GODOX AD200 PRO FLASH GUIDE How to use the Flashpoint Evolv 200 Pro

[@intjonmiller]

THANK YOU for making this exactly what the title said! No unboxing nonsense, not a review of your portfolio, no ad in the middle, etc. Absolutely perfect for what I needed, and that gets you a subscription!

[@robhallphoto]

Glad you appreciated it! I do those things sometimes, but guides are always purely guides!

[@keystonebrotherb]

This is the best ad200 instructional video. So many content creators go on and on. You’re succinct, clear and concise.

[@AlainPilon]

I just want to say that this is the best explanation video I have every seen on any product ever. Doesnt waste time and go straight to the point. Thank you very much. Liked.

[@meredithembry8652]

Agreed!

[@jessedpoole]

I also agree. This was super helpful!

[@henryriggs2313]

So this is a lifesaver. Thought I could figure out all the functions of my new flash by bumbling through as usual but was struggling … this video is beyond helpful, thanks much!

[@jephdelorme5902]

Perfect amount of detail in less then 10 min...thank you!

[@neilk575]

Brilliant video, why can’t other KZbin videos be like this?!

[@xXC0deZer0Xx]

Appreciate you taking time to go through the F numbers in the menu section. That helped me sync it to my trigger. 👍

[@darylnd]

I've resisted these for a while, but it's time to pull the trigger. I'm thinking of a two-head kit with one or two extension cables.

[@smalltalk.productions9977]

a black friday purchase from adorama. thank you for the effort and the sharing. i am an appreciative subscriber. now all i need is to figure out how best to use the AD200! thumbs up.

[@ozguraydin5384]

Hi Robert, thanks for the useful video. I just got my AD200 Pro and started to figure it out with your video. You are mentioning that you made a dedicated video for F5 in the menu, I had a look at your channel but I didn't understand which video is it. Can you share its link please? Thanks in advance.

[@robhallphoto]

kzbin.info/www/bejne/qHLZqGmua9iYndU&ab_channel=Sharpen

[@shontroelstrup2023]

I just got the AD200 Pro and was lost, even with the manual. Thanks for making it all make sense. Now to figure out the X-Pro C.

[@paradigmshifter0146]

Perfect, I finally bought and received my evolve ad200 pro

[@MohiniUfeli]

Just got my AD200 today and this has been such a huge help. Thanks so much Robert! Now off to check your off-camera flash playlist 💛

[@eddiemonye6248]

Hey. How long it took you to get the hang of it? Do you feel like the strobe has improved the quality of your work since you got it? I'm about to order mine, so excited.

[@jorgeandres404]

Fantastic! One of the best photography gear “how tos” of all time!! Thanks.

[@bgva82]

Thank you! This is very informative and helpful...I accidentally reset the flash to factory settings and couldn't figure out what I needed to do. Turns out I needed to go into F7 and set an ID function.

[@tscott6843]

I’ll be watching this again when my unit arrives.

[@user-um4wc7bb3n]

Thank you. Nicely, clearly and simply done. The perfect guide.

[@4hpjethwa]

Thank you for the in-depth user guide of AD200 pro. I just bought the V1 pro and the AD200 pro. If I use V1 pro as master and Ad200 as a slave, with CHannel, group and ID matching I can only connect in Manual mode. In TTL they don't sync. I would appreciate if you can give me an insight of what I am doing wrong setting-wise. Thank you in advance. Subscribed and liked already !!

[@Jcthered]

Seriously, thank you.

[@CindyMBrown]

Great overview. Very detailed while being easily understandable.

[@johnnysins9978]

Very straightforward tutorial for beginners like me!

[@Jwitherow1964]

dud you save me a lot of time i am new to flash and just got 2 ad200 and a 400 pro i am learning fast as i have watched 100eds of vides on flash

[@richardpiekos367]

Thank you ! exactly what I needed ...cheers!

[@michaeltuffin8147]

Just got this flash. Using it in tandem with two Godox V1s.

[@JeffreyJDavis]

Thanks for powering through this like a boss. perfect and efficient for new owners with no added bullshit.

[@saginawbubba]

Thank you. Great video for a new user of a GODOX off camera flash.

[@christophermcbrown3846]

Best instructional video on KZbin that I've seen. Bravo! SUBSCRIBED.

[@DCFotographs]

Just got mine today. Perfect timing!!!

[@hstorey]

You are a legend dude - fast and super efficient!! Thanks

[@hazardstorms226]

What would I do without you, Rob? Thanks! Question please: Can I change the flash increment from .1 stops to .3? I feel like it's easier to align/makes changes to match with my camera when changing exposure? Like if I change camera exposure in 1/3 stops I want the flash clicks up and down to be the same #? Make sense? What do you think of this idea, does it matter?

[@misterlove7034]

Perfect, sweet and to the point. I love it!

[@aprilwynett]

This video was easy to follow and understand. Thank you!!

[@rank3937]

Thanks. Just Perfect info. that I am looking for

[@Nikolazjames]

Awesome video! Makes me so happy to be given information in this way. Thankyou.

[@SimoneForgione]

This really helped me Thank you

[@lecolintube]

Thanks so much for the Vid, very appreciated. Got a question for ya: I’m using a 200ADPro & XproC. I’m often off camera, remotely hand holding 200ADPro & remote triggering the camera -using a remote-, however I’ve found the XproC will override any setting I have on the 200ADPro. Is there anyway to stop this so the Xpro will simply trigger the flash & not override it’s settings? (Currently the only workaround I’ve found is to put the Xpro in APP mode (and not use the app) - but this seems a bit backwards? Is there a better or proper way to do this?) Thanks heaps.

[@Dididong11]

Would like to know the answer for this too. From what i know of godox system, if u change the setting on the remote trigger, it will override on the light itself. So the best is change your power setting on the remote instead of on the light

[@mesfeneegebre4511]

100 likes thank you so much

[@RM-hy5kz]

Thx 4 the straight down to biz and precise information 👍🏾👍🏾👍🏾👍🏾

[@MisterBrightsiide]

Thank you for taking the time to make this video.

[@deepakskram]

Your are my saviour ❤

[@hdmalith82]

Can you pls do a godox beauty dish comparison? BDR 55 & 55 Pro? Almost no info about them in KZbin

[@andrewallenmedia]

Thank you so much for this, life saver

[@greghughes3965]

Thank You Robert - this got me going! Just enough info, good pace, understandable.

[@dashmanqq]

Thanks Robert, The video was very helpful very intuitive thanks for sharing.

[@sfotkai]

What is the protect cover on the video cover? No word of that in thew video, though protection is very needed!

they sell them on adorama

[@Sukhpreet3236]

That was really great. No bullshit and straight to the point talk

[@jasminebains84]

Very informative walk through! Thank you!

[@josephbarberphotography]

lotta cool functions i never knew about. Thanks!

[@Visualist-cph]

HI, thanks for the video, but my ad pro got offline after I shouted with it. I couldn't find why this happen :(

[@frankdecock2735]

Hi Robert, thanks for these instructional videoes that are always inspirational. Among other ones they led me to buying the Godox AD200 Pro recently, even if I already had 2 Godox V860iii speedlights. Now, what you do not cover in this video, and what I fear is an undocumented feature, I discovered this by accident. And it has to do with the color stability or color temperature mode (C). Even with that turned off in F8, try this... Put the unit in M mode and long press the Set button. The display changes and shows 2 numbers on top of each other and the (C) symbol turns on. My unit shows "330"on top and "0000" below that. Turning the dial increases/decreases the below number which actually seems to range 0010-5600. So to me that sounds °K... The mode button and the Gr/Ch button increase respectively decrease the top number which ranges from "100" to "330". Which doesn't ring a bell at all. In order not to mess anything up I simply reset the unit to factory settings. Also, turning the unit off and on again makes these numbers disappear. However, the unit still has C.Fn 8 turned on ! Do you have any idea what these settings are all about ? So far I cannot find any relevant info. Anyway, keep this magnificent channel up and running ! Regards, Frank

[@robhallphoto]

Hey Frank, definitely never heard of this - although not surprised as I just learned about a secret, undocumented feature on another Godox product. All my AD200's are in the studio, so I'll check it out next time I'm in there.

[@threeD1965]

Thanks

[@geoffreymccarthy8183]

Great video. Thanks for the info.

[@pearllocket]

Thanks so much man - really appreciate the time you put in so I can better understand this bit of kit! :)

[@lkfxfotografiavideo177]

Amazing, straight to the point 🙌🙌😎

[@Singh_shots]

Thanks When I trigger the flash using X2T trigger the Flash works but the light stays on, Any setting to turn this continuous light off (post triggering flash)

[@barkyvonschnauzer2188]

Thanks! Im getting Adorama doorbuster deal 2for $509 kit

[@aaronmoore1238]

Is there a way to make it so that power level is not reset to full power after taking a photo?

[@bettinademiguel6155]

thank you so much.

[@jeepofmike1]

Thank you Robert, great help on the ad200

[@Pixie_Illusions]

Great no nonsense channel. Keep it up.

[@wilkbor]

Excellent. This was very helpful. A general question for Robert, or anyone else who might know: When using this flash in combination with gels, is the temperature set by the gel and held at that level, or can it vary in the same way a bare bulb might vary. Thanks again for the video and any feedback....

[@viveksathish]

Great video. To the point, no nonsense.

[@nirresharulgnanam2615]

Good video bro.Can u help to make a video on how to activate hypersync mode and show us which trigger to use and how to set the trigger for hypersync mode.I am having problem to understand how to use it.Thx

[@nandurx]

You are the man!!

[@MasoodShneezai]

Straight to the point. Subscribed ❤

[@sylviastagg-giuliano6229]

Thank you again for a very informative video!

[@veryimportantpooches2619]

This was great and really helpful for me to understand the functions but I am still no closer to understanding how to connect the ad200 pro to my Canon m50. Any ideas? The instruction manual has me totally lost...

[@robhallphoto]

Unless you were using some type of physical sync cable, you don't connect the AD200 to your camera. The AD200 is controlled and fired by a transmitter, which connects to your camera via the hotshoe.

[@veryimportantpooches2619]

@@robhallphoto got it! Thanks so much. I discovered this after posting the above. It all makes sense now. I usually do my research thoroughly with this kind of thing, but I think I was a little too eager on this occasion.

[@jody1622]

Really clear! (But how do I get the barn doors off?)

[@harleensandhu1149]

Hiya, what does it mean when on Amazon it says “built in” or “slave” for a ad200 pro?

[@sirachuchchienthaworn389]

Thank you! This is very helpful.

[@carlosandreviana9448]

My flash is sometimes blinking the stand by button continuously and beeping. There is no troubleshooting in the manual. It stops when I press the button but can start again after a while. Do you know what this is?

[@salaugruso7863]

Robert you mentioned you can set stroboscopic mode from the trigger. How do you do that.

[@user-qz3ig8be6d]

Fantastic.

[@ChevroletEpica]

Thanks alot

[@fernandagunsanchannel]

so upgrading from AD200 to the pro one is not that necessary right? even u dont use the color stability mode. I mean to correct color is achievable by using RAW format right?

[@robhallphoto]

I stated my piece on that in my review of the ad200 pro. Color stability isn't really about whether or not you can fix it in raw. It's about having more consistency between shots to reduce adjustments image to image, resulting in faster processing time for large volumes of images, such as people who shoot products or e-commerce clothing. It's about having lower variance between multiple lights, something you can't fix globally in raw and would require time-crushing masking to adjust. There's no single answer to whether it's worth it or not, as the impact of the improvements will be felt differently depending on the photographer.

[@hr5641]

This was amazing. Thank you!!!!!!!

[@Filtersloth]

Great video. Can the flash go wide or narrower when using the fresnel head?

[@robhallphoto]

No. It's fixed at 35mm.

[@MikeT-yy3]

Hi Robert, another superb video. Any idea what the 2 lines of numbers are when you long press the Set button, mine display Cannel A 0300 and 0020 . Can't find any reference in the manuals, the only entry on the internet is guessing at a reduced power level, does not seem likely

[@gogobingbong]

thank you!!!

[@spirit_zack]

What’s the name of the round head I have the ad200 pro godox and none of the round heads fit

Is it possible to change the zoom of this flash or is it already fixed?

[@wesleyhicks209]

Perfect !

[@cadmus777]

Does the modelling lamp, let's say at full power on the bulb, have a noticable effect on the battery life?

[@howelloh]

I really enjoyed most of this video, it gave lots of info in a short period of time and it was well executed. However, when you were explaining menu item F8 (color stable mode) I couldn't tell if you were saying the color is better with it on or off. At one point you said "with stable color mode on will decrease the range of colors that this flash produces." Then you went on to say "so the light is a lot more accurate with stable color mode on." Can you please explain? Thank you

[@robhallphoto]

In photography you tend to want consistency between images. Therefore, less “range of colors” = better / more accurate.

[@anonh7]

Thanks for the video. Very useful.

[@RonaldMoorephotoopstudio]

Thank you! The manual doesn't even explain where the power button is located for starters.

[@thats_mr_b_]

Why would I want the round head? Why are there 2 options outside the bulb ?

[@robhallphoto]

watch my video on the round head.

[@onlyfacts4me]

Whenever I have the AD200 set to color stable mode ON, it does something funny... If I increase the power past around 1/64, then come back to a lower power, it will fire the first shot at the previous high-power, then fire the second shot on the new lower power from then on. Is this normal??

[@BrianMackey2010]

Best overview yet! :) thank you

[@cesarespinosa6151]

How do I see the firmware version on this flash? I cannot find it in the menu

[@bharatveeranki5091]

Hi Robert, thanks very much for the helpful guide. I recently got an AD200Pro. On my flash I can see the test button on the back keeps flashing in red quite often. What does this mean? Also if I turn on the beep, it keeps beeping for as long as the led is flashing. I went through the manual, but didn't find anything.

[@tonypags5315]

Thanks for the review my friend!! I know in the past you had a link/review for a rubber protection coating for the ad200 Pro??

[@vansullivan236]

Great job, thanks!

[@JoseLopez-pw1im]

Very well explained! ...and... Do you have a tutorial on the transmitters available for the AD200? Thank you!

[@robhallphoto]

Yup, x1, XPro and R2 Pro II. Just search my channel for them

[@cooleypriestly7392]

Does the round head still brighten with the old ad 200 and brighter than the furnel

[@robhallphoto]

Does it function as a flash with the AD200? Yes. Is it brighter than the fresnel? No. The fresnel focuses light into a more narrow beam and that smaller area would be brighter than the round head’s larger/more even area.

[@LakshayGrover]

Great tutorial. What is the difference between the rectangular sealed flash that came on the strobe vs switching out the head and put halogen glass like bulb that came with it?

[@robhallphoto]

The Fresnel head (rectangle) has a 35mm beam angle and creates a more concentrated beam of light that is harsher. But compatible with speedlight modifiers like Magmod attachments. The barebulb (halogen-glass like) fires light in all directions, which is better for spreading light as most studio modifiers are designed for, like softboxes, beauty dishes, reflectors, etc.

[@LakshayGrover]

Thank you for your prompt reply. Was about to make a mistake tomorrow then. Glad I asked. I’ve Liked your Facebook page too as you produce quality videos.

[@JifferRiffic]

How do I hold the AD200 across the other side of the room and have it trigger my cameras shutter to take the photo?

[@ladylauramal]

I'd love to know more about the pros and cons of the stable color mode...

[@robhallphoto]

Pros : kelvin temp is more consistent between various power levels Cons : flash durations get longer That's all that changes.

[@goratnik337]

@@robhallphoto If flash durations get longer, does this affect power in HSS?

[@robhallphoto]

@@goratnik337 There are no flash durations when in HSS, so this can't affect power in HSS.

[@amithazra1612]

A guide for AD400 PRO plz...

[@iransirijillo]

Amit Hazra waiting roo, I only own the ad200pro and ad400pro, I wish I knew the ad300 was coming cause I would’ve gone with that one instead of the 400

[@cadmus777]

@@iransirijillo Just curious, is that because you're unhappy with the 400, or do you think the 300 suits your needs better? The 400 looked to me like the sweet spot, but interested to hear otherwise!

[@DashVisionLLC]

Can this be used as a product photography light? Any suggestions on accessories if so?