🐘🦕🦈

[@carlitoswayz-Okan]

@@RobDaman 😂 Sold!

[@TheRealJimmy831]

It seems like the bump stop gives you less clearance is that the case for you? (Since it sticks out further than stock)

[@RobDaman]

actually no because I have a lift. the stock bumps are for stock height.

[@TheRealJimmy831]

ah makes sense.

[@tjvance78]

Thanks for the video, the coupon no longer works.

[@CHARAHUESCA]

IMO useless parts, just put in a camera on the frame and see how it affectsthe running of spring....

[@RobDaman]

Thanks for your comment. There's plenty of videos on bumpstops with cameras on em. If you're just driving along on smooth roads, aftermarket bumpstops have zero advantage but if you offroad or approach large dips without slowing down you can tell the difference. Also when adding extra weight it helps prevent a harsh bottoming out.