Rost Martin RM1c Great New Gun for under $500

Рет қаралды 2,729

The Bucket Shall Not Be Infringed

Күн бұрын

Пікірлер: 41

@CaseyCalamity 10 ай бұрын

Berreta magazine fit with some modifications

@theBucketshallnotbeinfringed 10 ай бұрын

Ok, good to know! Thanks

@ToneKShoneMackDavie-ij5qo 4 ай бұрын

Nice 🔥🖒👏💯

@theBucketshallnotbeinfringed 4 ай бұрын

Thanks for supporting the channel!

@settleschris1965 10 ай бұрын

It’s a knock off of the Arex Delta. But I like it.

@theBucketshallnotbeinfringed 10 ай бұрын

It is a nice looking gun for sure. They really did a good job on the look of this one.

@rodgerm5311 10 ай бұрын

Just a word of caution. I own the FDE model and it has a problem feeding HST ammo. Every one of my 4 magazines will have at least one failure to feed. Not good for a self defense pistol. HST is the only defense ammo I use so it should feed properly or it will just go to the safe. I sent it to Rost Martin twice to analyze this problem and they sent it back saying they could not duplicate the problem. Apparently they did not try HST ammo because of the cost. I have tried to put 250 rounds thru it with no luck. I was hoping it would just need a break in period. I polished the feed ramp and chamber so it is slick. This is a very nice firearm but........... It is a shame a new company has to have problems with its first run of guns. I will just continue to carry my M&P 2.0 Compact, which has been flawless.

@theBucketshallnotbeinfringed 10 ай бұрын

I'm sorry to hear you are having problems with feeding. I did not run hollow points through mine. Unfortunately, it is not uncommon for new guns to have these problems. I'm sorry to hear Rost Martin did not get it up and running for you.

@JoeR511 10 ай бұрын

I appreciate this feedback as I also carry HST.

@chrisb9478 10 ай бұрын

Sorry, that stinks. Try some Hornady Critical Duty. It’s good stuff, we carry the 135gr+P at my old dept. I attended 5 ballistic tests, tested it against all the other main brands and it performed the most consistently through all barriers. I wonder if yours has an extractor issue, since you polished the feedramp & chamber. I’d polish the breechface & look close at the extractor.

@jameswilliams-xu4vi 9 ай бұрын

I just watched a video where the demonstrator ran HST through the pistol with no problems. Maybe it’s a different issue. wvgunsandandgoats. Check it out for yourself.

@richallsup 9 ай бұрын

I’m having the same issue man, bummer. I’m sending it back today… if it cannot reliably shoot one of the most tried and true handgun ammo out there it’s kinda just a toy at that point

@Jkeller2385 Ай бұрын

Nice john wick reload 😂 i dig it

@theBucketshallnotbeinfringed Ай бұрын

Thanks, I have fun!

@ralphcarroll5090 10 ай бұрын

The AREX Delta Gen 2 is manufactured in Slovenia not Croatia.

@theBucketshallnotbeinfringed 10 ай бұрын

My mistake I should have said Slovenia, just messed that one up. Good catch

@tymemachine5179 10 ай бұрын

As always another fine review.

@theBucketshallnotbeinfringed 10 ай бұрын

Thank you. This is a cool gun. I think they did a bunch of stuff right on this one.

@MartinVeneroso 10 ай бұрын

Nicely informative video on an interesting new handgun - thanks! I do have a couple of quibbles (of course I do, anal pedantry is my life, after all). First, Czechoslovakia dissolved in 1992, so the company that worked with Rost Martin isn't located there any more, if it ever was. Second, are you sure that the indicator on the back of the slide is a loaded chamber indicator? It seems much more likely to be a striker-cocked indicator.

@theBucketshallnotbeinfringed 10 ай бұрын

First of all thanks for watching the video and supporting the channel by leaving a comment. You are correct Arex is a company that manufactured the Arex Delta and you are correct in they are located in Slovinia not Czecholslovakia. Also you are correct in that is not a loaded chamber indicator. It is to show that the striker is cocked. For whatever reason I always call those a loaded cheer indicator. I will work to be more precise in what I say I'm the future. Again thanks for supporting the channel!

@anarchyscorner 10 ай бұрын

Did you ever get rid of your Beretta 84F?

@theBucketshallnotbeinfringed 10 ай бұрын

Yup, the Beretta was beloved, but I traded it for a different gun for the channel. Mis, that cool gun!

@anarchyscorner 10 ай бұрын

@@theBucketshallnotbeinfringed I was gonna say Allegheny arms makes threaded drop in barrels for 80 series now. Would have been a coop addition to your 84

@toddparsons2980 10 ай бұрын

Good looking pistol. 👍

@theBucketshallnotbeinfringed 10 ай бұрын

Yeah they did a good job on this one. Thanks for supporting the channel!

@mikebaker3662 5 ай бұрын

How much do the mags cost from RM ?

@theBucketshallnotbeinfringed 5 ай бұрын

Their website has 17rd mags for 24.50 www.rostmartin.com/product/rm1c-17-round-extended-magazine/

@jamessirianni6506 3 ай бұрын

Are the optic plates metal or plastic?

@theBucketshallnotbeinfringed 3 ай бұрын

Comes with one metal RMR plate

@jamessirianni6506 3 ай бұрын

Thank you

@Noneyurbusiness 10 ай бұрын

If it didn’t have that stupid exposed firing pin I would buy one but I absolutely hate the look of that poking out the back

@theBucketshallnotbeinfringed 10 ай бұрын

Fair enough. There are some features that really irritate me as well. I just can't get past them.

@MrSteveb1 10 ай бұрын

They ripped you off bro, $399 here

@theBucketshallnotbeinfringed 10 ай бұрын

Sounds like a really good price! Thanks for supporting the channel!

@chrisb9478 10 ай бұрын

I’ve seen as low as $357 online. Dahlonega Armory

@theBucketshallnotbeinfringed 10 ай бұрын

@@chrisb9478 Great catch! Thanks for spreading the word!

@DeathmetalPersian 10 ай бұрын

Not sure why you would buy this over a CZ p10c or p10s which are the same price if not cheaper and have cold hammer forged barrels and better ergonomics, less snappy, less recoil, and a track record of quality control fixes to make it a reliable product.

@theBucketshallnotbeinfringed 10 ай бұрын

The CZ definitely has a longer track record for sure. And CZ is a company that is not going anywhere anytime soon. But I definitely did not think it was snappy at all. No more snappy than a p10. And this gun does come with a RMR plate.

@DeathmetalPersian 10 ай бұрын

@theBucketshallnotbeinfringed CZ usa def dropping the ball on keeping parts available. i had to order my rmr plate from oversease too its a shame it didnt come with the gun hope they fix that in the future. but idk the recoil shots reminded me a lot of the hellcat which i think feels terrible to shoot.