How to get LASER precision with your Average Sprayer

[@RonHenry]

Learn How to Calibrate Your New Sprayer Nozzle: kzbin.info/www/bejne/npicqH6GqM5lprs Spray nozzles in the Description!

[@RonHenry]

Which spray nozzle are you using?

[@RonHenry]

✅ You can also build your own adapter using these 3 parts: Quick Connect Coupler: ron-henry.com/quickconnectcoupler 45 Degree Adapter: ron-henry.com/teejetadapter TeeJet End Cap: ron-henry.com/teejetendcap

[@XFBO]

@@RonHenry Thanks for sharing the above BUT how do you add the female quick connector to the wand, please?!?!? I purchased a Kobalt backpack sprayer with a metal wand and brass tip that doesn't allow me to use other tips like the TJ.

[@larryunger1896]

@@RonHenry An Amazon cheap chinese model. I assumed all of these nozzle caps are the same size

[@username-mc7jw]

First video I have seen that actually explains nozzles in a way that is understandable and relates to portable sprayers... THANK YOU for that. Nozzles have been ordered.

[@RonHenry]

Thanks so much! Glad it's helpful.

[@fastgrizzly]

A PSA for those with Flowzone Cyclone sprayers: make sure the last two numbers are 06, not 04 as listed in the video. Those two numbers refer to the size of the orifice and 04 is too small and will burn out your pump. I recently got a new pump from Flowzone, under warranty, and one of the questions they asked was what tip I was using. I told them the XR11004VS and they said the tip was too small. You want an XR11006. I can't speak for what other sprayers need, but I appreciated Flowzone's understanding and told them I'd do my best to spread the word- so here I am spreading it.

[@vio0633]

What pressure setting did you run the 04 on? Will it work ok with a cyclone on the low psi setting?

[@jeffbarno7239]

This is unfortunate. These two that Ron recommends are commonly used by enthusiasts. Perhaps Flowzone needs to improve the design of the pump?

[@RonHenry]

@jeffbarno7239 if what the previous poster is saying is correct, then I’d agree. I’ve run these nozzles in other sprayers for years without issue.

[@fastgrizzly]

@@vio0633 i've always run my cyclone on setting 3. i don't know enough about the pump to be able to say whether or not that affects it, but it certainly could be a contributing factor. i looked after having spoken to the rep at FZ to see if I could find any documentation where they stated to use an "06" but didn't come across anything. like i said, I just wanted to pass on the word because it was easy enough and could save some headaches for users and costs for a company that handled my issue well. having switched to the 06 and spraying a few times since, it looks/feels the exact same to me but i haven't run into any pump issues.

[@stephenfox3236]

Sir, you are on point. Incredible lawn as proof that your well articulated, spoken self in these cleanly edited videos is the real deal.

[@RonHenry]

Much appreciated Stephen! I appreciate you watching.

[@moderntouchfurniture]

Wow Mr. Henry, every time I have a question you have the answer, thank you for these great videos, and very professional videography and illustrations. I'm am ordering these two tips right now.

[@RonHenry]

You are very welcome Mikey. Happy to help.

[@rcolson74]

He finally came around to the teejet tips!! You’ll see a huge difference Ron and won’t be sprinting around your yard to get an application down

[@RonHenry]

Heya R. Colson74. I like my exercise though!

[@dmer91]

Awesome video Ron! Just snagged the XR11004VS tip for the new sod once it gets laid!

[@RonHenry]

Thanks Devin! It's a great spray tip. :-)

[@josephffrawleyjr2005]

Outstanding video. I had been looking for someone to make the selection/purchase of these nozzles easier. Thank you.

[@RonHenry]

Glad it was helpful Joseph. Please share it with anyone else you think would benefit.

[@josephffrawleyjr2005]

@@RonHenry I own a Flow zone Typhoon 2.5. I believe you own one also. They have five settings. Which one do you use to fertilize?

[@RonHenry]

If you’re using a TeeJet nozzle go with the 70psi setting

[@aquienpuedainteresar4188]

Thanks a lot. You couldn't have made it any simpler, plus the links are a great help. I have put off buying them because i never was able to put around my head and all different ones.

[@RonHenry]

Glad it was helpful A Quien Pueda Interesar. Tried to make it as simple as I could while still being fun to watch. Be sure to share it with anyone else you think could benefit. Thanks for watching!

[@willrisher6049]

You deserve way more subscribers, great video and very informative, thank you for taking the time!

[@RonHenry]

I appreciate that!

[@aat3tville181]

Always Great stuff love looking back at your old videos and finding something I needed

[@RonHenry]

Glad you like them!

[@lawnrebel]

good info

[@RonHenry]

Thanks Connor! Always appreciate you watching sir. 🙏😎

[@lawn2learn]

Look at those roots John Perry!!!! I like anything modified to work better. Well done friend 👊🏼👍🏼

[@RonHenry]

I appreciate it Lawn 2 Learn. And only $15!

[@frankieb8974]

Yes! You are going to love those Teejets!

[@RonHenry]

Appreciate it Frankie B. Thanks for watching.

[@mrcaffein]

Don't forget that the Teejet nozzles come in different colors for different flow rates. I find that the *red* nozzles put out almost 2 gal per 1000sqft at my comfortable walk pace, instead of increasing my pace considerably, I switched to a yellow nozzle with the same spray pattern which gives about half the flow rate and comes out much closer to 1 gal per 1000sqft.

[@RonHenry]

It just depends on your walking pace and the pressure of your sprayer. The red TeeJet nozzles at 70 psi, put out fluid at much lower rates than the nozzles the sprayer comes with. Great feedback sir. Appreciate you chiming in.

[@mrcaffein]

If you have a manual pump up sprayer, a constant flow valve is a great investment as well for about 20$. It keeps the pressure regulated so you're always spraying at the same pressure, thus making your application more consistent. It will shut off once the pressure drops below the valve psi rating. Electric sprayers typically spray at a constant pressure so this is more useful for pump up sprayers.

[@TRACKMKIII]

This a great video!! I just ordered both. Thanks for the information.

[@RonHenry]

Glad it was helpful Sam. Let me me know how they work for you.

[@webfeet1564]

Glad to see the 110 is working well for you. Nice video!

[@RonHenry]

Thanks Web! 👍

[@brandonhyden9454]

Very nice job explaining what spray tip to use for different products. Cheers

[@RonHenry]

Glad it was helpful Brandon. I appreciate you watching sir.

[@randallard501]

I have the yard mastery sprayer. I am going to apply carbon pro L. Which tip should be used to apply this product. Thanks

[@RonHenry]

I would use the foliar tip Randal.

[@randallard501]

@@RonHenry thank you. Really enjoy your videos

[@RonHenry]

I appreciate you watching!

[@elkabong5547]

Great video. Leaned a lot. Thanks for your help.

[@RonHenry]

Glad it helped!

[@greenapplejuice23]

Thanks Ron new subscriber. I’m learning a lot got my flowzone in today

[@RonHenry]

Welcome aboard!

[@JL-qo7cs]

Excellent video. You are very knowledgeable. i'm subscribing.

[@RonHenry]

Appreciate it JL!

[@KevinDJones-rv8ye]

Great video Ron. I got my TeeJet nozzles from Princes Lawn Cuts videos for my Typhoon. This and your calibration video will make me a beast next year

[@RonHenry]

Glad the vids were helpful Kevin! Sounds like you're all set to go with your sprayer. Appreciate the support

[@Draega007]

Where did you get the pressure washer wand from? Is it an actual wand for a pressure washer and if so, is it able to withstand the chemicals that would be used through it?

[@RonHenry]

The sprayer comes with it. golfcourselawn.store/products/yard-mastery-4-gallon-backpack-sprayer It works great. No issue with running products of all kinds through it.

[@Draega007]

@RonHenry Nice, I have one of those ryobi battery powered backpack sprayers (mainly because of all the ryobi battery powered tools I have already) and the way it's designed it'll leave almost ¾ of a gallon of product in the bottom of it. Been looking to replace it for awhile now because of that terrible design.

[@RonHenry]

@@Draega007 Gotcha. I can see the convenience of using the same battery. The sprayer I linked above is awesome though. Doesn't leave a bunch of product at the bottom, comes with various spray tips for applying lawn products and is built like a tank. You won't replace it anytime soon.

[@Draega007]

@RonHenry I'll definitely add this to my shopping list. Maybe I can talk the wife into letting me get an early Christmas present lol.

[@adrianfontanez4114]

hi i Ron, appreciate the video. can you advise what are the other components used to complete nozzle sprayer

[@RonHenry]

Hi Adrian. Check in the video description. I have all the parts and where you can pick them up there. :-) 🙏😎

[@adrianfontanez4114]

i see the nozzle tip information but what spray elbow model are you using? looking to mimic your setup as i have a similar green sprayer tip as the one on the flowzone

[@RonHenry]

Check now Adrian. I just added the parts ✅ You can also build your own adapter using these 3 parts: Quick Connect Coupler: ron-henry.com/quickconnectcoupler 45 Degree Adapter: ron-henry.com/teejetadapter TeeJet End Cap: ron-henry.com/teejetendcap

[@adrianfontanez4114]

@@RonHenry thank you. this is awesome setup and super excited to add to my sprayer. love the videos Ron.

[@RonHenry]

Anytime sir. Appreciate you watching

[@jbragg2493]

I just received mine in the mail and love it. Awesome advice as always Ron!

[@RonHenry]

Appreciate you watching sir!

[@adamzx3]

Just what the Dr ordered! Thanks Ron!

[@RonHenry]

Anytime SkinnyGeek1010. Appreciate you watching.

[@marcusfabiousmaximus3463]

TY for this video, can I use the TEE JET 1104VS in place of the VP

[@RonHenry]

I would use the foliar and floodjet spray tips that are in the description.

[@frankokehie3935]

Good morning Ron, I couldn't find the Quick connect to 110 degree teejet nozzle adaptor. please do you know hear I can find it.

[@RonHenry]

Hi Frank. It does appear to be sold out in most places. ✅ You can also build your own adapter using these 3 parts: Quick Connect Coupler: ron-henry.com/quickconnectcoupler 45 Degree Adapter: ron-henry.com/teejetadapter TeeJet End Cap: ron-henry.com/teejetendcap Hope this helps.

[@frankokehie3935]

@@RonHenry Thanks Ron, I appreciate all your help.

[@RonHenry]

@@frankokehie3935 Anytime sir.

[@progression_decibel]

Outstanding video Ron. Going to be ordering a Yard Mastery sprayer soon; you did briefly cover the use cases for the various spray tips - if I may ask, can you advise your recommended spray tip to use for laying down these specific products: - Barricade 4FL (or similar liquid pre-emergents) - Liquid bio's like AIR-8, HUMIC12, Sea Kelps - Propiconazole (fungicide)

[@RonHenry]

Hi Progression. You'll use the red spray tip for foliar products and the white FloodJet tip for products designed to get into the soil. So pre-emergent, fungicide and insecticides, white tip, everything else red.

[@progression_decibel]

@@RonHenry phenomenal, thank you. What would be the use case for the green pressure washer-looking tip that comes with the sprayer?

[@timothywolfe6428]

Thank you Ron. Again great information.

[@RonHenry]

Thanks for watching Timothy! Glad it's helpful.

[@ajvenit]

Great video. BTW - The quick connector link is not working and I like using your links to buy stuff so you get the cred.

[@RonHenry]

Thanks for telling me AJ. It’s fixed.

[@ajvenit]

@@RonHenry thanks, just ordered !!

[@NinosYoukhana]

Good tip… I’m sure this incremental improvements make a huge difference

[@RonHenry]

Yes it will!

[@TheOboogie89]

Is it possible to upgrade the standard wands to accept the quick connect type nozzles? The constant screwing and unscrewing of the nozzle tips gets annoying pretty quick. Can you put out a video showing how?

[@RonHenry]

Looking at the wand on my Chapin, I don't believe this would be easy to do. If you're going to try this, it would be easiest to swap the entire trigger and wand. I'm not sure where you'd even get one. Likely easier to just buy a sprayer that already has the quick connect system.

[@Mike--K]

@@RonHenry Great video, Ron! Like others wrote, you present the facts without any fluff. I upgraded my Solo Comfort 475 manual backpack sprayer so I could use the TeeJet tips, specifically with the quick connect cap, and get rid of the bendy plastic wand. As you suggested, using the quick connect cap requires a new setup, but I am glad I did this. The plastic wand that came with the sprayer is now in the recycling bin, and I can easily change the TeeJet tips as required for the product I'm spraying. TeeJet offers many versions of the quick connect caps, but I recommend the 114445A series because these have a round hole for the tip. The other versions have shaped holes for the tips that lock them into place and they cannot be rotated to adjust the spray pattern.

[@-What-are-your-thoughts]

The quick connect in the description, does that include the angled black piece? I’m looking for the whole setup. Were can I pick a sixteen hundred shirt? Great video.

[@RonHenry]

Hi Ron. Yes it does. The adapter includes everything between the end cap and quick connect fitting. The shirt was a gift from a viewer. Will have to see about making them available on the store. My other/similar merch is available here: kzbin.infostore Thanks for watching sir.

[@LG-cz4hb]

I have two of those custom 1600 shirts....only mine say "One Thousand" (cuz I have a GM1000). The guy that makes them is superb. 👌

[@RonHenry]

Nice

[@runesejerhoffmann4491]

Greetings from Denmark! Great video Ron, i am most definitely jealous about the equipment you guys have at your disposal in your country, stuff like that is much harder/more costly to come by in scandinavia. Thanks for the video nevertheless 👍🌱

[@RonHenry]

I hear you there Rune. We are definitely spoiled here in the US. I really appreciate you watching. Always great hearing from overseas viewers.

[@TechGearNinja]

Definitely going to order these and try them out. Thanks for the advice!

[@RonHenry]

Anytime Connor! Thanks for watching.

[@rdcruick]

Teejet is outstanding. You'll be surprised.

[@henrypoth369]

Really liked the video. I'm assuming you want to use the fine mist sprayer with iron/nitrogen fertilizer and post emergents, and use the bigger droplet sprayer with soil enriching fertilizers and pre emergents?

[@RonHenry]

Yes, correct. Fine droplet for foliar apps and larger droplet for products that get into the soil.

[@donmendenhall8317]

What about a dual nozzle wand setup? I have one on my spray mate and works amazing

[@RonHenry]

Same process. Just use a container for each nozzle.

[@juliandelgado5575]

Thanks for the info I got the t jeet tip where do I get the quick connect tip for the wand

[@RonHenry]

Not sure what you mean. Your sprayer should have come with it?

[@justinaguilar867]

Thank you very much! I purchased your recommendation from flowzone!

[@RonHenry]

Awesome Justin. Once you have that adapter, you're all set to go. Appreciate you watching.

[@CHILLYBUNSGACHA]

Very helpful videos thank you. I just watched a from FlowZone on does and don’ts, they say Don’t use third party tips as could damage pump. Any thoughts? Thanks. 2:26 2:26

[@RonHenry]

Nothing wrong with using a TeeJet tip with the Flowzone.

[@zeroibis]

You should do one on how to use the tjet quick release caps.

[@RonHenry]

Good call zeroibis. I'll see about putting something together. Appreciate you watching.

[@chipgunter]

Great video Ron, I purchased both of these last year to use with my Ryobi battery backpack and both do an excellent job .. Thanks for the informative and to the point videos..Have a great day !

[@RonHenry]

Sounds great Chip. Appreciate you chiming in. Glad the tips are working well for you. Thanks for watching.

[@papamowslow196]

Thank you again for all the information. Order has been placed for these items.

[@RonHenry]

Happy to help out Papa mows low. Appreciate the support. 🙏😎

[@bidenisatraitor7633]

Great video!

[@RonHenry]

Thanks so much. Glad you found it useful.

[@PacificNorthwestLawns]

I love using the teejet nozzles. They work really well. Great video Ron. 👊🏼

[@RonHenry]

They do a pretty good job; especially the foliar tips.

[@ALO1820-f1]

What tip would you recommend for spraying tenacity?

[@RonHenry]

Foliar in most cases. ron-henry.com/foliartip

[@fescueme1081]

This video was very informative.

[@RonHenry]

Thanks Fescue Me. Glad you enjoyed it.

[@adamreed1750]

Great info. I need some new tips. Most factory tips aren’t that great.

[@RonHenry]

I've used the green tip the Flowzone comes with for decent success. That said, the TeeJet tips are better. You get more coverage given the same amount of product. Definitely a timesaver.

[@lucasdirt30]

I have the same battery sprayer as you and bought the recommended sprayer tips. However, the black part wouldn't fit into my gold tip sprayer opening.

[@RonHenry]

You need this adapter: fzspray.com/collections/adapters/products/quick-connect-to-110-deg-teejet-nozzle-adapter

[@hanbig125]

Thanks for doing this video Ron! I purchased both of those TeeJet tips in the video as well as some others including the XR110001VS for a very fine mist at higher pressures. I wanted to see how that worked with the Pest Control as well. I was able to find them at Sprayer Depot for $5 each.

[@RonHenry]

Very welcome Clayton.

[@ithinkin10]

I'll be spraying Sedgehammer next week with my Ryobi Cordless Backback sprayer. I'm assuming the TeeJet XR11004VS is what I want in this case? Thanks in advance!

[@RonHenry]

Yep! That spray tip will work.

[@papamowslow196]

After using the standard nozzle on my first use of the FZ Typhoon 2 in will definitely be purchasing the TJet nozzles. I’m too old to be moving as fast as I had to move.😂😂

[@RonHenry]

Very nice Papa Mows Low. Let me know how they work out for you. I'd run your FZ at the lower PSI setting with these nozzles. Appreciate you watching the content.

[@tjohnson1673]

Hello Ron. Just bought a new Flow Zone Cyclone 3 and was wondering where could i purchase the fan tip for apply herbicides?

[@RonHenry]

You can get it here: Foliar Tip: amzn.to/3DUCTk3

[@tjohnson1673]

@@RonHenry Thx Ron. You are the man!!!! Can't wait to tune into the next live stream!!! My Zoyzia is greening up, but not as fast as ur Bermuda. 😊

[@maxfloyd9969]

Wow, top notch video.

[@RonHenry]

Thank you Max!

[@frankie385]

hi Ron, where would i get the seal gasket for the nozzle?

[@RonHenry]

Should be able to find on Amazon.

[@frankie385]

@@RonHenry hmmm do you happen to know the size?

[@fairwaybermudalawn]

Ron. Great job on the teejet nozzles info 👏 always straight to the point 👊...I really enjoy my teejet nozzles this year.. great job sir thanks

[@RonHenry]

Thanks for watching Darrell. Glad the content is helpful. Appreciate the support.

[@royals1833]

I receive my flowzone cyclone in a couple of days and ordered the AIXR11004VP for my preemergents based on your recommendation. Do I use that nozzle for postemergents as well, such as MSMA? Sorry. Im new to this. The local store recommended I use MSMA for postemergent. Also, do I need to order the quick connect adapter for my flow zone? I'm trying to get everything ready. Thank you for all the info. Your videos are a huge help!

[@RonHenry]

Unless you’re spraying commercial properties, you shouldn’t be using MSMA. It’s no longer labeled for use on residential lawns. You will need a quick connect adapter unless flowzone is now including them. When I got mine years ago, it wasn’t included.

[@royals1833]

@Ron Henry got ya. Im not sure why they recommended target 6 but do you recommend a safe post emergent for bermuda? I have every weed imaginable including Dallisgrass. Using Prodiamine for Preemergent but not sure about post. Thanks again and thank you for the heads up about msma

[@wollins2]

Hey Ron, what tip would you recommend for lawn paint application? I have a Scotts 190567 Lithium-Ion Battery Powered Pump Zero Technology Sprayer which I'm hoping to use for this kind of application.

[@RonHenry]

This one: amzn.to/3iAG06O

[@wollins2]

@@RonHenry Thanks! Also I just wanted to say that you're the most responsive KZbinr out there. EVERYTIME I've asked a question of you not only do you answer it ... but you answer in a very timely manner as well. Kudos!

[@keith606]

I have the same sprayer but it looks like it requires an adapter to use the Teejets. Any idea what the correct adapter is?

[@netm203]

Hey Ron, Which should I buy for treating creeping charlie in the lawn?

[@RonHenry]

Depends on the grass type Net M. If you have Bermuda, go with Celsius. golfcourselawn.store/products/celsius-wg-broadleaf-and-grassy-weed-control-for-warm-season-turf

[@netm203]

@@RonHenry hey Ron, I'm cool season, but I meant which sprayer nozzle? The one I use doesn't seem to give good coverage

[@RonHenry]

Ohhh. This one. ron-henry.com/foliartip

[@netm203]

@@RonHenry you're the man! Order placed

[@RonHenry]

Thanks sir!

[@newtonbrook]

Thank you Ron. I just want to say you do a excellent job. You are a talented man. If I want to use a three way weed killer on a lawn what tip would you recommend. TeeJet AIXR11004VP or the TeeJet XR11004VS. Thank you.

[@RonHenry]

If you're looking for a great combination for warm season grass, I like a Celcius and Certainty combination. Great grassy and broadleaf coverage that does a great job on Poa and sedges. Either spray tip can work well. The XR11004VS is best for foliar apps but if you're spraying in conditions with a bit of wind, go with the AIXR11004VP. You'll need to use a surfactant with them. Hope this helps. Celcius: ron-henry.com/celcius Certainty: ron-henry.com/certainty Surfactant: ron-henry.com/surfactant

[@newtonbrook]

@@RonHenry thank you. I use Killex on a cool season turf

[@RonHenry]

Anytime

[@dankomartek2145]

Does Teejet make other spray pattern tips? Like say a stream pattern?

[@RonHenry]

Pretty sure they do Danke. They make ones with even larger droplet sizes than the ones shown in this video. Just depends on what you need.

[@dankomartek2145]

@@RonHenry thank you. I'll Google Teejey and c what they have.

[@jd-mr9xn]

If I was going to apply Q4 plus which nozzle would i need? A foliar nozzle or a larger droplet nozzle?

[@RonHenry]

I would use foliar. This one: ron-henry.com/foliartip

[@atroche1978]

Man I think I have ESP. I was at HD yesterday looking for a better fan tip. 🤔🤔🤔🤔🤔

[@LG-cz4hb]

I was doing the same. Just not at Home Depot 🤔

[@RonHenry]

You sent out the vibes and I made the video Bert!

[@RonHenry]

There you go LG! I aim to please!

[@larryunger1896]

Hi Ron, I purchased the tee jet tip for my sprayer. However the tip is slightly larger than the opening of tip body. Any suggestions for a fix?

[@RonHenry]

Hmmm. I'm not sure on that one Larry. What kind of sprayer is it?

[@larryunger1896]

It’s a cheapy Chinese model. I thought all the reads r the same.

[@RonHenry]

@larryunger1896 hmmm. You can’t tighten down the cap to where there aren’t leaks?

[@marsbeads]

Which is better for pre-emergent application, TeeJet AIXR11004VP or TF-VP4 TeeJet Turbo FloodJet Wide Angle Flat Spray Tip? Thx

[@RonHenry]

TeeJet FloodJet Tip: amzn.to/377gMJE

[@marsbeads]

@@RonHenry thx!

[@tite732]

Will this fit on a Ryobi 2 gallon sprayer? The standard nozzle head is terrible 😞

[@RonHenry]

It should Don Julio. The nozzles on those are changeable.

[@tite732]

Thank you 🙏

[@joebriggs9599]

Are they the same as pressure washer tips?

[@RonHenry]

No Joe. The included tip is more akin to a pressure washing tip. The TeeJet tips are designed for applying products to crops.

[@monyamanestephen5437]

Hey Ron, I wanna build a boom sprayer with 5 teejet noozles (11004), which 12v pump would you recommend? Flow rate and pressure? Any formula to consider if i want to add more noozles? Thanks

[@RonHenry]

No idea on this one. I’ve never built a boom sprayer.

[@smk791]

Consider also adding the Turbo Teejet induction TTI11004 to your arsenal. TTI's are the best induction tips ever designed for direct soil applications and for systemic fungicides and insecticides.

[@RonHenry]

Thanks SMK. Appreciate the additional feedback. 🙏😎

[@ousamaabdu794]

Great video as always Ron.. Btw, I have 2x of the Chapin 20v Sprayer. Which upgraded fan tip do you recommend, and is there a recommend metal wand for that sprayer as well?

[@RonHenry]

I don't know of a metal wand for the sprayer. This is the spray tip I would use: amzn.to/3DUCTk3

[@ousamaabdu794]

@RonHenry Thanks for the help Ron!

[@RonHenry]

@ousamaabdu794 happy to help.

[@matthewinga9546]

Hey Ron, where did you rent the Dingo in Buford?

[@RonHenry]

Keystone Rental in Duluth.

[@matthewinga9546]

Thanks-

[@RonHenry]

Anytime!

[@rayseanphillips-martin8920]

Is the quick connnect adapter required for the flozone with teejet nozzles ?

[@RonHenry]

Yes

[@MrIsaacvillarreal]

Ron. How often do you verticut? or do you just mainly mowe?

[@RonHenry]

I primarily mow Isaac. My lawn has only been verticut once. Was done few years ago. kzbin.info/www/bejne/jqWmqahjbddgqpY

[@MrIsaacvillarreal]

Thanks. 😊

[@trey3024]

These videos are great! Any advice or content with mesh check valves to go along with the TeeJet nozzles? Just ordered some XR Nozzles and got the 50 mesh 5psi check valve ($4). Idea is to hopefully prevent excess dripping after releasing the handle when applying professional grade herbicide such as Certainty and Celsius.

[@RonHenry]

Hi Trey. I’ve not used the check valves before. I don’t notice issues with product dripping from the nozzle when I stop spraying. I can see a check valve could be useful though.

[@Mark-ho2cn]

Ron, do the tips you referenced in the video work for the Flow Zone model as well? Mine are quick release and they don’t seem to come apart.

[@RonHenry]

Yes they do Mark. Check the video description for an adapter for Flowzone that’ll allow you to use the TeeJet nozzles. Great question.

[@docsteve309]

Thanks Ron!…I really appreciate your content and of course you know you a Lawncology 👑…☮️

[@RonHenry]

I appreciate that Doc Steve. Thanks so much for watching. I really appreciate the support.

[@gspeaking]

Not finding any link to the nozzles. Went to Teejet site and the models do not come up?

[@RonHenry]

Hi Archie. You can get them here: TeeJet AIXR11004VP: amzn.to/3fIexOD TeeJet XR11004VS: amzn.to/3iAG06O Quick-Connect Adapter: shop.fzspray.com/products/quick-connect-to-110%C2%BA-teejet-nozzle-adapter

[@trstanhussey8830]

How does the TeeJet AI11004-VS 110 Degree Air Induction Flat Spray Tip - Red compare?

[@RonHenry]

Air induction tips have produce larger droplet sizes than the non AI tips Trstan. On a windy days, you could go with an AI tip to reduce drift.

[@5thg5]

Enjoyed this one Ron…I been searching for this information this past weekend. ANOTHER GREAT INFORMATIVE VIDEO! 👍🏽👍🏽👍🏽👍🏽👍🏽

[@RonHenry]

Glad you enjoyed it Wize Guy! Thanks so much for watching.

[@benedictcalantoc7115]

Would this work for kobalt sprayer?

[@RonHenry]

Yes it will

[@benedictcalantoc7115]

Thanks

[@fridayufot260]

Hey Ron, will I need to get the quick connect adapter also before I can use the tips on my Flowzone sprayer?

[@RonHenry]

Hi Anna. Yes you will. If you look in my pinned comment you can see the 3 parts you’ll need if the other I sold out.

[@Ronisonce]

Hi Ron, do you vary your pressure on the backpack sprayer? I’m just getting into spraying so I want to make sure my calibration is correct. Thanks (also Ron)

[@RonHenry]

No I don't. 90% of the time I run on the lower pressure setting. The only time I switch to high is if I'm spraying fungicide since the label calls for 2 gallons per 1000 square feet vs 1 gallon per square feet for most other products.

[@mr.greenthumb4293]

Hey Ron! My tee jet just came in the mail but I think it’s missing an attachment. I only received the tee jet but not the connector that attaches to my wand. Where can I get the attachment that attaches to the tee jet?

[@RonHenry]

Here: shop.fzspray.com/collections/adapters/products/quick-connect-to-110º-teejet-nozzle-adapter

[@felipelabomba848]

Ron, I just checked the two Tee Jet red nozzle tips that came with my new Yard Mastery sprayer. The numbers on them are both 110 04 VP. The nozzle hole on one is slightly more oval and the notch on the side squared off, while the other nozzle hole is thinner and wider, and the side notch is V-shaped. Any idea which nozzle makes the droplets bigger or finer? Thanks

[@RonHenry]

The nozzle with the ports on the side is an air induction tip. When run at lower pressures is draws air in which helps promote larger droplets

[@felipelabomba848]

@@RonHenry Thanks Ron. Is that the V-shaped slot on the side?

[@omikeyutube]

Do these fit the solo 435 ? Thanks! Btw, yesterday was the first time I saw any of your videos. I was pretty impressed, and very interested in learning the things that you know. Thanks so much for sharing your knowledge with the rest of us who don't know so much. Your videos are great extremely well done and very informative and to the point without any bullshit, perfect!!!

[@RonHenry]

Hi omikeyutube. I've not used a Solo 435 personally but from the pictures, it does look like it has interchangeable tips. With that being the case you should be able to swap in the TeeJet tips without issue. Appreciate you watching the content sir. Thanks for the support.

[@Mike--K]

@omikeyutube, I have the Solo 475 Comfort, which look like it shares the same wand with the 435. The TeeJet tips fit perfectly in the wand.

[@omikeyutube]

Yes, these did fit my Solo 435 Thanks

[@alexanderly7120]

You're making me want to get a backpack sprayer just so I can use this nozzle. LOL!

[@KevinDJones-rv8ye]

It is a must Alex, King of the used reel mower deal finder. I have been trying to keep up with you and Ron , in south Atlanta, since last year

[@alexanderly7120]

@@KevinDJones-rv8ye we truly appreciate you watching. It's awesome to see a community that appreciates good grass.

[@RonHenry]

Funny you should say that Alex. I know a guy with one. :-)

[@RonHenry]

Totally agree Kevin. Backpack sprayer makes a pretty big difference to what you can do to your lawn.

[@KevinDJones-rv8ye]

@@RonHenry Learning from the best on KZbin

[@ericstinnett9182]

Great video, I'm thinking about getting the typhoon flow zone 2.5 variable backpacks sprayer. Where did you order your flow zone from? Thanks

[@RonHenry]

They're pretty much sold out everywhere Eric. If you're in the market for a great sprayer, I'd go with this one: ron-henry.com/backpacksprayer It's basically a Flowzone but comes with TeeJet tips already included. I have a review coming out for it soon.

[@michaelzielinski7703]

Will these work on the Kobalt Sprayer from Lowe’s and the Ryobi from Home Depot? I have the Kobalt and would love to give these a try.

[@RonHenry]

Yep. They do Michael.

[@michaelzielinski7703]

Thank you! I just took the Kobalt out of the box. Pretty good value, runs and sprays well. I just want really high precision which comes down to the nozzle.

[@RonHenry]

The nozzles will make a big difference. Just be sure to calibrate. It’s easy to do. I show how in this video: kzbin.info/www/bejne/npicqH6GqM5lprs

[@kmcclanahan2063]

I have done a little research and noticed that there is a "vp" version of XR11004. Is there any difference between the two tips other than the "vp" version being plastic and the "vs" version being stainless steel?

[@RonHenry]

I believe that's the only differences K McClanahan. Plastic vs. Steel. I opted for steel since it should last longer than the plastic version. Great comment.

[@lamcarter]

I have a Milwaukee backpack sprayer…does anyone know the thread size for the wand? I can’t find it anywhere. I want to put the quick connect coupler on it. Thought it was a 3/8 NPT but nope, that ain’t it!

[@RonHenry]

I'm not sure on that one lamcarter. You should be able to swap the nozzle without having to go through the trouble of fitting a QD system. Unless that's what you want of course. :-)

[@lamcarter]

@@RonHenry Thanks Ron. I swapped the nozzle but you know I have to have that cool set up you got going there! Thanks for the reply!

[@derrickdouglas944]

Will these work on spayed plus yt25e?

[@RonHenry]

Yep! Should work just fine Derrick. the YT25e appears to have the end cap that supports swapping nozzles.

[@Blubaugh5]

I have been waiting for someone to do a more advanced nozzle option video for the community. I'm not going to sugar coat this, I cringe when I watch people use the tips that come with the back pack sprayers. The tips that come with then are simply pressure washer tips. I would have liked to see you take it a step further and explain how pressure can also affect the droplet size. Anyway, a great video to get people applying products properly.

[@RonHenry]

Thanks for the feedback Dan. I considered going into calibration and pressures but a lot of that is covered in the video at the end of this one. Didn't want to make the video overly long. Appreciate you watching.

[@JBSpine007]

Too bad the quick connect 110 degree adaptor for the Flow Zone is out of stock everywhere. Is there any alternative? I guess if not then it is not worth buy the two different nozzles if you don’t have the 110 degree adaptor correct>

[@RonHenry]

Got you covered Jerry. You can assemble your own with these parts. I've also added the list to my pinned comment. ✅ You can also build your own adapter using these 3 parts: Quick Connect Coupler: ron-henry.com/quickconnectcoupler 45 Degree Adapter: ron-henry.com/teejetadapter TeeJet End Cap: ron-henry.com/teejetendcap

[@tausnowboarder2142]

Hoping you can help with my Teejets! Is an O ring required to be used? You use one, but my Flowzone Cyclone 2.5 didn’t have any with their nozzles and the Teejet I ordered didn’t come with one. Do the Teejet caps come with O rings?

[@RonHenry]

Not necessarily Ben. The o-ring does help with sealing but if your cap is in good shape you shouldn't experience leaking issues. Your existing nozzle might have an o-ring that can be reused. Hope this helps. Appreciate you watching.

[@tjohnson1673]

Hey Ron. Great video as always. QQ. I am trying to get one last boost of green without adding any nitrogen to the lawn (since we are almost at the end of the growing season). Is Ironite OK? If so, can I add carbon pro g @ the same time? Any suggestions on another granular product would be welcomed. Thanks Ron. I'm a Zoysia lover, but your Bermuda is awesome.

[@RonHenry]

Hi T Johnson. Yes to both. If you're looking for a CarbonPro G substitute, I'd go with Essential-G: golfcourselawn.store/products/essential-g%E2%84%A2-granular-carbon-free-shipping If you're open to liquids I'd also recommend NutriSolve: golfcourselawn.store/products/nutrisolve-with-seaxtra. Thanks for watching the content sir. Appreciate the support.

[@jimsulsona4128]

Just an FYI...the Quick-Connect adapters are not available because they are currently out of stock! (as of Aug 2021)

[@RonHenry]

Heya Jim. You can also build your own adapter using these 3 parts: Quick Connect Coupler: ron-henry.com/quickconnectcoupler 45 Degree Adapter: ron-henry.com/teejetadapter TeeJet End Cap: ron-henry.com/teejetendcap Hope this helps. 🙏😎

[@Eddie-gb3bn]

What type of grass is that? Looks like carpet.

[@RonHenry]

Hi Eddie3074. It's Bermuda grass

[@Eddie-gb3bn]

@@RonHenry wow, can I grow that in the pacific northwest? If not which grass can I cut the shortest?

[@PrincessCutLawnCare]

This video brings back good memories! My first video ever was about teejet nozzles, and I must say.. you did a much better job than I did. That video is so cringe to watch now haha

[@RonHenry]

Thanks man! I just watched your video. It wasn't that bad man. Granted your stuff now is much fancier, but that video is still good. You weren't the "HEELLLLLLOOOOOOOO KZbin" guy. 😂