MEQUIAR'S PLASTX REVIEW/ HEADLIGHT RESTORATION!

IN THIS VIDEO I SHOW HOW TO RESTORE SOME OLD FOGGY HEADLIGHTS.

[@russellwade7810]

Iv just used exactly the same procedure on my vans headlight and they was bad but i used a sponge to polish on the drill and they are like new. 👍

[@donnovicki9771]

I used this on my gauge cluster and it did a bang up job. Haven't tried it on the headlights yet.

[@STILLNIGHTPEARL]

Nice work man! That looked like an etching on the outside of the light, looks like a chemical of some sort dripped down, you can scrape it down with a razor, then sand with 600,1000,3000. Scraping it down with a razor is faster than sanding, it’s what body shop guys do to flatten runs after a paint job, works quick. If you would’ve sanded longer with the 400, you would’ve removed it completely, but the razor does a much faster job.

[@vincegraves1176]

Loving that bruh 😊 I just did mine with a terry cloth!

[@reowhite4862]

I used that kit on my girlfriends car and the headlights looked great....for about 6months then they went right back to looking like shit!

[@RobertG1690]

Sorry to hear that . Try using 400 grit. 1000, 2000 ,finally 3000 grit. Compound then the sealant. There should be no reason after that y it fails. Might be you didn't go all the way down to 400 grit . Many times 1000 grit is not enough

[@reowhite4862]

@@RobertG1690 I did do all those steps but it wasnt enough for the harsh Texas sun

[@MichaelBrianInc]

@@reowhite4862 how did you seal the headlight after compound/polishing? Clear coating can last a good year of protection or you can use Carnauba wax but that’ll last 4-6 months.

[@chrispinmwando225]

You needed to sealed them with a ceramic coat

[@masterjack8222]

Genuine question ,since you wet santed the surface, didnt it stripped the clearcoat ? So after the restoration the headlight have no protection right ?

[@linkstale]

Yep me personally I would add meguiars clear coat spray

[@buddahkahn6911]

U can spray clear for back in light

[@matthewreynolds2778]

Nice job bro looks great😎

[@RobertG1690]

Thank you👍

[@mistercool3859]

Is this a temporary or permanent fix?

[@damionhall8714]

I have a 2003 nissan b15 needs to get to that level

[@RobertG1690]

How did it turn out?

[@xXBetoXx956]

What’s that yellow pad name ?

[@buddahkahn6911]

It's a cutting pad light cutting pad

[@WillnorJimenez]

👍

[@ivanvelez7668]

wow awesome. I am thinking of restoring my headlights.But it's raining in my location. Is this best to do it on a dry day??

[@RobertG1690]

Yes

[@ivanvelez7668]

@@RobertG1690 can I use this product on the other lights such as the fog lights. turning signal lights both fron and. back??

[@reverscrypto7638]

400 is crazy on a headlight

[@kojam1]

I'm gonna wanna but I'm not gonna actually do a darn thing. Too much work

[@luisponce1472]

No need for Sand Paper i use 3d tooth paste

[@buddahkahn6911]

Toothpaste is worse plus it's temporary and in heat the chemicals burn it to the plastic

[@reowhite4862]

Wun dowzan Toodowzen...tree dowzen...

[@user-cq7gd5bo4m]

Lmfao 🤣

[@thelastmojican4480]

Not bad buddy