Rolex Submariner Ceramic Bezel Pearl Pip Repair / Replacement

[@waynenicholls6362]

What an absolute find. I was hoping to find an answer to what glue to use and as a bonus I found how to fit. Thank you very much 👌

[@dinstaar]

Super glue works too. Just apply very, very little with a toothpick. It's bond is stronger and easier to come by.

[@tatarugabriel4328]

​@@dinstaarI glued mine with super glue too. I kinda went crazy with it but I doesn't really matter cuz you can just scratch the excess with basically anything, it's ceramic after all.

[@dinstaar]

@@tatarugabriel4328 Yeah, superglue is great stuff for this. I have done it that way too. I just apply it with a toothpick. It is pretty easy. I can't believe people have Rolex do this to be honest.

[@tonyfontana8222]

Thank you! yous saved me a $1,000!

[@Dr.Gunsmith]

I had the same problem on my 2021 Rolex no date, all the different pips I bought would not fit exactly.

[@mmm2710]

no meu caso se cair o pip eu estou pensando em comprar tinta fluorecentes e preencher o furo com tinta

[@Taylasto]

You’re great thank you. Words cannot describe how angry I was that I knocked this off 😂😂😂

[@dinstaar]

Yeah, it happens more than it should. I was pretty upset when it came off and I lost it, even more upset when I found out what it would cost to get this simple thing repaired. I have also used super glue applied with a toothpick with great success.

[@bbb345sddf]

Great video same thing happened to mine and now I know how to fix. Thank you-

[@briandonovan2954]

Great job!! I just did a similar repair.

[@ytbbty7885]

How do you clean the cerqmic, i washed mine with soap, but it left water spots that wont go away

[@dinstaar]

For regular cleaning I use dawn dish soap and a toothbrush, then wipe it off. Some soaps leave spots of you don't rinse them enough, and like a car, wiping it off prevents spots. To clean the surface before gluing the pup, rubbing alcohol. FYI, some viewers state that super glue works even better for this repair.

[@jesserandall9792]

Awesome! I just followed your steps using the same tools and viola!

[@dinstaar]

Kinda fun wasn't it?

[@jesserandall9792]

@@dinstaar I was a bit nervous initially. Then I realized there was nothing to it, when you have clear instructions and all the correct tools. :)

[@dinstaar]

@@jesserandall9792 Since there was no existing video before mine I was pretty on edge when it came time to use the Dremel to clean up the hole. I just figured, what do I have to lose? If I screw it up I gotta buy a new one. If I don't try I gotta buy a new one. Lol.

[@zepolbeatz5195]

Hello, first thank you for this video, I had the same problem recently, where did you buy the pearl? Thanks you

[@dinstaar]

www.amazon.com/Turquoise-Insert-Submariner-Ceramic-116610/dp/B084YZNQKC/ref=mp_s_a_1_5?crid=30H2KXY4Q3P4N&keywords=pearl%2Bpip%2Bsubmariner&qid=1639340936&sprefix=pearl%2Bpip%2B%2Caps%2C413&sr=8-5&th=1&psc=1

[@splkzyy]

I have a question, my Rolex submariner hulk, fell a few days ago the clasp gave away cuz of the bolts not being tied enough. so the inner triangle and circles fell, any way to fix them back?

[@dinstaar]

Not to be offensive, but that doesn't really happen with a genuine Rolex. A Submariner is a tool watch and tough as hell. Your parts were most likely replica parts or aftermarket. I would replace the clasp, or bracelet, with another aftermarket or replica one. These can be found online on sites like AliExpress or Dhgate.

[@adriankemsley7046]

Hi there - I have a James Cameron sea dweller. The pearl has been knocked out, but the surround is still intact. I didn't realize it the whole pearl holder was removable. How would you suggest I remove mine as it looks pretty secure in the bezel?

[@dinstaar]

You will likely have to replace the entire bezel insert.

[@adriankemsley7046]

@@dinstaar Thanks for getting back to me - how should I remove it?

[@dinstaar]

@@adriankemsley7046 use the search bar on KZbin.

[@61Husky]

Great video! Thanks a lot 🙏🏽

[@israelmunoz1056]

Can you please share the replacement pip / pearl that you used? I have the same problem today and am looking to fix it.

[@dinstaar]

Get the one by HNS on either eBay or Amazon.

[@MrThommyy]

How is the height of the pearl? Is it for the 114060 or 124060? And do I need to „drill“? Or can I just do it with glue?

[@dinstaar]

Well, you can try a test fit your and see if drilling is necessary or not. Mine was pretty close but as you can see, I had to open that hole up a bit to get it to seat right. The height of the pearl is perfect. It is the same as it was originally. The model of this Sub is 116610, it would he the same for the no date 114060. I have also done this successfully with just a tiny dot of super glue applied with a tooth pick.

[@alvarotempesta5860]

Te felicito x el primer mod de su marinero, ya en varios de mis diver les he aplicado lumen x mi mismo. Además de ese pegamento aplicar barniz sin diluir resulta altamente eficaz ha su vez al menos en los de nicel de aluminio una fina capa de barniz brillante los hace brillar y protejer la pintura de rayones🤟🇺🇾

[@dinstaar]

This bezel insert is ceramic so there is no need for varnish. It already shines😀

[@MarsMan1]

Good Job!

[@dinstaar]

Thanks

[@santoshadhikari8663]

Mate , does that pearl pip works for Rolex 116613LB ? If yes where can I buy them

[@dinstaar]

@@santoshadhikari8663 yes it does. Use ebay or amazon.

[@ttaglienti25]

how did you remove the pearl? mine is cracked and I don't want to scratch the bezel removing it

[@dinstaar]

Well, mine came off by hitting a door jam by accident with my wrist. Lol. You will not scratch the bezel if it is ceramic. However, use caution not to break it, it may crack. The pearl is pressed in so depending on how hard you hit yours, it may be loose enough to gently pull out with tweezers or it may still be stuck in there very firm.

[@jamesbyrontaduran3738]

Hi Mate, great video very timely. May i know the link of the seller in Amazon? Got a 2021 No Date Sub and i lost the pearl.

[@dinstaar]

Sure. By the way, I have done a couple more of these repairs and have switched to Super Glue. It is cheaper and easier to come by. I just use a toothpick to apply it over the hole. Use a very, very small dot. It holds even better. Here is the Amazon link: Pearl PIP Green/Blue/Turquoise LUME for Bezel Insert for Rolex Submariner Ceramic 116610 Silver a.co/d/i6keTNp

[@Taylor.Murray]

How it holding up after a few weeks? Any regrets or advice if you were to do it again any differently?

[@dinstaar]

No issues at all. It's holding up great. I would not do it differently as the only other option is extremely expensive. It looks exactly as it should and from what I have read the GS Hypo is what watchmakers have been using for a long time to attach date magnifiers and for use on other jewelry. I really don't see this fix ever failing.

[@MrThommyy]

Which size was the drill you used? 😅

[@dinstaar]

It was pointed with a cone shape. Meaning the deeper you go, the wider the hole. That is how many diamond bits are shaped.

[@1997LT1Camaro]

Did the glue spill over to platinum into the upside down triangle?

[@dinstaar]

No, not at all. Just be careful with it. This GS Hypo Cement is easy to not over apply the glue. Additionally, I did this job another time with some clear 2 part epoxy. I had to be careful when applying it but the job went fine. To be honest the epoxy was cheaper and worked just as good. Just remember, a little goes a long way and you'll be fine.

[@DeanCameronAmeri]

Hi, thanks for putting this up! Do you have the 116610 or 126610? And did the pearl pip have a pin in the back to plug into the bezel? Also can provide the Amazon link?

[@dinstaar]

This is the 11610. Buy the turquoise, not the blue. It does have a small post in the back of it. It has also come to my knowledge that a clear 2 part epoxy would do well for this job too and would be easier to come by and even stronger. Epoxy may be a bit more difficult though as it would not have the fine applicator tip. Amazon link: www.amazon.com/Turquoise-Insert-Submariner-Ceramic-116610/dp/B084YPYXG9/ref=mp_s_a_1_5?crid=30H2KXY4Q3P4N&keywords=pearl+pip+submariner&qid=1639340936&sprefix=pearl+pip+%2Caps%2C413&sr=8-5

[@michaelcuddy442]

Hey mate have you ever changed one rather than just put one on my bezel pearl is scratched and lost its glow a bit so need to change it so take the old one out and put new one in, I watched this video and done it on my deepsea and this video really helped and saved me lots of money lol so if you have got a video of actually changing on rather than just putting a new one in I'd appreciate it

[@dinstaar]

They are pressed in. To remove and replace one you would have to remove the bezel insert and press it out from the back.

[@michaelcuddy442]

@dinstaar OK mate thank you I've seen videos on removing the bezel it looks quite easy so I'll give it ago, what could go wrong if I do it though mate or is it pretty straight forward

[@dinstaar]

@@michaelcuddy442 If it is the new ceramic bezel be very careful not to break or crack it. They are very scratch resistant but the crack and break easily.

[@michaelcuddy442]

@dinstaar OK mate cheers and thank you for your help I'll give it a go wish me luck lol

[@michaelcuddy442]

@dinstaar on more thing mate if I take the bezel out and push the pearl out of it is there a possibility it will break being ceramic?

[@b5rider]

Anyone know how to remove the pip/pearl including the metal housing? My pearl is cracked, but the holder is still in place

[@lifeofreggiewoods]

having the same problem. my pearl is lost.

[@jcanto377]

Thank you!!!

[@Fripajetto]

I would ask my ad to replace the bezel pearl . You make sure is a genuine one and they will do perfectly

[@dinstaar]

Then you will be disappointed in your options. They will off to send it to Rolex and your watch will be gone for a couple of months. Rolex will replace the entire bezel for $700. If you are not comfortable doing it yourself a local watch Smith could do it, but it won't be cheap that way either.

[@darrinlillian]

Congrats on a successful repair. Watching your video made me nervous as you didn’t remove the bezel from the watch which I would recommend.

[@dinstaar]

I left in in the bezel because I knew it would be held firmly in place and not wander. I think it would be riskier removing it.

[@dtaylor9501]

Anyone done a 126610 PIP, not sure what size I need

[@jamesneesham8046]

This is awesome! Thanks for this, can I ask where on Amazon you got the bezel? Can’t find the right one I have the same watch so

[@dinstaar]

There are 2 companies that sell it. Ewatchparts has the incorrect lume and it is dark blue. Get the one from HNS and select the turquoise color.

[@andrewmcmanus7055]

@@dinstaar Confirming that this is the pip you're talking about. www.hnswatchstrap.com/index.php?route=product/product&product_id=928&search=pearl+pip&description=true&page=2 Thanks!

[@dinstaar]

@@andrewmcmanus7055 Yes it is. Also, for your knowledge I heard that 2 part clear epoxy holds even better, cheaper, and is easier to come by than the GS Hypo Cement. It is something I use all the time in my shop but did not think about it when I did this repair. I use epoxy all the time and wish I would have used it for this job. The holding power is much stronger. It may be a little messier to apply though, the GS Hypo's applicator is great.

[@hectorguzman4490]

If it’s a 2014 model basil can be removed from the outer metal

[@dinstaar]

Yes, however CAUTION!!! It can be difficult to get it back on.

[@navegandolejanooriente6268]

This just to my sub, only had it less than a year.

[@dinstaar]

Yeah, I wish they would follow Omega's design. Rolex has their pearl sticking out like a mountain off the bezel. They are asking for it.

[@franciscovillagrana3103]

Sir can you please put on the link on your video.

[@dinstaar]

For what specifically?

[@franciscovillagrana3103]

Pearl pip for Amazon.

[@dinstaar]

@@franciscovillagrana3103 Pearl PIP Green/Blue/Turquoise LUME for Bezel Insert for Rolex Submariner Ceramic 116610 Silver a.co/d/jfJQ7nh Make sure you buy the turquoise for the 116610

[@franciscovillagrana3103]

Thank you sir. I just placed my order. Very frustrated. If this is issue is so common I feel that the manufacturer should cover the cost of resolving this issue. My dad had the same issue on his and paid 650.00

[@dinstaar]

@@franciscovillagrana3103 No problem. I have also had success using original super glue applied with a toothpick. The bond with that is even stronger.

[@SwagManCharlie]

Hello how remove the pearl please

[@dinstaar]

Why in earth would you want to? You have a very high chance of breaking the ceramic bezel. Mine came off my smacking my hand against a door jam just right by accident. I would not recommend that method.

[@henrysimpson5995]

@dinstaar mine came off the exact same way 😂

[@richardalvarez3655]

So I bought the exact same pearl and glue you did after seeing this video. How ever I feel like the pearl is not the same pearl as the actual Rolex pearl. I have the hulk and if I can remember the pearl was more now profile and the one I got from amazon from the seller recommended seems like it protrudes higher and is more rounded than the original. ?????

[@dinstaar]

The pearl in the newest models is lower. The pearl for this model is identical.

[@richardalvarez3655]

Aaahhh ok. Do you know where to get the newer stile pearl

[@dinstaar]

@@richardalvarez3655 I have good luck on ebay. I have never sourced one myself.

[@MrThommyy]

It looks quite blueish without lume instead of whiteish. Is that always the fact or only due to the video/angle/lights whatever?😊

[@dinstaar]

Must be unequal exposure to light since they were separate pieces. The pearl is lumed the same as everything else. Installed and exposed to the same amount of light it all glows equally all night.

[@MrThommyy]

@@dinstaar and during the day? Does it look the same?

[@dinstaar]

@@MrThommyy It looks 100% original. I cannot tell the difference between the Rolex pearl and this one. Go for it! By the way, super glue applied with a toothpick does even better!

[@aiteerawattian-ng5686]

i you send me link for this pips ?

[@johnsmithe498]

You have big balls I just knocked mine off I’m scared to do this! Lol 14k watch now…

[@dinstaar]

I know man. I thought of it like this though, I work on my truck and it is worth way more. Also, you don't have anything to lose. Where it stands you you need a new bezel insert. If you screw up, you need a new bezel insert. You would think Rolex would recess that a little, setting it where they do is asking for this to happen. The only thing that made me nervous was using the Dremel to clean out that hole so the new pearl would seat perfectly flat. That ceramic was way harder than I thought it was so don't be too scared. Also, the bit is already in that tiney hole so it doesn't wander at all. If you give it a go, let me know how it turns out. A few people have commented this method has worked great for them!

[@snapascrew]

My AD got me a new bezel for $50 and didn’t send the watch to Rolex. $700???

[@dinstaar]

No a new bezel does not cost $700. Just the insert does!!! There is no way you got ANYTHING from Rolex for $50 bucks. Most likely your jeweler works with a local watchsmith (most do for quick and small repairs), and you paid to have this exact same thing done.

[@The69bombero]

Brave

[@dinstaar]

Well I am a mechanic. I figure I work on vehicles all the time that are more valuable so I went for it.

[@Anonymousdethroned]

Mine fell off 2 times after i used this glue. I'm gonna try locktite this week.

[@dinstaar]

Good luck. I have also used a clear 2 part epoxy with success. It is not as easy to apply but holds stronger.

[@Anonymousdethroned]

@@dinstaar how do you apply if you don't mind me asking?

[@dinstaar]

@@Anonymousdethroned I mixed the 2 parts on a piece of plastic near me. I like the clear 5 minutes epoxy for a good workable time and relatively quick dry time. I then used my tweezers to flip over the pip and hold it. I used a toothpick to apply the tiny amount necessary. Be careful, this method is not as easy, it can be messy and frustrating. If there is any reside after it can be picked off of scraped away. I use one of those plastic toothpick/flossers. It ensures I do not scratch or damage anything.

[@dinstaar]

For a follow up, I have done some research and found E6000 does an amazing job on this repair. It bonds strong, remains a bit flexible so it is impact resistant and 100% waterproof. If you are having issues with it falling off still ensure the surface is super CLEAN. Wipe it down with acetone or rubbing alcohol first.

[@Anonymousdethroned]

@@dinstaar ive had good luck after using the epoxy months ago. It's still hanging on with daily wear.

[@steveguaico1024]

I own a sub 116610 , if this ever happens to me, I would not touch it and have a reputable place to fix it, yiu got big ones brother, great job, ( just my personal opinion) dealing with an amazing time peice it’s to much risk to take….., great job

[@steveguaico1024]

Took my dislike back, lol

[@dinstaar]

When I read the forums they said that Rolex would want to replace the whole bezel. So since this happened, I had nothing to lose. The only thing I would screw up is the bezel. I figured since Rolex would just remove it and replace it, I may as well try. I read a couple of people had luck doing this repair but there was no video on it anywhere I could find. I made this because it is not too uncommon for the pip to get banged off the bezel. Besides, I am very mechanically inclined. I have been repairing vehicles for 20 years that are more complex and expensive than my watch. Why not try? I read my comments and a couple people followed my instructions with success. I hope it doesn't happen to you, but if it does, don't be too scared. I am not going to lie though, I was pretty nervous when I had to stick that Dremel in that little hole to clean it out a little.

[@sonnycorinthos9461]

Did Rolex tell you it was $650? Mine needs to be replaced.

[@dinstaar]

I read it on a Rolex forum. Members were saying Rolex would only replace the entire insert and that was the charge. It is not an uncommon issue on this model. Someone else suggested this DIY solution and I wanted to try it before throwing that much money at the problem. As you can see the insert is fine, I just knocked the pearl out. I figured I would give it a shot. If I messed it up I would take it in to Rolex. This worked out great.

[@sonnycorinthos9461]

@@dinstaar thanks for letting me know. I spoke with a Rolex service center here in Texas and they advised me that they can replace the pearl only. She said that the parts cost for the entire bezel on my 16610lv is $150 so the pearl alone would be less, but she couldn’t give me a price on labor.

[@dinstaar]

@@sonnycorinthos9461 oh, you have an aluminum bezel? Ya, WAY CHEAPER. This repair can also be done on a bezel like yours for about $15 and no special tools. Same procedure and you probably won't need to dremel. The hole on your is large compared to mine.

[@Outdoorshuntingshooting]

That made me nervous.

[@Loyer333]

Much better to do this with the bezel removed from the watch. If you use too much glue (as you did) your bezel will not rotate when it dries. With the bezel off, you can remove the excess glue from the under side and allow the bezel to rotate once all is cured. Etsy and ebay carry these pearls/pips.

[@dinstaar]

My bezel turns fine and there is not too much glue. It looks and works perfectly. I watched a couple videos on how to remove the bezel. I was unsuccessful in doing it. I decided to give it a go with the bezel on. As you can see it is possible. Trust me, I wish I could have gotten that damn thing off. It would have been easier.

[@jlo8775]

The horror 🤦‍♂️

[@mauriziodimattia583]

🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️😖

[@hardilghotra632]

Same thing happen to me on the same watch ref number 116610LN