Roosevelt Heritage Build

[@rns2222]

Such a well executed set of modifications.

[@CantSitStillforREAL]

Beautiful- if I had the money to have you build my 200- I’d have a second one🤭😆🤘🏼

[@paachi]

Excellent build as always Eric. Special shout-out to the electrical wiring. You guys have upped your game there

[@AFnic]

Amazing truck! It’s super cool to see these come together!

[@JeffC1]

Gorgeous rig, as always Eric. You guys do amazing work.

[@PureBlood777]

Wow That’s the best looking heritage I’ve seen

[@BGaud]

You guys do great work! I'd love to see some 4Runner builds in the future, if possible. Keep the vids coming!

[@7150285]

After Toyota stopped producing the FJ Cruiser, I think 4runners are the most capable off roader now. Use to be the FJ Cruiser.

[@WideAwakeHuman]

@@7150285 you mean not including the land cruiser lol

[@7150285]

@@WideAwakeHuman I don't think Land Cruiser are that capable off road as 4runner (due to its size). Certainly not as capable as FJ Cruiser. But certainly MUCH more capable off roader than Sequoia for sure.

[@philamor5139]

love how he showed off the paint protecting film

[@rwutube]

Y’all do amazing builds. Really fine work.

[@carypyke935]

Eric, great video ...amazing build !

[@cesarroman9976]

That is an awesome vehicle guys did a fantastic job beautiful on the outside all the accessories are phenomenal love it keep up the good work.

[@dougnyc8324]

Love these builds, you guys do amazing work. So frustrating to hear the rumors that Toyota isn’t going to bring the 300 to the US. I’ve been keeping an eye out for a used ‘16 for many months but no luck.

[@rostamr4096]

wow...nicely built...

[@Robert8455]

Beautiful. I'd love to have one.

[@radnaabaatardovchin8779]

Hi, brilliant build. BTW, I have a question about the air compressor connection. Seems like the twin-compressor connects to the switch pros but this one handles 35A max four of them. How did you connect the 60A load? combined two 35As or using different big relay separately? thanks for sharing the knowledge. I planned to make a similar setup. Cheers.

[@castleblackrottweilers9713]

Perfect setup 🙌

[@7000ft]

Do you have any written instructions on the 30" Rigid light modification?

[@fadjarroosdianto6079]

Best Winch set up on lc200.

[@ToyotaTruckBuilds]

Fantastic build!

[@DonnieHoock]

Nice build!

[@7150285]

Any lift? Or factory ride height suspension? Sorry didn't watch the whole vid.

[@johnsaucedo1131]

Duuuude!!!!!!!!!! SOLD!!!!!!!!!!! I need to get one of these!!!

[@TheColombiano89]

Great work 👏

[@matthewconnors195]

Hi Ed, how can I procure the National Luna LED lights for my LC 200? I am only finding them in South Africa? Do you have a domestic supplier here in the states? Thanks for any info.

[@AL_Marx]

WOW..awsome build! Where can I get a detailed cost for the installed parts

[@3ksportsunlimitedllcbaseba136]

Wow I need one!

[@jgentile1798]

Can you guys build prev purchased 200 or just the vehicles you sell?

[@urbandecamp]

Would love to know what brand the modular fuse block is, located on top of the auxiliary battery. I’m guessing not a brand available in Australia.

[@edmartintoyota8599]

Bussmann

[@ogreogre2080]

Super super bravo legend Toyota land cruiser 2000👍👍👍

[@mujarice]

I'm just about to start an aux battery build for my 16 land cruiser. I wanted to go with an AGM starter and LiFePo4 aux battery but I've read that the alternator won't fully charge an AGM and the fuse diodes don't work in 16+ models. How were you able to overcome this?

[@matbennett22]

Eric what size is that Front Runner wind deflector?

[@edmartintoyota8599]

1345mm/1425mm

[@hmoob21stcentury]

It'll be so cool if you color it hunter/emerald greeen like the 1997 models.

[@sdwmd]

Perfect build, if not over the top and likely to be purchased by someone who initially will never use the functionality. Please, though, and this is for many auto youtubers......stop saying "we have" every 6 seconds.

[@philipthao8527]

do you guys do superchargers for LC 200s too???

[@lgphato2115]

How much did this vehicle cost with all the extras ?

[@TheRippleEffect1]

What is the name of the front bumper on this vehicle?

[@edmartintoyota8599]

It’s the OEM stock bumper

[@carlosmadrid3833]

How much for that build. Interested

[@heritagecruiser]

Do you happen to remember if this is the 1345mm/1425mm wind fairing? It looks like it stretches the full width of the rack which the one recommended for the 1255mm width racks does not.

[@matbennett22]

Bryan, I asked Eric which one was used on this build and he said it was the 1345mm/1425mm. When I called frontrunner they told me the same thing that it is the smaller fairing. The front runner rep said if the bigger one fits go for it lol. I like the look of the longer fairing so I will probably order that one.

[@heritagecruiser]

@@matbennett22 I actually just went ahead and bought the 1345/1425mm fairing-I literally just finished putting my rack on 15 minutes ago. The bigger fairing works fine and looks way better. I’ll try to take a video of it and get some close ups of fitment

[@heritagecruiser]

@@matbennett22 Are you on IH8MUD at all? Might be easier to send pics than make a video

[@matbennett22]

@@heritagecruiserthat's awesome, I'm mbennett22 on ih8mud.

[@coooooool12342]

Will these mods lower the reliability of the car?

[@jaypikachu6660]

All add-on accessories are top quality, what is the asking price?

[@BeemerDuc]

i noticed on one of you previous 200 series builds with the 8 speed transmission you installed new gears and lockers. Nitro mentions you need to source parts from the pre 2016 land cruisers to fit their gears and lockers. Was that difficult? great land cruiser content by the way!

[@jmyujuico6180]

Another awesome build Eric! I notice you guys use SPC UCAs in a lot of your builds. What is the reasoning for using those over going with OME UCAs to go along with the OME BP51 suspension setup?

[@edmartintoyota8599]

OME UCAs are brand new in US. We have used several sets. But honestly, I prefer the SPC for sake of more adjustability

[@drsus0]

What solution do you guys have for deleting the mud flaps?

[@edmartintoyota8599]

XPEL on rockers

[@drsus0]

@@edmartintoyota8599 hmm, im not entirely sure what that is or who it works (tried looking it up). I thought xpel was a coating?

[@damachine3]

@@drsus0 I think he means XPEL will protect it given the mud flaps are gone.

[@drsus0]

@@damachine3 ah... I was asking more about covering the huge gaps/holes that are left when you remove them

[@markestioco4992]

Can we get that here in canada? Thanks

[@xaxs101]

Just bought a lottery ticket wish me luck

[@lordprince6758]

Will you do shipping here in the Philippines?

[@Chris_Styles]

That's clean

[@MikeGonzalez777]

What percentage tint?

[@jacobashcraft9740]

GAHT DAMN!!!!

[@sarahnewyork702]

Hi Eric! Could you please tell me how can I purchase this Land cruiser in Germany? I would appreciate if you answer my question. Thanks in advance

[@edmartintoyota8599]

Sorry, we don’t sell outside the US

[@sarahnewyork702]

@@edmartintoyota8599 Oh. Ok. Thanks for your responding. Hope you be lucky in your life and work. Best regards

[@nxt4x455]

👌🏼 100%

[@cesarponce6532]

How much is the build

[@DANT-E]

Sweet

[@edwardhetherington]

Can I ship my Heritage Edition to you and have some of this done?

[@edmartintoyota8599]

Sorry Ed, we just work on ones we sell new

[@jjkerning3293]

Looking at vehicles I’ll never be able to afford

[@NovemberBaseball]

clean! for sale?

[@edmartintoyota8599]

It’s sold, sorry

[@JymSilvan]

How much $$$ 🤩🤩🤩

[@mandizzlesrt]

Another reason to sell my first house.

[@GrizzlyJ44]

I thought the paint was going great until you painted the heritage badge :(

[@lgphato2115]

Bummer. These are going away, The cash cow has left you behind.

[@tree356]

$150K+...

[@bradodeman1637]

Too many aftermarket bells...decreasing the value of this land cruiser over time!

[@Mindmybusiness2023]

This is bad A$$