Rode Wireless GO Disassembly Battery Replacement - RX MODULE

[@ankity1234]

Thank you

[@oniyaki]

You are welcome! Don't forget to like and subscribe if it was helpful. Thank you!

[@crisprodu]

In my case, I need to repair the display, but I can't find a replacement

[@oniyaki]

Hi Cris! What's wrong with your lcd? It's cristals broken or is just the flat cable? In first case i suggest you to find some "not working" TX, so you can harvest the monitor...In the second case, you can repair the flat cable solering some wires. Don't forget to like and subscribe if it was helpful! Let me know if you fix it!

[@crisprodu]

@@oniyaki unfortunately the glass is broken, I'll try to find a not working TX

[@oniyaki]

@@crisprodu i think is the best and actually only way to fix it without spend too much

[@khakiichunk]

Hi! do you know if this is the same process for the wireless go 2?

[@oniyaki]

Hi! I'm planning to do it on wireless go 2! Don't forget to like and subscribe to be update when the video is ready!

[@deepexperience2855]

I am also looking forward to the video for the GO 2 because I’m in the same position. You make it look so easy but I know it is not easy at all.

[@oniyaki]

Here you see it in more detail (kzbin.info/www/bejne/mp68ZJd5o9yCgbs) this is the Version 2 of the Rode Wireless GO

[@josueruizzz7730]

Nice video! I got a problem with the turn on button. The little gray square is broken. Do you know if that could have a solution? Thank you so much!🔥🙏🏽

[@oniyaki]

Hi! Probably you need to open it and resolder one o two point where button is connected to the motherboard. Or, maybe the semi-sphere which do the "click" and close the circuit need to be replaced. I bet is one of this 2 cases, and you will solve it. Don't forget to like and subscribe if it was helpful! Thank you!

[@danielsaaiman]

Thanks for the video. How many years do these batteries usually last?

[@oniyaki]

You are welcome! It depends how much do you use the device. In medium use, i think something like 3 years. Don't forget to like and subscribe if it was helpful! Have a nice day!

[@ZikirdanDoa718]

Can you please make a video for godox movelink m2 battery replacement

[@oniyaki]

Hi! Actually i don't have it, but if someone need to replace the battery, i will do a video on how to do it! Don't forget to like and subscribe to be updated on new video incoming!

[@BAIJUSBLOG]

Can you help me plz. I have a rode wireless go. Receiver working properly. Mic have charging issue. If a charging not getting charge on my mic. If i send u can clear it . Iam from india .

[@oniyaki]

Hi, i'm actually in Italy

[@bobbyvasquez8748]

Hi, I want to know if I can replace de usb c conector in de rode go II

[@oniyaki]

Hi! of course you can! i'm gonna make a video on it soon! don't forget to like and subscribe to be update when new video is ready!

[@RUSSIANFASHIONDIGEST]

good video! tell me please where I can buy this battery to replacement in RX? thank you

[@oniyaki]

Thank you! unfortunately, at the moment original battery replacement can't be found, but you can use the battery of Apple Watch series 3 42mm ( ebay.us/t2cuNG ) it have more juice and fit very well inside the case. You need to swap the bms ( charger circuit ) from the original to the new one. I hope it was helpful! let me know if you fixed it!

[@RUSSIANFASHIONDIGEST]

@@oniyaki thank you very much for help! )

[@oniyaki]

@@RUSSIANFASHIONDIGEST You are welcome! don't forget to like and subscribe if it was helpful!

[@RUSSIANFASHIONDIGEST]

@@oniyaki Hello, tell me please, Apple watch 3 battery have the same 3 contacts as Rode?

[@oniyaki]

@@RUSSIANFASHIONDIGEST hi! You need to transplant ( using an iron to solder ) the bms from old rode battery to the apple watch s3 battery, then you have same 3 wire to solder in the motherboard...very easy to do. Let me know if you fixed it!

[@rhalfik]

What are the chips on this thing?

[@oniyaki]

What chip do you mean?

[@oniyaki]

Here you see it in more detail (kzbin.info/www/bejne/mp68ZJd5o9yCgbs) this is the Version 2 of the Rode Wireless GO

[@kornelijekovac9793]

No screws? Funk it... I've stopped buying products without screws.

[@oniyaki]

Ye, i know what you mean! don't forget to like and subscribe if it was helpful! Thank you!