Roland Juno-X - Synthwave Arpeggio programming

[@NogueiraMG]

Very nice video. I received my Juno-X two days ago and I’m learning how to configure. Your video was very useful for my and, certainly, many others! Thank you for post (and sorry for my bad English)!

[@GlennMainMusic]

Thank you so much. Nice to hear that my videos can be helpful 😃😃

[@keekeefries6298]

My Juno X arrives tomorrow! Will be watching this again to get up and running!

[@GlennMainMusic]

Awesome man 😃😃😃

[@slottygw2wvw842]

You had 3k for this!? Should of been 1000usd Maxx maxxxx

[@AdanaMugumu]

@@slottygw2wvw842 it's 2k, 1.5k on sale, I think that's a great value for a synth of that built quality and with all those capabilities

[@DavidChatterton-j6b]

@@slottygw2wvw842 Oh cmon, Starbucks pays you enough so save a few dollars.

[@maximilin8381]

Glenn, you are the best teacher ever

[@GlennMainMusic]

Wow ! Thank you for the nice words 😃😃

[@1975Stevo]

You've just answered my prayers Glenn. I've been searching for a synth but with the ability to quickly play along to a drum, bass and arpeggiator backing. I didnt want an arranger keyboard and i've had a montage in the past but was way way too time consuming to do what you've achieved in minutes with the Juno. Now looking to get one of these. Thank you!

[@GlennMainMusic]

Thanx man :) That’s an awesome choice 😃😃😃

[@TheKorgGadgeter]

Juno-X on the way. Your videos are invaluable tutorials.

[@GlennMainMusic]

Thank you :-) So nice to hear that you can use my tutorials

[@opticalman6417]

got to love this guy he know his shit

[@GlennMainMusic]

🤘😃🤘😃🤘😃🤘🙈

[@JM-xl3ij]

Thank you Glenn! - that is the best explanation so far! I still find it easier to set this up on the Juno Editor - so I wish Roland would also bring the Step Edit function into the software Editor.

[@GlennMainMusic]

Thank you :) Yes - It would be awsome if they did that 😃😃😃

[@barryward7633]

Thank you Glen for all your explanations and time and effort put into this you are great, I own a old Roland XP-50 that was given to me in a dead state plus 3x broken keys, as I am a retired electronic technician I set about repairing the smps ( power supply) then the main pcb plus recapped all the capacitors and 2x faulty series voltage regulators and the DAC chip, the keyboard is now fully operational with 4x SR-JV80 - 03 - 04 - 08 - 16 expansion cards installed, but I am still learning to play the jolly thing as I have never learned to play during my working so that is the hard part for me, cheers.

[@GlennMainMusic]

Wow ! That sounds awesome man 😃😃😃

[@billrebsamen1810]

This is just what I needed to learn - Thanks Glenn! Just got my Juno X this weekend! The seller had it for about two months and needed to sell it - like new in factory boxes with everything just like it was shipped new! $1500 US! Picked it up in person about 45 minutes away - could not have wished for a better deal!

[@GlennMainMusic]

That is awesome 😃 Congratulations with a new monster machine, and thanx for watching my channel 😃😃

[@FeatherGlow1]

$1500! Wow. In Australia, some stores are selling the Juno-X for over $4000! Which is one reason why I haven't bought one. Way too expensive.

[@markusfuller]

Thank you Glenn for another great tutorial on the Juno-x 🎹🖖🎹

[@GlennMainMusic]

My pleasure 😃 Thank you for following my Chanel 😃😃

[@garybunn7535]

Just got my Juno X and was confused about the arpeggio. This video totally nails it. Great explanation and demo. Thanks Glenn

[@GlennMainMusic]

That’s awesome 😃😃

[@b2zap665]

Nicee one! Love these synthwave videos of yours!😎👍

[@GlennMainMusic]

Thank you so much 😃😃😃

[@markfennah4322]

love it ! Amazing Glen :)

[@GlennMainMusic]

Thanx 😃

[@beataddiction6954]

Brilliant video, thank you for teaching us!! I'm using this on the Jupiter X and its a lot of fun..

[@GlennMainMusic]

Thank you , and Nice That i could share my knowledge with you 😃😃😃😃

[@Beatprisoner]

Great tutorial, as always. I really love your videos and your playing.

[@GlennMainMusic]

Thank you so much 😃😃😃

[@synthsamuraiproductions]

Very cool my brother! 🚀 awesome camera angles/setup too.

[@GlennMainMusic]

Thank you so much:)

[@EduardoSanchez-bj1qq]

I'm getting my Juno X in a couple weeks and will be using this video! Great channel Glenn!

[@GlennMainMusic]

Thank you , and a great Choice of synth man 👍👍👍

[@EduardoSanchez-bj1qq]

Hi there Glen . I got my juno x ! So I followed everything on this video only thing is I don’t know how to save it. I saw you were on Scene 8-4 “synthwave 2 . Thanks for the great instructional.

[@mrthomasheder]

Great great video, super nice for all of us 80's guys! 🙂 I'm also gonna purchase the Juno-x.

[@GlennMainMusic]

Very good choice 😃😃😃

[@thejamifan-os4oh]

Thank you Glenn, a great video just picked up my Juno x never used Roland before so learning my way round, so keep the vids coming… Really getting into Synthwave and inspired by your grooves 🙌🏻😎🎹👍🏻💫

[@GlennMainMusic]

Thank you so much 😃😃 And Congratz with your Juno X 😃😃😃

[@larsfrosznielsen3536]

Great lesson, Grand Master Glenn. Thank you

[@GlennMainMusic]

Thank you so much Lars 😃😃😃 And Thank your for all your support over the years 😃😃😃

[@leenitv]

Such an amazing tutorial, thank you! I hadn't dug into the step sequencer in mine yet and it's nice to see how intuitive it all is.

[@GlennMainMusic]

Thank you :) Yes it’s a great tool for making songs on the fly.. or “styles” in a way ..:)

[@leenitv]

@@GlennMainMusic now that I have programmed a bunch of songs, I am still using an external drum machine because I want to be able to change up the patterns and mute some drums throughout the song, but I’m running out of hands when I do this! I’m trying to figure out if you can save more than one sequenced drum pattern in a scene or if there’s a way to mute some drum sounds for variety? Or do I just stick with an external sequencer if I want to control this?

[@GlennMainMusic]

@@leenitv - You can of course make more patterns (scenes) with different drum tracks .. but then again it will be much changes.. but what about using the iarp for variations? But then again you never know what comes 🤣

[@leenitv]

@@GlennMainMusic I just discovered this yesterday! Switching between I-Arp patters is wayyyy easier than what I was attempting. Thank you!

[@pekkagronfors7304]

Glenn for president i Norge. Bra information.

[@GlennMainMusic]

🤣🤣 Takk 🙏🏽🙏🏽

[@toddsmithmusic3172]

Dude I love your channel. I love this synth. You're going to grow very good, keep up the amazing work.

[@GlennMainMusic]

Thank you so much 😃😃😃

[@paulcollins5586]

Superb video and music. Cheers.

[@GlennMainMusic]

Thank you 🙏🏽

[@Digiphex]

More complete song tutorials please! This was great.

[@GlennMainMusic]

Thank you 😃

[@fizzywack]

Brilliant Glenn! Super helpful. I’ve literally just bought a Juno X (after watching your videos) and I know it would’ve taken me ages to work out how to do the arp! All I need now is some colourful LED lights 😁

[@GlennMainMusic]

Thats awsome 😃😃😃 Thank you so much 😃😃😃

[@kaikiefer8303]

Nice effort on the video production side. 3 Perspectives- True step up :) - cool colors . Music as always top - very inspiring - like the base sound. Need see if can jam along MC707/MODX. Thx for sharing your work.

[@GlennMainMusic]

Thank you so much :) Jam it man 😃😃

[@johnnyvegas2015]

Great tutorial, thanks so much

[@GlennMainMusic]

My pleasure Johnny 👍👍

[@popwa6977]

Great synth and great sound

[@GlennMainMusic]

Thanx .-)

[@boundlessmind5083]

Thank you. You answered exactly every question I had regarding the sequencer. The only thing I'd like to know is: After you sequence, can you turn back on the i-arp in order for it to create variations on your sequence and/or can you sequence the drums, the bass, let i-arp handle 2 parts and play the last part?

[@GlennMainMusic]

I do belive so yes.. i did not actually try that, but that should be an option ..😳😃

Thank you Glenn… i am still waiting my Juno-X. This is the first tutorial which explains Step Edit programming. I dont understand why Roland havent done this kind of tutorial before. Your tutorial very Easy to understand. Please keep it on. Next time i want to learn from you i-arp programming. Please make this kind of video deep diving to i-arp. Thank you so much

[@GlennMainMusic]

Thank you ;) I will have a deeper look into the I-arp soon 😃😃

[@robertfoy5886]

Nice work! Got my Juno-X A few days ago and found you looking for tutorials. I find the manual difficult, and the synth itself to be somewhat nonintuitive when it comes to the menu diving. Love the sound though...keep them coming!

[@GlennMainMusic]

Congratz with a great synth man :) And I am glad my tutorials can help you 😃😃😃

[@fratoni3654]

un mostro 😀🌟🎹

[@GlennMainMusic]

👍😃👍

[@aceamadeus]

Hi Glenn, thanks for your tutorials!! We went ahead and got one! but cannot find where are the JD - 800 patches, trying to find muscle beach JD-065, is it hidden in Juno-X somewhere? thanks!✌️🎹🎛

[@GlennMainMusic]

Great buy Ace 👍 The JD-800 is a extension sound pack from the Roland cloud. But it will give you a “lifetime” access to it. It’s 149$ for it I believe. I really love the sounds in it 😃😃😃

[@aceamadeus]

@@GlennMainMusic thanks Glenn! may i ask you have you tried the roland cloud? will a subscription to it include JD-800 and others? 😃🎹🎹🎹🎹🎹🎹🎹

[@alanblight9233]

Amazing , thanks again

[@GlennMainMusic]

My pleasure 😃😃 Thank you 🙏🏽

[@IscariottActual]

This video is so helpful

[@GlennMainMusic]

I’m glad to hear that 😃😃

[@STOKER_DayZ]

excellent tutorial - thank you

[@GlennMainMusic]

Thank you so much:) My pleasure 😃😃

[@Sont256]

Great tutorial, Glenn!

[@GlennMainMusic]

Thank you Sonia 😃😃

[@ElectronicazMusic]

Great vid. I really liked the tune too. 😁 ♥ 🎶 🎹

[@GlennMainMusic]

Thank you so much 😃😃

[@synthtitan9523]

Hi, Can anybody you please provide me advise on the following: How do I setup the arpeggios on a Juno-X, so that they play independent from each other other multiple keyboard splits? I tried to setup keyboard ranges for each parts, but no matter what I do the arp's do not play independent. Play an arp on one split and it affects the arps on other split. It looks like the arps cannot be separated and are triggered by the entire keyboard, despite the key ranges. Thank you in advance

[@GlennMainMusic]

It is the key range setup. But be sure to have the main key change on “0” if it’s up or down octaves then you have to take that into consideration regarding your key range on every part. I think that might be the problem.. 😃

[@alice1547]

hi, I did everything, but I wanted to make a pad with my right hand, I made part 1 pad, 2 bass, r the drums... only that when I play the pad even if I have calibrated the range of the keys, playing the pad the bass arpeggio skips ;(

[@GlennMainMusic]

Check the transpose settings as well. Sometime it gets a bit messy if you’re up or down 1 octave.. Hope this helps you 😃😃😃

[@synthtitan9523]

I followed the instructions in your video but I cannot get the arpeggios to play independent from each other. I set the key ranges, switched to ARP-MODE to STEP (even tried NORMAL ARP), but for some reason the arps are not independent. When I play the arp on the left-side of the keyboard it influences the arp on the right-side and vice versa. You can play the arp on one side of the keyboard without triggering the arp on the other side. But when you play both right and left side of the keyboard, the time is divided over both arpeggios, as if playing one big single arpeggio. For example: the left side suppose to play a 1/8 note arpeggio. This is the case when only the left side is played. Same for the right side arpeggio (e.g. set to 1/16 note). When played together the rhythm of both arpeggios in changed. It seems the left side arp is waiting for the right side arp to finish. What am doing wrong here? It is really frustrating me. On my Yamaha Montage I set the key ranges for each arpeggio. I cannot find a similar function on the Juno-X. There are some settings in the ARP COMMON section called In Range Low - In Range Up, but these seem to affect the key range for ALL arpeggio's not individual parts.

[@GlennMainMusic]

I’m not quite sure , but did you set the key range for the split points ? They can be a bit tricky to set right if the synth has been transposed or octave change is enabled.. see if this can be the problem, and feel free to let me know if it doesn’t work ;) And I will do my best to help you 👍

[@synthtitan9523]

Hi Glenn, I did set the key ranges for each part in the key range settings. What do you mean with octave ranges enabled? Are there other options to consider? Thank you for your help.

[@DavRBailey]

Thanks for the great tutorial. I've been enjoying my Juno-X and am already pretty fast at navigating the menus and screens and such. One quick question, as I'm still trying to understand how the keyboard affects the parts being controlled by the step sequencer. I copied your settings exactly to recreate your demo sequence on my Juno. (Only substituting the one pad on Part 1, since I don't have the JD-800 installed.) When I have only the bass (Part 3) active and running on the arp, it plays fine by pressing single notes in the left hand, since the "Hold" button is active. However, as soon as I play a chord with the right hand, above the key range "high" setting, while it doesn't play any notes (as expected) it immediately stops the note that was automatically holding in the bass. Does your demo scene you used for this video do the same? If the Key Range high setting is set, and I play ABOVE that setting, I can't figure out why it cancels out the bass note that's down below the key range cutoff note. It's frustrating, but maybe I'm just not familiar with how the step sequences behave when playing the keys.

[@DavRBailey]

Looks like I jumped on the comments section just a moment too soon. Dug into the manual further and learned that at the bottom of the "Key Range Settings" screen are two settings under "Arp Common" for "In Range Low" and "In Range Up". These settings tell the arp which keys to pay attention to when you're pressing the keys. Mine had defaulted to the full range of the keyboard, so playing right hand keys was cutting off the left hand bass. As the manual states: "Pressing a key outside the specified range does not affect the arpeggio function." Problem solved! 🙂

[@GlennMainMusic]

Thats great man 😃😃😃

[@fedchavez6098]

Hi Glenn! Thanks so much for putting this together. I tried to recreate it so I can learn the process, and I'm coming along an annoying problem. When I start the arpeggiator, and I have all 4 synth voices set to on, anytime that I play outside of the unison bass range (so as to play the chord synths) it turns the bass off. I've made the exact changes to the keyrange per voice as you did in your video, and I'm still unsure why it does this. Help! :)

[@fedchavez6098]

By the way...when I turn the Step Key Shift off on the Unison Bass, then I am able to play the other voices without the bass silencing like it does when step key shift is on. If you have any tips, I'd be super appreciative. Thank you!

[@GlennMainMusic]

Try to set the key range according to the transpose you made. I had the same problem, but the sequencer just understands what key you’re actually plying in the scale you set it in. So if you transpose the bass -12, then you have to do the same within the key range 😃

[@mrrusty1965]

Thx for well made video

[@GlennMainMusic]

My pleasure - Thank you so very much 😃😃😃

[@Synthboom]

hey, I don't know what am I doing wrong: my arp part edit it just not working. I have one switch on and the part is not doing the arpeggio. only when I am turning on all 4 parts the switch to on, the arp is working. but that means all the parts are playing the arp and I only want one part. maybe you can help ?

[@GlennMainMusic]

That is strange… although it can be a “key zone” thing. Be sure to check that it triggers at the key zone you’re playing 😃 if that’s not the case, then I don’t know…😃😳

[@GuitarsAndSynths]

Can you do a video on darkwave production and also drum programming for darkwave? I am using my Access Virus TI2 and Oberheim OB X8 for the drums, bass and pads. Don't have a Juno X yet but can get there with my setup.

[@GlennMainMusic]

I will do that 😃😃😃

[@synthtitan9523]

Great video Glenn 👏Just to make sure I understand correctly: You have to setup the parts into different key ranges in order to make sure each part can play its own arp, without being triggered by other parts. Does this also work for the Jupiter-X?

[@GlennMainMusic]

Thats right 👍 And its the same step sequencer in the Jupiter X / XM too :) 👍👍

[@siliconpeoplesiliconpeople2778]

Thank you for your inspiring videos. I have tried to start arpeggio with midi but it does not succeed. Have you succeeded in this. Matthias

[@GlennMainMusic]

Actually not, but I would think that it’s a matter of settings in the midi menu… I run the arp with midi tempo sync from my Nuendo (Daw) and that works fine 😃😃

[@hekuayit.v.c5446]

Sir u n ur music r cool. Super 👍👍👍

[@GlennMainMusic]

Thanx 😃

[@TheCrokamikaza]

Hi Glenn, can you please explain me how you save new "Scene"? Im 10 time make it your sample and after that not save. Thank you

[@GlennMainMusic]

If you check on page 24 in the manual you will have a great explanation there :) It’s a bit to much to explain here ..:) There is an easy explanation in the manual, just follow the steps 😃😃

[@MusicZeroOne]

I waited 7 months to follow this tutorial, I eventually got one this week! Love it & excellent tutorial thanks. Do you remember the bass patch you used on the second demo you done by any chance?

[@GlennMainMusic]

Thank you :) The bass patch I made myself.. trying to make it a bit “Poly6” if you know what I mean :)

[@jumb0j0ck]

Glenn, many thanks for getting me started with my Juno X. I'm now working on Top Gun and The Musical Box (Genesis). I've been through your tutorial a couple of times; what am I doing wrong? At 13:17, you start playing the chords over the bass and drums. As soon as I select a key in the top range, my bass stops but the drums keep on going. Any idea why this might be? Thank in advance, like and subscribed. All the best.

[@GlennMainMusic]

Thank you so much:) I think its a «key range» problem. Its important to set the top key for the bass, or else it might “think” that it’s supposed to play, and that cuts the sound. And also check that you are not using the transpose (octave) when playing … maybe that solves the problem :)

[@jumb0j0ck]

@@GlennMainMusic I'll have a look. There are a couple of options as I remember: one is scene related, the other arpeggio related. I'll report back (at work, wishing I wasn't). 😁

[@GlennMainMusic]

@@jumb0j0ck 👍👍👍

[@theguillaumedu44]

How do you don't affect the high part of the keys with the arpeggiator ? My arpeggiator is Always connected with the other tones i can t play other things..

[@GlennMainMusic]

Check out the “key range” that’s were you set the lowest and highest key for the part :) It’s all explained in the video 😃😃😃 Byt make sure to not use “transpose” or Key change when setting the key range 😃😃

[@mrrusty1965]

Glenn, I simply wish to split the keyboard, create 2 tones (Lefthand - Syn Vox and Righthand - Marimba) . Please help explain the steps needed. Thanks!

[@GlennMainMusic]

Just set the key range for where you want your split point. Or just use the split point that’s set (C3) And assign the sounds to the parts 😃😃

[@GuitarsAndSynths]

I am using my Virus TI2 synth for this since it can emulate the Roland Juno plus let me create and play up to 16 multi timbral parts at one time so can have drums, bass, fx, and pads and the arpegigiator is super amazing! Thanks for this video. How would you program darkwave versus synthwave?

[@GlennMainMusic]

The Virus is an awsome synthwave monster too :-) If I should make darkwave i probably look for some cool fat pads with more motion to it, and some more "reverbed" textures as well... and use my keytar as the "guitar" 🙂

[@drefbert1100]

Merci

[@GlennMainMusic]

👍😃👍

[@keekeefries6298]

Brilliant video Glenn!! I really appreciate you diving into this synth and showing how someone would really use this to create some music. I take it this arrangement is all stored as part of the Scene? I’m also guessing you select which parts you activate on the keyboard at any given time for playing so you don’t play this drum sounds while playing the lead? Thanks!

[@GlennMainMusic]

Thanx for watching :) You can store it all in a «Scene» and you can also store multippel scenes with variations that you can trigger seamlessly non stop. On the right of the screen on the Juno there are switches to enable and disable the 4(5) tracks, and on the left side you press 1-5 button to chose what track you are playing :) So that’s where I switch between the piano and polysynth. You can of course switch on all 4(5) parts at once an play them as layers of you want. The reason why I refer to 4-5 tracks is that the 5. Track is the drum part :)

[@keekeefries6298]

@@GlennMainMusic very cool. Seems pretty intuitive. It is a bit strange that’s the step sequencer is inside the arpeggiator and not out on its own, but I think you are the only one on KZbin right now actually doing some in depth examination on how to build songs on this or set up arrangements for live play. Awesome job, and I look forward to seeing more!

[@zibbybone]

Thank you for this video. I just picked up a Juno X and the manual is a bit overwhelming. Since you have the JD-800 model expansion, could you make a video about editing a sound in that model? The JD-800 is my favorite synth (have had one since 1994), but it's too risky to gig with it. I'm wondering how easy it is to create and edit sounds with the Juno X's limited controls (compared to the JD-800) before spending the money on the model expansion. Thanks!

[@GlennMainMusic]

Hello:) And thanx for watching. In the Roland Cloud you can download the Juno X editor for free, and the JD800 editor as well. I did not try to edit so much except the “obvious” things like cutof and Amp settings.. but the editor looks really nice, and it gives a great overview of the synth. But I will sit down with it and try it out more in depth 😃😃😃

[@aceamadeus]

hi awesome video!! While playing JunoX, will it allow export of midi info via midi out the different notes created by i-arpeggio and drums?

[@GlennMainMusic]

You can record every track as midi files or audio in any daw over ISB.. if that answers your question 😃😃😃

[@aceamadeus]

@@GlennMainMusic Hi Glen, you mean USB? or do i use midi out into my cubase UR-22 interface? thanks! ✌️😎

[@GlennMainMusic]

@@aceamadeus 🙈 yes i mean USB 😃😃

[@GlennMainMusic]

@@aceamadeus - You can also use MIDI in/out from your Steinberg UR22 😃

[@aceamadeus]

@@GlennMainMusic thanks! 😎✌️🎹

[@chyyang3071]

Thank you. If you want to play it faster, how do you change the bpm?

[@GlennMainMusic]

Just set your bpm at the master clock level 😃😃😃

[@IasJazz]

Hi, great video! whether the sequencer is identical to that of Jupiter X?

[@GlennMainMusic]

Hello :) yes - its the same 😃😃😃

[@jacka55penguin]

Will it only do one measure of 4 beats? Can you string together scenes to make a short song?

[@GlennMainMusic]

Yes you can.. but then you should consider the Roland MC 707… that’s a great sequencer loaded with great sounds… :) The Juno X is not a workstation .. the sequencer is more a phrase thing, although you can of course chain scenes to make a song, but it’s not ideal 😃😃

[@jacka55penguin]

Sure it's not a workstation. But it's "features" are a bit of a head scratcher. It's so close to being cool. I personally think they should keep the architecture of the JD-Xi and expand on that concept by combining the juno-X "sounds".....You can't even record automation on the X. like you can the Jd-Xi. At least it's 5 part multi-timbral but that's really the only real feature worthy of note. It's got speakers nobody really needs. I mean why? It's got 2 headphone jacks. Silly

[@jacka55penguin]

And the fake chorus noise? That's the dumbest thing about this synth. it sounds awful. I pull it down. The original chorus is what gives those old Roland synths the character that made them desirable in the first place. I mean this isn't a cheap synth. You can buy an original Juno 106 for less that what this thing costs. But it does have 5 part multi. Shrugs.

[@SchubertDipDab]

Great video! 😁😁 It really annoys me how inconsistent Roland are with these arpeggio features - I mean my JD-XA has a similar programmable arpeggiator but I have no idea why they couldn't have included the same with the System-8 for example.

[@GlennMainMusic]

Thank you :) I wish they had a sequencer like the MC50/500 .. that would be awesome 😃😃

[@Wondermass]

The pluck sound reminded me of Save A Prayer a little. (Not sure what anyone might do with that information. Anyway, this was a really useful tutorial.)

[@GlennMainMusic]

Thank you so much:) Yes , I had the Duran Duran song in my head I think when I made this… because if you listen to the video before this one.. it was played different 🤣🤣😃

[@karlmarx4885]

Roland ❤👍☺️

[@GlennMainMusic]

👍😃👍

[@Raberje]

I learned a lot from this. Question, The Unison Bass stops playing when I play an upper key and then starts again when I release the key. How do I get the bass to continue to play? thanks

[@GlennMainMusic]

Thank you for watching, and a great question .. I’ve had the same issue myself for a while. But it is all about the settings in the “key range” edit. If the bass part goes higher than the actual split , then the bass part will think that it will play the note over the split point.. so then it just trigger an “empty” sound. So check out the key range edit 😃

[@Cororateguest]

I cannot figure this out. I followed your guide. Unison or not, if I try to play part2 (pads) in the key range I designated for it, part 1(bassline) will stop triggering. Am I missing something? I’ve set both key ranges to be in their designated areas. 🤯 🆘

[@jamesaita]

@@Cororateguest I SOLVED THIS PROBLEM!! Had the exact same problem. The video is missing a step!!!! You need to set the common range of the BASS to max at C4!. Then it works!!

[@jamesaita]

@@GlennMainMusic Help - having the same problem here - can't get the bass and piano/synth bit to play simultaneously.

[@mrrusty1965]

Glenn, any advice on what synth I’d need to add to my current portfolio of Juno-X and Juno DS88? When I asked the salesguy at Guitar Center about the Fantom-07, he said the Juno-X does the same except Fantom is a workstation. What say you?

[@GlennMainMusic]

I have not tester the Fantom-07 , so I am not sure… but I can say that the Juno X is a fantastic synth … no workstation.. but a synth beast 😃😃

[@justinrichards9625]

Is there a similar way to do step programming on Junk 106 (and get 106-spikes) ?

[@GlennMainMusic]

Im not sure i understand What you mean ..

[@ArtinRu]

замечательный обзор! привет с России!

[@GlennMainMusic]

😃😃😃

[@555atU]

I just picked up a Juno-X yesterday. You've had yours awhile now, so what is your overall feeling of it?

[@GlennMainMusic]

Congrats man ! I just love it - It has everything I can think of 😃😃😃

[@555atU]

@@GlennMainMusic thanks!

[@joseroldan1389]

Extraordinary tutorial !! Thanks. Could you make one in Spanish??

[@GlennMainMusic]

Thank you 🙏🏽 Well.. I don’t know Spanish unfortunately.. so I have to stick to the English 😃😃

[@dmian4546]

does it have a quantize function?

[@GlennMainMusic]

Yes , you set it before recording 😃

[@dmian4546]

@@GlennMainMusic thanks for the answer! i'm seriously thinking about buyimg this synth after many unsececssful buys. it seems to have everything i need. im quite sure it sounds spectacular but im specially interested in the step sequencer.i'd really appreciate any information about it thank you!

[@GlennMainMusic]

@@dmian4546 my pleasure 😃😃 A great Synth for sure 👍👍👍

[@dmian4546]

hi! you said that i does have a quantize function but i couldnt find any. last question. how many steps can i input? thank you for helping!

[@arekkx4]

super video.pozdrawiam z Aten

[@GlennMainMusic]

Thank you so much 😊

[@omegavisualbranding]

Oh men this is really a real time creative monster. I had the old Juno 106 and it sounds like it but this X just sounds more, but the price is too high for me. Exact the eighties sounds.

[@GlennMainMusic]

Just love This Synth :)

[@synthebo]

🤩🤩🤩🤩🤩🤩🤩🤩👏👏👏👏👏👏👏

[@GlennMainMusic]

Thanx 😃😃😃

[@thompi8]

its looks so damn easy when you doing it but i always fail with creating of aropiegos . i like all my synths have that posibilitys but roland vas easier when it has like what you say step recorder

[@GlennMainMusic]

To fly a plane is easy too when you know how to 🤣🤣 It’s all about getting under the hood of your synths.. I spent a lot of time learning by mistakes :) But I am getting there , and are more than happy to share my knowledge :) I discover new things all the time too 😃😃😃

[@maxkilluminati8278]

you look like Ronnie James Dio, with you he's incarnated as a synthesizer warrior! Great

[@GlennMainMusic]

🤘😎🤘 Cool - I like Dio too.. in my cover set I do “Holy Diver” 🤘😎🤘

[@ArtinRu]

я купил modx6, хочу juno стол

[@GlennMainMusic]

Thank you so much 😃😃😃

[@pauloyoshizaki2103]

ROLAND : JUNO - X : NEW MODEL : 2022 : NEW - ARPEGGIO : EQUALIZADOR - GRÁFICOS : RITMOS ; CONTROLLER : DIGITAIS ; ROLAND : JUNO - X .

[@GlennMainMusic]

😃😃😃

[@CR055FIRE]

wobble city

[@GlennMainMusic]

👍😃👍

[@CR055FIRE]

@@GlennMainMusic no

[@valuemastery]

Great video. Maybe time to invest in a solid keyboard stand? 🤭

[@GlennMainMusic]

:-) I do have the custom made JUPITER 80 STAND.. THATS ROCK SOLID.. BUT ROCK HEAVY TOO ..LOL

[@ArtinRu]

!

[@GlennMainMusic]

🤘😎🤘

[@ciatangallaghe2485]

I don't need two kidneys.

[@GlennMainMusic]

Its nice to have a spare one just in case 😂

[@bulentkamali]

The Fantom 6 is better than the Juno X

[@GlennMainMusic]

Well… it’s all about personal preferences 😃😃😃