The Cheapest Way to Add A Grapple to Your Tractor

[@RockhillfarmYT]

Use code: Rockhill5 to get 5% off your order at www.agfolks.com Here is the precision manufacturing factory tour kzbin.info/www/bejne/hoOVmHp6l79oldE Here is the precision manufacturing 3rd function diverter install video kzbin.info/www/bejne/opPFcneCa7Gin9U Here is the install video for the add-a-grapple kzbin.info/www/bejne/pH-0eKp-idl4bs0

[@ronrandolph4733]

i've had a add a grapple for about 16-18 yrs. it's as valuable to me as my front end loader is to my tractor. i used it to clear my property. i cleared it with a chainsaw, a massey 1240 and an add a grapple. it made it so easy to move brush.

[@RockhillfarmYT]

Thanks for sharing

[@HamiltonvilleFarm]

Definitely something worth considering. Looks versatile

[@RockhillfarmYT]

Yes sir

[@marvindiamonjr.9631]

I've got a grapple already, but I would definitely consider purchasing one of these. The grapple I have is handy as all get out, but having one on a traditional bucket would work for a whole different set of chores. Especially for those times where you might worry about something poking through the grill. I would never get rid of my root grapple, but this could add some handy features for a reasonable price. Thanks for sharing this!

[@RockhillfarmYT]

Well said. Thanks for watching

[@starwarriorfarms5148]

I agree with you. I think this would be good for stuff like rocks, but for brush and logs, I like the root grapple. I picked up a 74" grapple at about the same price point as the double, new at auction.

[@RockhillfarmYT]

I’ve been really surprised how well it works on brush. Total capacity is lower than some other Grapples though Thanks for watching

[@alittleofthisandalittleofthat]

You showed us many variables on what it can do. Great content. 👍

[@RockhillfarmYT]

Thank you

[@carlapplebaum3014]

I put the smallest size one on my Kubota BX25D last summer, and I have been really pleased. Installing a Summit 3rd function was a little complicated, but not awful. Installing the AddAGrapple itself was easy. I have a Piranha tooth bar on the bucket all the time, and the grapple works nicely with it. I did remove it once, and it's not hard. Putting it back on was a little fiddley, but not difficult. I spray a little lithium grease on the wear points from time to time, and I don't see any wear. I use it hard, and have flexed it when picking up irregular snags, but it has not bent permanently. With the bucket on, you can't see the pickup as well as with a full grapple, but that's only a minor annoyance. The grapple actually helps with loads of dirt-- I can use it to help loosen a compacted pile, and it helps in not losing dirt when you bounce on a rough surface. Altogether, it's a great tool.

[@RockhillfarmYT]

Thanks for sharing your feedback on it. Everything you said sounds about right

[@TonysTractorAdventure]

This is a handy add-on. I may need to get one.

[@RockhillfarmYT]

Yeah, a nice simple solution from precision. Saves on switching between a bucket and a grapple as often

[@jaytee66]

I have been using mine for three years and love it

[@RockhillfarmYT]

Thanks for sharing

[@khtractors]

This is the style grapple I’ve been wanting for my tractor. I’ve been thinking of building one but I might check into this company on buying one vs building it. I really like the design!

[@RockhillfarmYT]

I think I’m going to like using this and not switching loader attachments as often. They have a double wide version for bigger tractors Thanks for watching

[@doct0rnic]

This is how most farm tractors are in ND, I want to go this route as well

[@rodneyscrivner2504]

Good demonstration of what seems to be a great product Brock.

[@RockhillfarmYT]

Thanks

[@k.e.k.2790]

Very nice video. I may have misunderstood u, did you say they had a fork attachment? Or that they had a grapple gor a fork attachment?

[@davidlinux]

I have a double Artillian grapple now but this on the bucket would be so over the top convenient.

[@richardjacques6370]

Nice addition to your favourite bucket.

[@RockhillfarmYT]

The grapple should definitely come in handy. I want to get a tooth Bar for this bucket so I can do a better comparison with the wicked tooth Bar

[@timsawyer7443]

Wow - an Add-a-Grapple AND a tooth bar - talk about a “pimped-out” bucket - lol! I look forward to seeing that video (but then again, I look forward to seeing ALL of your videos!). Great video here, as always!

[@RockhillfarmYT]

Thank you sir

[@MyClutteredGarage]

Even though I have a grapple, this looks like it would be handy addition to the bucket. I like it!

[@RockhillfarmYT]

I think it will be handy and it’s half the cost of a standard Grapple Thanks for watching

[@a807511]

As much as I want a grapple. I was most excited about the square body in the background lol.

[@ffc3476]

Thanks for sharing Nice add on Be well be safe

[@RockhillfarmYT]

Thanks for watching

[@danielchambers1958]

I have a Green Machine grapple with a BX expanded tooth bar. I did a review on my channel. I enjoy not having to change implements…..

[@georgea6403]

Damn. I need one. But I gotta get the front and rear remotes for my Chinesium Jinma. I know I watched many videos on different ones including yours. Gotta decide which one to get. What would be your choice? Thanks

[@markd2858]

Good video, looks like a versatile option, I might get one of those.

[@RockhillfarmYT]

Thanks for watching

[@bigsway4414]

That grapple is a million times better than no grapple at all. I built one very similar years ago and did a lot of work with it. I built a newer version a couple years ago. It weighs around 115 pounds and it never comes off my bucket. That video really makes me want a tractor with a self-leveling loader. You have an awesome set up with all that ballast weight and self-leveling loader and your many many attachments. I’m very jealous of you and your college basketball supremacy…

[@RockhillfarmYT]

What kind of tractor do you have

[@bigsway4414]

I put 600 hours on a 3032E I bought new in 2011 and sold it. I regret selling it. I paid $16 145 for it brand new. I now have a 2020 3038E that cost almost twice that. I do like it though.

[@RockhillfarmYT]

Nice tractor. If you were serious about living nearby and having homemade attachments you wanna show off we should make it happen.

[@bigsway4414]

I don’t think it would be worth your time to drive to my house just to see the dozen or so implements and modifications I have made to my tractor. I probably live further from you than I actually realize also. I’m 20 miles south of Coffeyville down Highway 169. If you were coming this way for something else it might be worth your time to stop and look at some of my stuff. Most of it is nothing special but I have done a couple of things that are kind of neat. One original implement that I’ve never seen anything like it. And some other modifications that might be unique as well.…

[@007briles]

Nice Option!

[@RockhillfarmYT]

Thanks

[@smileyking1019]

Looks good Also noticed you can use it like a broom and dustpan sort of .Scoop the last lil bit into the bucket 👍

[@RockhillfarmYT]

Yes sir

[@BigDaddyAddyMS]

I’m on the fence between this or the pallet grapple.. Do you think you’d like this or the pallet grapple better?

[@lawnman1734]

Is a 3rd function controller required?

[@rologist]

Any suggestions for an 89" backhoe bucket?

[@jennifer.moxhamhuroncenten1666]

Hey Brock, this is an old video, but I am interested in this grapple. You said you have the small add a grapple, I have a first gen 2032r with a 61” bucket. Will this fit?

[@jennifer.moxhamhuroncenten1666]

Sorry, I should have also asked if you thought the mini or single version would be better?

[@RockhillfarmYT]

I don’t remember which one I have but the one I have should fit yours. My bucket is 57 inches and there is a lot of adjustment on the top slider I would still recommend this product to anyone. I just don’t have that memory for details. Whatever I said in the video should be accurate.

[@Tdale85]

Really neat product. Please do a review in a few months on the durability. It is priced right as well. (Around $1K). However, shipping is the kicker. Almost $400 to ship it to the northeast. My guess that is inflated due to the current economic conditions. I’d love to get one, but with the shipping being 1/3 of the price, it’s a no go for now. Again, thank you for reviewing, I’ll keep it on my radar for the next several months.

[@RockhillfarmYT]

I will definitely do a follow up video on it as I continue to use it. I think the trick on the shipping might be to order it through your local dealership. I’m not 100% sure on that though

[@jimmcknight3021]

Check out their website for dealers. My local Kubota dealer is an authorized dealer for precision mfg. Plus a dealer can help on sizing and install on hoses. Some of their products don't come with hoses. I don't have time or experience to do that for our adjustable add a grapple for forks that we are buying with our new tractor.

[@RockhillfarmYT]

My local Deere dealer can also sell these

[@jimmcknight3021]

@@RockhillfarmYT Yes they have a nice network given the size of the company. They have a good reputation from what I have seen and heard. Looking forward to using ours in the next few weeks.

[@mkc0005]

Certainly makes me rethink my grapple options. I want a double which adds a considerable amount to the price but still cheaper than options I've been looking at.

[@RockhillfarmYT]

Mine is the small version, because my understanding is my bucket isn’t wide enough for the double Definitely good to have an option in the lower price point. I think even adding their diverter valve it’s still going to be cheaper than the mechanical Grapples

[@kdegraa]

Yes it’s kind of like a 4 in 1 bucket but is better at handling logs & brush than a 4 in 1 bucket. The Add a Grapple is an impressive product. I can’t get one for two reasons. Firstly I’m in Australia. Secondly my tractor has a 4 in 1 bucket.

[@RockhillfarmYT]

Thanks for sharing your thoughts on it

[@jimclark576]

Great review! I want one.

[@RockhillfarmYT]

Pretty handy. Tomorrow I’m installing there a third function diverter on a friends tractor

[@johnsmith-xr6qy]

Thank you for the demo. Thank the factory for the honest up front info. I Have a "stack rake" bottom half of a grapple you might say and have wanted to add the top 1/2 for a long time. Now I think I can. I am grateful for the video because I was thinking of making my own and I know from past exp this is not easy to do. I'd rather buy, bolt on and go to work. Looking forward to this! Thanks again.

[@RockhillfarmYT]

It is an American made product at a reasonable price. If you don’t already have third function hydraulics they also have an affordable kit to easily add the extra hydraulic function Thanks for watching

[@frankdrahos8569]

That’s a nice looking accessory. I have a set of pallet forks on order from EA. I may be in the market for the fork version of this grapple.

[@RockhillfarmYT]

They had a grapples are definitely a good affordable option. Congrats on the pallet forks. You can do a lot with those

[@cashxx]

Was going to get the the fork version but 12 weeks out. Needed something sooner.

[@RockhillfarmYT]

Yeah, wait times are frustrating. It seems like most companies have a long wait like that right now. Thanks for watching

[@andrewanderson1436]

Definitely be useful for sure

[@RockhillfarmYT]

Yes sir

[@madtater5948]

thanks for sharing the video is there grease zirts on the pivot points ?

[@RockhillfarmYT]

It does not have grease zerks

[@mittenequipment2443]

Very cool! I was surprised that you mounted it on your factory bucket over the EA. My local dealer have a used one for sale that looked very heavy. What does that setup weigh?

[@RockhillfarmYT]

It weighs 150 pounds

[@rufinovillarreal8088]

How. You conet the. Hoses you have. Any video

[@sharpshorts]

Thinking it would be great on a skid loader bucket or backhoe/loader bucket as well.

[@RockhillfarmYT]

They do make larger versions for bigger buckets. Thanks for watching

[@T_Humphries]

Looks like it would be pretty handy

[@RockhillfarmYT]

Yes sir

[@watkinstreefarm6880]

That is pretty slick Brock!! How much does their hydraulic diverter run??

[@RockhillfarmYT]

The diverter to add third function is $500 That’s still not cheap but it’s the least expensive thing I have found. Same with the Add a Grapple. It’s still not cheap but it’s cheaper than any other option on the market

[@rickvanskike669]

That is a great add-on for when you don't need a dedicated grapple. What is the MSRP?

[@RockhillfarmYT]

$995. A year ago it was $700 but Everything is seeing crazy inflation

[@JC_Young]

Handy as a shirt on a pocket.

[@kipcudd7253]

Do they offer a short toothbars to bolt on to the side edges of the bucket so it would grip better on bigger diameter logs?

[@RockhillfarmYT]

I don’t think so but that’s a great idea

[@FabbedFun]

Yep. I like it. Good install, good demo, good video. Not great on rocks and stones but awesome on brush and debris. Very cool. Now I'm doubting my designs lol.

[@RockhillfarmYT]

Hi thanks. I think this is a great product. In terms of your own design, if it was easy everybody would do it

[@ProjectsWithPaul]

Nice looking square body Chevy in the background. Is that yours? That grapple would suit me just fine. Thanks for the review.

[@RockhillfarmYT]

Not mine. It belongs to a young kid who works for me and he’s always tinkering with an older truck That one has a really nice sound to it.

[@vinsonhelton7141]

Wow! That is perfect for most jobs a regular homeowner would need, especially if you own 10 or 20 acres with some trees. Being able to use the bucket makes this product a better choice in a number of situations. Do you know if they have one that works with the 1025r?

[@RockhillfarmYT]

I agree. Yes they have one for the 1025. There are four sizes total. I have the small but they also make a mini On their website it explains how to measure your bucket to know which one you need

[@vinsonhelton7141]

You need the Rockhill10 so I can get 10% off. Lol just kidding

[@jeanpomerleau8416]

when you were picking up your second bucket load of logs, I seen a ghost walking in your driveway. :)

[@RockhillfarmYT]

Good eye. Kind of creepy the way she faded out of sight. I actually stopped the tractor and talked to her and then resumed the clip from there

[@jeanpomerleau8416]

@@RockhillfarmYT did not know if you did it as an easter egg or not :)

[@RockhillfarmYT]

I didn’t do it on purpose but I noticed it While I was editing and wondered if anyone would see it

[@jimthode]

At 1:17 Missed the part about 3rd function hydraulics at the end.

[@RockhillfarmYT]

I forgot to mention it at the end of this video but I did make a second video demonstrating how to install the third function kit from this same company Here is that video An Easy Way to add 3rd Function Hydraulics to Your Tractor kzbin.info/www/bejne/opPFcneCa7Gin9U

[@markvogler1832]

This is kind of funny. Years ago, that used to be the only kind of grapple that you ever saw...then marketing took over and everyone started manufacturing dedicated grapples that aren't good for anything except grapple use. Now everyone thinks this is a new, novel idea. Good to see history repeating itself. LOL. I never have and never would spend the money for a dedicated grapple....the grapple on the loader bucket is much more versatile and you don't have to waste time switching implements. If you want to make it even more effective, bolt a few teeth to the bottom of the bucket for better grip on everything.

[@coopernickerson7470]

Will it work on bobcat 2025 tractor?

[@RockhillfarmYT]

Yes

[@linnjensen7469]

Where do you purchase from and how much was it

[@RockhillfarmYT]

As I mentioned at the end of the video, you can order it from agfolks.com Code ROCKHILL5. Will get you 5% off You can also order it through your local tractor dealership Thanks for watching

[@nickdial8528]

Did I miss the part where you addressed if you don't have a third function?

[@RockhillfarmYT]

I’ve done two different videos about inexpensive ways to add third function. Reasonably inexpensive… An Easy Way to add 3rd Function Hydraulics to Your Tractor kzbin.info/www/bejne/opPFcneCa7Gin9U

[@nickdial8528]

@@RockhillfarmYT Thanks

[@rexhavoc2982]

You have a gost at 6;06 walking by and vanishing. Why not turn the cylinder 180 and have the ports face the quick connect? shorter hoses.

[@RockhillfarmYT]

My 3rd function hydraulic ports are centered on my loader, not on the side Thanks for watching

[@raymondmcdonald7085]

I like the simplicity of the design. Sure a dedicated grapple might be more effective but the fact you can still use your dirt bucket simultaneously is a win. Thanks for the demo. Also, where did you get the metal shed that looks like a quonset hut?

[@RockhillfarmYT]

I got the Quonset hut from Legacy steel buildings and I ordered it at a farm show I have a whole series of videos on the build and what goes into it We are standing up the last arch today and then I’ll be starting on the end walls

[@thegreatnorthwoodswithbb2863]

I was checking into the add a grapple more expensive than a Land pride root rake grapple I've purchased ..

[@RockhillfarmYT]

You paid less than $1000 for a grapple?

[@thegreatnorthwoodswithbb2863]

@@RockhillfarmYT no actually i paid $2200 for it.. but when I got online all of the add a grapples were $2300 Plus.. that's why I made my comment

[@RockhillfarmYT]

The one I have is $995

[@thegreatnorthwoodswithbb2863]

@@RockhillfarmYT I will have to research harder I guess

[@thegreatnorthwoodswithbb2863]

@@RockhillfarmYT thanks

[@brents1643]

You didn't have to remove the bucket to do install?

[@RockhillfarmYT]

No, I did not have to remove the bucket

[@brents1643]

Cool

[@robclinton9249]

I would think about putting bolts in the other direction. Bolt head inside so threads don't get buggered up?

[@RockhillfarmYT]

Thanks for the suggestion. Might be handy

[@mkc0005]

Also less sticking inside the bucket for something to snag on.

[@sheltongroup5922]

Does that work on a bobcat?

[@RockhillfarmYT]

I think it should work on anything with a bucket. They have much larger versions if you mean a bobcat skid loader. I didn’t specifically ask about the Add a Grapples on a skidloader but they do make grapples for skid loader’s He showed me their largest Grapple they make which has a 74 inch opening and weighs 1400 pounds

[@billfenner7084]

Just remember that you have a set of teeth that are sticking out of the top of your bucket. Don't stick it threw your new building.

[@RockhillfarmYT]

Good Point

[@billfenner7084]

That thing would RIP a hole like a beer can.

[@tooge47]

you assume I already have a bucket !!!!

[@RockhillfarmYT]

There is that.

[@davidlinux]

Brock, I went to their website but there does not seem to be a way to order. I even did a search for a dealer within 200 miles of my home location and still nothing. Are you aware of a way to order and apply your code? Keep up the great work.

[@RockhillfarmYT]

agfolks.com

[@RockhillfarmYT]

All of their products are sold through agfolks.com

[@davidlinux]

Shipping was almost $500.00. Think I will pass. Sorry to bug you.

[@RockhillfarmYT]

Hmm. Didn’t know that

[@davidlinux]

I think it’s because the delivery is to a residential location. I am going to ask my Deere dealership in the morning to see if they will accept delivery. Let’s see what the shipping is to their location. This grapple would be a very cool addition to the bucket. For the “heavy lifting” I have my Artillian. Thanks again for everything.

[@cedarlaneenterprises6258]

It doesn’t really work well with an older style bucket on an older machine, for buckets angled like that one it’s fine , for anything else not so much .

[@thom71]

Where is your basketball net?

[@RockhillfarmYT]

Interesting question. All of the rainwater from our downspouts ends up in that spot and it’s taken a while for the ground to dry and pack around that sono tube I really needed to do a better job of packing in the dirt in layers when I refilled that hole. I’m thinking I should probably cover that in another video because you could run into a problem, if you repeated what I did If I had put the basketball goal up when I was originally planning to, i’m not sure if it would’ve held it. I think it could have leaned under the weight

[@rjensen6368]

I've been looking to add a grapple to my pin style bucket on my Mahindra. I called the dealer they told me around 5K to do it. This gives me an option. No to see how to add the 3rd function, since I only have a duel function.

[@RockhillfarmYT]

They have an add a valve kit for $500. You can easily install it yourself This cost a little under $1000 for the Add a Grapple I’m going to say most of that $5000 was labor cost for something you could probably easily do yourself

[@RockhillfarmYT]

Here is my factory tour video that I did with the owner of the company. Towards the end of the video he in boxes and demonstrates the third function kit Precision Manufacturing - Factory Tour kzbin.info/www/bejne/hoOVmHp6l79oldE I personally used a similar kit from a different company and I have a full install video showing how I did it

[@peterkoster5053]

I see you dented your cab

[@RockhillfarmYT]

I did. You are the first to notice. When I was digging out around that root cellar it got caught on the guttering. I didn’t think I had done any damage until a few days later when I noticed it After this video I bent it back up but you can still see where it is a little messed up

[@peterkoster5053]

@Rockhill farm happens to the best of us, you live and you learn, could have been worse I guess.

[@RockhillfarmYT]

Yes sir

[@jtbro7644]

There is no cheap grapple. And if you don't have 3rd function valve. There are another exspence. I bought the bolt on top.

[@RockhillfarmYT]

Definitely no cheap option but when other options are 4000 and you can do it for 2000 then that is the cheapest. 2000 is still a lot The video I released today demonstrates putting a third function diverter on

[@randalb5947]

For $100 more i can just buy a grapple

[@RockhillfarmYT]

This is $1000. The average price of a grapple is $3000.

[@michaelmclovin5098]

Their website is terrible, they have no pricing and you have to go through a dealer, so there's really no advantage of going with them than John Deere.

[@davidlinux]

Check out the new Artillian fist grapple - very cool redesign. kzbin.info/www/bejne/iGqzo3elrr9-apY

[@RockhillfarmYT]

Yeah, I’ve had it for a while but They wanted Tim to release the video first

[@davidlinux]

Figured that you had it. I still like my “old” grapple that I bought in December. I just added the tooth to both grapples. Haven’t used it with those on it but I think it will do the trick for me. Keep up the great work.

[@RockhillfarmYT]

Those teeth look like a handy addition. Haven’t tried them myself though