Motorcycle Man Cave / Garage Bar Makeover ... a gift to my Dad

[@rogueengineer]

Written Article: rogueengineer.com/motorcycle-man-cave-garage-bar-makeover/ Cooper & Hunter Mini Split: amzn.to/3k2RHAD Garage Floor Coating: rogueengineer.com/diy-garage-floor-coating/ Dry Bar Plans: rogueengineer.com/diy-dry-bar-plans/

[@rungecreative3084]

Way to go Jamie she was defiantly the mvp of this project

[@rogueengineer]

For sure! She usually is

[@quanghuypham3406]

This is a valuable addition to my woodwork collection kzbin.infoUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seems to stand out from the rest whenever you go through the library. This is a masterpiece.

[@Danman1972]

for painting the block. put the tape on the grey color to edge the orange. Run a bead of clear caulk at the edge of the tape where the colors meet and smooth it with putty knife. Then paint and pull the tape while the paint and caulk are wet. You get a perfect edge on a bumpy surface. Work great on walls with texture like they do around here. Makes nice clean lines

[@geneswiech4381]

Jamie and you make a great team... nice thing to do for your dad.

[@boogie3377]

Excellent work! And a high five for Jamie's skills and work ethic!

[@ArmandoPerezContractor]

Always a pleasure to see people so talented in this fascinated world of renovation. Thank you for the ideas .I keep in touch

[@akkiboy99]

How can you show all the beautiful work done and not show your dad's first reaction when He saw this!!! What a good son/daughter-in-law you folks are. Great work!

[@nicholaswise2630]

Did you not watch the whole video? It's literally right there at the end...

[@akkiboy99]

Oh my bad! You are right, I stopped where he mentioned I know my dad is going to love this. I thought that was the end.

[@leroymoore76]

Enjoy video and dad has a great son

[@mferrarorace]

Nice job! Jamie you are amazing. Do you have a sister? Great job you guys what a gift for your dad! Awesome!

[@2wheelzarebetter]

What a lovely thing to do for your dad.

[@Barnacle392]

How cool is that garage! You dad is very lucky. I love using Ryobi tools too.

[@theflyingspaghettimonster3252]

I wish you'd shown more of the bikes, they looked great from what little I saw of them.

[@rogueengineer]

Yea I probably should have. They are pretty sweet

[@therealtormechanic]

That's awesome I would love that have millions of tools and three bikes myself that came out amazing!!!!!!

[@3326jd]

Great Job.

[@rogueengineer]

Thank you!

[@dillondrinkwater6465]

Super awesome to be able to see how y’all made some of the things you made in our fan cave! Was a pleasure having y’all down and thanks again for the amazing work you both did!

[@rogueengineer]

Thanks Dillon! Can’t wait to release the fan cave video. Keep an eye out for it coming soon!

[@rogueengineer]

kzbin.info/www/bejne/hXqrdmljp56te8k

[@DeirdreNL]

this is awesome! great job, love the bar and shelving! defiantly going to use that for my garage in the future!

[@AprilNicoleMusic]

Great makeover project! Love the way the bar turned out with those neon lights :)

[@rogueengineer]

Thanks April!

[@shaquillefarrington1310]

@@rogueengineer where did you got the pipes from by the bar ? Can u drop the link

[@Zmaslanik]

Great Job! And Go Steelers!

[@Peter-gh5tz]

Beautiful job and beautiful to see it given to your dad, he must be so proud You guys in the USA have huge garages, I’m jealous Cheers from Australia 🇦🇺

[@rogueengineer]

Thank you!

[@adamw225]

I see you’re a hawks fan Peter you’re obviously a man of good taste ha

[@RSST662]

Great video . Thanks .

[@-Ricardo]

Off topic but I LOVE Jamie's nails

[@engqi9463]

What a brilliant set up especially the bar

[@robertocantero5538]

Very nice job, congratulations!!!

[@floridaliferich]

That came out great.

[@MyGoat65]

Paint the electrical pipe on the orange stripe orange.👍🏻

[@cbeserra]

Super cool!

[@DoNtCaReBrO_305]

Killer video

[@TheWhataman00]

Jamie...Artist

[@justaddmudd2852]

that came out super nice!

[@QuadeQuick]

Great job!

[@bernardcassidy5287]

Class job

[@philh1245]

I have a 95” TV in my garage and I sit in my garage and watch youtube on 1/3 of my iPhone screen.

[@cm1133]

lol

[@sonata2477]

Amazing family job ...

[@topper009]

That's basically the Downton Abbey of Florida

[@rogueengineer]

Hahah so true!

[@21Rodge]

Nice job

[@jpisty]

Nice. I think I’ll copy your backbar plan

[@jbawdon3111]

Nice outcome. I learned some new words though -- degreeze? degreezer? degreezing? I'm going to have to get my dictionary and check these out!!

[@garrettsmith85]

I spy an OCMD Fish Tails shirt!!

[@RYANMAKO]

Looks incredible, and inspiring to attempt! Thanks

[@EmJayCD]

Great job... looks awesome. But what I want to know about is that car seats bench you got back there. Any video footage of it or plans?

[@abrahamjordan6714]

Great job! Whats the size of that room?

[@scheraqhassim3150]

The old garage wasn't bad to begin with but damn great job on the Re-Up

[@justdiyit9683]

That degreazzzzing process was satisfying lol

[@cm1133]

@1:42, there is actually a little known hack to obtaining wall paper like, crisp paint edges, with no bleeding of paint under the tape lines, when painting stripes. What you should have done is laid out both rows of painters tape. Then, you should have painted black paint below the bottom edge AND above the top edge of the lower painter’s tape. Then, you should have painted grey paint below the bottom edge AND above the top edge of the upper painters tape. In other words, let’s say your orange stripe was 8” high, where the orange stripe would end up being, you would first have 4” of black paint above the bottom row or painters tape and 4” of grey paint below the bottom edge of the top row of painter’s tape. By doing this step first, before you paint the orange stripe, you are essentially sealing the edges of the painters tape to prevent orange paint from bleeding under the edges of the painters tape. I hope this makes sense.

[@bobdecker2446]

Great job! But the real hero of this project is not the A/C, it's Jamie!

[@baileybuster2119]

That was exactly what I was thinking when I saw the video!!!

[@cm1133]

I concur!

[@bluexhxr6926]

Looks like a clubhouse

[@floridaliferich]

What are the chairs near the tool chest from? I like the look and would like to add something like them to the motorcycle mancave that I am working on in my garage.

[@DanMcB1]

De-greasing. GreaSe.

[@Peter-xx4be]

Looks amazing! How comfy are those chairs and where did you get them? I have bar chairs but aren't the best, been on the lookout.

[@juancarlos-np2hq]

Nooo. Que. Sueño. Me. Puse. A. Imaginarme. Que fuera. Mío. Felicitacionea

[@hoenircanute]

Hmm, ive been searching for that Rocksolid product here in Norway but cant find it. Not even any hits on it on Germanys Amazon page where i buy my amazon stuff. :( We all mostly use epoxy here.

[@sr7138]

If youre in Orange County, CA I can finish the Harley Logo.

[@ericwoodard8332]

Do you have any trouble using the attic step with the placement of the bar.

[@brentville9414]

Looks great! what did you use to hold the wood shelves to the galv plumbing pipes from underneath @ 13:32? Looks like the electrical tie ins... hard to tell.

[@rogueengineer]

Thanks! Those are two hole clamps for EMT conduit

[@DavidAbraham87]

What size is your garage area?

[@shaquillefarrington1310]

Where did you got the pipes from for the shelves?? Can you drop the link

[@baileybuster2119]

Could you have done the installation yourself if it wasn't for the warranty?

[@Kenn1969]

More of Jamie!!!!😏👍

[@aeromedical6750]

LOL. His assistant is definitely on point.

[@Hhhhhgggihgdd]

Awesome garage , how many bikes do you own ?

[@shaquillefarrington1310]

Hello where did you get the pipes from for the shelves can u help?

[@shaquillefarrington1310]

I’m still looking for the pipes for the shelves help please???

[@DocRonSnyder]

You are a great son and a great daughter-in-law. Your father is lucky.

[@johnjg88]

How is this floor holding up today?

[@468002]

Did you only need to use 1 rocksolid 2.5 kit to do the floor? I keep seeing others recommending to use twice as much

[@rogueengineer]

I used two kits.

[@prodriguez3290]

how much did cooper and hunter charge total for that install?

[@rsox38]

Go Hokies? Or does your dad just have great taste in hats?

[@chase0803]

Why did they use a multiple zone condenser and only install one head?

[@rogueengineer]

We installed two heads

[@ilovepizza8263]

BAD....ASSSSS!

[@johnweaver6553]

How many square feet floor is it

[@ebar2010]

What brand and color paint did you use? Or did you have them custom matched?

[@thethrottletherapist]

oh man, definitely garage goals.

[@isabelramos7372]

Where did you get those stools?

[@Sway575]

What did u use to mount 2x4 to block ?

[@markclark8196]

How did you make the wall shelves

[@richarddreiling3262]

how does the mini split drain hose work?

[@rogueengineer]

It has a small pump to draw it up to the drain.

[@richarddreiling3262]

@@rogueengineer thanks

[@ConcreteFloorSolutions]

No disrespect, you followed directions. Once again, the epoxy coating manufacturer did not recommend the proper preparation. If you apply a coating on top of a coating that is peeling, now you will have two coatings that peel. If you didn’t diamond grind the floor to clean, white, scratched concrete, it WILL FAIL. When it does, look us up for high quality epoxy that WON”T peel when installed properly. Give us an update on the floor in 6 months.

[@iverson2k10]

I liked the setup until I notice the Steelers logo.... jk good job

[@brandonousley3798]

Same

[@yamahaxs6501]

love the Steeler sign!

[@ryanrussell251]

The wife got some paint skills

[@RomanEmpire16]

How much did all this cost ?

[@Raysgarage90]

Where’s our invite ?

[@allisonsmith8749]

Square feet?

[@fernandovergara3119]

Motor ablar sucio no tiene auto

[@HerrPoopschitz]

Another ‘garage’ where no work is done. Good job, princess. Hope you didnt chip a nail.

[@itzgood421]

but they have a screen door that keeps the air in so.........

[@reiver6589]

Great job.

[@rogueengineer]

Thank you