Are they really different? Nike Blazer vs Nike SB Blazer

[@RoseAnvil]

Get a high quality wallet, belt or MORE in the Rose Anvil shop here - bit.ly/44jXLNu

[@danielhayes3607]

Boarders went from shoes with protection to pumps (vulcs) and you can’t make vulcanised shoes much better. Nike sb insoles is what makes them a cut above other skate shoes.

[@TP_7861]

Vans did an overhaul with their skate program about 2 years and upgraded all the "Skateboarding" models. It would be interesting to see you do a comparison between the non skate Vans and the new skateboarding line equivalent of a shoe model. IMO the new shoes are better quality and last longer but it would be cool to see a breakdown and if it's just placebo. Keep up the great videos!

[@haterskeephatin101]

I second this! The skateboarding ones are better but they also made them too narrow.

[@TP_7861]

@@haterskeephatin101 I've got a pretty narrow foot so they actually fit me better now haha. The Sk8 Hi and Old Skools still fit a little wider IMO.

[@tickandslug]

The different skaters even have shoes Taylored to them, not just names slapped on shoes. Some you need to untie to have a hope of taking them off while the Kyle walkers are able to be slipped on easily.

[@tickandslug]

​@@haterskeephatin101the Kyle walkers are wider

[@ano1962]

On the Mids vans adding the tongue straps made them worth it to me, Im almost 40 so I don’t skate every day but I do feel like the Sk8 pros feel better and last a little longer

[@wenbozhang8358]

Since the regular blazers’ toe cap is not double layered, they come apart really quickly from skating due to the grip tape breaking the stitches, separating the two toe pieces. The single piece toe on the SB ends up being more durable since there is no stitching to break and the toe stiffener on the SB serves as an additional abrasion resistant layer against flip tricks. Long story short, I’ve found the SB’s toe section to last much longer for skateboarding compared to regular blazers.

[@SUB0SCORION]

This is true. Also cheap suede is much better than plastic coated leather. Also its a vulc sneaker putting roughout full grain leather would make it too stiff. Would take a shitton of time to break in. I would get a hole in the outsole by the time the leather would break in

[@KayoCosio]

You guys are absolutely right. Sometimes I watch this channel and feel like the dude just wanted to be negative coz it will get more views, instead of trying to understand the product and the consumer's needs better. It's a huge bummer that he seems to be always pretty much guessing.

[@sebastianestrada4690]

​@@KayoCosiobut he has good points. These will do the work fine but for the price feel cheap

[@Gnurklesquimp]

I always wondered about the actual integrity of the patch... It's extra relevant for skate shoes to cut useless costs like that, the lowered cost doesn't necessarily surprise me. Many skaters experience very little difference between all the different kinds of sneakers and go cheap for the best money/durability ratio, a lot of it is just the positioning of certain parts, like when the laces stick out too much and get ripped apart. I'd figure if there was such a thing as skate shoe made out of a single piece of suede, that'd be perfect. The patch does look sick, though.

[@wenbozhang8358]

@@Gnurklesquimpnot quite a single piece, but check out the Nike SB bruins. There is no stitching that can easily come apart

[@magnussigurdsson9548]

The removing of the patches on the toe, from the regular blazers to the SB’s, is definitely also a plus imo. Because you would instantly blow out the stitching if you were to skate the regular ones, and since they’re not double layered you would just have a hole going straight to your toes. Also, the plastic toe-stiffener is very durable against the griptape once you blow through the suede upper layer. I have skated two pairs of the SB’s and they have lasted very well when compared to many other skate shoes I have had. I really enjoyed skating them.

[@joe_ferreira]

All Nikes are thin garbage to skate in anyways. I missed the rough out shoes from the late 90's.

[@magnussigurdsson9548]

@@joe_ferreira I don’t know, I like them and I like that they are a little thin. My feet don’t feel bruised after skating in them so I’m satisfied with them overall

[@alxjcaboose]

As a skater, I found this super interesting, and would love to see more skate shoes being cut apart to see what is a better skate shoe to invest in! Balance that durability and cost would be a great mini series to see.

[@newnum2]

I think you missed one thing. Skate shoes don't want an ollie patch on the outside that changes the amount of grip it will have against the deck (would necessitate re-calibrating your flick for kick flips). So what you are calling a toe stiffener might be the reinforcement of the ollie wear area if it goes over that far. Vans Pro skate shoes have that and call it the duracap. Also skaters would always like to get an extra set of laces in the box because those get torn up.

[@kingittyking]

I've been skating in these for about a year now and really like them. They're comfortable and last a while. The softer suede makes it easier to move my ankle compared to the harder normal blazers (which I wear day to day.) Plus they look great imo.

[@kingittyking]

Also, that isn't a "dirt funneling gusset" its an elastic strap that keep the tongue in one place, so that it doesn't slide around and distract you.

[@Cedar_P]

@@kingittyking that's the intended feature yes, but what he said about the dirt is definitely true

[@miroslavbuchar2559]

Also the SB blazers are a bit lower so that helps easier ankle movement as well. But also I dont understand why thy didnt just use two wide rubber bands on each side like in low SB Blazers or SB Dunks or low so the dirt problem is out

[@matroxman11]

How are you skating one pair of shoes for a whole year I get like a month or two tops

[@crowleys75]

Man this channel blew up like crazy I love it I loved it when you started out and I love it even more now and to see the sponsorship that you're getting and the amount of customers that are watching this is just unbelievable and I'm so happy for you!!!

[@majsiter4829]

The SB blazers are genuinely some of the best shoes I've owned

[@RideTheSolarWinds]

The blazer you are looking for is the SB Blazer ISO or orange label. These are skate shop exclusive blazers that GENUINELY have massively improved material quality. They have the best quality leather of anything Nike and Jordan (even if that isn't saying a lot) and have more padding; especially in the ankle collar. Please get a pair of these and review them. I think you'll actually be impressed for once.

[@Jacorpes]

I didn’t realise that the ISOs actually have more padding than the regular SBs. I’m skating a pair of the wolf grey ISOs now and I was thinking they look a little chunkier on me than other people’s SB Blazers. The leather on them is seriously top notch too. They’re my first pair of Nike SBs in about 10 years and I’m very impressed so far

[@KB3AOL]

I would love to see you get your hands on some late ‘80s vintage Airwalk Prototype 540s. They were my favorite skate shoes…toe caps, ollie patches, lace covers, padded collars, style. I remember them being bomb proof, but I was also a teenager then. Sometimes memory doesn’t match reality.

[@spek-27]

The Prototype was the one with the big plastic ollie patch on the side, right?

[@jUQMtDmf]

A lot of brands have a 'regular' version and a skate version of their sneaker. Another interesting comparising video would be the Adidas Samba and the Samba ADV (skate) version. The shocking thing is that the skate version, which you would assume is made to last better, is €20 cheaper. Super strange when it's supposed to be 'better' quality.

[@simoncaton1226]

Adidas is really pushing the samba model. Would be interesting to see how it compares to the superstar and gazelles

[@Casavult]

Thanks for this, Rose. Skateboard community needed thia video. 👍

[@joshuaayala3477]

Another fine review, a shoe I would like to see you dissect is the Nike Air Foamposit 1. Again great job with the video.🎉

[@stephenlamley541]

Those light leather sb blazers are on my list, to add to my ever growing blazer collection. Love that shoe.

[@therodentryresistance95]

Hi, I've been watching your channel for a long time and learned a lot about leather with your vids. I would love for you to cut is half the Globe Mahalo, another skate shoe. I've got several of them and they seem to be much better than this Nikes plus they are much more affordable. Cheers from Spain 🇪🇸🤝🇺🇲

[@isaachall8373]

Need more of these skate vids they are amazing ❤

[@derlonzo6934]

On the SB version, the whole sneaker is made out of suede, which gives you the same effect as the protection adding, but better

[@DanielConvalescence]

Love the bayside shirt!

[@mississippster-qq7wc]

Weston, if you haven't seen Air yet, you need to. Although there's not a lot of shoe content in the movie, it does talk a lot about the manufacturing principles used for the prototype Jordans. Very cool stuff. And it shows that even in the mid 80s Nike was super cost-conscious.

[@Papa_shrimp]

Believe me when I say that a toe stiffener can do wonders I was skating in regular blazers a did a kick flip it landed on my big toe and I couldn’t skate for a week

[@frankmarvey5567]

The Nike SB Blazer GT Pro are designed to Grant Taylor's specs. I wonder how those would compare to these other Blazers, they are low tops though.

[@frankmarvey5567]

The Grant Taylor X Nike SB Blazer Mid would probably be the most comparable to the other Blazers you reviewed. They also seem more capable of holding up to the stresses of skateboarding than the regular Blazers.

[@wifiguy1603]

I would love to see the new Jordan 4 SB cut in half and compared to a normal Jordan 4

[@DSneakerTech]

Do the Jordan 4 SB compared to a regular Jordan 4

[@shanebep3135]

I agree with a lot of the other comments in that i think full grain leather would be too stiff on a skate shoe since you need that flexibility and dexterity to control flip tricks. I also think thats why the sole is thin too, in order for you to flex your foot during those tricks. I do think that they should redesign the liner and the gussetted tongue though, and lower the price of the shoe since they wear out fairly quick in other areas.

[@joho4700]

is the durometer of the rubber the same between both shoes???????

[@EPYCpeacemakers]

I’d love to see you do more skate shoes. 😍 the New Balance 1010’s are the skate show I’ve been most happy with, ever. Love to see them or other premium skate shoes compared. Thanks for your content, love it!

[@davicasagrande1620]

Honestly as a skater, the ollie patches would just be blown up in less than 2 sessions, because of the stitching, and if they were made like the normal blazers would just be a failing point, other than that, its cheaper. I love them to death when skating but, theres not much difference between the blazer sb and the normal blazer, i guess would be nice having a month where u test other skate shoes, i would suggest the jolins 2, they have one of the best outlsoles made by a tire company, would be nice seeing how they compare to the blazers

[@TheChadPerez]

Thank you for the video!!!

[@LonnieHutchinson90]

I’ve been waiting for this video!

[@andriipyshnenko3712]

Reebok Club C 85 vs Club C Vintage vs Club C TV Like 👍 raise to the top ❤️

[@StolenAlias]

You should do Novesta, out of the UK. They’re light but have a very high quality and finish for a sneaker.

[@aletseva]

you should have a look at the "nike air force 1 high alyx" its supposedly made of "high quality leather" retail price of the sneaker straight from nike was 440€ but now discounted to 400. just looking at the price i guess it has to have something special about it.

[@kelgbrown007]

It would be cool if you did a collabed with the shoe surgeon, made your ultimate blazer, and showed how much it would cost to make a good blazer.

[@whaiyun]

I would like to see the Jordan 4 vs the SB Jordan 4

[@mrleykis170]

Hey What’s up I have a suggestion for your next shoe cutting, either the air max slide or the MEGACrocs, keep up the great content, Cheers! ✌🏻

[@hostoner8780]

what is a ollie patch?🤔

[@tonyvolume666]

My favorite SB Blazer is the Donovan Poscipo Blazer Mid XT it’s Leather and has a THICK toe cap.

[@jack.f30]

I just learned about a shoe by Nike called the mayfly. It came out in 2003. And was designed to fall apart after one marathon race. If you can get your hands on a pair of those that would be super cool to see how it was designed to fall apart!!

[@Maximilian2045]

Wasn’t exactly designed to fall apart. It was super lightweight and designed for speed so they basically disregarded durability completely to keep weight down. In turn the sneaker had a life expectancy of 100km/60miles

[@etradeb4148]

I love this shoe for skating. Been skating for the past 10 years. They make a GT blazer that skates great too

[@dannygonzalez6548]

No bandsaw like the old days!! ❤

[@MastaKeahi]

My SB Blazers made it a month and then they started to come unstitched around the eyelets. And the best part is I didn’t even skate in them yet because I was on vacation.

[@betulaobscura]

Nice review!

[@maxschwarz617]

There are the "ISO" or "Orange Label" Nike SB Blazers which, most of the time, have leather (not suede) uppers. These have just a bit of pigment on top of the leather, like the SB Dunks. But i guess that would be the only difference. There could be some collabs that may have better materials, but i think the most interesting thing would be to look at the alternative brand "Blazer"!

[@porkflaps4717]

If your skateboard sneaker isnt stitched it's gonna blow out. I bought a pair of stitched DC's a couple years back and I have beat them DOWN, CANNOT kill them. Still going strong.

[@onixtheone]

My fave skate shoe is the Lizzie Armanto vans shoe. It can be a canvas alternative to leather. And it looks kinda like a blazer

[@2LilMurph1]

Skated them I love the way they feel and look honestly compared to all the other skate shoes I’ve used such as lakai’s, vans, DC’s, New balances, and circas. The only shoes I would say I enjoyed skating aside for blazers are Emericas.

[@birdman16.29]

please compare the jordan 1 zoom cmft to regular jordan 1 highs pls

[@mazharkhan4177]

please please please cut open the Adidas samba! I really need to know about that shoe if its worth it!

[@DVRMNaitor]

I wish the sold the zoom insoles separately

[@NoxiousPond]

The SB blazer is the better blazer for skating. I was happy to hear the SB blazer has an extra mm of rubber outsole too because my last SB was the leo and the upper held up extremely well but I blew a hole in the rubber outsole rather quickly. These new SB's with the react insoles are amazing for comfort and durability but the outsoles on them are paper thin and blowout waaaaay before the upper ever will. So quickly that I just went for a blazer low Grant Taylor. Time for just a more traditional skate shoe this time.

[@ThuggaManeLaFlare]

youre doing gods work exposing these crappy shoes thank you

[@vitorpanca4832]

Would love to see you cut the New Balance Numeric 808 and or the 1010

[@jcheeks36]

I would like to see you open up a Last Resort AB skate shoe. For years slate shoes have been made very cheap I think last resort has done a good job of upping the quality

[@durkskuntunemun]

I have a pair of SB Blazers cause they were on sale for 54 euros near me. Basically 40% off They're all black I'm a size 44.5 EU or 10.5 US and they only had size 44 and 46 so I got 44 They're cozy and fit really well actually.

[@JagrsMullet]

Nice Bayside shirt! Hope you keep doing more skate shoes

[@kalesan6887]

Rose Anvil you NEED to take apart and review the Nike Manoa Boot, especially the black one because I wanna know if it's actually leather

[@electricvehiclehead]

Maybe try cutting apart the Acronym Blazer Low? One colorway is ballistic nylon and the other is suede.

[@zakmudrow2160]

I posted this on the last blazer video as well, but you should find a NikeLab Blazer Studio Mid. These are the best. Your hunt for the perfect blazer will be over.

[@hollaforadolla3911]

can u compare the new jordan 1s to the jordan 1s from like 2020-2021? the quality feels even worsw now

[@mausball]

The irony of seeing a Nike Pegasus 40 midroll ad in this video is just /chef's kiss/

[@juvalighter]

Could you look into the Australian work boot brand “Oliver”

[@gucci_cucci4703]

You should review the erik koston sb blazers, beautiful pair and have much better leather quality than others

[@VADORT]

GREAT VIDEOS YOU MAKE

[@ecstasy_panda]

I don't skateboard anymore, but I still think it would be an interesting series to cut apart skate shoes to see what is the best build or most durable, like was done with mocktober or the white sneakers series

[@SourSkittoz]

I did have an SB Blazer mid and mines had a rubber toe cap that extended to an ollie patch. It was nice

[@jayjames6952]

I think the best Nike Blazer is the one that you design on the ID store. For any shoe that is a custom design, they seem to use better material as you are paying a bit more. They do this with several sneakers such as the AF1, Dunk Low, Dunk High, Blazers and 95s. I have pairs of both Nike Dunk Low and Dunk High, and the material seems to be a bit better. Try using the Nike ID store to create your own shoe and cut it open to see if the materials is better.

[@ЗакатРассвет-ы2ж]

thx for cutting the outsole with your knife

[@matts119ify]

I really enjoy your show and it is very informable. I would like to see a show that would look at different kitchen work shoes . I am a chef and I have tried many different bran's. I currently weatr a Keens bran and love them. I have used them for the past 5 years. I think that it is very important for kitchen employee to wear proper footwear. I appreciate your time and I hope that you would agree with me

[@ChrisPsneakers]

The king of BLAZERS is really a queen... "Goddess of Victory" Blazer Phantom Mid is hands down made from the best materials. Theres more padding in the sole, the leather is top notch... people have slept on these.

[@gustavomattos1535]

Good video

[@ridinggravity703]

the blazer sb was one of my favorite skate shoes i ever had

[@stephenlamley541]

So happy I got Mason silvas sb blazer actually ok normal leather for Nike anyway. 70uk well spent. Probably suade with s plastic coating i prefer full suade tbh. I saw masons shoes he skated and they were wearing pretty well tbh, so who knows. Definitely thicker than the normal junk leather.

[@tavooooooooooooo]

Apart from the OG sneakerheads, not many know the fact that the SB in Nike SB actually stood for Sandy Bodecker, and not skateboarding as many would have been led to believe.

[@Premier_Mike]

I feel like you should’ve put them on walked around in them or skate in them to see if you feel a difference maybe drop off the curb

[@evriesman5430]

Maybe you should try Blazer Jumbo , despite them having a lot more differences.

[@Gnurklesquimp]

I feel like I've seen at least 3 very distinct blazer models under the SB Zoom name... Add this to the previously covered examples of regular ones and premium ones, and I'm kinda lost.

[@Gh_cle]

Great video. Didn’t show up in my recommended for some reason. been subbed for a while now 🤨

[@JackBarrie-v9g]

do the blazer jumbos

[@daleheffernan]

Not a Blazer and not skate boarding shoe, but you should check out the Ride Concepts Vice Mids. Made specifically for mountain bike (dirt jumping and slope style) but would work great for skating.

[@brandonpaulin1595]

Do ASICS new skate line! Specifically the pair with the weird cutouts in the side of the sole and the old school soccer/baseball tongue. That would be DOPE and much APPRECIATED. Especially since they just started a skate line.

[@saramiller9529]

This is interesting. I don’t skateboard, but I bought a pair of Janoski SB Nike’s because I thought they were cool boat shoes. At least those were only $100 and you got a choice of flannel cushion insoles or cork insoles. Also you got choice of leather or fabric laces. Weird they make a collector shoe cheaper with some sort of options. Anyway, don’t know about SB, but good on the boat!

[@OffWhiteDaz]

I am so addicted to watching shoes being cut in half. Really is the only way to find out what's actually in them. Would love to see a video on the Nike X Off White Terra Formas. It's a different shoe and claims to have 3 layers of foam. They're not expensive either

[@soniarezgui5361]

Try the off-white blazer to See if it’s better

[@andreasz9543]

1mm thicker outsole is a big deal, I have to replace most skate shoes because of a worn through outsole. Having that one millimeter could be one or two more weeks of skating that shoe.

[@behhrian]

The inner gusseted inner booty I believe not only to act as a moisture wicking layer but also keeps the tongue centered while also securing your foot to prevent it sliding/shifting around.

[@pjf2193]

The only blazers I ever had were the mission sbs. Those were 🔥 and regrettably I sold them shortly after copping. Can't believe that was 18 years ago as it seems like yesterday. Yikes ! There's a pair half a size down for $350 but I'm not sure it's worth the risk, plus I only paid $85 retail for them back in 2005.

[@philiphanan1493]

The SB Blazers are only $$44.96-$55.96 each at Zumiez.

[@BookerT69]

Review the New Balance 990v2 Salehe Bembury! It’s such a wild shoe and the suede is wild cork insole and nice looking “leather” my favorite shoe

[@julienansay2979]

In 2023, skaters deserve what the best technology can offer. Nike is - as usual - moking is. Real skating brands - like DVs, Emerica, Osiris, Vans, Es, Etnies, Emerica, Globe - are offering 10 times better since late 90s

[@chaoticnewt5902]

Thin skateboard shoes are always a balancing act between trying to have as much board feel as possible and durability. The most popular skate shoe for like a decade was the Nike sb Janowski model, which was notorious for falling apart in a few good sessions, but most agreed they felt better than anything else. Doing tricks in things like those big chunky dvs shoes you showed is quite a bit harder and those shoes took forever to break in. It think from the outside looking in skate shoes can seem silly since all of the popular ones are suede socks with a 5mm rubber sole, but the vast majority of skaters would rather buy new shoes every 2-4 months (2-3 weeks if you’re real skate all day everyday kind of dude) than sacrifice any advantage in a hobby that is very difficult and fairly dangerous. It will be interesting to see what this generation of skater’s knees look like at 40 after jumping down 15 stairs with slippers on though.

[@turboman4635]

They make a premium plus version that has quite a bit of extra material.

[@DrDustan]

But was the durometer of the rubber softer or different?

[@sodachips9845]

Have you ever considered covering german army trainers? There are lots of brands making this style and I would love to see a comparison.

[@eldude831]

The es accell or etnies accell was to me the epitome of skate shoe fat laces triple stich and mostly leather. They wer bomb proof. But lots of people wore the dc shoes even tho they didn't skate

[@doripanda]

There is leather SB blazers too, and Grant Taylor 2s are half canvas

[@audiwankenobi361]

I haven't purchased a Nike shoe without air tech in a very long time. The Cortez will be my only exception.

[@klovor]

I would really like to see you guys cut a foamposite in half, and do some more of the very weird nike soles like the nike ispa road warrior, the nike mmw 004, and sacais crazy soles

[@1jonrutherford]

Love your videos, I have a pair of the sacai Nike blazers which seem to have a bit more padding and a double tongue, hopefully you could cut open a pair of them

[@ronrondrewthat]

Love the channel and what you do. From the beginningI was thinking the SB Blazer Premium Plus. Probably the same results but some differences for sure. Thanks 🫡 👟 👞 🥾 👠