Rolls Royce Ghost air suspension compressor swap with a BMW 7 series air suspension motor.

everyone no need to waste money on an expensive rolls royce air suspension pump. you can follow my video and swap it out with a 7 series version 2010 -2016. There were a few modifications I had to make, but I thought they were simple.
1 you can swap out the back tail of the motor if your rolls royce motor back is still good. or you can cut the wires and swap them out that way.
2 you will have to remove the compressor temperature wire and place it in the BMW dryer head. then you will have to use a drill to Drill a hole. I use 11/64. I think the head is aluminum so it is pretty easy to Drill
3 had to use the rolls royce dryer housing in place of the BWM housing body because they were different.
I love that my Royce has BMW parts. easy fix. I also replaced my valve block in an other video.
if you check the power coming to the air suspension compressor relay and find that you don't have 12v. take a look at the end of this video. you will be happy u did.

[@YUCCAA]

The housing is different but it can be swapped out . Not gonna need the temperature sensor

[@hstaff3336]

The question I have is can you fit Rolls Royce suspension components on a BMW?