Rokr Magic Cello Music box step by step making

[@LennoCao]

DIY Crafts: Rokr Swing Ride Music Box build and colorful ｜Limited Edition music box ROKR kzbin.info/www/bejne/bZuVkK2LodeIjdk

[@Chilaplau]

三角形齒輪必須留心三角對三角圓對圓，否則後續不能運行

[@Chilaplau]

他初時是錯的，後來才修正

[@alexxander-x1b]

Very nice tutorial🙌 At first im very struggle, but i keep watching your video till my cello successfully done Thank youuu 👍🫶

[@ginaartsgallery]

Thanks for the comment. I made quite a lot of RORK products in my channel. Hope can help you.

[@SelectedReviews]

Thank you for putting this on KZbin. I built this Cello today and was unsure in a couple of spots what the Chinese instructions were trying to explain. Your video made the build smooth and enjoyable.

[@ginaartsgallery]

glad you like my video. I have some other videos for the ROKR.Hope you will enjoy!

[@SelectedReviews]

@@ginaartsgallery Sorry guys but now I have a problem. Made the Cello, all good. Made the stand, not bad. But I cannot connect them. Things don't align. The gears don't mesh, they overlap. Any suggestions gratefully accepted.

[@ginaartsgallery]

When you reach step18 according to the guide, the cello body should be finished. Also the stand.Please make sure the back gear engages with the movement gear when installing.Make sure to align the four holes with the protrusions before pressing it into the slot. If the gears don't match, Back to step15, please note to install the movement with a slight upward tilt.

[@_rumple_5199]

Just got this cello for my mother for mother's day...very nice, informative video. She struggled with some of the Rokr instructions on other models, and this type of instructional video helps immensely. Thanks!

[@ginaartsgallery]

@@_rumple_5199 So glad to know she made it! Thank you for your comments!

[@JavierPerez-se2pb]

I used the instructions that came in the box about 80% of the time and I used your video about 10%. Whenever I was really lost or just wanted clarification. I finished it and it works perfectly. In addition to the tools in the box I also used needle nose pliers which came in very handy when getting some of the pieces to fit or removing shaft sleeves whenever I placed them accidentally, I also used box cutters to cut the adhessive tape to precision.

[@ginaartsgallery]

It sounds like you managed to combine the provided instructions with some additional resources and personal ingenuity to navigate through the tricky parts effectively. Your use of needle nose pliers and box cutters was a smart move to deal with the intricacies of assembly and precision work required.

[@wolffriendinus]

I usually use a pair of tweezers to pull the little splinters off the pieces, and I'll drop the splinters into a cup.

[@rodadams8422]

Beautiful piece ❤

[@pitifulpearl]

Thanks! I would have never found that clear plastic gasket if not for you!

[@user-hl2sh6qi9n]

매직 첼로를 샀는데 어떻게 꾸며야 할지 막막했는데 섬세하게 만드는 법을 가르쳐 주셔서 진심으로 감사를 드리며 이제 만들 자신감도 생기네요, 새해에 많은 복을 받으세요,

[@ginaartsgallery]

소중한 메시지 감사드립니다! 매직 첼로를 샀으며 꾸미는 방법이 막막하셨다는데, 저의 도움이 조금이나마 도움이 되었다니 기쁘게 생각합니다. 자신감이 생기셨다니 정말 좋은 소식이에요! 새해에 여러분에게도 많은 복과 행운이 함께하길 기원합니다. 만약 더 궁금한 점이나 도움이 필요한 부분이 있으면 언제든지 물어봐주세요. 즐거운 시간과 아름다운 작품 만드는 즐거움이 여러분과 함께하길 바랍니다. 새해 복 많이 받으세요! 🎉

[@yong2579]

just in case anyone has the same problem as me whereby the gear get stuck after playing for a short while (45 to max 90 seconds), at least for me this is due to the clear plastic circle that you have to poke the metal rod through being too pressed down as instructed by the instruction manual. I use a plier and loosen each and every clear plastic circle for each gear and now the whole cello can play around 2 minutes 30 seconds without stopping. The full time for the musical box is 3 minutes 30 seconds in case any one is interested. juz be super duper careful with pulling out the clear plastic circle cuz i break 3 wooden parts while doing so but lucky all 3 have backup parts!

[@ginaartsgallery]

Thank you for sharing your experience and providing a detailed explanation of the issue you encountered and the solution you found. This information can be incredibly valuable for others who might face a similar problem while assembling a similar kit or working on a project involving gears and plastic circles. It's great that you were able to identify the specific cause of the gear getting stuck and take steps to address it. Your cautionary note about being careful with the clear plastic circles is especially helpful for anyone attempting a similar fix. Sharing insights like this helps build a community of knowledge and can save others time and frustration. If anyone else encounters a similar issue, they may find your solution quite useful. Thank you for contributing to the collective wisdom of makers and hobbyists!

[@elenagrode8399]

I have the same problem.just stuck after a while..then i have to push a bit.and it's plays again..have to find out...

[@yong2579]

@@elenagrode8399the easiest way to find out if it is a gear problem is to take out the cello part and hand rotate the gear behind the cello, it should feel very loose! if it is tight then u have to loosen the gear, if it is very loose then try playing the music box on its own, make sure it can play alone by itself for 3 min 30 secs, if it also can do that, then it juz mean the connection between the cello and the music box is bad! hope this help u!

[@miniwonderlandhub]

Wonderful!

[@ginaartsgallery]

🥰

[@theflaminglitten-fo6jd]

I got mine at 8 o clock yesterday. I stayed up all the way to 8 am working on it until it was finished 😅

[@ginaartsgallery]

This can indeed be addictive

[@ann-marie7468]

hello, quick question , how did you separate the clear circles for "making the gear part 1". At 5:30 they are close together then there is a jump to 5:33 and there is space. I can't get mine to move so how were you able to?

[@ginaartsgallery]

wax and use a small screwdriver to make it move.

[@ann-marie7468]

Thank you :) Ill try that right away@@ginaartsgallery

[@ginaartsgallery]

enjoy :)

[@kieranstafford9718]

I found spraying wd40 on all the cogs after i was finished made it work great. I had no wax

[@ginaartsgallery]

great except smell

[@wolffriendinus]

Building this right now and C9 (brown arch piece on the back) is driving me crazy lol. It keeps falling off every time I have to move the cello.

[@ginaartsgallery]

I can understand how frustrating that can be! Here are some tips that might help you keep the C9 piece (the brown arch piece) in place while you continue building your Magic Piano Music Box:Temporary Adhesive: Use a small amount of removable adhesive, such as poster putty or double-sided tape, to hold the C9 piece in place temporarily. This can provide enough grip to keep it from falling off while you work on other parts.Rubber Bands: Carefully use small rubber bands to hold the piece in place. Wrap the rubber bands around the entire assembly gently to avoid damaging any parts. This should keep the piece stable while you work on other sections.Check Fit: Ensure that the C9 piece is fitting correctly and that there are no small obstructions or misalignments causing it to be unstable. Sometimes a slight adjustment in the positioning can make a big difference.

[@wolffriendinus]

@@ginaartsgallery Thanks for the tips! I'll give those a try when I work on it again. I had to stop cause I was getting really frustrated when it came to putting on the plastic bow part that moves. I know what I need to fix, but fixing it isn't easy lol. I decided it's better to stop for now before I break something lol.

[@ginaartsgallery]

You're welcome! Taking a break is definitely a good idea when you start feeling frustrated-it's better to pause and come back with a clear mind. Remember, patience and precision are key with these intricate kits. You’ve got this, and it will be worth it when you see the final product working beautifully! Good luck, and feel free to ask if you have more questions or need further assistance.

[@kccubing7649]

nice video, it helped me alot!

[@ginaartsgallery]

glad you like it

[@yolandabuesobaidez6870]

Me too!!!

[@virginialeite2787]

💖⚘️

[@ginaartsgallery]

Glad you like it

[@oh.no.]

첼로 다 만들었는데 소리가 안나와여 ㅠㅠ 테옆 돌리는 방법 몰라서 막 만졌더니 망가졌나봐요

[@ashleysheinarandid2572]

How to remove P11 in the metal???

[@PokemonCrochet]

Good job!

[@ginaartsgallery]

thanks

[@preppy_vibes977]

ummm so i put in the wrong rods for some parts of the gears idk if i can still build it so far it looking pretty good but idk if it will work like basically for gear part 1 i put in the longer rod and for gear part 2 i put in the normal rod pls help idk how im gonna make it work and it like 60 bucks too so im not tryna to waste my money over here

[@ginaartsgallery]

It sounds like you're having a bit of a tough time with your Magic Cello Music Box kit. Don’t worry, mistakes happen, and there are usually ways to fix them. Here are some steps you can take to try to resolve the issue:Assess the Situation: First, check if the gears are aligning and functioning correctly despite the incorrect rods. Sometimes, small mistakes may not significantly impact the overall functionality.Consult the Manual: Look at the instruction manual to identify the specific parts involved. See if you can reverse the assembly steps to correct the rod placements.Disassemble Carefully: If possible, carefully disassemble the parts where the incorrect rods were placed. Be gentle to avoid breaking any pieces.Replace the Rods: Once disassembled, swap the rods to their correct positions. Ensure that each part is correctly oriented as you reassemble the kit.Test the Gears: After reassembling with the correct rods, test the gears to see if they move smoothly and correctly.

[@preppy_vibes977]

​@@ginaartsgalleryThank you for the advice!! I will just be keeping the incorrect rods in the same place cuz at this point theres no going back but thanks for ur help with some other things!!!! 🙂

[@alissar1748]

I made a mistake on one of the gears, but I can't fix it because the Shaft Sleeve (P11, the tiny circular parts) isn't coming off of the steel pole. Any advice on how to remove the shaft sleeves so I can fix my gears? (please I need help)

[@ginaartsgallery]

Try applying a small amount of lubricant (such as silicone spray or machine oil) around the Shaft Sleeve where it connects to the steel pole. This can help loosen any potential friction.Attempt to gently rotate the Shaft Sleeve back and forth on the steel pole. This can help break any potential adhesive or tight fit.Carefully use a pair of pliers to grip the Shaft Sleeve. Hold the steel pole securely with one hand while turning the Shaft Sleeve with the pliers using the other hand. Be gentle to avoid damaging the Sleeve or the pole.

[@JavierPerez-se2pb]

Using needle nose pliers also help.

[@loversheep9489]

I messed up one of the gears. How do I get the plastic clips off so I can fix it?

[@biancachen51]

same me too😂

[@loversheep9489]

@biancachen51 I found a way but it's hard. Grab the tiny screw driver and use it to hammer out the metal bar. You can't rip off the plastic and it'll take a while but it works.

[@loversheep9489]

🔨

[@biancachen51]

Got it.Guess what. At last I use the pliers😅

[@loversheep9489]

@biancachen51 😆 I might buy some. I also grabbed a lighter, heated up a knife, and then melted it off.

[@Emily-my2mx]

This is v cool! Thank you for postiing :) Question: do you think its possible to get a different music box to play a different song rather than chopin?

[@ginaartsgallery]

that is a interesting question. I think it is working if the music box size is fit and the gear is match. Will try and let you know the result if I have time to do the experiment.

[@user-sr9pv5cj3x]

Merci de votre présentation, je commence tout juste le mien mais je suis bloquée, je ne sais pas quelle cire utiliser. Merci de votre réponse / Thank you for your presentation, I'm just starting mine but I'm stuck, I don't know which wax to use. Thank you for your reply

[@ginaartsgallery]

check your box and you will find the wax included.

[@user-sr9pv5cj3x]

No, it is'nt @@ginaartsgallery

[@user-sr9pv5cj3x]

no, it isn't.@@ginaartsgallery

[@Dragonking-im1fi]

Did you do something to the gears before installing them, they seem to be so smooth compared to mine 😂

[@ginaartsgallery]

Use candle to wax it before installing

[@Dragonking-im1fi]

@@ginaartsgallery the whole thing or just around the teeth?

[@vampyar]

I followed everything perfectly and mine still gets stuck, I tried to fix it and ended up irreparably breaking it. That was a lot of wasted money. Edit: I sanded down a couple of gears and now it runs fine. Think I just got crazy unlucky with a defective part

[@ginaartsgallery]

glad you made it!

[@kieranstafford9718]

Spray wd40 on the cogs. It works great after

[@carriedemaio4555]

Cello runs counterclockwise. But needs to run clockwise. Cant change the music box to run the opposite direction, obviously... Not sure what to do

[@ginaartsgallery]

You may face a challenge in reversing the rotation direction. I suggest that review the assembly instructions for any indication that the gear mechanism can be reversed.please check online forums or communities where individuals discuss ROKR music box kits. Others who have built the same kit may have encountered similar issues and can share insights or solutions. Welcome any video viewer to share their solution.

[@AngelOfMusic2]

7:29 isn't E21 a wood piece and not a clear?

[@ginaartsgallery]

E21 is a transparent clear plastic spacer.

[@StephenY151]

Is this a typo in the instructions then? E21 is wood not plastic. The plastic spacers are P11. It looks like it will work either way?

[@rdthrthth]

i'm also at this part and notice the instructions say to put e21 (wooden part) and not p11 (small plastic part)

[@fabiolasuazo8421]

I got mine today and in the middle of doing the scroll and pegs it broke 😭 I’m sad and I can’t repair it

[@ginaartsgallery]

you can contact seller and tell them the broken piece and they will send a new piece to you

[@silas5623]

12:55 what should I do if the piece E13 breaks?

[@ginaartsgallery]

use glue or email the customer service to ask a replacement

[@ashleydl1557]

Did I miss the book part or it didn’t show in the vid?

[@ginaartsgallery]

You are right. It didn’t show I the video.

[@nickrr5234]

Thanks for the guide. I seem to be missing the plastic gasket pieces (P17). How thick are they? If I know this I guess I could find a substitute without having to wait to be sent a replacement.

[@nickrr5234]

Oops, false alarm - found them!

[@ginaartsgallery]

He is transparent, so it’s understandable that you can’t find it

[@Binnihar]

Great work. Was the wax included in the box?

[@ginaartsgallery]

yes, there is a little wax block coming with the box. But I will use my birthday candle if I need more. :)

[@Binnihar]

Thanks for the reply. It must be hidden in a good place in the box :) or I have misplaced it. Will then use a candle.

[@ginaartsgallery]

You are welcome! Enjoy your day!

[@kieranstafford9718]

Spray wd40 on the cogs when you're done. Works great

[@preseep2919]

Pls don’t show ur hand I can’t c ur process very sorry

[@ginaartsgallery]

www.amazon.com.au/Decorative-Bedroom-Girlfriend-Birthday-Christmas/dp/B0D544Y91L/ref=sr_1_6?crid=J80CMRVOKKY6&dib=eyJ2IjoiMSJ9.8ELC16g5gaCxCAek9FUA5NOQOpzBzyjpw5CrSnNYd766ilsA-VkR4GmaUaJYylkik3uFkLDUKWMcw9xwh4t4ja6iZnC7mAmBGYz1j9sDqq3Mn25LwF0sSxPAY0Z7EYstG2KdW5Dj-6go8i9nfhe7BEGbpZG_CGzkkGR8hFjoRBuwle_-W_Bw9PE8d6ycV7qtwJdhfDM3QY8KxiZXKPRQy0_HOrMK7YKnbehlUkNBCRIgkdQ4-ZV7cnL1cf1qHIOP0VCU7iVHo7DIAH0gYzDr0Z8vgr8X3cTudzcqHMr2Too.7GZNlHlc0xR5EFvuLO8zYtaCF0UqDxC9XTk8VF9aijw&dib_tag=se&keywords=tulip+lamp&qid=1725141974&sprefix=tulip+lamp%2Caps%2C221&sr=8-6

[@chokzongsheng9141]

My cello not smooth, it stopped between the cellow stick rack, i needed to apply some force only it can move

[@ginaartsgallery]

Some gears or parts maybe twisted, use gentle force to slightly adjust it. Fully waxing the gears and the stick rack also make it running smoother.

[@empee66]

Thanks for your amazing video. I built the cello but it doen not work as it should. I know perfectly where I made a mistake (see p.7 - 2nd part of manual). It has to do with the triangle and circle marked on the 'half gears'. Neither the manual nor the video is very clear. You don' seem to bother about the placement of both signs. I tried to follow the manual, but in the end, it does not work. I wonder if I can repair it as I only need the cello. Any advice would be welcome!

[@ginaartsgallery]

I apologize for the confusion and inconvenience you've experienced with building the cello. Although I don't have access to the specific manual or video you mentioned, I'll do my best to provide some general advice on how to proceed with troubleshooting and repairing the cello. 1 Review the Manual: Take a closer look at the section on page 7 that discusses the triangle and circle marks on the 'half gears.' Ensure you understand the instructions clearly and identify the steps that might have caused the issue. Sometimes, manuals can be challenging to follow, but carefully reviewing the steps can often reveal the problem. 2 Contact Customer Support: If the cello kit was purchased from a company or manufacturer, consider reaching out to their customer support. They might be able to provide additional guidance or clarify the confusing parts of the manual. 3 Patience: Building intricate instruments like cellos can be challenging, even with detailed instructions. Stay patient and persistent; don't rush the process. Take breaks if needed to avoid frustration. Remember that it's common to encounter difficulties during the assembly of complex projects, and most problems can be resolved with careful examination and adjustments. Good luck with repairing your cello, and I hope you can soon enjoy playing your newly-built instrument!

[@empee66]

I managed to repair it by paying attention to the triangles and the rounds. It works perfectly!@@ginaartsgallery

[@ginaartsgallery]

Congratulations! So happy for you.

[@wendyzhao3091]

Is there a way to pull the clear piece because they hurt to pull up if you make a mistake

[@ginaartsgallery]

I have no idea about you mentioned "clear piece". Is it the transparent plastic piece as a space between the gears? Or you may give me the time for which part of the video.

[@wendyzhao3091]

@@ginaartsgallery yes the transparent plastic piece in between the gears. I am having a hard time taking them off my mistake and I can’t seem to take them off if there are any tips to get them off it would be appreciated ☺️☺️

[@ginaartsgallery]

Oh， I see.The reason you can't take it off is you push the Bushing (which is P11 in the instruction) too tight on the both side. Use a knife or other thin solid tool to loose the bushing.

[@Ellen-gz3iv]

And what point can the bow move back and forth? I have assembled the cello but it won't move. 😢

[@ginaartsgallery]

sometimes it blocked. Press the bow gentle and try to force it to move. if not, check the gears and wax them.

[@runesalvatore4843]

😮did u wax any parts?

[@ginaartsgallery]

Yes， you may found the instructions show which parts need be waxed

[@kieranstafford9718]

Spray wd40 on the cogs when your finished

[@TiboFR]

Those plastic sleeves are the absolute worst because of the amount of pressure needed to get them down. Lead me to damaging surrounding pieces

[@ginaartsgallery]

Contact the customer service and ask for the damaged parts replacement.

[@biancachen51]

If I finish but it can not work properly like it get stuck but all the gear work. What should i do 😂

[@ginaartsgallery]

shake the body and pull the Cello Tailpiece gently

[@user-mo9lm7er2d]

This is completely bullish I tried following the video and ended up banging my head against a wall and breaking pieces because I tried to copy what they did

[@ginaartsgallery]

I'm really sorry to hear that you had such a frustrating experience

[@moniqueodile]

Some wheels have a little marking! Make sure they align as per instructions!

[@ginaartsgallery]

Need wax it before assemble.

[@moniqueodile]

Yes but some wheels have a small marking on them. These have to match with another……

[@nexueunderdawater.]

My music box keeps stopping i have to move the gear by my finger I didn't wax the parts

[@ginaartsgallery]

It is important to wax the gears and sometimes sand the edge is necessary.

[@i64fanatic]

If those clear acrylic stoppers are pressed* down too tight on the steel pins, especially on the middle gears, that can cause too much friction even with sanding/wax. This was my issue, needle nose pliers to fix it. Just twisted the stoppers up a teeny bit. Too loose will cause derail of the bow/gear binding issues, so it's a bit of a balancing act.

[@kccubing7649]

does it come with extra parts?

[@ginaartsgallery]

no extra parts

[@kccubing7649]

@@ginaartsgallery hm,i just finnished mine and have some!

[@ginaartsgallery]

oh, Some easy broken parts will have extra parts. Do you have lots left? make sure it is a cello not a violin. :)

[@kccubing7649]

@@ginaartsgallery no, not alot

[@kccubing7649]

what do the transparentt sheets do?

[@ginaartsgallery]

it is a spacer. Take it off after assemble. Ensure there is enough space between two parts.

[@kccubing7649]

@@ginaartsgallery ok thx

[@elijahromo7202]

I can't find the plastic gasket pieces. Were they in the bags?

[@ginaartsgallery]

yes, they should in the bag. you can contact seller and tell them the missing piece and they will send a new piece to you

[@yeonheekim2260]

저는 왜 저렇게 부드럽게 드안돌아갈까여?ㅠㅠ

[@azn1224]

I did everything correct and my music box still doesn't work 🙃

[@ginaartsgallery]

Did you wax it? Sometimes give her gentle knocks will make it start working.

[@Shin-lp6iz]

@@ginaartsgallery If gentle don't work, you can always pound it harder. :D