Rotary Compressor Operation

Visit www.hvacrinfo.com for more HVAC/R technical and reference information.

[@SuryaGanjoo]

Very nicely explained. Thanks!

[@Cut_edits-4hk]

best animation and best understanding

[@watermelonmelon]

Thank you!!! This video really helped me!!

[@ApurvaKhartad]

Very wel explained. Thank you

[@gregmcbrien2106]

the animation is actually wrong! once the compressor is charged with gas, the cam separates high pressure at the output and low pressure at the input. the cam is increasing the volume on the low pressure side, as the animation shows, but simultaneously, the output trapped volume from the previous rotation is squeezed into the output. the operation is exactly what medical pumps use, a peristaltic pump, squeezes a pinch point and drives the slug of mass from the input to the output.

[@DrFreeeman]

Exactly, it's always compressing or releasing refrigerant on one side while SIMULTANEOUSLY taking refrigerant on the other, and it needs one rev to compress it, not two.

[@freddypurnomo8722]

how can the liquid be sucked up even though there is no fan with fins ? ( like water pump)

[@dyrusstalker8028]

​@@DrFreeemanyes i feel like u are right

[@dyrusstalker8028]

​@@DrFreeemanit take 2 revolution for the first time and then, one rotation for the rest

[@DrFreeeman]

@@freddypurnomo8722 the pressure differential forces it into the compressor, you don't need an impeller to do that

[@dextertevera5256]

Very clear and understandable..thanks👍

[@0123456789Irvin]

Nice explanation thank you

[@nopoil]

It is so useful! Thank you!

[@rpscreations1036]

Super animations...

[@Ishaan.Srivastava]

Thanks👍

[@NETWizzJbirk]

Looks like it needs a second valve to prevent the co pressed gasses from being pressed out the suction side.

[@DrFreeeman]

Nope. They are held on the high side by the rotor having 2 points of contact, one with the vane and the other, sliding against the chamber wall. A reciprocating compressor would need a suction side reed as the vapor is both taken in and compressed in the same chamber whereas by virtue of it's design the rotary vane pump creates 2 separate ever-changing chambers where, while one is compressing refrigerant the other is at the same time taking refrigerant in and when the rotor loops back around past the vane it will start to compress that refrigerant.

[@adwaithc6239]

Supper appa supper 🤘🙌

[@pranavps4380]

Super....

[@madhusudhanarao7016]

Super

[@pranavps4380]

Love u sir

[@stephenjenkins5398]

Does the direction rotation work either way. ie could I run a compressor anti clockwise on a car

[@MegaDysart]

No the discharge Reed valve will not open and close correctly if the unit is run in reverse

[@krishnamurthymc1292]

Thanks

[@jamescole3152]

You don't explain why it takes 2 revolutions. Seems like it would work every revolution.

[@trevmint5615]

Yeah, I think it is every revolution.

[@shahrukhchikhalkar7026]

Sir can u plz explain me how the rotry compressor keep Cool on running position

[@MegaDysart]

Refrigerant cooled

[@sidhikantajena7539]

👍 👍 👌 💛

[@youretootiredios5783]

What springs?

[@DrFreeeman]

There is a single spring holding the vane against the rotor. It is not shown in this animation, which is a bit of a mistake. Along with them saying it needs 2 revs to compress, while in fact, it needs only one.

[@aravindmk4073]

Reciprocating compressor is better

[@RrRr-th1kf]

Whirlpool is rotary compressor …. But just look at the cooling is very very strong 💪🏽 for example whirlpool 2.5 ton split … give in T1 is giving 29000 btu and in T3 give 24225 btu …. And there is Reciprocating compressor give in T1 26500 btu and in T3 give 22000 btu only …. Now which one is great and better in cooling…. It depend on AC brand and quality brother

[@aravindmk4073]

@@RrRr-th1kf cause whirlpool has highest technology it is an American company

[@RrRr-th1kf]

Aravind MK yes … whirlpool is great AC in india also …

[@malayaliboy]

@@RrRr-th1kf ♥

[@athulraj05]

ഞാൻ വന്നു 😂

[@krishnaprasad-px2zm]

How much pressure in new 1.5 ton ac compressor

[@WARZsonic.official]

සා වෑව් 😅

[@Shivamagrawal50]

Play it on .25x thank me later

[@arpandey4766]

Great.....your efforts, knowledge and ability to communicate is good enough for me. Thanks

[@AdinathBirajdar07]

Thanks 😊

[@chinguanwei887]

can i check for the 2nd discharge, the shaft will be rotated three times ?

[@rpscreations1036]

Thanksss

[@jamshedaalam9045]

Why it has circular shape? Can't be like roatatory engines. Triangular type design?

[@jamescole3152]

So you want to take something simple to make and turn it into something complicated?

[@fttech2805]

good work

[@geraldbongpresentesabejon7138]

The best! That's so kind of you!

[@dmvhvactech]

Nice thanks

[@saradhipapisetti1265]

Nice video tq

[@ankurnath8872]

Nice

[@omowunmix]

Awesome

[@aravindms3855]

Good ✨

[@mishabmissu9155]

Supper

[@jamescole3152]

What's for supper?