If you're interested in any of the tools or equipment I use and you want to help support the channel then don't forget to check out some of the affiliate links in the video description. Thank you for the support!
@HolosunGodOdin6 ай бұрын
Man the foresight to cast those tig rods was incredible. Kudos! Looks great!
@Watchyn_Yarwood6 ай бұрын
Would have never thought of that!
@williammaxwell19196 ай бұрын
@Watchyn_Yarwood you and me both
@Hellsong896 ай бұрын
Nah just experience in both welding with tig and foundry work. One solves a issue of another.
@jsnthurst13 ай бұрын
And he even needs them in his next video!
@natedawg34836 ай бұрын
Because of your I've bought a 3d printer and built a furnace. Thank you, brother.
@TamahaganeSteel6 ай бұрын
Because of *you
@robinson-foundry6 ай бұрын
That’s awesome! I’m glad to hear it!
@Hoolahups6 ай бұрын
@@TamahaganeSteel bro stfu mans just had a typo
@znefas6 ай бұрын
@@TamahaganeSteelthey probably meant to say "because of your videos"
@Mdg876 ай бұрын
I think he meant to say, "Because of your sick vidz brah, I bought a 4d printer."
@tinman75516 ай бұрын
The trap for sparks on the grinder is genius, looks so much better than a bucket of nasty water on the floor 🤮. Love the videos 🥰❤️
@lazarusrex95456 ай бұрын
Yeah, id' love to see a video on ow that was made.
@ValTek_Armory6 ай бұрын
looks like simple stovepipe material with a jar added to the end. @@lazarusrex9545
@greerbriggs84216 ай бұрын
gotta catch the sparks to reuse them later, otherwise it's just a waste
@eccomi216 ай бұрын
@@greerbriggs8421The spark jar
@patriciusvunkempen1026 ай бұрын
why you so mean to me bucket :c
@anzaca16 ай бұрын
0:28 3D Printing is a revolution for making casting molds, easily. An accurate, reliable form with little effort.
@becauseican26076 ай бұрын
The spark collector is genius! This way you always have some spare sparks at hand👍
@FinkleStickMcgee2 ай бұрын
i just gave u the 69th like, i am honored, i am high also
@benediktpaul1576 ай бұрын
Hi, blacksmith here: I really like the concept! Unfortunately that hardening you did was WAY too cold. The entire piece has to be glowing at least dark red, you can check with a magnet: as long as it is magnetic it is still too cold. Also there is a high chance that the casting got the steel too warm again to retain any hardness that would have been there
@fishman25866 ай бұрын
I do agree about the quinch temp and you could be right about removing the heat treat with the bronze but I figure with the amount of steel there and the bronze only touching the back it should only temper the back abit and not the whole piece of steel but could be wrong, its possible that using an induction heater to only heat the edge of the steel and harding it after its been casted could work better but youd need an induction heater to get that controled of heat placement
@anvilsbane6 ай бұрын
Also a smith, I had the same concerns. It is super cool to look at, but my hangup is our predecessors didn’t make axes this way for a reason. Not saying it CAN’T be done, but alot of work to make it correctly.🙂
@billynomates9206 ай бұрын
oh. that axe looks nice. click. what an interesting video. i wonder if other commenters agree? "hi, blacksmith here, dark red, anealing, glass transition temp, something something" down the rabbit hole i go! 😄
@neil3566 ай бұрын
Only aesthetic improvement for me would be a bronze wedge.
@suprememasteroftheuniverse6 ай бұрын
You forgot the most important part that seems goes over all the forging channel's heads: galvanic corrosion. That axe will just crumble to dust but what do I know? Nothing about lame channels and their quest for the daily trend.
@The_Envix6 ай бұрын
Sand in a crate process never gets old
@TheZombieSaints6 ай бұрын
Making the little tig filler sticks out of the same alloy wad a genius idea mate! Well done indeed! 👍
@haydenc27426 ай бұрын
I think the steel really sets it apart...MUCH stronger and can be sharpened much easier than the bronze! Plus the two tone of the axe is incredibly beautiful! Love the shape of the handle and the overall look...DEFINITELY a beautiful piece! Keep em coming!!!!
@TheMaskedArcanum6 ай бұрын
I also wonder if this axe would be surprisingly usable since it's not uncommon to use soft steel for the body and hard steel for the blade to get the best of both worlds. I suppose the only issue would be a crack between the two, but that extra loop seems to be more than enough to stop that
@MediocreNed6 ай бұрын
@@TheMaskedArcanum I'm more worried about galvanic corrosion, aluminum and steel do not like to be touching each other. Maybe the copper will prevent said corrosion but I don't know enough about metallurgy to be sure.
@TheMaskedArcanum6 ай бұрын
@@MediocreNed Looking it up, the steel he used is a low-alloy steel, and likely has an anodic index of -0.85, and apparently aluminum bronze with his proportions might have one around -0.35. That's a 0.5 volt difference, which from what I can gather means it needs temp and humidity control to be fine long term. Aluminum bronze itself is fairly great at being corrosion resistant, but it'd be much lower maintenance if he flipped his ratios since aluminum casting alloys have a -0.95. Then it'd be fit for harsh environments.
@MediocreNed6 ай бұрын
@@TheMaskedArcanum So it won't corrode at the dovetail joint like I was worried about but it will be more vulnerable to patina/rust overall? If so, as long the axe is oiled it should be fine, tedious but doable.
@aikonlatigid6 ай бұрын
There is no such thing metal like aluminium in the bronze age, it was tin & lead back then
@Darkwolfe736 ай бұрын
So nice to see someone who still uses old school machinist tools and measuring instruments. My dad was a machinist, my grandfather a carpenter. This video was like watching both craftsmen at once.
@dallenpowell27456 ай бұрын
That's awesome! We're opposites. My grandfather is a machinist and my dad is a carpenter. It's cool that we both ended up here to watch this beautiful creation come together.
@Sharpbevel6 ай бұрын
A bronze wedge would have looked cool but I love this project. Great job.
@Enterprising_Aim6 ай бұрын
Bronze wedge, and a bronze endcap for the handle would be nice touches.
@itoibo42086 ай бұрын
it looks like it needed a groove along the edge of the steel to support it from side to side. Although he did put in that little hoop of steel, this looks like it will 100% move sideways if used as an axe a few times. very good looking art piece, though.
@MisterBones29106 ай бұрын
@@itoibo4208 The pressure from the differential expansion and contraction of the metals might make it a more secure joint than you'd expect. For example look at the Canadian 2 dollar coin, after some early problems with the center falling out because of just how cold it gets up here were fixed they're generally very durable. Only way to tell would be to make a less-nice one and give it a good torture test.
@itoibo42086 ай бұрын
@@MisterBones2910 maybe. One common action of an axe is to pull the handle sideways to split things. I feel like this would start coming loose after doing that several times. There are also side forces from just hitting things slightly off. I realize this is an art piece, and it is beautiful, but I would be afraid to actually use it, because it might be ruined fairly quickly. As you said, a test would be nice.
@MisterBones29106 ай бұрын
@@itoibo4208 I'm a welder so I've got a good amount of experience with thermal expansion in metal, while I can obviously guarantee nothing I'd personally feel quite safe using it. Keep in mind that it's the same sort of pressure joint (not the dovetail, just the expansion part) that holds the head of the axe on the haft, at least when it's cut down flush with the head. The only worry I might have is if the bronze began to deform, but it's got quite a bit of meat to it and I'd imagine you'd notice it happening before it came off and took a bite out of your shin.
@duanelee62086 ай бұрын
Absolutely beautiful. I really enjoy seeing young men create not only beautiful, but useful tools.
@sexypeople80366 ай бұрын
I just want to say, that I appreciate the effort to pre-harden the axe, but there is a 0% chance that it stayed hardened after casting. Especially not when you preheated it as well. But other than that, Beautiful work. I would suggest that you edge quench it with a torch after you cast it. If you’re careful you wont melt any brass. Great work!
@FelipeBittencourt9996 ай бұрын
It looks beautiful! It's great to see how organized you are with your tools and the attention to detail that you put in each project. Hope to see more!
@angrysheepdog97446 ай бұрын
The merging of colors and materials plus mechanical interlock is work of art.
@Yaivenov6 ай бұрын
Beautiful. It has me imagining a version with fleur-de-lis in place of the dovetails.
@AnthonyIlstonJones6 ай бұрын
A most vicious and beautiful idea, I like it.
@zaphodbeeblebrox457412 күн бұрын
That axe is a thing of beauty. Excellent job.
@hugodesrosiers-plaisance31566 ай бұрын
Beautiful work, lovely axe head! The dovetail is a great idea. As a woodworker, 2 things I'd have done differently about the handle: 1- use a sturdier wood than walnut, like ash, white maple or hickory, walnut is a bit fragilw if you mean to actually use the axe 2- finish the surface with a card scraper instead of sandpaper, it gives more of a sheen after oiling, whereas sanding has a more "dull/mate" look, which might make sense if meant as a showpiece. 🙂
@zenhydra6 ай бұрын
On a handle as short as that I don't think walnut will be an issue, and I don't imagine it's going to see a lot of hard use. On anything longer, or on a tool that's going to be a workhorse, I agree with you.
@Yaboyycrunch6 ай бұрын
@@zenhydra yeah i agree, and a lot of things people forget it grain orientation. and if its just a showpiece then this little hatchet is fine but I worry about the eye deforming
@drmusrudloff6 ай бұрын
@@Yaboyycrunch that head will be loose within the first 3 uses, the eye wasnt seated properly, it hits the bottom of the handle before even getting snug in the eye, you can see he just push it on by hand
@Yaboyycrunch6 ай бұрын
@@drmusrudloff yup
@1xm_mx1Ай бұрын
Another beautiful handcrafted tool with the help of 3d printing and modern technology. Well done!
@villiersman9516 ай бұрын
an absolute work of art true craftsmanship at its finest
@madhukeshnp6 ай бұрын
Those pin holes in the cast to make pins/slug to fill in the voids was very thoughtful… loved the idea. Very good.
@SethKotta6 ай бұрын
New frames need analyzing; click Analyze.
@mattke5etc6 ай бұрын
@6:38
@boiboi5056 ай бұрын
New frames need analyzing; click Analyze.
@SethKotta6 ай бұрын
@@boiboi505 New frames need analyzing; click Analyze.
@Shalami24 күн бұрын
what does this mean..? i saw it and came to the comments for an explanation :')
@marshallb99246 ай бұрын
Just to second what Natedawg said, thanks to your videos, i found out how approachable something like sand casting is. It's one of my favorite hobbies now. I made half the Christmas presents i gave away last year, and I'm making my own tools for the garden now. Thanks, man.
@theoldcyberguy32996 ай бұрын
I wouldn’t change a thing. You are an artisan of the highest level. I LOVE this axe and I’m envious of your supreme skill.
@wampuscat7433Ай бұрын
Nice job! Very impressive workmanship, design and final execution. You have a right to be proud.
@whocares66986 ай бұрын
If anyone asks us, it was perfect the first time, no problems LOL. Turned out great.
@postopken27896 ай бұрын
This is definitely my favorite of all your projects on this channel! This isn't too different in concept from the way a lot of axes were made historically, with a mostly iron head and a steel edge forge welded together. Putting the steel in the mold and casting around it is such a cool idea too! The dovetail turned out amazing, and I love how the steel and bronze look together.
@eyeofbass6 ай бұрын
Next-level craftsmanship. Meticulous attention to detail. Nicely done.
@tobiasfranz51556 ай бұрын
Fantastic as always. I love the content you create. It's especially enjoyable to see the troubleshooting you go through to make these amazing metalworks. Thanks for sharing your videos!
@roblesmetalart6 ай бұрын
Awesome work. I love how you combined 3-D printing, steel shaping, sand casting Bronze, and woodworking into one project. And it looks sooo good. Well done my friend!👏👏👏
@conservative-ku3lz6 ай бұрын
What a creative mind, and very practical at that. Awesome job. What a beauty.
@LegendaryLootForTheSoulАй бұрын
That looks awesome. It's very dwarven looking. Well done.
@rhianGT6 ай бұрын
Love the steel tip idea and the dovetails. Beautiful piece.
@charlesdebarber29976 ай бұрын
I adore your videos when they drop. Only a few a year, but always top quality. I'm proud of you for how your skills have improved over time too.
@TwigPB6 ай бұрын
Good work! You should try making a dovetail pickaxe as well but have say the left side be steel and the right side be aluminum bronze. Would be cool to see the dovetail "armory" grow
@SwingyladАй бұрын
I remember watching your hammer making videos and loved them I'm so glad i rediscovered this channel.
@TrevorDennis1006 ай бұрын
Seeing you hold the hammer by the middle of its handle @7:45 reminds me of when I was doing my toolmaking apprenticeship at the Ford UK Apprentice Training School at Harrold Hill in Essex. We rarely saw the boss of us all, but he had a workshop at the end of one of the workshops, so one day when walking through the workshop he say an apprentice using a hammer as you were. So he took the hammer and cut off the rest of the handle telling the apprentice that you _always_ hold a hammer by the end of its handle. I am 74 now, and long since retired, and I am not sure I agree with him as I am sure there have been times when I used a hammer that way. On the other hand, I have just counted, and I have fifteen, all different, hammers in my toolbox, so I'd argue that if I found myself wanting to use a hammer holding the middle of its handle, then I was probably using the wrong hammer.
@constantinbarbu.6 ай бұрын
i find that swinging a hammer just to hit something hard, its best to use the end of the handle, but for a more delicate or finer approach the middle or any other part is preferable for balance and control, and thats what i do mainly because i dont have many hammers of diffrent dimensions
@Watchyn_Yarwood6 ай бұрын
Just out of high school, I worked on a crew building corrals, cattle pens and fences from wood and wire all over Texas and Oklahoma. Try hammering a nail or staple into oak wood and you'll soon learn the only way that's gonna happen is if you hold the hammer on the end.
@vaelophisnyx98736 ай бұрын
middle for control, end for maximum leverage
@phasepanther442321 күн бұрын
@@vaelophisnyx9873 Or as the original comment suggested, use the right hammer. Shorter and lighter hammers for control. A full length heavy sledge for destruction. Something in between for various levels.
@phasepanther442321 күн бұрын
@@Watchyn_Yarwood End or not, the length is what matters. A short hammer isn't gonna be stronger than a longer hammer of equal head weight because you hold the end. Halfway on a 40cm handle is better than end of a 15cm handle.
@erikm97684 ай бұрын
Man i wont be able to cast metal in an apartment but i'm living that life through your videos
@paulfryman63716 ай бұрын
dude this video I was kinda suspicious of the thumb nail and then I watched it it was the actual thing you made awesome work keep it up I'm am dropping a sub because of this one
@Krazykal5 ай бұрын
I really like that belt grinder setup, never seen one with a catch tube like that before.
@bruderk42576 ай бұрын
I've not yet seen something like this. This axe is an absolute beauty without loosing any functionality. I love it.
@Dellpodder6 ай бұрын
Great project! It's cool seeing how you've expand both your craftsmanship skills and your workshop over the years.
@archangel64976 ай бұрын
Absolutly amazing 100 times better than that just random damascus stuff. 10/10 great job!
@Twitchsucks25 ай бұрын
The dovetail look is so satisfying when it's a perfect fit
@longrider425 ай бұрын
I said it once, and I will say it again, you are an Artist, your work is extremely well done. Keep using that brain to think up new and different things to do. Oh, and you have a GREAT work shop.
@samschad4 ай бұрын
awesome techniques. I love casting bronze against anything silver- the seams are magical. Great idea for letting the bronze cast over the seam as well as the extra loop welded onto the steel. Just awesome
@az803116 ай бұрын
I love hatchets and axes. Your work is so complex but easy to understand and appreciate. I watched two of your videos in a row and enjoyed the watch. You have a way with metal and wood. Keep up the good work and thank you for the entertainment and education.
@chuckdog7901Ай бұрын
You did a really good job. I'm going to start my axe project this weekend. Thanks for the great idea. I'm looking forward to watching more of your videos.
@matthewmarting36236 ай бұрын
This man knows a thing or two! As soon as I saw your spark collector I started taking notes but I would never have thought to include tig wire in the original mold. It would occur to me that I might want to cast some with leftovers but putting those holes in there is genius.
@pksublime6 ай бұрын
Absolutely gorgeous
@McPatMan1246 ай бұрын
Very smart making fill rods like that.
@kaunas8886 ай бұрын
Beautiful!
@doubleq12236 ай бұрын
What an awesome build this was
@TheMadMonk96 ай бұрын
It's a BEAUTIFUL effort. Thank you.
@LiquidAudio6 ай бұрын
Mate that is phenomenal work, absolutely beautiful!
@homemadetools8 күн бұрын
Nice hatchet! We shared this video on our homemade tool forum last week 😎
@opa_plays_mw53185 ай бұрын
Well thought out, and well executed. Love that Grizzly!
@garycornelisse92286 ай бұрын
That turned out very well. I do watch a lot of videos about projects much like this, and I constantly find myself asking the same question, "don't any of these guy own a milling machine or a router table". Yes, it turned out well with the hand tools, BUT.
@wessonw2-td7kh3 ай бұрын
Such a positive and refreshing approach toward having an axe to grind... Next level craftsmanship, entertaining and educational. Subscribed
@maxb32486 ай бұрын
That is beautiful. A very common way of making an axe is to use a lower carbon steel or iron for the main bofy and a higher carbon steel for the edge, but to use two completely different metals? Never have I even heard of something like that before. Amazing work good sir.
@blacklight4816 ай бұрын
this is a really nice bimetallic hatchet. the steel blade does the job of cutting while the softer bronze body absorbs the shock.
@Sharper_Than_Most6 ай бұрын
The collector you made for the belt grinder is super cool!
@rosellabill6 ай бұрын
I smiled at that. When you used the same colour hammer to put the wedge in. Great job
@markservatius2903 ай бұрын
Amazing work. Hard to imagine how much time and energy you put into this. Thanks for posting.
@sethwiles12556 ай бұрын
Clever idea! Excellent execution! And I definitely learned a few things
@kenneth25125 ай бұрын
That's a freaking work of art!
@chrisnorton34946 ай бұрын
Reminds me of a dwemer axe. I need this. ❤ it's a work of art
@richardgatchell25236 ай бұрын
Absolutely fantastic
@bodinian3 ай бұрын
I love seeing stuff like this.
@rayreus71386 ай бұрын
the ocd inside my head tells me its wants to see the axe polished to a mirror finish. and always love this kind of crafting video.thank you verry much for the entertainment
@Richard-ug4el3 ай бұрын
That is an awesome looking hatchet. Really great job.
@jameselkins70226 ай бұрын
Absolutely beautiful workmanship. I am an old long time design & production engineer and I am impressed.
@andyfleege8504Ай бұрын
In dwarven accent "fine craftsmenship!" Good works sir! I wish you would have added a logo in the casting! Awesome. Thanks
@Gogsnik6 ай бұрын
I love the catch bowl on the grinder, I don't know why they don't all come with one of those fitted, so much more efficient and tidy! :D
@mickeylickey1233 ай бұрын
Excellent video. Your shop is super clean and organized. I like it
@Arceus32516 ай бұрын
The tick welding idea with the same alloy was brilliant! Worked well. Finished product looked gorgeous too :)
@MRRizwan80746 ай бұрын
Simply awesome! Mad respect!
@isosev6 ай бұрын
Superb work on that handle. Clearly took a ton of time and a lot of patience.
@JoeDebono3 ай бұрын
Well done young man, not only is the design, process and forging top class, the no-nonsense commentary, videography and editing is excellent. Taking the time and making the effort, as you say, pays off in all aspects of life.
@jodyanthony2 ай бұрын
Looks gorgeous
@homedad33246 ай бұрын
That is a beautiful Hatchet!
@gafrers6 ай бұрын
Fantastic, interesting, great final results.
@travisbowman15296 ай бұрын
man I really really really like that hatchet you made. Very inspiring for someone like me who has know previous knowledge or expierence in doing that type of work. Glad that it turned out well for you.
@mrlondon9636 ай бұрын
A work of art. Beautiful.
@MANIC34206 ай бұрын
I am in love! Need this
@filmmaka776 ай бұрын
Love the project turned out gorgeous! My only suggestion would be some sort of acid treatment on the head. It would make that border between metals pop like crazy
@Webby1236 ай бұрын
Awesome idea on this build, and I think it came out beautiful. After you welded that loop on the edge, steel, I thought next time you could also drill some holes on the inside of the dovetail pattern to lock in the Bronze. I like the added loop for sturdiness, and also a little handle to lift it out of your kiln. Great job, you’re very talented
@asdfASdf-qv8jx6 ай бұрын
incredible work of art and impressive skills in metal and woodworking.
@azimuth48506 ай бұрын
Very cool. I like how you used it at the end.
@donaldlococo9544 ай бұрын
What a beautiful axe you made. Walnut is my favourite wood to work. The colors are perfect.
@jasonvandervalk36796 ай бұрын
This is true passion we need more of this in todays world
@jlunde356 ай бұрын
Wow, more art that function. Beautiful and magnificent.
@martinbisschoff9886 ай бұрын
Beautiful work. Respect.
@chucklangshaw64856 ай бұрын
Wow, that thing looks fantastic
@andykielisch1056 ай бұрын
That was amazing to watch. Great work.
@joesmith15746 ай бұрын
That is pretty slick! I like the difference between the metals, really stands out. Walnut handle is cool, too!
@Boslandschap16 ай бұрын
It looks amazing, a job really well done, also really smart how you organised your project I'd say you can really be proud of this project!
@jamespierce77236 ай бұрын
Beautiful work great craftmanship .something this nice needs your makers mark.thanks for the video
@cptairwolf6 ай бұрын
Some engraving on the handle and etchings on the blade and you've got yourself a museum piece!