Roubo Vorderzange - Roubo Leg Vise

[@nataliepotter3635]

I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great kzbin.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

[@thecraftybushman5376]

A pleasure to watch a true craftsman at work.

[@dimaskrolman6231]

Ich bin Brasilianer Nachkomme Deutsch. Ich spreche kein Deutsch , aber ich verwendet, den Übersetzer nur sagen, wie ich an diesem Tisch Ich wünschte, ich hätte eine von ihnen ist ein Traum verwunderte. Herzlichen Glückwunsch !! Unterzeichnet: Dimas Krolman

[@cesarestrada8750]

La verdad no tengo palabras, como trabaja y verlo es un deleite con todas esas herramientas, gracias por compartir este video. atte. César

[@Bk99JzM]

Witam i pozdrawiam!!Bardzo pomyslowo wykonany stol stolarski,duza wiedza,duzo pracu i cierpliwosci w ten stol wlozono!!Ciekawe wykonastwo!!Prima!!Dobry material Filmowy!!

[@thecobblers7068]

Wow after seeing the vice in action (3 years after it was posted haha) I fully understand the advantage of the steel wheel. It may be a little while until we can get a vice of this caliber into our shop, but i have no doubts that it is a must! I even dreamt that there was one on my bench!

[@itsbeendays5351]

I built this bench with some minor modifications. This video, along with the other on the wagon vise, really helped explain the installation of the vises. I found a great article on cutting Condor Tails, which are the very large dovetails on the wagon vise in a back issue of popular woodworking. Cutting the " Chop", which is the large recess cut out for the leg vise was made much easier with that same set up of the large guide bars supporting the fences on either side of the router. It is not an inexpensive or quick project but well worth your time. Guido's skill is exceptional and the video makes the process much easier.

[@JB-th2jv]

I'm also building this bench and have been looking for the large guid bars, do you know where to find them?

[@smailbeg8691]

finalna obrada stolarije

[@DundoMarinko]

Awesome work all the best from Chicago that is good for next 150 years ,

[@kennywickham]

I would also like to know more about the drill press. Also a great video.

[@ignaciocanon3702]

wow im impressed by the precision and the quality

[@stedinuriburu]

Excelente!! Un trabajo muy detallista, que genera placer verlo. Lo felicito. Muchas gracias por compartir, salu2 desde Argentina

[@barrysahd7653]

Well done! Clean workshop, accurate precise workmanship....a beautiful Roubo!

[@fordboss9275]

I love the Roubo style woodworking bench, wish I could make and use one!

[@alex.germany]

Wie immer geniales Video von Guido Henn. Auch wenn mich die Musik langsam etwas nervt. Hatte heute ein Telefonat mit Festool. Ratet mal was da für Wartemusik gespielt wurde :-). Aber die Videos sind absolut genial! Ach ja: Genial finde ich, dass er in diesem Video wirklich mit grundlegenden Werkzeugen arbeitet und keine Super-Duper Spezial Maschinen einsetzt, die eh keiner zuhause hat...

[@SuperKwame1]

Why are these selfish guys coming out here & pointing down on this guy that has spent time, his own money to put out theses great videos, ? My question is this ,Is it because they know it and do not wants us pay them to buy it from them, or they they don't people like me to know?

[@robertdelcuore8530]

SuperKwame1

[@AbnormalAxis]

I'm just here riding the elevator......

[@JulianoMarcello]

Tolle! Herzlichen Glückwunsch zum Kanal und vielen Dank für das Video und die Tipps! Umarmungen hier aus Südbrasilien 🤘🏾👍🏽

[@drestanmiller6716]

Wonderfull - VIELEN DANK - Sehr GUT & usable 2 learn & distribute this amazing knowledge!

[@NikonNigel]

Great video showing multiple jigs being used for great results.

[@jricard0745]

Beautiful workmanship, great care in fixturing for best results. Are there drawings / plans? And parts lists? And, forgive me for asking for so much, but I'd like to also know more about the drilling tool (arms, etc,). Thank you for the time, effort, and inspiration (seeing great work).

[@kierangoddard2198]

Excellent workmanship.

[@marksteven3534]

I have a Harbor Freight workbench and it comes with storage drawers and works great.

[@hugochiroque2613]

Eres un genio en tu trabajo ojala llegue a ser tan bueno como tu...Gracias x tus conocimientos que publicas al subir videos bendiciones y éxitos siempre.. Saludos dese perú.. 👍

[@reinaldobarba8483]

Hello! Besides the great idea, also I enjoyed the drill holder which is shown in the video. It would be possible to send information on this support or the link to your manufacturer? thanks

[@gg_crafts]

It's a wabecco

[@jrdelves3871]

Why do I feel like I'm on-hold with the cable company?

[@thecraftybushman5376]

I was thinking more a 1970's porno movie! Great skills nonetheless!!

[@hildaaraujo2407]

Congratulations, There are many professionals unable to afford such equipment from the video, now they will be happy to make their own equipment, forcing the industry to sell cheaper.

[@livinglegendwr4650]

The drill stand is from Wabeco. They have a website. I am almost certain the drill itself is Fein.

[@sharpeguns1]

For real good threads fill holes with boiled linseed oil, keep full for 24 hours. Threads will cut and be strong after 24 hours.

[@juginstr1019]

You are a true master!.Thanks a lot.

[@demonwolfish1]

eine top Arbeit.

[@twoweary]

Nice work. Speed set at 1.5 makes it easier to watch , and the music is more lively ! :-)

[@jedsada4018]

I like your drill holder.

[@mmanut]

Fantastic, loved every second of it.

[@adylih6631]

What kind(brand) of drilling machine did you use in this video? It looks like very precise.

[@hugoleopoldobravochavez1791]

Mi querido ingeniero, te quiero mucho.

[@luxlarryj656]

Please tell me about your drill press/drill holder.

[@armandohernandez3424]

HERMOSO MUEBLE Y VERSÁTIL, MULTIFUNCIONAL, GRACIAS POR MOSTRARLO.

[@HectorRodriguez-bu4lp]

sorprendente.aunque sea artesanal tratare de hacerlo.un abraso desde Chile

[@sajadwoodwork]

Nice work sir please keep it up

[@alfredodamianvargasnavarre3655]

Muy bien hecho todo el video. lo hacen tan sencillo que párese muy fácil que encantado

[@StephenPugh56]

Love your pencil gauge.

[@RyceFiveZBeats]

watching this was pure pleasure for me

[@williamkiker6825]

how to use a table saw

[@gg_crafts]

Does anyone know what the name of the drill being used on the wabeco stand is?

[@almarc2005]

Amazing and perfect, impossible to deny. Keep it up!

[@rootvalue]

Hey partner, you can show a 5 second clip of a milling operation and the viewer will infer the operation was longer than shown on screen. No need for exhaustive coverage of routing. 😅 Good work nonetheless!

[@ismaelabed4836]

nice and precise job.

[@erikkuba-konserwacjairenow7840]

Hey there great job. Can you please tell me what is the brand of your drill stand newer seen one like that. Best regards erik.

[@alt-w7130]

He did not say a word in English, but I understand the whole video......Thanks

[@gg_crafts]

Over 1yr later and I still don't know the name of the drill in the wabecco stand. I'm looking to purchase that stand but would like a good accurate drill to purchase for it, so please, if anyone has any idea, would you please leave a comment. Thank You.

[@livinglegendwr4650]

on Wabeco website the stand has a couple different drills pictured. One says Kress and that looks close tot he drill in the video.

[@JessCretney]

Very nice, but you need some fancy toys to make that toy, and that hardware is top-o-line. I did a much less complex and expensive leg vise on my channel, but I will say yours is the most fanciest of the fancy pants leg vise designs!

[@TheKeenMechanic]

Hello Great Video, you are very talented! What is the name and brand of drill press/stand that you are using with this Protool drill please ? Also what model is this protool drill? Thanks

[@guzzi73]

Vladimir Petrov www.wabeco-remscheid.de/bohrstaender-zubehoer/bohrstaender-fraesstaender/bf1240-saeule-500-mm-ausleger-350-mm.html

[@dirkpieterse3179]

Hey friend. It's like watching paint dry !!! But good work

[@Léooveleiro]

Восхитительно!!!

[@alexbertozzi]

great job

[@antonioevaldo96]

Muito bom 👏👏👏👏👏 Toni do Brasil

[@wayd19]

I like your videos but this song is killing me :)

[@onebelligerentbeagle]

There's a hole in his bucket.

[@edwardcharles9764]

Agreed. Similar the endless routing footage was pointless. If you're going to make someone watch, at least get in closer so they can actually see the router cutter and what it's cutting, as opposed to the entire router moving in something you can't see because of the camera angle!

[@robertoheinrichdidier1426]

wayd19 mo io

[@davidcourt4749]

I like the endless routing footage as it shows something not usually included in videos, good technique over the length of the project.

[@abuzarkhan8449]

there's a volume down button in you device, if you bother to press it !

[@danwatson3944]

What make is the radial drill press/guide? Not come across one that isn’t a stand alone press and that instead accepts a corded drill

[@hugoleopoldobravochavez1791]

Eres un Alemán mecánico magnífico. Los quiero tanto como a los indues, que sé que ustedes también los aman. Desde México

[@eddieq1905]

Great video man!! Bravo

[@josedanieltenjoguerrero2133]

a good job, you do not have a manual with the dimensions to build the table, thanks.

[@jackierudd2010]

Pure joy to watch ! Thanks

[@joepalooka2145]

Us poor guys who can't afford Festool just use a tail vise with the old-fashioned leg support and it works just as well.

[@isaacstrokes4279]

¿donde venden esto?, ¿como comprar esto?

[@Cesargaiolas]

Favor me informar onde consigo este suporte para esta morsa de bancada?

[@king23mamba24]

Very good job.. What kind of drill press have u used?

[@StephenPugh56]

That was brilliant. Thank you.

[@jean-claudefrancois1839]

tres beau travail minutieux qu'elle est la marque de la colonne de perçage SVP merci

[@Carpenters_Canvas]

I cant believe i will have to use a tap, lol... but all that aside i cant wait to install it and use it, building my first real work table. If i have to use a tap, I have to use a tap, I have them lol curious about those drill presses though.

[@HiluxProjectVlogs]

Hello , good afternoon . I'm from Brazil and I wonder where I can find the support of the drill machine used in the video. I await your response. Thank U.

[@jaladao]

OI BOM DIA CARO AMIGO PROCURE NO SITE DA FESTOOL BRASIL TENHA UMA BOA TARDE

[@jaladao]

wsequipamentos.com.br/index.php ESTE É O SITE

[@ciprianokritzinger3636]

Top craftsman, looks like good quality. It's just the music I hate, it's like an ear worm.

[@lukeshoot]

I wonder how much the woods itself cost.....

[@motigoshen7591]

Very nice. Where can I bay this vise set.

[@leksey7870]

A good vise!

[@kennethconner9244]

Like many, I would like to know the name brand of your drill press? Thanks.

[@jerrysmigiel7998]

+Kenneth Conner Yeah right. that is one kick butt drill press.

[@Schorschiism]

Looks like a Wabeco drill holder: www.ebay.de/itm/like/141938965499?lpid=106&chn=ps&ul_noapp=true

[@StCreed]

+Schorschiism That is a fantastic drill press. The first one I've seen so far that I can actually use over the side of the bench to drill into a door or large frame.

[@eliasnavarro4550]

Has anybody had any luck trying to order the drill holder? I searched on Ebay USA but they don’t have it, it seems there it’s only sold over seas

[@mickleblade]

pro video, methinks the sound of a router is better than the lift music tho

[@Patrick-kc5ur]

Need more info on the drill stand!

[@Schorschiism]

Looks like a Wabeco drill holder: www.ebay.de/itm/like/141938965499?lpid=106&chn=ps&ul_noapp=true

[@michaelschiemann7156]

Super Video. Was ist das für ein Gewindebohrer?

[@garen_g2956]

I like your drill press. Who's the maker? Thank you.

[@jaimesimon744]

Hola. Dónde consigo la columna para el taladro vertical. Esa se ve que tiene la función de calibrar los lados.

[@darkopetrusevski2354]

leon prok

[@22tabak]

Jaime Simón qq

[@Cameralight]

Aqui la tienes, parece muy buena www.ebay.de/itm/like/141938965499?lpid=106&chn=ps&ul_noapp=true%EF%BB%BF

[@jaimesimon744]

Gracias. SAludos, amig@

[@GKChandlerBooks]

Nice job. Very nice craftsmanship. Video is too long. Various segments could have been accelerated at 2x, 4x speed etc.

[@fernandocastillo8187]

Does anyone know what type of extension is he using to drill the main screw hole with the forstner bit?

[@guidoaguilar9076]

Excelente.!!!

[@Billlupton]

Guido, Bitte, where do you source the aluminium chanel us use in your frastich build I have a sister coming from German in 2 weeks she might bring some pieces

[@apinakapinastorba]

What type of wood is good for work benches?

[@eduardovillegasreis7903]

Good Morning. I would like to know the make and model of this drill bench that you use this video. Grateful.

[@joseramonmorterafernandez7902]

Eduardo Villegas Reis

[@fredflintstone8048]

Tapping a hole with a hand held drill motor is not the best, even though the holes were drilled perpendicular by the drill press. As seen, the hand drill will wobble cutting irregular weaker threads. Also, a tap will not always track straight in the hole just because the hole is true. It would be better to have a variable speed motor in the drill press and use that to run the tap into the hole if possible. I use a drill press for drilling and then tapping into wood or steel. After drilling the holes I remove the belt and turn the pulley by hand.

[@edwardcharles9764]

I would of used a larger tap and more of a buttress thread. That looked around 8mm fine, fat too puny for wood.

[@NikonNigel]

Forgot to mention in my previous comment the radial arm drill, never seen one like that before and with help of other comments have located them in Germany, thank you all.

[@Андрей-у9д3ъ]

Задолбался проматывать! Ещё надо было снять обеденный перерыв и походы в туалет!

[@MarcinRamzes]

What kind a stand for your drill you have?

[@devanirparra164]

Estou tendo uma ideia, não sei se original, mas no uso de macacos hidráulicos de 2 toneladas que tem um custo de 60 reais, dispensando metade dos grampos sargentos etc do caminho, na morsa de mesa como no uso geral. Práticos área de abrangência de força superior e com o uso são práticos de manejar 4 macacos um par exercendo força no objeto a colar ou furar contra o outro seria 4 toneladas de força, precisa de mais que isso?

[@jimisullivan1240]

where did you get your drill press ?

[@daveyJ213]

Ich genoss Ihre aussage Video. Können Sie someinformation über die Bohrmaschine zu geben. Es scheint sehr acurate , tragbar und einen geliebten Menschen , dass sie verwendet werden, eine tatsächliche Bohrer. Wer zu machen , dass die Bohrmaschine ?

[@daveyJ213]

+Prasannah Parivnate I would not know, but thanks for the information.

[@fwanknmt]

amazing vidz, please drop the 80's jazz

[@HolyCrapAA]

What brand is your drill and stand? Looks good and simple. Been lookin for a drill, is that good?

[@gaborsiklos512]

I believe it's a Wabeco drill stand.

[@gaborsiklos512]

www.wabeco-remscheid.de/drill-stands-and-accessories/drilling-stands-milling-stands.html

[@thoperSought]

Gabor Siklos awesome, thank you!

[@arnulfoacevedosoto7956]

Amigo cuanto cobra por los planos en PDF.

[@naufragonaufragado87]

Pesadísimo el video!

[@mauropagano4407]

Bravo

[@andYz00m]

THERES A HOLE IN YOUR BUCKET DEAR HENRY

[@kennywickham]

Thank you for the info guzzi73

[@woodbeard9861]

schenkt dem Guido mal einer ne CD mit hörbarer, gema-freier Musik?

[@attiladanci9830]

thank you ...