Thanks Joel, for this classic video, ha! I am about to get three of the Rogue 2.0 Bars to replace three of the 2014 version Castro Bars. The Castro Bars have always performed flawlessly. The issue is my gym is half garage and half outdoor so the rust buildup on the Castro bars is beyond annoying. Yes, I brush them down with a steel bristle brush and coat them with 3-in-1 Oil, but the upkeep simply isn't worth it if I could go without.
@jk36396 жыл бұрын
Great reviews bro. It seems like rogue just makes a minor change to the Ohio bar and calls it something else. The shaft steel is the same on all the current ones.
@steventhunander94478 жыл бұрын
For old Rogue bars that do not spin... Get a tube of lithium grease, steel wool, a lint free cloth or shop towels, robust needle-nosed pliers, and sand paper. Pull the sleeves off and clean up the contact points (use the steel wool then the sand paper, then wipe them). Also clean the exposed bushing. Then put lithium grease on the bushings and the contact points on the bar. Then reassemble the bar. The bar should spin like new.
@danieldotter60773 жыл бұрын
Just got myself the Rogue Castro Bar 2.0. Far as I know it's just the Ohio bar in bare steel. I prefer the feel and even the look of bare steel and have no worries about occasional maintenance.
@707SonomaComa4 жыл бұрын
What is the difference between those bronze bushings or composite bushings on the 2.0 bar? Is there more wear & tear or slop in the sleeves?
@biknjak Жыл бұрын
I've got an e-coat Ohio bar that I bought a year and a half ago. Granted, it's "babied" because I work out in a carpeted, finished basement, but it's just as "purdy" as the day I got it. Love it!!
@manpreetgarcha20396 жыл бұрын
Best deadlifting, benching, squatting barbell??
@hillbillybarbell15368 жыл бұрын
nice review. does the knurl on echo come in close in to grab to deadlift with?
@AGC8286 жыл бұрын
Odd the Echo bar only has a year warrantee. Was considering it. Now it's either the 2.o or OHIO Power bar. Like having the added insurance of a lifetime warranty
@arm6186 жыл бұрын
I’ve seen several rogue bar 1.0. bending but that’s from people rack pulling with them. Any bar will bend if you rack pull with them.
@AMRAP6 жыл бұрын
arm618 yeah that's going to bend anything.
@henry1099478 жыл бұрын
How's the echo bar holding up?
@AMRAP8 жыл бұрын
Sold it a couple months ago, the finish was still plentiful but dull, spin was excellent.
@henry1099478 жыл бұрын
+As Many Reviews As Possible so you would still recommend it over the rogue 2.0 and Ohio?
@AMRAP8 жыл бұрын
+henry109947 yeah if you're on a budget it's perfect.
@henry1099478 жыл бұрын
+As Many Reviews As Possible ok thank you
@AMRAP8 жыл бұрын
+henry109947 I just caught word that the Lynx barbell hybrid bearing bar is on sale for $199, that's excellent for that barbell and I'd go that route.
@Mark-te8ky4 жыл бұрын
Is there a way to fix or prevent the scratches on the bars?
@thetravelist65848 жыл бұрын
Hi which would you recommend a rogue ohio bar or american barbell training bar i am split with these two bars i will be using it for crossfit workouts. Thanks
@AMRAP8 жыл бұрын
Jiwell Labuguen American Barbell training bar. 28mm, better whip, better warranty.
@thetravelist65848 жыл бұрын
As Many Reviews As Possible thank you so much f0r the great advice 👍🏼
@hillbillybarbell15368 жыл бұрын
and would you still reccomend echo bar if your on a budget?
@AMRAP8 жыл бұрын
Yes definitely
@hillbillybarbell15368 жыл бұрын
+As Many Reviews As Possible thank you.
@StonedRambo017 жыл бұрын
Good video! What's the best all around bar for bench press, squat, dead lift etc... in a hot and cold garage gym?? One that won't rust
@AMRAP7 жыл бұрын
If you're looking for something to withstand the weather and rust test, I would go with a stainless steel bar. Rogue just released their Ohio bar in SS but American Barbell also has their Precision Bar. For what you're doing, you could just go with the Rogue.