How To Remove A STUCK Wheel! (5 Simple Methods)

Рет қаралды 158,422

Күн бұрын

Пікірлер: 59

@MechanicBase Жыл бұрын

Did you solve your issue with the stuck wheel? Let us know in the comments below how you did it, and maybe you can help someone else with a stuck wheel! Don't forget to like the video and subscribe to our channel! More stuck wheel information: mechanicbase.com/tires/how-to-remove-a-stuck-wheel/ Website: mechanicbase.com/

@TeaInTheMorning-we2kh 11 ай бұрын

I tried everything but the crowbar and nothing has worked. Going to buy a crowbar tomorrow Thank God this happened at my house instead of the side of the road

@lifeisfunsosmile Ай бұрын

No, I have 1 lug nut that won't budge at all as its rounded but very solid and won't turn even with a bolt extractor socket which has gripped it nicely but cant get it to budge still

@mitchellisaacs 10 ай бұрын

Thank you for this video- I’ve changed a lot of tyres on a lot of tyres but never had a stuck wheel until today. Prying it off worked for me.

@Kroidian Жыл бұрын

I used this video on the side of the road to change my tire and it helped!

@renee_wems 5 ай бұрын

I benefited from this video just now and to add to what I did that worked like magic 1. Greased the metal and bolt areas that my eyes could see of the wheel and leave for about 15mins 2. used my left hand to spin the tyre (with my finger in between the wheel spaces) continuously (tyres rotating) and I used force of the palm of my right hand to hit on the tyre at different spots. It yanked out at the 3rd force that landed on the tyre. God bless

@Magicnaners Жыл бұрын

That crowbar trick saved my life ty!!!

@timpauwels3734 9 ай бұрын

Thank you! The driving back and forth with loosened nuts trick worked for me. I live in a cool climate (salt on roads in winter) and right by the sea, so my wheels are always rusted on after a few months. This time it was particularly bad and hitting/kicking the wheel just wasn’t working.

@reijiheintz7175 Жыл бұрын

Omg. Your a life saver the wooden block and hammer worked perfectly. No other video offered that method. Thumbs up brother.❤

@MechanicBase Жыл бұрын

Glad it worked for you💪

@maxthompson1263 2 күн бұрын

Tried kicking the wheel as you suggested and I was a little hesitant because the scissor jack I was using was pretty sketchy but after around 25 kicks all around the wheel in different spots it finally popped off, thank you sir

@MechanicBase 14 сағат бұрын

Glad it was helpful💪💪

@ankuranand9585 18 күн бұрын

Use spare wheel to strike the rims of tyres ...it really helps ...I followed that today and it worked 😊

@joh9086 Жыл бұрын

Thank you so much for this video. I've changed flat tires before and never had one stuck like this morning. I really appreciate your video. It helped for sure.

@malcolmmcguinness2990 7 ай бұрын

Very good video. Clear, simple instructions. My wheel was very stuck on, so I used the hammer and wood method. It worked a treat

@MechanicBase 7 ай бұрын

🫡🫡

@brv2hr Жыл бұрын

You Sir are a legend! Worked with the prying method, the wheel was PROPERLY bound to the hub! I had already tried some of your methods with a rubber mallet and kicking and hitting. Finally the prying did the job!

@MechanicBase Жыл бұрын

Glad you found it helpful👍

@RickCharnas Жыл бұрын

Your video saved me a ton of trouble. Thank you!

@loislindsay9583 Жыл бұрын

This video has just saved me! Thank you!

@J_FARB 7 ай бұрын

We had moved to a desert area with lots of blowing sand. Got a flat and couldn't remove the wheel to change it Goggled it and you came right up! we tried all of the above including driving back and forth a bit BUT one hit with a BIG hammer on a 2x4 knocked it right off. Sure enough little bits of sand stuck it tight! Thanks for the help!! As a widow you were a real blessing to me!!

@J_FARB 7 ай бұрын

Just realized this is my son's account so that his profile picture!

@MiQi-0208 3 ай бұрын

This video helped me immensely. Thanks!❤

@MechanicBase 3 ай бұрын

Glad to hear that💪 Which method did you use?

@richmac918 Жыл бұрын

I don't remember this ever occurring in the old days when rims were generally made from steel rather than aluminium as they are today. I believe that it is more than just corrosion and that some sort of galvanic action is taking place between the dissimilar materials of the steel hub and the aluminium rim. I've run into this a few times now and some of these wheels were stuck so badly that I had to spray them repeatedly with WD-40 and after waiting a couple hours, lie on my back under the car and kick the tire off with both feet. Imagine getting a flat on the highway and having this happen. No way I'm crawling under a car on a scissor jack and doing this. Recommend you take your tires off and apply grease on the surfaces that contact each other as noted in the video.

@edwardashley6688 Жыл бұрын

Yes, older cars are lug centric, meaning the lug nuts centered the wheel on the axle. Modern cars are hub centric, and the close tolerances between the hub and wheel center hole are very susceptible to corrosion and/or rust. That’s my problem, a rusted hub and a steel wheel.

@richmac918 Жыл бұрын

@@edwardashley6688 That's a really good point that I hadn't even considered. You are absolutely right, the old style did rely on the lugs to center the wheel. Good thinking.

@ajhauter5049 11 ай бұрын

No, I'm currently working on a car with hub-centric steelies and the last wheel is stuck

@w0rd06 5 ай бұрын

My trucks steel wheels are stuck on. It’s like the lug nuts are still on. When my log nuts are off my wheel is more in place then some cars with lug nuts on. Like I’d feel safe driving it around my neighborhood without lug nuts.

@mecha37000fighter 10 ай бұрын

Thank you for the video

@janetclingan1259 Жыл бұрын

Thanks for your useful advice- after much effort success!

@cnimi 9 ай бұрын

It didn't take 15 minutes but 15 hours (I didn't have any serious pry bar or 8-lb hammer). The nuts have been torqued in a shop to something around 120 ft-lb, I figure. And yes, there's lots of salt on the road in the winter. I sprayed some KB 88 on the joint between the rim and the hub, let it seep in -nothing. Drove around a few hundred yards with the nuts 2 threads off, climbed some curbs -nothing. Sprayed some Knock'Er Loose and let it sit overnight with the nuts loose. Tightened the nuts and drove a couple miles to the store to get a 24" and a 36" pry bar. Took the nuts off, gave it a mild kick and the wheel came off. After 15h the KB 88 and Knock'Er Loose did their job and the wheel came off with a foot kick. My favorite is Aero Kroil but I don't have it at home and you cannot buy it in store in Canada. I cleaned a little the hub with a wire brush and I cleaned all the rust off the edge of the rim. I put some JetLube NIKAL antiseize on the hub and on the rim so this doesn't happen again. Will do it every time I put the rims on. Excellent video! I felt more important than the methods is you showing the viewers how you think about the problem, that's what helped me. Good teaching. Thank you !! 🙂

@illegaljuan5835 Жыл бұрын

Big ass spider 🕷️

@makeminefreedom 2 ай бұрын

Kicking the tire worked for me thank you.

@MechanicBase 2 ай бұрын

💪💪

@sofjanmustopoh7232 8 ай бұрын

I always use the loosen the lug nut half a turn and drive . Turn and brake . It pop it loose .

@adnanalyemeni7258 10 күн бұрын

Really good video. Thank you

@MechanicBase 14 сағат бұрын

🙏🙏

@adnanalyemeni7258 14 сағат бұрын

@@MechanicBase You said you have another video how to undo stuck wheel nuts , I looked into your channel I could not find the video, could you please add the link of that video ? Thank you again

@Will_i_am2248 3 ай бұрын

THANK YOU!

@davidpark9841 9 ай бұрын

You saved my life

@c0mputer 9 ай бұрын

My tire won’t come off. I’m currently on the side of the road after driving like 40km/h and swerving side the side. This is hilarious. Must go faster.

@jondoty Жыл бұрын

What kinds of grease are acceptable to use between wheel and hub to prevent this?

@Decado1978 10 ай бұрын

Copper grease

@martinkrauser4029 6 күн бұрын

@@Decado1978 copper grease not with some ABS systems. It's conductive and might be incompatible with the electrical system. check your car manual!

@Jason-tf4qw 6 ай бұрын

Worked

@tdunk1991 Жыл бұрын

i even wrapped ratchet straps around the wheel and anchored rstrap to another car and tried to pull the wheel off and still stuck

@anczerewicz1 9 ай бұрын

One thing you didn't mention is getting the lug nuts off. I no you mentioned covering it in another video but I mention it because it's critical in that you're not going to get to the place of even taking the tire off until you get past the lug nuts. Picture a woman by the side of the road who decides to try to change her flat Tire. She makes it to the point where she's able to take the lug nut wrench they gave her with the car but she doesn't have enough strength and there are five lug nuts. A good Patron pulls up behind her and he has another lug nut wrench but he also can't remove a single lug nut. Those lug nuts are on so tight it's unbelievable. Taking one lug nut off requires Herculean strength with the tools you're given. I come along with a hollow metal tube that's about 5 ft long and I place it around the little one foot lug nut wrench that came with the car thus giving myself a very long lever arm. Even with this it takes a little bit of effort but it worked. Then after this you run into the problem that you describe in this video. I would call the way most people's vehicles are equipped to handle emergencies a false sense of security. Why won't car manufacturers put on anti-seize Grease or a lubricant oil to prevent the tire from sticking after the lug nuts are off? If I were at a dealership and I asked about how to access the Jack and other tools needed for a flat tire and the sales rep gave me the comfort and security of here's how you access it and there it is. I would ask him to go ahead and take one of the tires off using that equipment. The average person on the side of a road who gets a flat tire and manages to take the lug nuts off is going to end up kicking the tire on each side until it unseizes and you can take it off. That's probably the first and simplest thing to try.