Rotary Polishing and Ceramic Coating Live

[@leardi58]

You guys make a great team as always a job well done 👍

[@Detailers-Business-Academy]

Thank you

[@DetailingMadeSimple]

Can't wait to apply the DIY detail coating. Thank you for all you and your wife do. Very informative wish. I caught this stream early. Was caught in a middle of a job.

[@Detailers-Business-Academy]

Thank you, if it brings up any questions, happy to answer.

[@tugbankert6581]

I hated polishing the sides of vehicles until I got the racatac. It never use to be a problem when I was younger but that tool has added years to my career and makes it so much easier to see and polish on the sides of vehicles

[@Detailers-Business-Academy]

Agreed!

[@JakeyDill]

It’s been paramount for my livelihood. My colleagues make inappropriate remarks with regards to its configuration, but alas, very comfortable.

[@mas5040]

The Man! He speaks with confidence about the rotary. I was on the edge of buying the Rupes rotary but after seeing this video I am even more sure that it will be part of my arsenal. Once again Yvan is the true guru of detailing. Thank you for the knowledge.☮

[@Detailers-Business-Academy]

Thank you, far from a guru, I just have a little experience.

[@thesamsquatch5224]

Great video and very good learning experience! I really enjoy your process and the bronco looks phenomenal

[@Detailers-Business-Academy]

Thank you

[@davidruggles996]

Sorry to miss the live but thrilled to have the opportunity to watch you two work. I feel very validated to see that your enhancement & coating process looks much like mine. Thank you!

[@Detailers-Business-Academy]

Thank you for watching.

[@neilwalker5041]

Beautiful work as always and the lessons learned from watching you two work. I hope you like your Bronco Sport as I have one on order myself. Thank you for the knowledge and I will be waiting for the pads and spray polish to be for sale.

[@Detailers-Business-Academy]

Thank you

[@1stfrompuertorico568]

Great content and teaching

[@Detailers-Business-Academy]

Thank you

[@onrdetailingnews802]

Nice shop for detailing

[@Detailers-Business-Academy]

My daughters garage.

[@hernan2838]

Hey I hope everything is well I have a question and maybe you could talk about how to cut down on time during their details! How long should it take for someone polishing the whole car by themselves?? It takes me about 4 hours to polish then coat so 5 hours in total then 2 or less for the decon, how could I cut down my time or does this seem about right?

[@Detailers-Business-Academy]

Good news, you have room to improve. 30-45 mins for the wash and decontamination, 1-2 hours to polish and 20-30 mins to apply the coating .

[@Ecdetails]

How did I freaking miss this haha 😂 soooo good, Yvan for the flex rotary can you use any pad ? Or did have to buy the lakes country backing plate

[@Detailers-Business-Academy]

Thank you, I use the Lake Country backing plate. Yes you can use any pad, but I prefer waffle pads.

[@maximelefebvre8987]

Utilisiez-vous le pad washer avec tous les marques de polie? On ne voit que très peu cette technique autre que avec des polie liquide/spray.

[@Detailers-Business-Academy]

J’utilise sans exception un tampon de polissage propre et humide. Le liquide de polissage n’a pas d’importance.

[@maximelefebvre8987]

@@Detailers-Business-Academy 👍 merci, je vais faire ainsi au printemps!

[@Tundra_Guy]

How long can you let the coating sit on the paint before it needs to be leveled off?

[@Detailers-Business-Academy]

1-5 minutes depending on temperature and humidity.

[@TheSvoboda]

In your shops Yvan, I know you said your pre rinsed all cars to be standard. Did you prespray with ONR on every car before pre rinsing too?

[@Detailers-Business-Academy]

No we used low pressure steam.

[@TheSvoboda]

@@Detailers-Business-Academy so steam, and then rinse?

[@Detailers-Business-Academy]

We used the steam pressure washer to rinse. It was 250psi at 330f, and 1/2GPM.

[@onrdetailingnews802]

Great 👍channel new subscriber tfs

[@Detailers-Business-Academy]

Thank you

[@TheSvoboda]

Do you still like/endorse (for lack of better term) Roar coatings?

[@Detailers-Business-Academy]

Yes, it’s one of many coatings I use.

[@TheSvoboda]

@@Detailers-Business-Academy quick shop question. Did you have a yearly towel budget, or did your towels mostly last a long time?

[@Detailers-Business-Academy]

Towels lasted a very long time, the washer and dryer worked 4-6 hours a day. We didn’t throw out towels for coatings, instead after using them we dunked them in the wash bucket before the ceramic could cure.

[@Tundra_Guy]

What speed was the rotary set on? I'm assuming 1?

[@Detailers-Business-Academy]

Speed 1, 400rpm

[@steverosenthal5723]

With the paint prep windex & acetone. What grade acetone should you use?

[@Detailers-Business-Academy]

Standard hardware store grade.

[@mariah.garridor.6997]

​@@Detailers-Business-AcademyMr. Lacroix, can that windex/acetone preparation be used safely on any hard surface that you want to apply ceramic protection to?

[@steverosenthal5723]

With the DIY ceramic coating, is it stackable? Can u put multiple layers?

[@Detailers-Business-Academy]

If you wish, yes.

[@tylerdominiak3210]

Is that cut on 600rpms?

[@Detailers-Business-Academy]

Yes

[@GstarCurtis]

What spray polish is that?

[@Detailers-Business-Academy]

The DIY Detail Gold Standard Polishing System

[@1stfrompuertorico568]

First nice!👍👍👌👌

[@Detailers-Business-Academy]

Thank you

[@mathglitch4543]

Le son du vidéo capote un peu

[@Detailers-Business-Academy]

Oui malheureusement un live c’est pas facile.

[@1stfrompuertorico568]

First!

[@Detailers-Business-Academy]

Thank you