Roll Pan Install on the S10

I am not a professional. This video is for entertainment purposes only. I am not sponsored by any company mentioned in this video. I did this install based on my own research and used my own money to purchase the products.
In this video I install the roll pan on the first gen S10. The roll pan part link, tools, and hardware that I used are listed below as well as the mics that I talked about in the video. Thanks for watching and don't forget to LIKE, COMMENT, and SUBSCRIBE.
Links to part, tools, hardware, and mics
Roll Pan
ECOTRIC Rear Bumper Roll Pan Compatible with 1982-1993 Chevy S10 GMC S15 Sonoma W/Light Pickup Steel
www.amazon.com...
I used (2) 1/4" x 20 thread x 1 1/4 long bolts with nuts - Local Hardware store
Harbor Freight Riv-nut tool
www.harborfrei...
I used (5) 1/4" x 20 thread x 1" long Phillips head bolts - Local Hardware store
1/8" drill bit for pilot holes
11/32 drill bit for riv nut hole. This will be a very tight fit and you may have to "massage" the hole a little.
Hollyland Lark M2 Wireless Lavalier Microphone for iPhone 14/13/12, Lightning Mini Lapel Microphone Wireless, Hi-Fi Audio, 1000ft Range, Noise Cancellation, 30H Battery for Video Recording, Streaming
This mic is for iPhone, but you can order one that is USB - C and for camera connections as well....listed below
iPhone with lightening plug
www.amazon.com...
USB - C
Hollyland Lark M2 Wireless Lavalier Microphone for iPhone 15/15 pro/15pro max/Android, Hi-Fi Audio, Mini Mic, 300m Los Range, Noise Cancellation, 30H Duration for Vlog KZbinr-Black
www.amazon.com...
Hollyland Lark M2 Wireless Lavalier Microphone for iPhone/Android/Camera/PC/Laptop with Lightning/USB-C/Plug, 48KHz 24Bit, 1000ft Range, Noise Cancellation, 30H Battery for Video Recording, Streaming
www.amazon.com...

[@yourpcmd]

Thanks brother for another great video! Always makes my day to see new content from you.

[@dtperformance256]

@yourpcmd I enjoy making videos. Thanks for watching and much thanks for the super thanks. The support is greatly appreciated!!

[@thisoldhooptie]

Hey bro, the new microphone sounds great! Also, every time a bumper is removed, then replaced with a rollpan, the driver gets a year of good luck 🤣. 👍

[@dtperformance256]

@thisoldhooptie 😂😂 I could sure use the luck for sure!!! Yeah I was impressed with the mics and wished I would have had them when I started the channel!! As always thanks for watching and the comments!!

[@andersonrowland]

Good video, thanks!

[@dtperformance256]

@andersonrowland Thanks for watching and commenting!!

[@allencobbs4047]

Ps glad to see you back

[@dtperformance256]

@allencobbs4047 Thank you. Glad to be back. Had a lot of life going on. I hope I am back on track and can get some stuff done on the truck with videos to show!

[@jeffallen3382]

Congratulations!

[@dtperformance256]

@jeffallen3382 Thank you!!

[@allencobbs4047]

Same eBay pan I used cut it at both ends on the part that mounts under the tailgate and you can bend that down it slows the tailgate to swing open and that will allow the pan to come up higher and match body lines I have less than a 1/4” gap and tailgate opens and closes no interference

[@dtperformance256]

@allencobbs4047 Thanks for sharing! This thing had me aggravated trying to hold it and mark everything. Now that is on, I will go back and look at what you are saying. How did you secure it underneath?Thanks again!

[@allencobbs4047]

I attached to the bed like you did but having kit the end that part mounts lower so the part under tailgate runs down hill and the ends are welded to bed work out good and yes I did mine myself it was a pain but it’s worth it for the body lines to match and still use tailgate

[@dtperformance256]

@allencobbs4047 It was a pain but worth it…totally agree.