Roborock S7 factory reset

[@abrilakgun]

Ive been trying to restore factory settings for the past 10 minutes and I couldn't do it. Instructions were confusing, I watched their official KZbin video and I couldn't do it. Finally, after watching your video, I could do it! Thank you!!!!

[@rebeccapearsonlo5754]

Thank you! The factory reset instructions on Roborock’s app & website didn’t work but this did! Thank you for saving my sanity!

[@chriswang2140]

Great sharing, the instruction on Roborock official youtube doesnt work, your steps is clear and effective, thanks.

[@spacecolonist2337]

Working for Q7 max! GOD BLESS YOU!!!

[@alesynkin]

Finally I was able to reset my T7 Pro... Now it works!

[@chouchou5257]

I can't reset factory settings, when i hold only cleaning buton (because i have previously version) and press reset button for 2 sec, i have the power button flashing but I don't have a voice saying "restoring factory settings", the power button light just keep flashing and nothing happen. Do you have any ideas about what is the problem ? Thank you

[@HaimKapuza]

What model do you have?

[@chouchou5257]

@@HaimKapuza Roborock S7 maxV Plus

[@HaimKapuza]

Sorry for the late replay, did you try to contact ROBOROCK support? Maybe it's faulty

[@chouchou5257]

No worries. Yes i did contact them and they told me that under such circumstances i have to use product warranty. So this morning i brought it back to the shop and now I'm waiting

[@pixiies03]

This is always the same restore method now ? Impossible to do with my roborock s7, just restoring wifi settings with your method

[@HaimKapuza]

Yes, when this happens there is a problem with the unit, contact customer support

[@OliGamePlay]

its new method. just use only home button and reset

[@pawescibior6387]

Do You know how to remove error nr 4? I clean all sensors and nothing

[@HaimKapuza]

You should take it to the lab it may be an inner cable problem, try to reset the app as well or clear memory

[@Brunofeitosa83]

Hi, My name is Bruno, I live in Brazil, and I have a Roborock S7. Recently, it got lost on the map and entered a no-go zone inside the shower box, which was slightly wet. Since then, it has stopped vacuuming. It turns on but doesn’t perform the cleaning and keeps restarting repeatedly. Is there a solution? Could you share any tips to help me, please? Thank you in advance! ---

[@HaimKapuza]

I’m sorry to hear that, I think the problem is the main board it’s probably got corrosion, in that case you will have to replace it.

[@Brunofeitosa83]

@ tks

[@romainbac8845]

Hello my mop isn't recognize, I've tried the hard reset but nothing is working...

[@HaimKapuza]

You can try to replace the mop unit first to see if that's the problem. Other wise it's an internal error, there is a small board that recognizes the unit and needs to be replaced.

[@romainbac8845]

@@HaimKapuza how WE do that ?

[@HaimKapuza]

you can send it to a lab to be replaced if its still under warranty, this is the part that need to be replaced "Tanos S water tank&mop cloth mount detection harness front bumper assembly"

[@milidiyasha]

why do you need to reset the settings? Im trying to connect my robot to wifi but no luck. Ive trIed everything. Do you know the solution? thanks

[@HaimKapuza]

Did you connect it before? If so then try to reset the wifi by pressing both home button and spot cleaning for few seconds until it says resetting wifi. Then open the app and look for it. Make sure you're wi-fi is set to 2.4 GHz not to 5 GHz

[@milidiyasha]

@@HaimKapuza thanks! I’ve done that many times. I managed to connect it after I used my Samsung instead of IPhone and after that it connected to iPhone as well)

[@milidiyasha]

@@HaimKapuza it was my first time to connect it

[@Priamo_177]

Grazie amico

[@Backtoflying]

So helpful!

[@andrewkk]

Thx bor

[@Basiniac]

Thanks !

[@hikakin_mania440]

さ

[@forzagrobnik]

Did anyone had this problem? kzbin.info/www/bejne/f5vbqqaje6qHeaM