Roborock Error 1 - Laser Distance Sensor (LDS) Malfunction DIY Repair

[@koruki]

Thank you for this fix. I cleaned the tension belt with some isopropyl while I was at it. Was quite dirty. If it happens often I plan to solder a tiny terminals to the motor about it through to the dust bin area. That way I can do this “restart” trick without opening all the screws over and over again.

[@KSToh]

koruki cool that’s a nice trick. Let me know of it works. Please subscribe to my channel!

[@crazytwoknobs]

Just added wires to the outside so I can jump start whenever necessary. Thank you for this idea.

[@mudden88]

Thank you for this great video. I used an USB cable to jump start the motor and it worked. Took about 5 minutes. Awesome!

[@KSToh]

Cool. But if it happens again, you need to change the motor. Only USD$10. Please like and subscribe!

[@cherishlane]

This was a very useful video, simple and well explained, fixed by roborock and saved us hours of manual vacuuming 🙂

[@KSToh]

Great to hear! Kindly subscribe to my channel!

[@redyau_]

No way. This method actually worked for me as well. Thank you so much! By the way, no need for a cable for jump starting. The 9V battery is almost the good size to begin with, and you can just bridge the gap with a screwdriver or whatever - simply touch the motor terminals directly.

[@KSToh]

You're welcome! If it happens again, change the motor. Cost less than US$10. Watch my other video. Please like video and subscribe. 🙏🏼

[@guillaumecorriveau6593]

Excellent video, I was able to fix my robot while my children were watching TV. Extremely useful, and I love how the video is broken down in chapters. Great job!

[@KSToh]

Glad to hear that. Please subscribe!

[@heyshanunez2080]

I have been using this video for the last 4 years. I have been ordering the new laser sensor at Amazon for $10 and work for 15 months and then needs to be replaced again. Thanks

[@KSToh]

Cool! Please like and subscribe.

[@sunnyzhao2000]

You saved my life! Exact same model and same error message, follow the same process and it worked! Thanks for sharing!

[@KSToh]

Glad it helped, please subscribe to my channel!

[@KongHans]

Same here, except I changed the engine instead as it didn't work at all with an external power supply. Easy disassembly after seeing it done, and how not to break anything.

[@yasminjallouli1224]

Same for me.. it was a relief when it worked 👌🏼😌

[@alimirryt]

Thanks mate. Got it working with your help. I skipped the 9v part and went straight to connecting the wires to a usb power. Worked like a charm

[@CookWithKrasi]

lol, the same with me. Jump start and ta daa. It works. Thanks a lot man

[@rcosher]

Worked like a charm thank you 🙏

[@KSToh]

You're welcome! Please like and subscribe.

[@OlegMakaruk]

Thank you! Saved my family from drowning in dust)

[@KSToh]

Good. Please subscribe. If it happens again, you need to change the motor. See my other video.

[@michaeljin9939]

This just happened and I found this video. TBH was initially sceptical about it working but connected the motor via USB and lo and behold. It’s alive! Thank you so much for uploading this.

[@KSToh]

Good for you. If it fails again, change the motor. Please like video and subscribe.

[@fannigurt]

Thank you for help, restarting of the engine with battery helped me to avoid sending device to the service. 🙌

[@KSToh]

Good for you! Kindly subscribe to my channel. 🙏

[@michaelkennedy4801]

I sent this back to the manufacturer once before for the same problem and it took weeks to get it fixed through them including weeks of emails back and forth just to get the machine shipped....frustrating. THIS WORKED!!! It’s been running for the last half hour no problems... You are amazing and the video was not dreadful! Well done. Thanks a ton.

[@KSToh]

Michael Kennedy you are welcome.

[@KSToh]

Michael Kennedy please subscribe to my channel.

[@michaelpufahl2211]

Outstanding....this Tutorial saved me a lot of money! No need to send my S55 to Service! It's ALIVE....motor was stuck and needes a jump start just like in your Video! Greetings from Germany

[@KSToh]

Good for you! But if it happens again, you may need to change the motor. Less than Usd$10. Watch my other video. Please subscribe!

[@nrw1981]

Thank you so much for this video. Tip for the S5 max owners. When removing the cover, there is the little port for your usb sitting on top. No need to unscrew. But the recharging worked like a charm.

[@KSToh]

Oh. You mean there is USB port on the robot? Cool. Please subscribe.

[@fj7720]

Thank you so much! My Roborock was working for 1,5 years, before i got this error, out of nowhere. This fix is easy and was successful for me.

[@KSToh]

Cool. Please subscribe. If it happens again. You need to change motor. Less than US$10.

[@KSToh]

kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@Darkony]

This was very helpful. Thank you. You are helping a lot of people with this video. Question: how did you connect the cables to the motor to power it? Did you solder them? Did you use any specific cables (from where you got them)?

[@KSToh]

I did not solder the wires. I just tied them to the motor cables. No special wires. Just some wire I found.

[@KSToh]

Please subscribe to my channel!

[@tvg9778]

Tried to start my S5 today, did not start up with same error. Googled your vid, took me about half an hour to do it myself. Worked perfectly, thank you!

[@KSToh]

Cool. If it happens again, you may need to change the motor. kzbin.info/www/bejne/qIexmWNpm9WcqJY. Kindly subscribe of you like my channel!

[@davereid6247]

Thank you so much! Was able to restore my s5 doing this exact thing. Appreciate the easy and quick video. Exact same issue and exact same fix! Thank you so, so much!

[@KSToh]

Nice. Please subscribe.

[@CrazyRandomSht]

Although this video could’ve been edited and shortened, it helped me fix my roborock. I’m grateful! Thanks!

[@KSToh]

Apologies for the length. Please like the video.

[@ishai671]

Thank you. It really worked again for 5 minutes but then stopped working again (again fault number 1) What do you think needs to be done?

[@KSToh]

If the problem comes back, it means you need to change the motor. I have a video that shows where to buy the motor and how to change it. ישי טייב

[@matthewtaylor8727]

@@KSToh where’s the video I couldn’t find it?

[@KSToh]

@@matthewtaylor8727 kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@unitedamigo626]

Followed this video and now my robot is working perfectly! Thank you so much!

[@KSToh]

Cool. Please subscribe.

[@adrianduczkowski3012]

Danke! Du hast mir leben gerettet! Freundliche Grüße aus Deutschland!

[@KSToh]

Schön für dich! Bitte abonnieren Sie meinen Kanal. 🙏

[@kalmhessr]

I did this a year ago. It worked for about a year. It stopped working today. I did it again and it started working again. Thank you!

[@KSToh]

Nice please subscribe. You may need to change the motor.

[@Kelly-qy2mb]

Omg finally i found this vid, thank you bro

[@KSToh]

Great. If it happens again, you need to change motor. See my other video. Please subscribe!

[@Mrgburla]

I did the steps from your video and it worked! - my robot is now back in business. Thank you for the tip!

[@KSToh]

Cool! Please subscribe. If it happens again, you need to change the motor. Less than US$10. Watch my other video.

[@tompiccirilli1511]

The problem is most likely the connector for the motor vs issues with the motor as suggested here. That is why the problem returns for some, and others claim by running the motor with a power supply fixes the problem when in fact, simply re-seating the connector fixes it, at least temporarily. I would first try (carefully) cleaning the contacts of the connector attached to the main body using a thin eraser or alcohol and ear swab first. I spent my career fixing portable surgical electronics and much of the time, simply re-seating things that does the trick. Do the easy stuff first before blaming the motor.

[@ericviston]

yeah, I think so. It may be the issue with the connector. The motor rarely has problems

[@KSToh]

I am not expert on this, but I think the problem is with the motor itself. Often, the problem comes back and a change of motor is needed. I had to change motor for one of the sets when the problem recurred. So far so good. Kindly subscribe to my channel!

[@ericviston]

@@KSToh indeed, it was the problem with the motor. I added lubricant to the motor and it works as new.

[@ekaterinadiadenko5318]

So far so good with this vacuum. kzbin.infoUgkx8ISPQRRAfpAaX4msGjyodObTBnlj4T5g I was a little concerned to find it seems to be all plastic, but the reviews were good, so I'm hoping for the best. Very easy to assemble Recommened, and only attachments I've used so far work well, and are easy to use. Doing a good job on the new carpet in my bedrooms and stairs. Works well on the hardwood on my main floor too. Reasonable weight and cord length. I already knew from an earlier review that it wouldn't fit under furniture, but I can use my Eufy for that, so no problem - the high traffic areas that need a stronger suction was really what I bought this for. If it continues as it's started, it will be a good buy and well worth the money. I have had two Shark Rocket stick vacs in the past that are super easy to use, but the motors just don't last well, even with scrupulous cleaning of the filters. I'm hoping for better with this Bissell.

[@KSToh]

It really is! I have a golden retriever at home.

[@aerieita3708]

Thank you very much for this video! My laser tower was full of cat's hair and the vaccum didn't move anymore (laser error). Opening the laser tower I could clean it well from hair and dust and the roborock works fine again!!!! So much time and money are saved thanks to you! 🤩🤩🤩

[@KSToh]

Nice! Please subscribe to my channel!

[@BloodOnTheHorizon]

Thanks for the instructions. This solved the error

[@KSToh]

If you find it useful, please subscribe to my channel! If the problem happens again, you need to change motor. Follow this video: kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@KGiammalvo]

It worked!!! This happened to me twice. The first time I received the error it was covered under Warranty and the company send me a new LDS. Then it happened again 6 month later. Thankfully this did the trick!

[@KSToh]

Great for you. Kindly subscribe to my channel. If it happens again, you may need to change the motor. Please see my other video.

[@blowgunguy]

Hey man, I tried this and it worked intermittently. Now I'm getting the same error again, and my robot is driving backwards and trying to clean before giving the laser sensor error. Any idea what could be the issue? I've dis and reassembled it a dozen times.

[@stefanaleksandrov1684]

try to change polarity of motor.After repair mine do same and LDS is spinning overclockwise shoud spin clockwise i think thats why robot drive backward.i dont have better explain but mine now working fine.Sorry for my bad English

[@KSToh]

I did not dismantle the wires. Did you? One solution is to our AAS a new motor. Less than US$1. Watch my other video. Please subscribe!

[@oxanatacu2345]

Pawpwwoww

[@maubar]

Thank you very much for taking the time to share your experience! The video is very straight forward to follow, and more importantly for me, it worked like a charm!

[@KSToh]

If it happens again, you need to change the motor. Please like video and subscribe.

[@ericviston]

Great trick!!! thank you This solved the error. But I want to know the root issue because it happened again a few times. Very annoying

[@KSToh]

Always welcome. I have no idea. I think the motor is not good. I have another video to change the motor. There should be a link somewhere at the end of this video. Please subscribe to my channel!

[@ghostinthenutshell3207]

Same here, as MANY others. The motor runs so how can it be the motor? The root of the issue is within the logic boards perhaps?

[@KSToh]

I changed my motor and the error has yet to recur. Please subscribe to my channel!

[@nani88nani]

This totally worked! If you don't have a 9V, I found it worked with a C size battery awesome. Thanks so much OP, really appreciate it

[@KSToh]

nani88nani you are welcome

[@KSToh]

nani88nani please subscribe to my channel.

[@dhsu04]

Thank you! Instead of jump start the motor, I simply spin the motor a few times, clean the dusts, and make sure the connections are secured. Then, it works!

[@KSToh]

Great! But it might happen again. If jump start does not work, you need to change motor. See my other video. Please subscribe!

[@flybuster]

tq man! my robot is back to life again after i followed ur method to jump start the motor 👍👍👍

[@KSToh]

Great 👍 Please subscribe.

[@alisdairhorgbury430]

Thank you, I followed this and then realised my Roborock actually has it's own USB plug for this very reason! Even easier.

[@KSToh]

Oh. Which model is that? I had no idea. Please subscribe.

[@alisdairhorgbury430]

@@KSToh Roborock S5 Max.

[@KSToh]

@@alisdairhorgbury430 oh

[@Rich-pi6jk]

Worked a charm. Thank you! For those of you using a usb, some of them don't have a black cable. The equivalent of this is the wiring that wraps around the red, white and green cable.

[@KSToh]

Rich great! Please subscribe to my channel!

[@KSToh]

Rich if the problem recurs, you need to change the motor. Watch this video on motor change: kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@PETERBRAVOS1]

I really appreciate your guidance...I became a Roborock mechanic specialist...

[@KSToh]

Cool! So far I have changed a number of things. Let’s share! Please subscribe. If the error 1 happens again, you need to change motor. Usd$10. Please watch my other video.

[@CosmosGR]

Your instructions are really "life-saving"! They solved my problem directly! Thank you so much! I did not understand why this problem occurs or how it is done and solved in this way. However, your solution works perfectly!

[@KSToh]

Cool. Please subscribe. But note that eventually your motor might fail again. But a new motor for less than UD$10. Follow my other video to change motor!

[@KSToh]

I also do not understand. 😬

[@animaldodeserto]

Thank you so much, I had this same problem and fixed it by following your steps. I used the USB cable and connected it to a powerbank, it worked perfectly. I tested it and it's working normally now. Thanks!

[@KSToh]

Good for you. If it happens again, you may need to change the motor. Cost below 10USD. Watch my other video. Please subscribe.

[@animaldodeserto]

@@KSToh It happened again, so I guess I'll have to buy a new head right?

[@KSToh]

@@animaldodeserto yeah. Unfortunately.

[@animaldodeserto]

@@KSToh Just ordered a pair. Do you think it's of any use to do a longer jump start?

[@KSToh]

@@animaldodeserto I don't think so.

[@dtm9349]

Thanks a million! It worked!!! I spent £7 to buy wires and 9v battery, that’s all:)👍👍👍🔥🔥

[@KSToh]

Great 👍 but £7 is a lot of money to pay for wires and battery! Anyway, if it happens again, change the motor. Cost less than USD10. Please like video and subscribe.

[@mikeghukr]

Thanks you so much! I just did the same and miraculously the robot began working. Gosh, so glad I found this video.

[@KSToh]

Fantastic! If the motor spoils again, need to replace it. www.reddit.com/user/kstoh/comments/p9bscm/roborock_error_1_lds_malfunction_jump_start/?context=3

[@mikeghukr]

@@KSToh Yep... It failed again. Going to buy the replacement. Thanks again!

[@hendrikzitterbart]

Great Job! couldnt believe it would work the first time i saw the video... but it did! my robo is rockin again :) Thanx for the video!

[@KSToh]

Glad I could help! Please like and subscribe!

[@hazelmann3848]

Thank you for this easy to follow guide to revive my roborock, a simple defibrillation and it's alive once more.

[@KSToh]

Great to hear! Please subscribe. If it happens again, you need to change the motor. Less than US$10.

[@tomwillsher5916]

Thank you. Very helpful. Worked a treat. Saved the cost of a new Roborock.

[@KSToh]

Glad to hear that. Please subscribe!

[@Mikhail259]

I had the same issue, now it works perfectly. Thank you for your work!

[@KSToh]

You're welcome! Please like the video.

[@atvtargoviste]

Surprisingly this fix works. I've cleaned the motor shaft because it was full of tangled hair and mounted it back. It was not working. After jump starting the motor with a 9v battery it works.

[@KSToh]

Nice. Kindly subscribe. If it happens again, you need to change the motor. Please watch my other video.

[@Pmiketube]

Thank you! Very good video. It was spinning, but very slowly. It was caused by dust and hair entangled around the motor axis. Such thing can be the problem, so I advise that striping cables to check the motor to be a later step on the procedure!

[@KSToh]

Good suggestion! Please subscribe! If the motor fails again, you need to change motor. US$10. Watch my other video.

[@viktoraxelsson6213]

Thanks dude, just revived my S50 with a powerbank and an old cut off micro-usb cable thanks to you. Subbed :)

[@KSToh]

Thanks for the sub! Great that it works.

[@lykkesopp1]

Worked like a charm! Excellent guide chapter by chapter!

[@KSToh]

Glad it helped! If it happens again, change the motor. Please like and subscribe!

[@johnsonbabyshampoo]

Thanks for the video! Greatly appreciated 🙂! I followed the video and it moved for a bit before it got the same error message again. Maybe I need to buy a new LDS sensor.

[@KSToh]

You can just buy a new motor. Less than USD$10. No need to buy the whole LIDAR.

[@aleksandrakrolak]

Thank you for helping, kind stranger! 🥰

[@KSToh]

Always! Please like video and subscribe!

[@anthonyclancy308]

thanks for the video! used it on my Dreametech D9 Vacuum which is very close in design to this. Was able to jump start the motor and the vacuum started working again as it should!

[@KSToh]

Glad I could help! You need to change motor if it happens again. Please subscribe.

[@MrCrowbar666]

This worked for me with a 9V battery! Thanks a lot for your vid!

[@KSToh]

Great. Please subscribe. If it happens again, you may need to change motor. See my other video.

[@letsbake3029]

This video is a great help to save my robot! I‘m almost going throw away the robot thinking it is beyond repair since I have been using it daily for 2 years. Thanks for sharing this video instruction!

[@KSToh]

Cool. Please subscribe. If it happens again, you may need to change the motor. Cost less than US$1. kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@voidytb]

used these instructions second time. previous was ~7 month ago. fixed my robo-cleaner second time :) probably I'll need to change the motor in some time - but for now it still ok thank you very much!

[@KSToh]

Cool. Please subscribe. If it happens again, you need to change the motor. Less than US$10. Watch my other video.

[@KSToh]

kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@pigmo76]

Great video. I jumped the engine, now it works. Clear video, complete details, very good edition, complementary links and info; well done. Thank you.

[@KSToh]

Cool. Please subscribe. But the motor might fail again and you need to change motor. Good news is less than US$10. Follow my other video to change motor.

[@flavapuff69]

Mine did the error one today and I ran across this video. You're a life saver! Thank you!

[@KSToh]

Great for you. Kindly subscribe to my channel. If it happens again, you may need to change the motor. Please see my other video.

[@KSToh]

kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@max_dsouth9]

I used a USB cable and fixed it. Thanks so much!

[@KSToh]

Great! If it happens again, you need to change the motor. Watch my other video. Please subscribe!

[@fotodille]

Great fix. I just had the fortune to find your video first and to jumpstart the motor was exactly what was needed for my s5 too. A complete no-cost solution. Do you care to explain why this happens and why it works to fix it like that? It's not anything I've ever come across before.

[@KSToh]

Honestly I have no idea. Maybe like heart defibrillator? Anyway, if it stops again, please change motor. Watch my other video. And please subscribe.

[@scottsimpson8290]

Mine had the error 1 message. Thanks to you, my Roborock finally works again! The motor from Alibaba took nearly a month to get here from China, but it was worth the wait!

[@KSToh]

Good. Please subscribe.

[@tucher_one]

I don't know, how exactly, but it worked in my case. Thank you so much!

[@KSToh]

Good for you. Please like the video. If it happens again, please change the motor.

[@olegchubykin5206]

This is my first robot vacuum after much research🌼 and I’m so happy I purchased this. Wow! After one clean I didn’t realize how much dust had accumulated in my new carpet. Great for daily cleaning especially if you own a pet. I wish I would have purchased this sooner. Highly recommended!

[@KSToh]

Nice. Please subscribe.

[@rbaker9854]

It worked!! Thank you for saving me packaging up a return to Roborock!

[@KSToh]

Cool. Please subscribe. But if it happens again you need to change motor.

[@domenicodesign100]

Worked like a charm... thanks for the detailed video. What happens though when the error happens again after the next use, can't keep jump starting it, what would I need to replace?

[@jonathantitane6191]

same problem. The engine is running, I close the robot, I start a cycle and after 10 minutes another error 1

[@KSToh]

You would need to change the motor. Less than USD$10 from www.aliexpress.com. See my other video on motor change..Kindly subscribe!

[@domenicodesign100]

@@KSToh correct I ordered the motor and installed it today, works perfectly!

[@germanejfan]

Helped! Laser Head was blocked by a tiny stone. Could hear the scratching. Cleaned. Working again. 🤗👍

[@KSToh]

Good to hear that! Kindly subscribe to my channel!

[@dannimalka669]

It worked for me, I had some troubles connecting the red and black cable to the motor but found out that I could just wrap it around and it worked wonders. Thank you for this DIY fix you saved me a lot of time and money.

[@KSToh]

Great. Please subscribe. If it happens again, you may need to change motor. See my other video.

[@veeaa]

Thanks! My motor still worked perfectly with the 9V battery but not when installed in the robot. Replacing the motor solved the issue nonetheless, so I'd recommend to replace the very cheap motor in any case.

[@KSToh]

Yes. Replace motor would be better! Please like and subscribe!

[@gkptech]

Like many others down here in the chat, thank you for saving my life! This video is great! Robot is now working just fine again! Cheers!

[@KSToh]

Cool. Please subscribe! If the motor fails again, you need to change motor. US$10. Watch my other video.

[@gkptech]

@@KSToh Actually it just failed again, without finishing a full clean. I have ordered the motor now. Thanks again

[@inouehanzo]

Thanks! Really helpful, and it worked! The motor jump started and the laser thingy could work again.

[@KSToh]

Glad it helped! Please like video and subscribe.

[@JhustineProvido]

I've done it twice already. first time it broke was like a year ago. hopefully it works a long time again thanks!

[@KSToh]

Cool. Please subscribe. If it happens again, change the motor. Watch my other video.

[@adriandubach7529]

Very good video, my warranty had run out so I had to fix it myself or pay for repairs. Worked wonders and it's in process of cleaning the apt as we speak. Thanks!

[@KSToh]

Good for you. Please subscribe.

[@Meck90]

Hi! Exactly the same problem and this video did the job! Really well done! Cheers from Portugal!

[@KSToh]

Great to hear! Kindly subscribe. If it happens again, you need to change the motor. See my other video.

[@eRacoon20]

Giving the motor a jump start fixed my problem, big thanks! Took only 10min. :)

[@KSToh]

Good for you. Please subscribe to my channel!

[@eRacoon20]

Died again after ~3h of cleaning time while it was cleaning... guess I will get a new motor for the next repair.

[@KSToh]

@@eRacoon20 I posted an updated video showing the motor change kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@lucasdooms3360]

Thanks alot! Not a lot of easy to follow videos online for these Chinese machines, appreciate the info! Fixed my error. Gonna sub right now

[@KSToh]

You're welcome! If the error happens again, you need to change the motor. Less than US$10. Watch my other video.

[@kenenjee]

Thanks KS Toh. A good and clear repair approach.

[@KSToh]

Cool. Please subscribe. If it happens again, you need to change the motor. Less than US$10.

[@KSToh]

kzbin.info/www/bejne/qIexmWNpm9WcqJY

[@eLiaSDaLe]

Thank you! This worked. I had to cut an old USB cable since I didn't bother to go buy batteries. So far, so good. It's been vacuuming for 10 minutes now without stopping. Amazing trick. So easy :)

[@KSToh]

Glad it helped. Please subscribe.

[@mdbrot]

Hi. Thanks for the video, it is very clearly filmed. please can someone explain why the motor is not working when mounted but it works when dissassembled ? Thanks

[@KSToh]

No idea. If it happens again, change the motor.

[@Rossy1995]

Awesome video ! For me it was only necessary to remove the top of the lds scanner and then clean it by blowing air

[@KSToh]

Good for you!

[@karstenfreihube5993]

Thank you so much from Germany. In my case it was just the rubber ring that was not in position anymore. Fixed it and that was it.

[@KSToh]

Cool

[@TheKaoMati]

Did it with USB, fixed the problem. Thanks!

[@KSToh]

Cool. Please subscribe.

[@franean]

KS, you rock! Very simple instructions, followed it to the T and it worked like a charm!

[@KSToh]

Nice. Please subscribe. If it happens again, you need to change motor.

[@jonruud]

Thank you so much! This video is clear and easy to follow. Got an error | on my S7 and all I had to do was reposition the drive belt.

[@KSToh]

Glad it helped. Please subscribe.

[@roberth7288]

Fixed my error. I thought I was going to have to buy a new one. Thank you.

[@KSToh]

Cool. Please subscribe.

[@josephpeeler3153]

Thank you for this video. A little 9v Jumpstart fixed my unit

[@KSToh]

Glad it helped. Please subscribe.

[@GregorWroc99]

Thanks. In my robot was some insect (larva) inside the laser sender. I just remove it. Works fine :) thanks for support.🙂

[@KSToh]

Cool. Please subscribe

[@TheAnnien]

thank you for the amazing tutorial with all the steps! great work

[@KSToh]

You're very welcome! Please like and subscribe!

[@mikaelnikula335]

Cool beans! Followed the immaculate process and jump started the motor, and it works again. 🙏🏼And if the error comes back I know now how to replace it. For those of you who did the jump starting, did the error message come back ?

[@KSToh]

Cool. Please subscribe. If it happens again, change the motor. Watch my other video. Less than US$10.

[@nabs]

Worked flawlessly on my Roborock S6, thanks! My USB cable had no black wire, but its equivalent is wrapped around the other wires. And I used a USB adapter that’s able to deliver 9V

[@KSToh]

Good for you! Please subscribe to my channel!

[@Issa_eth]

Thanks again, 6 month latter again error 1. searched for this video again and haha it helped again xD

[@KSToh]

Cool. Please subscribe. Change motor. Costs less than USD$10.

[@bishybish]

Amazing video - practical and very clear instructions! I was able to fix my roborock s5 with this video. Thank you so much!!

[@KSToh]

Glad to hear that. Please subscribe!

[@bishybish]

@@KSToh done :)

[@yavuzia]

Thank you very very very much❤

[@KSToh]

You're welcome 😊 please like my video and subscribe!

[@KGran343]

This worked perfectly. Thank you very much for this informative video, saved us from having to send it to a repair shop.

[@KSToh]

Cool! If it happens again, you need to change motor. See my other video. Kindly subscribe!

[@mntran]

It worked for me. Thank you so much for the video. Save me from buying a new one

[@KSToh]

Great to hear! If it happens again, you need to change the motor. US$10. Please subscribe.

[@rave28menon]

Thank you, you have done hundreds a great help by making a great video, I did exactly what you had explained, it has done wonders, thank you again🙏

[@KSToh]

Glad it helped. If it breaks down again, change the motor. Less than US$10.

[@wolverinedf813]

Thanks for the super helpful video! Followed the steps and we were able to fix our hoover!

[@KSToh]

Glad it helped! Please like video and subscribe!

[@TheToxicity187]

First. This helped me fix my problem, thank you for the good video. Second. The fact that the sensor needed a jump, is that an indicator i should be prepared to replace it in the near future you think? Is it going bad? Or with the jump should last a while?

[@KSToh]

You should prepare to change the motor. Watch my other video. Cost less than USD$10. Please subscribe.

[@TheToxicity187]

@@KSToh I didn't see another video on that, put the link here and I'll check out it. And I had trouble finding the part for that price, found it for like 60 bucks!

[@KSToh]

My other videos is similar but it says “Change Motor”. I think there should be a link at the end of this video? KZbin does not allow links to be posted but check my Reddit post, URL in my video description.

[@azndaudau]

Brilliant video, it saved my vacuum and restored the lds perfectly.

[@KSToh]

Glad to hear that. Please subscribe!

[@svenkruger9964]

Danke für die Anleitung! Hat geklappt!!! Allerdings erst nachdem ich mehr Strom aus der Steckdose bekommen hatte da das mit dem USB Kabel zuerst NICHT funtkionierte. Aber wie gesagt, aus der Steckdose hats geklappt ... Vielen Dank

[@KSToh]

Good for you! Please subscribe to my channel! Schön für dich! Bitte abonniere meinen Kanal!