Rotary Casting Machine Test

Rotary Casting Machine Test
FYI for all you people looking for plans try this link on eBay I did not use them or know about them when I built mine.
dc9apu
www.ebay.com/itm/Plans-DIY-Ro...

[@t1mmy13]

Funny how the shortest videos are always the most helpful. Helped me understand how to build one of these that much better because of the video, explained a pitfall I should look out for and gave me a testing method. All in less then 90 seconds. Thank you so much dude

[@dc9apu]

Tim I am glad I was able to help yo. Thank you for your reply

[@DisgruntledPigumon]

This is a VERY IMPORTANT video. That’s a simple mistake that anyone would make, and this shows how to fix it. Not to mention using a cheap clear plastic bottle for testing. So easy to see the results. Great!!

[@scryptoman-ei9le]

9Lq

[@wYatt121509]

I just subbed friend. Been looking into this for molding clear, small spheres. In my research there were a few things that were unclear. You sir, in 1:23, cleared this up better than anyone. Thanks and happily subbed. God bless.

[@dc9apu]

you are welcome . i was curious and did this to satisfy my curiosity. glad it helped you too

[@ekopurwadi]

Whoaaa!! Simple but important!! I'm about to make a rotational mould for resin. Thanks mate

[@The_Wosh]

Huh, never thought of using a plastic bottle to test if it coats the inside completely, clever

[@dc9apu]

thanks

[@bobonono8544]

Thank you so much for this video it's very good

[@dc9apu]

glad you liked it. the info needed to be out there. Thanks for the nice comment.

[@jasperjanderson]

Great tip well visualized!

[@dc9apu]

glad you liked it.

[@eliagiosueconti2531]

deep shit man!!!

[@jipstips]

Im actually wanting to make a rotomolded silicone bottle, so my question is, did the bottle work as a mold? Were you able to extract the silicone afterwards?

[@dc9apu]

this was a test. I wanted to see if paint would cover the inside of the bottle.

[@DisgruntledPigumon]

Well, you’re not getting the outer shape with the threaded top, you’re getting the smooth inner shape. The right way is to make a mold of the bottle, then cast from that.

[@dc9apu]

@@DisgruntledPigumon I am not making a mold I am checking the coverage of the machine

[@useramigosparasempre]

Você vende a máquina

[@jeromyashcraft4571]

Are there plans available?

[@dc9apu]

Jeromy: I have not seen any plans. I got all my information from looking at video's on KZbin.

[@dc9apu]

dc9apu 1 second ago Found these on eBay maybe it will help you. www.ebay.com/itm/Plans-DIY-Rotocaster-Rotocasting-Machine-Cast-Resin-Plaster-Latex-Etc/112443385608?hash=item1a2e25e708:g:xRAAAOSwQJhUb5zG:rk:1:pf:0

[@richardlamer3910]

Don’t buy EBay when there’s TONs of free DYI..just watch this video : m.kzbin.info/www/bejne/ZnrWiK2jjM9ga9E

[@finster101]

I would also like to know what plans you used or did you design this yourself?

[@dc9apu]

Watched a bunch of KZbin video's and made it from there. Only one said anything about the bevel gear drive ratio That is where I had my problem. It is easy to build I used 2"x 2" for the center boxes and 2"x 4" for the frame. Used bronze bushings instead of bearings. Had the chain and sprockets from other projects, Bevel gears came from old riding lawn mower transmission. Lots of luck. Ron

[@dc9apu]

I have not seen any plans. I got all my information from looking at video's on KZbin. I designed it myself. Thanks for watching.

[@dc9apu]

Found these on eBay maybe it will help you. www.ebay.com/itm/Plans-DIY-Rotocaster-Rotocasting-Machine-Cast-Resin-Plaster-Latex-Etc/112443385608?hash=item1a2e25e708:g:xRAAAOSwQJhUb5zG:rk:1:pf:0

[@finster101]

@@dc9apu Thanks for the info and quick reply.

[@dc9apu]

You are welcome. I hope it helps you build one.

[@Lee-qp6gf]

I would like to what the point is.

[@dc9apu]

To make hollow resin castings. I really just wanted to paint the inside of the plastic bottle.

[@ramluma]

The outer frame should turn about 7 RMP, and the inner frame should turn about 2 RPM, or about 1/4 the speed of the big frame.