Roborock S7 MaxV Ultra Dock Hot Air Dryer Module - Full Test Results!

[@mccalljeff]

It is rare to get content like this anymore. Directly to the point, and covers everything! Thank you!

[@jamie.andrews]

Glad you liked it!

[@polowak]

oh my god! who are you? why doesn't anyone do tests like this? you are a genius! who could have questions? absolutely everything is clear and so well explained

[@jamie.andrews]

Lol thanks so much! I try and show different information than other channels.

[@polowak]

@@jamie.andrews I subscribe directly greatings from switzerland

[@peterhongkp]

Just got my dryer module. Your instructions and test are crystal clear, to the point and simple to understand. Keep up the great work.

[@jamie.andrews]

Glad I was able to help you Peter!

[@anthonysharp4404]

How are you finding it please

[@RidenCT]

Thank you Jamie. Even if 1 year has passed, I'm finding this content extremely useful for my decision process. Much much appreciated

[@jamie.andrews]

Glad to hear!

[@irap1269]

I just got mine and the directions (and even the sticker on the unit) were only in Chinese. Your review was really helpful because I didn’t know there was an app setting and also because the low air flow made it seem somewhat useless. Surprised to see that it actually works. I set my drying time to 4 hours.

[@jamie.andrews]

Glad I could help you get it sorted. I too was surprised by the effectiveness.

[@jeffjames736]

Just received my dryer. Ordered it after watching your informative video (thanks). The dryer came all the way from China. It was fun following the tracking updates from Amazon. The dryer arrived with a foreign plug, but an adapter was included in the box.

[@jamie.andrews]

Great to hear!

[@DC9848]

Best robot vacuum content KZbin with a wide margin. No nonsense, straight to the point. Thank you Jamie for your excellent content & KZbin algorithm for recommending your content to me!

[@jamie.andrews]

Thanks so much!

[@MikeWeiner]

I wouldn't call the hot air dryer module "100% necessary", but I do like having it in place. Its so quiet I wasn't sure it was working. Although, since I've had it (and its been months now), I've never had a smelly mop with the Roborock. For my personal recommendation, I like having it there and having the mop dried whenever it gets wet. I can't help but believe it must extend the life of the mop a bit and for that I'm appreciative. So yeah, maybe not 100% necessary, but adding it to the unit makes Roborock the very best vacuum out there...and goodness knows I've tried a bunch of them!

[@jamie.andrews]

Mike I think you are spot on with this and I now have tested half a dozen robots with hot air drying docks. I too prefer them.

[@tideloohamar3727]

Thanks for the thorough coverage! Would be amazing if you can get your hands on the China-only G10S plumbing system for the Ultra dock. Hope that gets released out of China soon!

[@jamie.andrews]

If it gets released for the US Market I will get it for sure! Thanks for your support!

[@vetrinadomotica]

I’ve done mine by myself. It’s relatively simple, but it breaks the warranty. kzbin.info/www/bejne/mnrWamWBqbhgfJo

[@Dagot1948]

I've had the S7 MaxV Ultra for 3 weeks now. The mopping head is washed after a mopping job. The unit parks into the dock with the rear portion, where the mopping head is, is somewhat elevated and exposed to the air in the room. The mop dries in a few hours. You might also just remove the mopping pad (a real pain, I know) and let it air dry. For people who run frequent vac/mopping jobs, or have lots of messy jobs, the drying unit might be just what you need. Thanks for this excellent review!

[@miiasiin]

having let them air dry, you haven't noticed any problems with smell-/moldiness? :) just ordered my unit, didnt realize, the (missing) heating could be a problem

[@Dagot1948]

@@miiasiin I haven't noticed any odor at all. I'll usually put one mop head in the washer once a week, replacing it with an extra. You can also just wash the mop with some dish detergent in the sink, rinse, and air dry.

[@miiasiin]

@@Dagot1948 i see, thank you :)

[@Q8Webmaster]

@@miiasiinWhat did you mean by the missing heating? I assume you order the drying unit which is supposed to be the provider of the heating 🙈

[@miiasiin]

@@Q8Webmaster i was hoping to skip having to order it :) so far, so good! :)

[@movingloz]

I haven’t ordered my robotics yet and just heard about this dryer module. I had no idea that the wet mop pad was an issue but definitely gunna get this as well when I order the unit. You’d think now that they’d include it in the new units that they manufacture hey.

[@jonathanpark7658]

I haven't found it to be an issue. I am using the cleaner they sell in the water. The dryer is a neat idea but I'm not sure it's necessary.

[@acdnintheusa]

Great review! It’s on my wish list but I’m not convinced that I need it. After every mopping I empty the dirty water collection tank and swap out the wet mop pad for a fresh, dry one. Takes all but a few minutes. Still beats mopping my floors manually by a long shot. But I’ve rationalized other purchases for less of a reason in past. Time will tell.

[@jamie.andrews]

Totally understand. It is a convenance feature for sure, but there are ways around it.

[@somerandomperson8282]

Swapping out the pad manually after every mop is directly against what this robot and dock are supposed to provide: full automation.

[@acdnintheusa]

@@somerandomperson8282 Perhaps. However, it's not attainable without the heated air dryer. The pads get a sour smell when allowed to dry naturally while mounted to the bottom of the robot. That smell is imparted on the floor surface if the pad is reused after that drying method. For now, I will take the 30 seconds needed to swap out the pads.

[@BenPellowMusic]

dude youre the best reviewer out there. Keep it up!! thank you!!

[@jamie.andrews]

Thanks! I appreciate that Ben!

[@slivka_1]

The new S7 Max Ultra (without the camera) will interestingly come with the dryer module installed in the dock. I think they will be released in summer, I’m hoping by autumn it will be available in Europe. Thank you for your very informative video

[@jamie.andrews]

In the US the S7 MaxV only comes with a camera. Are you saying there is a S7 MaxV without one?

[@netoisthebest]

​@Jamie Andrews I think they're confused with the new s8 since it comes with the dryer. Unless they're making a different s7 model?

[@jamie.andrews]

@Ernie Saldana There is actually a S7 Max Ultra, but it has a camera.

[@somerandomperson8282]

@@jamie.andrews He is obviously saying that Slivka is confusing the S8 Ultra with this "new S7 Max Ultra" he mentioned.

[@jamie.andrews]

@@somerandomperson8282 Well I was wrong about the S7 Max Ultra. It does not include a camera after all.

[@suewaghorn8311]

Great video…! I just got my S7 MaxV Ultra and tossed up whether to get the heat module. I did since it was on special for Black Friday…and after watching this video l am so pleased that l did. I really wondered if it would work…but seems you’ve proved it does. Thanks so much..!!

[@jamie.andrews]

Thanks!

[@appiekaufman]

Nice short clear test! Complete understanding what it does!

[@jamie.andrews]

Glad you enjoyed it!

[@debscarlett5573]

Definitely need. This feature was the only one that detoured me away from the model. I chose the Omini- because I didn’t want a wet smelly mop, just hanging out.

[@doejohn6197]

Did you end up switching? I’m kinda in the same boat

[@bluefandango]

excellent and to the point. if i may you overlooked one point: energy consumption. it can be interesting to know how much it is you have to pay to dry the appliance. edit: indeed it is detailed @03:08. i overlooked it. maybe some written piece of information on such points could be helpful in your next vid. ty for your good work

[@jamie.andrews]

Thanks! I covered it at 03:08 in the video as far as AMP and Watts. The exact consumption will vary and depend on several factors. 1. How often you mop. 2. How long you tell it to dry the pads for. It has 3 different durations to select from. I suspect someone could take my energy consumption information and figure it out based on their usage. It is really pretty insignificant usage imo. Thanks for watching!

[@anonylesss]

by the way, with the latest S7 firmware & app update (for Android), they finally fixed the bug in which the cleaning mode would always stay on "deep" once used, without any notice in the app (meaning, no vacuum at all). and it only took...7-8 months

[@jamie.andrews]

Glad to hear they fixed it. I can tell you there are bugs (some major) in other brand robots that never get fixed. I have tested all major brands and RR updates firmware for their robots the most. I agree though that 7-8 months is too long to wait. Thanks for the update!

[@kaywho5542]

it's 100 percent needed IMHO to prevent germs from growing on wet mop since it has an odor without the drying module.

[@adrianomeis184]

I was waiting for this review so much! Thx

[@jamie.andrews]

Glad to help!

[@famtsla]

I just picked this up like a week ago. It seems to do really good. It was just a nightmare to get a hold of lol.

[@jamie.andrews]

They are almost always out of stock.

[@jessediaz918]

I had to order it from a company in China. It was $38...$58 with shipping and everything else. But it was a genuine product. Just had to have an adapter for the power cord but it came with it

[@BrenacT]

Got one and works ok. From China as not available in EU just yet.

[@lisogato2000]

I am so happy that it was a success! Could you give us a link on where to buy it?

[@BrenacT]

@@lisogato2000 Ali express

[@DanielElia2036]

It works with the "auto" mode? Here in Italy AliExpress is the only way to have this dryer!

[@BrenacT]

@@DanielElia2036 yes

[@JasonDenison]

Agree!! Why is it white and why the black cord? 🤦🏻‍♂️ I love everything about this except the drying issue...

[@jamie.andrews]

I have no clue but I wish it were black or gray.

[@Blind.]

When you mentioned the 18 hours it took to dry, I thought it was WITH the module. I was like "WHAT A BUST" haha

[@jamie.andrews]

Oh lol no that was a baseline. I bet you were expecting that based on the low power numbers.

[@brandonhorn6218]

Glad to see a review on this I'm looking into getting the ultra and didn't know if the mop dryer was really needed. Did you ever smell your mop when it was just sitting there or mopping or was it when you just took it off or turned it over?

[@jamie.andrews]

I only smelled it when I removed it.

[@xeon2k8]

@@jamie.andrews you mentioned on the vid that it smelled a bit when it was still wet. But did it smell when it was completely dry after 18h? Im wondering if this dryer is really necessary

[@jamie.andrews]

@@xeon2k8 No real strong noticeable smell after it dried. I don't think anyone really needs it, but that could be argued also. I prefer having it.

[@jonathanpark7658]

@@xeon2k8 a bit late but I don't notice any smell from mine. I use the cleaner they sell in the water. Not sure if that matters.

[@jonathanpark7658]

@@jamie.andrews did you use the cleaner in the water?

[@beeceelad]

Thank you so much Jamie, great analysis and review! I personally think using a hair dryer would save me about $100.

[@mil3761]

Fantastic video and very well done. Would love to see how the S8 Ultra compares.

[@trriamera]

Great review Jamie, keep it going!

[@jamie.andrews]

Thanks a ton!

[@bigbadboogie6842]

Have the s7+ so not an option for me, but haven't really worried about a dry mop. Rather the opposite I would prefer pre humidification before starting to mop :) as initial mopping does nothing. Nice review 👍

[@jamie.andrews]

Thanks for sharing

[@rickadrian2675]

Great video. I am looking to buy and S7 etc. etc. etc. etc....... and just found out that these units existed. At $250Aus I might see how we go with natural drying in Melbourne as our weather is far less humid that Florida. At least I know what they do and how well they do it.

[@jamie.andrews]

Thanks! I would wait and see if you have a problem first.

[@juliedevenish5682]

Just purchased the Ultra unit today from “Robot Specialist”. They included the dryer unit free, had the best price, and from what I can tell they are very well respected as a company with after sales support etc. They are in Vic too!

[@T.O.P.S]

Thanks for the review. Not necessary at all. But its a feature I would use if it came standard

[@slapsak1]

hi, thank you for your videos. how long drying is the best setting. Thank you in advance for your answer. best regards, Daniel.

[@jamie.andrews]

I would say 3 hours should be fine for most.

[@globalzero]

insane review u need more people to learn about your channel!

[@jamie.andrews]

Ty! That is always the struggle!

[@ameyab101]

Thanks for the clear instructions!

[@yis9779]

Nice work, great review

[@malumello17]

I would love to watch a review of yours about xiaomi mijia omni s1 It seems pretty similar to dreame l10 and roborock s7 mxv ultra, but not as expensive.

[@jamie.andrews]

It is on my list! Thanks for watching!

[@malumello17]

@@jamie.andrews thank you

[@brandonwatson6702]

I just installed it too and unfortunately it’s definitely a must have.

[@xeon2k8]

why is so? did the mop smell bad without it? even after completely dry on ambient air?

[@brandonwatson6702]

@@xeon2k8 Yes, the mop gave off a bad smell while wet and even completely dry. To the point where it left a smell on the floors but the drying module plus Omo cleaner has completely eliminated it.

[@spacecowboy07723]

Thanks, going to buy one now.

[@spacecowboy07723]

What floor type do you have? That it left a smell on.

[@xeon2k8]

@@brandonwatson6702 i see what you mean. Though I would be a bit sceptical that with the Omo solution and without the dryer it would still smell. When you said it smelled where you using the solution?

[@jackekberg5689]

Great video, thank you! - Quick question, so does this also heat up the water or change the temperature of the water when moping ?

[@jamie.andrews]

No, it only blows hot air on the pads.

[@henrylewis7652]

No, it does not heat the water

[@lucettestunt]

Hi ! Thanks for informations sharing! Does anyone knows if it's S7 pro ultra compatible or only for MaxV ultra dock? And tested it? With Ultra Pro I have no drying module setting on roborock app like in the video at 2:20min (kzbin.info/www/bejne/hJS1gn2KqNObZ9U) and i don't know if i could purchase it.

[@jamie.andrews]

We do not have the S7 Pro Ultra in the US so I can not comment myself. Maybe post the question over on the Roborock Reddit. www.reddit.com/r/Roborock/

[@lucettestunt]

@@jamie.andrews I find more information in reddit in fact. Drying module isn't available for S7 pro ultra for now. Roborock team reply to someone who ask if it will be and they say " Hopefully, they will be able to manage it in the future" Maybe someone will find a tip to hack it before lol it seems to be really helpfull because it's annoying to remove the mop each time it's used. thanks for your answer

[@adiands850]

@@lucettestunt On Reddit there is at least one post where someone has attached the dryer module to the S7 Pro Ultra dock. They said you have to manually press the button to operate the dryer, every time you want to use it. The reason is that the infrared sensor in the dryer module does not communicate with the S7 Pro.

[@marion5833]

thanks a lot for explaining and testing.

[@jamie.andrews]

You are welcome!

[@lenardcody8357]

Hi Jamie, It seems that the dryer module is out of stock in the main website and in Amazon, therefore do you know a different website were this module can be ordered from.

[@jamie.andrews]

Unfortunately I do not. They briefly came back in stock on Roborock's website the other day but quickly sold out. Keep checking in.

[@xray_11]

Hi Jamie, great videos as always! Despite cleaning it thoroughly , my S7 MaxV Ultra started making unusually loud noises when vacuuming - have you heard of feedbacks as such? Cheers!

[@jamie.andrews]

I have not. You may want to post a sound clip on the Roborock Reddit. www.reddit.com/r/Roborock/

[@bodosko]

Very good content, straight to the point. I bought the chinese module from Aliexpress, its rated at 220V and my S7 MaxV is 110V. But if you plug the dryer on 110V outlet, it also outputs 110V to the dock, which is very logic. Also, the dock appears to be working normally with the dryer. The thing is, I measured the energy consumption of my 220V drying module plugged on 110V, and it's showing the same numbers as yours (0.55A and 38W). Very weird, since it's working on a lower voltage, it was supposed to be outputting less power, around 20W. The only explanation is if my module is actually bivolt, not 220V. Or yours is also 220V and you don't know, since you said there is nothing specified in the box. Anyone that have the drying module got different numbers?

[@jamie.andrews]

I suspect the module can accept 220V for other markets, but the plug they ship limits our version to 110V. Just a guess though.

[@bodosko]

I did more tests and the drying module is definitely bivolt. Plugged in 220V and all measures were the same, except power factor, that was 0.6 on 110v and 0.3 on 220v. Everything else was the same, even the blowing temperature (around 100F). I don't know why they would specify as 220v only.

[@beans3099]

Thanks for this video! Very clear and to the point. Loved it! Do you get a notification when your cleaning solution tank is empty? Or can you see how full it is somewhere? It seems to be impossible to check from what I can see😅

[@jamie.andrews]

Yes you get a notification when it is empty in the app and through an audible alert.

[@beans3099]

@@jamie.andrews ah, awesome to know! Thanks so much for your quick reply!

[@gruys007]

How good cleans the dock the mopping pad itself? So how many times is good to re-use it without replacing it for a clean new mopping pad? When you put the mopping pad after every mopping cycle in your you washmachine, i dont see the advantage with the dryer module.

[@jamie.andrews]

The dock cleans it fairly good, but depending on the amount of use it sees you will still need to hand wash the pad from time to time. I can not really answer your question on how many times a mopping pad is good for since there are way to many variables to give one answer. I replace mine once a year for good measure, but I don't use one robot daily. Most people with the Ultra dock do not remove it after every mopping job to hand wash it. That defeats a large reason for the dock itself. While you should remove the mopping pads and clean it by hand or washing machine every so often, if you can dry it on the dock you cut down on bad smells created when it air dries after a mopping job. If you are the person who is always going to remove it to wash it after a mopping job, the dryer module is 100% useless for you. Hope this helps.

[@person81045]

There is a Chinese version in the Amazon store. Not sure if it's the same or different. The power source is different too. Needs an adapter

[@jamie.andrews]

If it is not sold by Roborock it is not official.

[@hellonovembersun1539]

Thank for video. Just my curious, how can the module know heating duration setting from app? I ordered one from Aliexpress, shipment is in progress, may receive in next a week.

[@jamie.andrews]

It communicates with the robot.

[@hellonovembersun1539]

@@jamie.andrews via IR or something else?

[@jamie.andrews]

@@hellonovembersun1539 That is my assumption, but not positive.

[@Liaderc]

Cute spider 😂❤ 00:04

[@BrD4GOD]

Great video! Thank you!

[@spacemoon56]

For me it's really only neccisary if you live in a humid area. Mine air dries in a few hours on it's own

[@magdalenawicher4964]

Hi, does the docking station you are showing on the video has the bagless option? Or is it only an option with cyclone docking station?

[@jamie.andrews]

To go bagless you have to buy the Auto Empty Dock and then buy the cyclone canister separately. I do not see them making a bagless version for this dock.

[@awe8120]

How is the smell of the sewage bin for you? Any bad smells? Also, do you use OMO cleaning liquid? And last, do you have any bad smell from the inner water filter (lower right, where the brush moves the water before it going to the sewage pump)?

[@jamie.andrews]

Bad smells will happen if you do not clean the dirty water tank and lower dock filter on a regular basis. I clean the dirty water tank after each job and the filter once a week. Yes I use OMO for my Roborock mops.

[@awe8120]

@@jamie.andrews understood. I just think that the whole watertank/sewagetank is a bit conceptually faulty if you cannot leave the system for atleast a week without causing odour. I was hoping that the drying procedure would at minimum keep the lower filter dry because the worst stench usually builds up in that area, while the sewage tank keeps it somewhat confined. I really hope for the S8 Pro Ultra to have a better containment of the smell. 🤞

[@jamie.andrews]

@AWE81 That new Ultra dock will have the same issues unfortunately. I am not sure what the solution is honestly.

[@Dagot1948]

@@awe8120 I'm hearing that people who leave the dirty water alone until it's full are also putting in a capful of disinfectant (like Lysol). That seems to have ended the odor problem.

[@BoraHorzaGobuchul]

​​​@@jamie.andrews the ultimate solution is to use the module that some vacuums have that connects to the plumbing, for automatic clean water refill and waste water disposal.

[@mohssineej4443]

Hi Jamie. What is your opinion about the noise of this option please? 45db is high if we staying in the same room with the Roborock during this operation, no?

[@jamie.andrews]

It is nearly silent. No worries there.

[@jessediaz918]

It super low noise. When I activated it, I had to really listen closely to hear it. I used the 3 hr option for drying time

[@WiscoWrestler]

I just bought 3 mopping pads and when it's done washing the floor I replace them and let the wet one air dry. Cheaper and easier

[@jamie.andrews]

Cheaper for sure. Don't know about easier as with this you don't need to remove the mopping pads to dry after every wash job.

[@An3mon3s]

Hi, I just got the drying module. Whenever I manually press the button to dry, it will off itself after a few seconds. Does this happen? Or could it be a fault?

[@jamie.andrews]

Did you already enable it in the app?

[@An3mon3s]

@@jamie.andrews Yup! Already set it to 3hrs but it still turns off after a few seconds. I think it's a fault on my product, will ask for a replacement!

[@hamieh1]

@@An3mon3s mine is doing the same 😢 did you find any solution?

[@jamie.andrews]

@@An3mon3s Sounds like it.

[@jamie.andrews]

@@hamieh1 Where did you buy yours from?

[@nikfam86]

Thanks for the thorough review. I bought the module based on your results! However, the module option for auto drying DOES NOT appear in the iOS app (EU). Is it region specific or is there a trick??

[@jamie.andrews]

Where did you buy the module from? Make sure the firmware on the robot and you app are both up to date. I am not certain about ios or the EU unfortunately. You would need to contact Roborock for further support as this is the first I have heard of this.

[@dimitrisauli3534]

Yeap same problem buddy I'm going to contact roborock's support The base doesn't seem to recognize the module and then the app doesn't propose any automatic drying mode in the settings.. (Chinese module, EU station) Did you guys found a solution?

[@OhioBube]

Ich habe tatsächlich das gleiche Problem. In Meier App taucht die Einstellung auch nicht auf und ich habe das Modul ebenfalls aus China über Ali Express. Habt ihr eine Lösung gefunden?

[@rickrickersen5749]

​@@dimitrisauli3534 Did you find a solution here?

[@rickrickersen5749]

Hey i got the same problem. did u find a solution?

[@shannljy]

Hi, may I know what're the dimensions of the side unit? Alternatively, the width of the dock+drying module? Would love to get one but unsure if the space that I have for it can accommodate the added width.

[@jamie.andrews]

12.5 long x 1.75 inches wide. I would assume width would be your concern.

[@Hunterisadumb]

have they added the feature to turn on the mop dryer manually though the app yet?

[@jamie.andrews]

No, I suspect it is not possible.

[@KrownMotorworks]

Hey, you said it is drying after every mob washing. How it is in my case? I have to clean 5 rooms and after every room my robot go to station for washing. Will it start to drying after every room or will it drying after the whole 5 rooms? Thanks for answer and greetings from germany.

[@jamie.andrews]

It will only start drying once the robot docks for charging. So at the end of a cleaning and not during a cleaning. The drying module blows air on the pad from the front of the dock. Hope this helps! Greetings from the USA!

[@KrownMotorworks]

@@jamie.andrews hey, yes it helps, thank you very much👍

[@lenardcody8357]

I was able to find this dryer module from a seller in China that ships to the US, but I was just wondering whether a Chinese version dryer module would work with my roborock version that I got from the US or not, as I am not sure whether it draws power for the dryer module or directly from the base, because I know the voltage in China is 220v compared to here in the US which is 120v. Would appreciate your feedback on this

[@jamie.andrews]

It will not work unless your dock is 220 as well. The dryer provides power for the dock.

[@lenardcody8357]

@@jamie.andrews I see, but would it be possible to use it if I got a power converter, or would it just be safer to wait until they get it back here in stock

[@jamie.andrews]

@@lenardcody8357 You may be able to do that, but I would just wait if it were me.

[@eonecen9507]

Chinese version can be use in the US

[@LDBecker]

I tried ordering one from Roborock, but they've been out for a while, so I bought one of the dryer modules from China on Amazon - it said "US Plug," so I thought that's what it would be. Turns out it had a European plug, but came with an adapter for US plugs. Since there's no voltage conversion, it works just fine with the adapter plug. I worried because you're replacing the main AC cord with the dryer module cord, but all is well. It is a Roborock-branded dryer module and works as expected. The app recognizes it, too. I think it is important to dry out the mop pad. Here's the one I ordered on Amazon: www.amazon.com/dp/B0BNG7DRMM?ref=ppx_yo2ov_dt_b_product_details&th=1

[@matthewgillette6465]

How much width does this add to the unit? I have mine in a limited size space under my cabinets and I think this might make it too wide. Thanks!!

[@jamie.andrews]

1.75 inches. Great question.

[@auntylizzyrocks]

Do you know anything about a stinky smell when mopping in each room? I’ve checked everything and clean everything and only use a clean mop. I use the recommended cleaning solution in the clean water tank. It has to be something on the robot and not the docking station because it smells in each room. I cannot find anything. The dust bin is clean. Specifically it smells like dirty water…or puke. 😮

[@jamie.andrews]

That is a difficult one. The only thing that touches the floor is the mopping pad. Could it be your water? Do you have pets?

[@JK-dj1zj]

I guess roborock isn't going to add a second cleaning brush on the main vacuum. Hmmm

[@jamie.andrews]

No plans that I know of.

[@JK-dj1zj]

You're killin me smalls! Ugh!

[@Bushwacked487]

@@JK-dj1zj AFAIK that is a design patented by iRobot.

[@hamieh1]

Can you share the manual for the dryer please . Facing some problems .

[@jamie.andrews]

I could not find a digital copy of the manual. Did you buy direct from Roborock?

[@hamieh1]

@@jamie.andrews Ali express .

[@NAVY1968]

Thank you _ so much great CONTENT,

[@jamie.andrews]

Thanks Larry!

[@sethko123]

I have the chinese version of the module. Too bad the module doesn't appear in my app. Roborock Support says that won't happen in the future either. I have the S7 Pro Ultra.

[@Da_A7X]

same problem, but I think it does not depend on the fact that the drying module is the Chinese version because on the s7 max v ultra the Chinese version of the module is recognized. I believe the s7 pro ultra doesn't have the software to manage the module yet. We hope for some updates

[@sethko123]

@@Da_A7X I now believe that too. Exactly the same part will soon be available in Europe, only with a different power cable and international instructions. I just wonder why Roborock then says that the Chinese model will not work in the future either.

[@chixbro]

I bought it from China too and the module does appear in my app (iOS). Are you using the Xioami Home App (green logo)? I used to use that app, but the dryer modul only works with the official roborock app (red logo).

[@Da_A7X]

@@chixbro of course, we use the roborock official app ... but here the problem is that we are talking about S7 Pro Ultra ... your module, does it work with which robot? S7 MaxV Ultra?

[@sethko123]

@@Da_A7X Yes, Roborock App, the S7 Pro Ultra is Not supported at all.

[@Saeschboy]

Thank you 👍

[@samsam-oh5py]

Do they give china to usa converter or it is direct usa plug? Also it blows cold or hot air?

[@jamie.andrews]

If you order from Roborock direct it is USA plug. It blows hot air.

[@jessediaz918]

I got mine from China and they gave me a plug

[@zLyyh]

Wich Version of the App did you got? On mine is the air dryer option not available

[@jamie.andrews]

4.0.29 Android 31

[@slapsak1]

can you make video of auto dreining modul?

[@jamie.andrews]

I have it on my list to do.

[@steve4195]

How long is the included power cable, and can an extension cord be used?

[@jamie.andrews]

The power cord is 6ft long. If you used an extension cord it would need to have the same or larger gauge wire and not be very long. My recommendation is inquire with Roborock about the use of extension cords as I have no way to tell you what is and what is not safe as it is not listed on their page.

[@steve4195]

@@jamie.andrews thanks! I couldn’t find an answer anywhere and was hoping the cord would be long. The dock is already a behemoth and not exactly the prettiest thing. The only decent spot is like 5’ from any outlet. Glad to hear that won’t be an issue.

[@spfx99]

My s7maxv smells like swamp water after awhile. Did or will this help with that smell coming from the base?

[@jamie.andrews]

If the smell is coming from the base, no this will not help. If the smell is coming from the mopping pad this may help.

[@samsam-oh5py]

Does the area where the mop is washed get dry too with dryer module? I see that the area is getting totally wet after mop wash.

[@jamie.andrews]

No as air is not blown in that area. The robot turns around after being washed to charge and that is when hot air blows on it which is at the other end of the dock?

[@samsam-oh5py]

@@jamie.andrews thanks. Does the mop wash area get moldy as it stays wet longer? I was waiting 2 days to dry by itself by getting out roborock from station

[@jamie.andrews]

@@samsam-oh5py No, but it does need to be cleaned by hand every so often.

[@samsam-oh5py]

@@jamie.andrews thank you

[@samsam-oh5py]

Any idea which cleaners can be used in water tank for mopping? Hydrogen peroxide or roborock cleaner or any other?

[@maygio]

Thật tuyệt vời những đánh giá rất chi tiết Cảm ơn bạn

[@jamie.andrews]

You are welcome!

[@ryendanger9152]

Hello, I don't have the drying option on my app (up to date). I tested on apple and android... do you know the reasons?

[@jamie.andrews]

Did you turn the option on under dock settings?

[@ryendanger9152]

@@jamie.andrews in the settings dock, I don't have the "auto drying" line... I don't have the option on the application.

[@jamie.andrews]

@@ryendanger9152 Are you on the latest firmware? Are you using the Roborock app?

[@zer08927]

I would assume that this is not required to purchase if you replace the pad after each mopping run?

[@jamie.andrews]

Yea

[@cab0001]

If I let the S7 only vacuuming, does the dryer beginn to work or stays it off?

[@jamie.andrews]

It stays off.

[@cab0001]

That‘s what i wanted to hear. Thank you👍🏻

[@_adonisk]

Does this mode support the S7+ dock?

[@jamie.andrews]

No only the Ultra dock.

[@brenty4110]

Thank you!!

[@jamie.andrews]

You're welcome!

[@orrgazmo]

If only they had a black module, looks kinda silly on the black dock. I have this for downstairs in our house, we also have a dreame w10 for upstairs, the auto drying is wonderful on it. The AI on the dreame is stupid but, keeps losing the side brush and getting itself stuck 50% of the time. 😆

[@jamie.andrews]

I am testing the new L10s Ultra now and it is impressive so far.

[@orrgazmo]

@@jamie.andrews also the w10 water tank clips that hold the lid to the tank is made rubbish. Mine have already broken off after about 2 months use, have been waiting for the replacement under warranty. Besides that it’s a fairly good robot vacuum/mop for the money.

[@Sun.n.Flowers]

@@jamie.andrews This robot compared to Roborock S7 Ultra with dock, what do you think is a better buy ?

[@jamie.andrews]

@@Sun.n.Flowers I am not sure yet as I am not finished with testing. I will have a comparison video out before the holidays.

[@24antigone24]

Hello, I’ve bought the drying Module for my Pro Ultra. But the App doesn’t show me the drying funktionality in my iPhone (iOS) Can anybody help me? I’ve got the latest versions (App and FW)

[@jamie.andrews]

Make sure you enable the dryer module in the app. It is under dock settings.

[@anl1005]

Hey, Can this product be used with the s7maxv+?

[@anl1005]

And s7maxv(no station) q7maxplus(with station) is same price, which one ll be better? Ty

[@jamie.andrews]

No only with the Ultra dock aka Empty Wah Fill Dock.

[@jamie.andrews]

If you wants a vibrating and lifting mop system with obstacle avoidance go with the S7 MaxV. The Q7Max is closer to the S7 in specs.

[@M_E_T_R_O__9]

Seems like an afterthought, makes me want to just wait for the next version..

[@jamie.andrews]

It is.

[@youare5907]

Issue is we don't know when that'll be released :(

[@jamie.andrews]

@@youare5907 CES is right around to conner. Hold out a few more weeks.

[@ramyarj]

I still don’t understand why I need this. Why can’t it just air dry? Does it prolong the mop life. What’s the benefit?

[@jamie.andrews]

Keeps bacteria from forming which is not good for smells.

[@jessediaz918]

Yeah I noticed a difference. ALthough mine never smelt too bad

[@amigatommy7]

necessary in san diego

[@jeffjames736]

The dry is included with the S8 ultra.

[@Mike-gz4xn]

What we need is a Rosie robot to do all the cleaning g

[@sargemonday4801]

Great review Jamie! It's sad they make you pay extra for this. Should have been included in original purchase! Just like the bagless canister should have been included with the S7+ like it was in other countries. :^(

[@jamie.andrews]

Hey Sarge! I am a bit torn on this as I think the creation of this is more of an afterthought and Roborock listening to their customer complaints is why this and the bagless canister were released so I appalled them for offering it for those who really want it. I do agree it would have need nice for the to include it and I really think they should include it in new ones and going forward. They seem to be out of stock at the moment. Thanks for your support!

[@sargemonday4801]

@@jamie.andrews I think they should offer it as an option when you buy whole thing. Just make it cheaper as an optional add-on.

[@jamie.andrews]

@@sargemonday4801 Goid idea.

[@dcshoeman2k4]

I have a Tineco wet/dry vacuum mop and that fucker smells like ass if you don't remove it from the unit, hand clean it and let it air dry. I just ordered the MaxV Ultra last night for $1060 Black Friday deal on Amazon. I think I'll be ordering the dryer, too (although Amazon only has it listed from a scalper for $160.)

[@jamie.andrews]

Roborock does not sell their dryer module on Amazon and according to Roborock it is not their unit. I would be careful buying that one and wait for the official one on the Roborock website.

[@steve4195]

You can preorder on roborock’s site. It is estimated to ship out next Monday - 12/5. Not that big of a deal as long as that date doesn’t slip.

[@shopmanager6017]

This module is AUD 299 here in Australia (but $50 off for black friday). That is highway robbery.

[@jamie.andrews]

Wow that is more than double what it is here in the states!

[@Redemption808]

You can import it from China via AliExpress for 50€ (~$50), but yes it's robbery anyway

[@elielwfaber]

Anyone with poor connection of the plastic base ?

[@Murtagh7484]

Tbh I don't notice any smell so see no need to buy this extra... I bought multiple mop pads so change and wash them instead. About 20e for 8 of em.

[@mohsenunknown]

Call me old fashioned, but I rather have a regular S7 and rather change the mop daily. Seems to be more energy effecient as well to buy 8-10 mops than drying the same mop for 3 hours every day

[@jamie.andrews]

Several people are like you as I have heard this from many people. One thing you should also consider is for larger homes the S7 MaxV Ultra can go back every so often to have the water tank topped off and the pad washed. To me this is important plus it means the pad is completely wet when the job is initially started. On my S7 I have to prewet the mopping pad.

[@mohsenunknown]

@@jamie.andrews Yeah fair enough. My home's not that large and a full water tank of an S7 does the job. Thanks for the review!

[@jamie.andrews]

@@mohsenunknown Thanks for sharing!

[@quietdominator666]

Great add on. I honestly don’t think it’s worth the money though.

[@stephan24297]

I think robot mops vacuum combos still have a ways to go. I might consider just a vacuum especially since I’m afraid of mold and more maintenance since it has more parts than a vacuum only

[@jonathanpark7658]

I use a roborock. It is hands down the best vacuum/mopp I've used. Miles ahead of the ecovacs I used before. It's app is outstanding and many of the annoying issues simply don't exist with this thing. I haven't noticed any mold issues. I have large dogs always running through my house and this thing keeps my floors cleaner than I could have imagined. The amount of time it saves me, I used to spend 1-2 hours cleaning my floors, every day. Now I maintain the robot, probably around 30 minutes a week.

[@jessediaz918]

I tried using the irobot mop one but it doestnt do the job. I had the old SCOOBA from iRobot. That one was cool. BUt I have 3 dogs and the s7 with the dock works awesome!!!!

[@irap1269]

My floor plan is all hardwood floors and I have area rugs all over. This solution is perfect. It does a great job mopping the floors and vacuuming the rugs. With this dryer module, everything is not totally automated and the first time I have a complete solution. You can wait; obviously your choice but this robot is amazing in my scenario.

[@birdofpassage9875]

Do you hate the smell of feet? That is your answer of whether or not it is necessary.

[@jamie.andrews]

Lol never thought of it that way before.

[@anubizz3]

This why you don't buy 1st product of new innovations everyone make mistake roborock have the best solution but they forget to put this drying fan, even using cheap van to blow constant air will help drying process. Both ecovac lack the mop lift function, dreame forget to put water tank into the robot, but they smart enough tomake the base detachable so you don't need to bring the whole base to clean it. Not to mention they expensive as hell.

[@jamie.andrews]

The new L10s Ultra video will be out soon. Come back and tell me what you think.

[@shadow479]

Just get spare mops and dry the wet one by the window. Just how lazy and how much of a 1st world problem is this ?

[@jamie.andrews]

Lol I thought the same at first and still kinda do, but it is pretty nice to have them dried.

[@jessediaz918]

Agreed...but I got mine for $56 with shipping from China and Im glad I did get one

[@BoraHorzaGobuchul]

Makes perfect sense to use a device that doesn't require constant attention to replace the pad. After all, if you buy a robot like that, that means you ARE lazy as you don't want to mop the floors your own self.

[@shanew7361]

Poor engineering and piece of junk.

[@jamie.andrews]

Hey Shane, curious why you think it is poor engineering and junk? Can you elaborate some?

[@amrick4523]

are you fkin dumb? its clearly shown that its highly effective.

[@mhaustria]

great explanation! Thanks a lot!

[@jamie.andrews]

Thanks