Glad to see you've pointed out what many fail to realize when loading a trailer to capacity. If you load a 10,000 pound GVW trailer to 11,000 pounds with a 10% tongue weight, you are still under the GVW of the trailer since 1,100 pounds is being shifted to the tow vehicle.

ya it was 50K when he bought it 3 years ago can't get them that low now

My Ram 2500 Power Wagon failed at 28,000 miles faulty transmission

My 2018 transmission died on my Ram 2500 power wagon after 28,000 miles and never towed with the truck. A year past warranty my local dealer said $12,000 to replace transmission with same faulty transmission. 🙃🥴 working with Ram customer service going on 4 months with a truck that can’t drive battery died waiting on transmission I ordered at the dealership. What a nightmare only paid $56,000 when Trump was in office in 2018 so didn’t pay Biden prices. 😅 total fuckery 🥴😑

Two extra magazines for your pistol.

Enjoyed this episode !

sorry, viewers are dumb sometimes. the island is just a bunch of work for what? It'd be a much nicer view without the island and bridges.

Yakking stops at 7:40, then action begins. FYI.

I don't think that you need to buy any rirfh rath rocks

Beautiful pond shot!

You need a dump trailer to haul the rock to the work site..

Nicely done! Sorry if I missed it but what's the significance of cut height above face cut? (You mention 3") Is it to give the tree something to "push off of" when falling? Stopping it springing backwards?

duct tape

You need to get a telehandler with a bucket to place the rocks

Why does that saw sound like it has a miss when it’s somewhat under load. It seems to clear up when it’s fully loaded but it was kinda making me wonder.

Maybe you should talk to Brandon at elite earthworks maybe he could give you some ideas.

Brock, use the smaller roks as well they could be wheel barrowed out and dropped in and they work better than the bigger ones. The bigger ones would be used where you really big waves, which you don’tin your pond.

you need to find you a rock crusher, then you could use and sell crushed stone.

If you only had a rock crusher.......

Hello Brock. The mini-ex, with the ripper and thumb, did a great job of picking stones. You mentioned that the rocks are sandstone. Scupltors might be interested in buying rocks for projects. Sandstone can be shaped so the rocks could be used for a stone house. If you had a small barge, could you load a few rocks, float to the island, and then roll rocks over the side? Good luck with the island project. Jim

People pay good money for rock like that down south here! Definitely a improvement than before.

Howdy Brock! Really like the idea of using the materials you have on the property. I think I was on team 'use your own rocks' when the subject came up before. Placing the rocks wasn't something I had considered though lol. But sounds like you have an idea how to get it done. Also think you won't regret building a trail or road to get easier access to the rest of the property. Well done and thanks for sharing 🤠 PS: Carson - ya need to paint some eyes on the ripper so it looks like a T-rex lol

Morning

Get you a rock crusher 🤯 now I need a rock hill. Man the list is getting big for my dream property 🤣.

Hehehe

Great video. Angles he uses? Not wearing safety glasses kind of freaks me out.

Brock, the Lane Shark works great. I don’t blame you for not wanting to go any further on that narrow strip. Oh by the way you are far from being an idiot. Enjoyable video Brock. Thanks

I love my 2013 Bobcat T770 (pre DEF). My one and only complaint is the lack of a roll up door. As a single operator many times I need to open the door with the arms partially praised. This is not possible with a Bobcat. Also, sometimes when grading with a bucket I need the visibility and it’s a real pain to take the door off and put it back on.

That thing looks heavy duty

All you had to do, was put your chain around the roots at the end, after you had it ripped lose. That would have twisted it, or flipped it up, and done.

That back hoe looks weak.

Maaate, buy 'playground sand' - used for kids sand pits, it has the silica removed and is only about $7 for 25lbs. Works just as good as proper media. It's possible to sweep up the sand and muck off the floor, sift and 'winnow' it then re-use it. Get a hand held spray bottle, either a new one or an empty bathroom/floor cleaner bottle, and fill it with plain household vinegar. Spray (a lot) the job with vinegar every night for about a week beforehand. The rust and muck will come off in a quarter of the time. Learnt all these things over years of restoration work and making neighbours insane.

Appreciate the experienced reviewer. Where do you get the metal cage you’re tossing the split wood into?

BUT, if you can use two machines at a time, you can do more in less total time. Every job is different and time is still money. Yeah, I don't like the front entry. often the implement is in the way of entry or exit. You should get one of these delivered & use on the farm. what you see!!

You should have gotten more. Doyle scale you should have gotten over run. Not just 90% of what you bought that tells me the logs were scaled wrong. Suppose to be scaled inside bark to inside bark. But he put the stick on the outside of the bark That fella scaling the logs needs a new teacher

nice looking tractor

Esta Poncho or extra coat

China saws are junk, The End....threw mine in the scrap pile.....plastic quality was a JOKE, I would never put my life behind that garbage ever again!! They do a nice job making them look nice and shiny, you've been warned, the plastics are paper thin, so is the metal.....and Kick-back safeties are not Reliable and inferior junk plastic quality. If you don't have money, you're better off with an Echo or even a shitty Poulan from wal-mart, at least they are Safe!!

Blanket

Bigger saws are SAFER too!!!! The saw is super Heavy, the bar is Long.....in the event of kick-back, the Saw is going Over your head or shoulder at the Worst!(assuming you're running a 28"+ Bar).......and kick is Much slower too....The only thing to be aware with Power saws is chains Jamming, if the chain catches a nail or jammed in wood, the Body of the saw Jolt back at you....people actually DO get broken ribs from that....I had a few close calls myself....which is why I generally keep the Body of the saw away from me, and stand off to the side when cutting super large Logs. Smaller saws are more dangerous, the bars are just Too fast to react, and they Flip right back into your chest or head.

Not sure it would have helped here, however many times I have used self tapping 1/4" or 5/16" screws to make the holes, pending how hard the metal is. As apposed to drill bits

Your comment on the first mini skid steer needs some more research. Look into the JLG Little John.

Between the legs is a great position. Turn it on a 45 with the cord up and pull against your thigh.

Great video thanks for going through both

Me personally I buy the older ones with running issues. I like to get em not running. When I do that, I save a ton of $$ and use the extra funds to get a nice rebuild set. That way I'm getting basically a 0 hour saw with better internals than a brand new one. I usually get them anywhere from free or 20 bucks up to around 100. I spend around 80 to 150 on good brand new internals. So for a damn good saw that feels like 0 hours I'm only about 200 in. Where I live is a big tree worker area and my reputation for rebuilds is getting to the point where my boss is getting just as many calls looking for his engine builder than he is for tree work. Ive been a mechanic for decades and this year switched to trees. It's been really fun. The tree community is really awesome.

cool shirt

goood Tips, thanks

Hey from 🇨🇦. In USA if you purchased a used one would they provide a parts source ? Or would they sell direct to end user as they have hardly any footprint in n America ?

I first bought an expensive Dolmar saw, cost me nearly $1000. I subsequently bought two $60 chinese saws, one has a recoil starter which makes it easier to start. I guess sixteen cheap chinese saws will last far longer than the expensive $1000 Dolmar. So if a cheap chinese saw gives a problem, just pick up a new one and continue. Aso, they are a lot lighter, and less tiring to use. .

Almost made me cry! Some of the pieces you were going to turn it firewood a woodturner would love to get their hands on.