MAKING A PENDANT - WOODEN JEWELERY

[@HollandWoodWorks]

Your videos are such a pleasure to watch. The zen energy is wonderful. Thank you for creating this content, and thank Lies for adding so much as well!

[@robertcornelius3514]

Your tool work has improved.

[@JohnSmith-il4wi]

I like that you show all the catches and grabs and wood farts, and not edit them out.

[@hfbowerndesigns810]

Thanks Ronald for the demonstration. I like the chuck idea, easy to do Take care Seasons Greetings Cheers Harold

[@northernhumidor5615]

That chuck to hold the pendant is pure genius. Love it! Great video as always.

[@max.fleming1045]

I'm jealous I didn't think of that jam jaw chuck Ronald. What a brilliant idea!. Never made such a pendant, but I've turned many a small box lids etc and had more than my fair share of traditional jam chuck failures. I won't forget that in future, thank you !.

[@SpunbyGreenJeans]

Very nice. Thank you for sharing.

[@garyjanes2358]

Excellent, Entertaining, and fun! And exquisite product!

[@peterfabricius662]

Very simple and effective jig for turning these pendants. Nice! I have turned a number of offset pendants on my off centre jig and double faced tape. But this is genius and easier. Well done.

[@yagookie]

i have made something similar in the past with double sided tape , with moderate success , love this idea. thank you for sharing and having so much fun while you are doing it. love your channel

[@RupertThomas-p1d]

That's a lovely design, and I really like the double-sided "chuck" with the eccentric option. I've been cautious about eccentric turning because my lathe is small and it flexes badly when turning something out of balance - this resolves that problem in one easy move! Once again you are a source of inspiration and humour that is most welcome!

[@johnwoods9995]

Very very cool Ronald, a nifty creation which I wished I'd seen earlier to make for my 18 grandchildren coming for Christmas next week. I'll put this idea aside till next year. many thanx and merry Christmas to you.

[@mirco.0414]

Another outstanding video! Great pleasure to watch!

[@bradwiebelhaus7065]

Great video.

[@canal-9389]

Ich bin ganz begeistert. Nicht nur von dem wunderschönen Anhänger sondern auch von der originellen Herstellung. Bravo!!!!! 🎉

[@DustanBadovick]

Great work Ronald!! Thank you for making this for us to enjoy.

[@Hog-g2z]

Good morning 🌅, very nice pendant, , from friends,

[@ronaldkanne]

thank you!

[@richardcole7400]

Cool chuck, cool product...hope I'm not cold this Christmas if I've reclaimed all my firewood offcuts! Best to you both.

[@woodndrum303]

Superb careful work-exquisite piece of jewellery anyone would be proud to wear. Video is crammed full of interesting tips and techniques. Thanks,

[@GeraldJensen]

Very good video ... professional presentation and expert photography (thanks to Lies!).

[@earlbishop2314]

Beautiful pendant, you’re very talented and creative. Thanks so much for sharing your knowledge. Take care and stay healthy and safe.

[@mickjulian7499]

That's a lovely design and a very useful technique, thanks Ronald.

[@carolriley8472]

Very nice!

[@alanwasserman8176]

Ronald a great looking pendant 👍

[@frankvanderwal4571]

Wonderful Ronald. Very nice pendant! Let me give it a go and see if I can scale it down even more to make two earring pendants to go with it. Will be fiddling but hey no pain no glory. Happy Christmas for you and your beloved ones, cheerio, Frank

[@ronaldkanne]

@@frankvanderwal4571 u2 Frank! Happy Christmas!

[@dirkvanbesien]

Weer een mooie! Ik plan er ook te maken voor de vrouw en dochter.

[@MichalisCholevas]

Beautiful, thank you Ronald!

[@albertdawson6814]

Very nice Ronald. Thank you for sharing. See you on the next one

[@roysmeets6460]

Schitterend.....dankjewel!!!!

[@jamescarter8813]

Great project Ronald. I have an off-center shuck, but don't like using it because I have to use double-sided tape. I like this method, and will play with it to see if I can do something with the off-cuts that I have. Thanks for showing the process.

[@corienwarmerdam5648]

Gaaf Ronald, wat een geduld! Wel leuk om eens te proberen.

[@fern6114]

Excellent quiet work of master Ronald, salü from Luxembourg 🇱🇺 part of Benelux 😊

[@garychaiken808]

Great job guys. Thank you 😊

[@jodyjohnson3146]

Very creative. I always enjoy your videos.

[@nicooosthoek1502]

Free tip, use a pipe cleaner for the grooves. Nice video Ronald.

[@benjaminmaneywoodturning]

Hey Ronald, when you did your impression of friction, my dog sat up and replied with a funny little bark- i didn't know you could speak in hound language. Great video!

[@ronaldkanne]

well, i tried to keep that a secret... but now you know... :-)

[@oldcharlie5533]

Thank you..that was very informative. I will have to try that.

[@scottmedori1437]

Very nice piece.

[@mikehooper3392]

Fantastic job I will attempt this

[@williamfawkes8379]

It sounds somewhat like a tortured clarinet. This is a very interesting project, and also beautiful.

[@ronaldkanne]

I don't know, I never tortured a clarinet... :-)

[@williamfawkes8379]

@ronaldkanne Somehow, I knew you would say this. ;-) But the music in the video had clarinet, and it sparked the comparison.

[@AwAtA2k]

Mal wieder ein großartiges Video, Dankeschön und grüße aus Deutschland😊

[@glencrandall7051]

You can't see me in your next video but I can see you. Nice pendant. 🙂🙂

[@Bunk599]

Nice and clever (both you and the piece). Merry Christmas

[@ronaldkanne]

Merry Christmas to you Bunk!

[@dakotamax2]

That jamb chuck will be reusable and the grooves on the eccentric side will serve as a template for batching.

[@ronaldkanne]

@@dakotamax2 yes completely right! So it becomes easy to do series pendants this way... 😀

[@paulplager9498]

Great idea for the jam chuck. You are smarter than you look. LoL. 😂. Thanks for your videos and ideas.

[@ronaldkanne]

hahaha! if i was as smart as I look I would never had started woodturning... :-)

[@fern6114]

@@ronaldkanne😂

[@rudlterranigma5386]

I had no idea unil min10 how this a fit together 😂 great clip!

[@allanjgray1]

nice one !!

[@walteri.3741]

Super, dass es als Audio übersetzt wurde, die Übersetzung ist zwar auch nicht besser als die schriftliche, aber man kann sich voll auf das Video konzentrieren, und muss nicht ständig die Untertitel lesen, was dazu führt, dass man einiges übersieht. Einziger Nachteil: Der Charme und der Witz deiner Stimme geht verloren!😁🤣 Qualität der Darbietung: Super, wie immer - Danke!

[@Ukenick]

Thanks Ronald. Great video. Can you tell me what live centre you are using in the tailstock. I can't fin anything like it. Thanks

[@jimgeelan5949]

Hi Nick, look for a cup live centre 😊

[@ronaldkanne]

It is made by Oneway from Canada. search for "Oneway livecenter 2064"

[@Ukenick]

@@ronaldkanne Thanks so much Ronald.

[@Asafzarbiv]

Great video! Definitely trying this one 😊 Also What lathe do you have?

[@ronaldkanne]

@@Asafzarbiv this is a Robust American Beauty...

[@NBCRGraphicDesign]

Robust Dutch Beauty....

[@ronaldkanne]

@@NBCRGraphicDesign that's me... 🤣🤣🤣

[@hobbyist7688]

Die ga ik ook een keer proberen, duidelijke uitleg. Heb alleen een vraagje, waar kan ik bv olijfhout kopen ? woon zelf in zuidholland maar kan hier in de omgeving niets vinden

[@ronaldkanne]

Bij mij! 🤣 www.dehoutdraaierij.nl/shop/venetiaans-olijfhout-481#attr=3295 Maar je kan ook een andere houtsoort pakken hoor! Als het maar dicht en hard is. Haagbeuk of taxus zou het ook kunnen doen...

[@hobbyist7688]

@@ronaldkanne Oehhh , die zag ik niet aankomen. Ga even op je site rondneuzen

[@PavelKalinkin]

👏👏👏👏👏👏

[@piccoloswoodwork5640]

Danke Ronald für das schöne Video und Tolle Projekt wie würdest du eine Kette oder Lederband befestigen Grüße Herbert

[@ronaldkanne]

Kleine Ebenholz kugel drauf mit ein Loch drin... und das soll noch vor Weinachten passieren! 😆

[@piccoloswoodwork5640]

@ Dankeschön wünsche dir und deiner Familie ein schönes Weihnachtsfest

[@ronaldkanne]

@piccoloswoodwork5640 gleichweiss!

[@basbarthen]

How much for that drilling machine?☺

[@ronaldkanne]

it is priceless...

[@basbarthen]

@ronaldkanne 🤭

[@michaelhansen6481]

🤘🤘👍

[@lydiarol7892]

Er zit een kerstengeltje in

[@ronaldkanne]

@@lydiarol7892 dat is, denk ik, een paashaas...🙂

[@lydiarol7892]

@ronaldkanne lekker op tijd.

[@Hog-g2z]

And you please tell her cuckoo clock to be quiet, 🤫 😂

[@ronaldkanne]

nope... :-)

[@marcelspin8989]

Ai die vallende sleutel..🙈

[@ronaldkanne]

ja... iets hou je altijd... :-)

[@dmkpredator]

В конце поржал. Деньги не нужны - только время. И токарный станок, и патрон, и резцы - хурма какая. Да у меня есть все и это весьма не дешево.

[@ronaldkanne]

Hahaha... yes, you are completely right...