Roland VT-4 Voice Transformer Review | 2022 Thoughts

[@ozzieverdugo5862]

Xlr isn’t a cleaner signal necessarily. A trs cable is also shielded. If you have a long to run then put a DI in line so you can shield the signal.

[@rbsenpai]

Hi! Did you have the chance to compare this device to the EHX V256 or the AIRA E4? If yes, what is your opinion on their vocoder? Thanks!

[@tonydavid9953]

Even tho you spoke of what you didn't like about the VT-4 watching your live performance only made me love it that much more that I can literally look past what you didn't like about it. Im glad I made my purchase and im looking forward to adding this to my home studio . Thank you for the video .

[@NefertitiGold]

Of course! Listen, I hear you. No piece of equipment is 100% perfect. And I still use the VT4 regularly.

[@operationnarcnemesis2383]

If I’m just a singer with no instruments do I need to hook it up to a keyboard, or anything,or can I just use microphone and speaker?

[@NefertitiGold]

No instruments needed, you just need to know what key you’re singing in for the best results

[@operationnarcnemesis2383]

@@NefertitiGold ok cool thank you do I hook my mic up to it then plug the vocal processor to the speakers?

[@anthonyhaywood2182]

Hi Nefertiti! Not sure if you were asked this question, but could you tell me the headset mic (Make and Model) that you’re using in this video? I like the sound and clarity, your review on the mic as well…. possibly interested in purchasing one.. Thank you for sharing…

[@NefertitiGold]

It was a Shure WH20XLR Dynamic Headset Mic ❤️❤️ there should be a link to it in the description in my amazon store front

[@fallingsounds3455]

The E4 uses a balanced TRS mic input (1/4" jack doesn't mean it's a line input). XLR isn't inherently better quality signal connection - TRS and XLR are both balanced signals. XLR is can be more secure and durable but the signal is treated the same in TRS and XLR cables.

[@NefertitiGold]

This is true, however for microphones I personally to use prefer XLR because they can carry balanced audio signals and also protect the signal chain from electrical surges. The two pins connect to the positive and negative wires, which carry audio signals, while the third connects to the cable shield, providing the protective ground connection. As the signal travels from one end to the other, the negative pin is out of phase with the positive. Because it is likely to pick up other noise, the signals will flip once it reaches the receiving end causing the signal to be put back into phase as well as cancel out any additional noise caused by radio frequencies that were picked up along the path, therefore delivering a cleaner sound. But everyone’s preferences are different 🫶🏾🫶🏾

[@seanp2k617]

the only prob with the E4 is no phantom power, so live with a wireless mic RX or a 57/58 you’re good, but the mic pres in these aren’t great anyway so it’s maybe not that big of a loss depending on how you want to use it

[@ChristopherEdmonds]

@@NefertitiGold TRS 1/4" is also balanced, the only difference is the connector on the end of the cable. It's not clear whether the line outs are in fact TRS (balanced) or TS (unbalanced) - the docs don't say. I'm going to open mine and have a look to see.

[@anonymous_friend]

Nice demo. What headset mic are you using? Have you fed the VT-4 midi to control harmonies? Thanks

[@NefertitiGold]

I'm using a headset mic by Shure! I've done some vocoder stuff through the VT-4 and it sounds GREAT

[@cloud9photography126]

Where can I find the full version of that song you sing in this video?

[@NefertitiGold]

It's actually a demo of a song I plan to write and release 😁 Once it's out, I'll definitely make mention of it

[@realestjeremyhamel]

Hi Nefertiti! Awesome review.. One question: what's the song/artist playing in your intro?

[@NefertitiGold]

It’s actually my original song! It’s available on streaming! Nefertiti Gold - One Try (feat. Daniel G. Harmann) distrokid.com/hyperfollow/nefertitigold/one-try/

[@realestjeremyhamel]

@@NefertitiGold Awesome! I just downloaded it on Apple Music

[@concept974]

Hi, two (silly) questions : - can you use any usb wall plug to power this unit or must it be plug to a computer ? - can you plug the jack out to a mixing table or is it not the way to do it ? Thanks for your time :)

[@NefertitiGold]

I’m not sure about the mixing table but I’ve tried it with a wall plug AND plugging into my computer for power and it still works effortlessly. I just posted a new performance video using the effects live and it was plugged into a USB hub for power.

[@gregorysayegh]

question : can you sync tempo delay ? or you only have 4 presets and thats it ? i just didnt like the delay tempo that comes with it ... would appreciate an answer thank you!

[@chinchafay8595]

this is great! Thanks for the review video :)!! Was thinking of getting one as well, looks like lots of fun to use as a vocalist :)!

[@NefertitiGold]

It really is!

[@kittymars]

Can this be plugged into studio monitor speakers and you sing while playing acoustic instruments? Or does it need to go through an interface ?

[@kittymars]

I’m a noob ❤

[@NefertitiGold]

yes! there are 1/4in outputs.

[@kittymars]

@@NefertitiGold appreciate you 🫶🏼🛸

[@PlasticParallax]

I've had my VT-4 for a few years now but recently, i cant get any sound out of it. Not sure if it's user error of me not having the settings right or it just kicked the bucket. :(

[@tikblang1]

can you use this device to remove the vocals from line input while singing live and mix my own voice via a shure microphone? the idea is I want to sing "Perfect" and only use the instruments and remove (or suppressed) Ed Sheeran's vocals. If not, is there any other appliance (or application from a laptop) that can do? I just want to start singing and playing guitar and I don't want to do lip syncing from a recorded song.

[@twiglet2214]

Just got mine and came across your review Nefertiti and loved your vocals - beautiful ,thanks for sharing. What model is the Shure headset mic btw - sounds great !

[@NefertitiGold]

Thank you so much! It's the Shure WH20 Dynamic Headset mic

[@twiglet2214]

@@NefertitiGold Ok thanks Nefertiti Gold i will investigate forthwith this little treasure and give our love to King Akhenaton xx

[@jeffersonsims2073]

I'm not a singer.... but I like effects...

[@FluxStage]

Just ordered mine! Thanks for your thoughts!

[@kroadchronicle]

Thanks. Great video.

[@petersonjeanjacques9092]

Thank you 🙏🏼..great reviews

[@NefertitiGold]

🫶🏾🫶🏾🫶🏾

[@bryanwildes6417]

thank you very much!

[@MrKalem6572]

For the xlr out problem, using top quality balanced phono cables will give a decent performance.

[@qu2r3en]

exactly its a TOTAL NO PROBLEM

[@harshendraacharya7270]

Can this device transform voice on live calls or podcast?

[@NefertitiGold]

Yes, you can change effects live! I just posted a new performance video where I change the vocal effects on the fly

[@RudeCanine]

Dang Eggslr cables

[@mzmlive1336]

VT4 it is! thanks!

[@donaymo]

Hey am from bandlab,nice work

[@gorogne]

Unfortunately, the device makes quite a lot of noise.

[@MarkDavidBlack]

What kind of noise? Like static? I was thinking about buying it. But if there's noise in your headphones that's going to be a problem.

[@gorogne]

@@MarkDavidBlack It's a background noise. Heard even more when compressing.

[@NefertitiGold]

I just posted a new performance video using this unit live.. I personally don’t hear any static from unit? But please lmk if you do, my ears may be lying to me! 😩

[@gorogne]

@@NefertitiGold Try a compressor. Then you hear the noise even more.

[@criticdecocalarizz1507]

robot voice ! nice ? :)))))) ha ha ha....