Rough Country's 2" Front 4" Rear GM 07 and Up 2WD Spindle Lowering Kit

[@hondaservicecenter]

This works on 2005 crew cab correct? Because the instructiom sheet shows the only difference in kits is the spindles

[@owa2533]

Will this kit work on my 2007 silverado Classic crew cab 2wd?

[@subielife0743]

Would you recommend this for racing straight line?

[@pablorangel6792]

I have a 5/6 rear drop but I'm using your 4 inch rear shocks . Does your 4inch rear shocks push the truck back to 4 . Or can l still use them on my 6 inch rear drop????

[@RoughCountryTV]

So you have the 4" lift shocks installed?

[@pablorangel6792]

@@RoughCountryTV im using rough country's 4 inch rear drop shocks . But l am a bit more lower than the 4 inch . That that afecct my 6 rear drop . Do l have to get a det of 6 inch drop shocks or can l stick with the 4 inch l have

[@jpgarage952]

Does this worl with 4wd models?

[@jaimecastro4738]

Is there any driveline spacers?? Ive seen other kits run them ?

[@ryanpennington929]

do a video on a 4in spindle lift on a 2wd chevy

[@HIDALOKO69]

hi!! i have a cuestion i have a lowered sierra 2009 i boughted like this, looks nice but the back is really hard when i run over bridges and pot holes like has no leaf springs the diferential is on top of leaf springs what can i do to fix this problem? thank you!!

[@josemartinez9329]

HIDALOKO69 u need a c notch if the Axle is hitting the frame

[@ZRZ71]

Will this kit work on a 4x4 ?

[@lildaddy1]

I know it says O7 an up. Do you guys have a kit like this one for a 98 Chevy Cheyenne swb ? I have 4 drop shackles and hanger but want to bring down another inch with blocks?

[@RoughCountryTV]

www.roughcountry.com/lowering-kits.html?vehicle_drive=4&vehicle_make=7&vehicle_model=239&vehicle_year=77 This is what we offer for the 98

[@pablorangel6792]

By installing this kit . Would I still be able to tow my dump trailer ??

[@RoughCountryTV]

I wouldn't recommend towing with this kit installed since you are doing the axle flip on this application it would not be ideal for towing with the drop kit.

[@pablorangel6792]

Whats my capacity for caryng anything on my bed then . ?

[@ricardoveloz7335]

If i install this kit do o have to cut the chassis?? Or can still install it with out cutting the chassis??

[@RoughCountryTV]

This is a bolt on application.

[@JustAGuy781]

You do have to cut a couple of pieces off the rear.

[@isaiahsaavedra9496]

Like what ? Like the idea of the level drop but don’t want to cut into the frame any idea what needs cutting ?

[@sirtnfol8476]

I was totally confused on which way the shackle mounts went.

[@hondaservicecenter]

They go like in the video then?

[@sirtnfol8476]

@@hondaservicecenter yes. Use top hole of the 3 or itll be higher than the front

[@hondaservicecenter]

@@sirtnfol8476 Like this? ○ ○

[@SavageMedic]

Can you go lower in the back if you wanted?

[@RoughCountryTV]

Medic with an AK You would not have the ability to go any lower in the back with our kit, you may with others but you are most likely looking at some major modifications to do so.

[@Lwrthnu64818]

Not true 😑 I put a lowering block to get 2-5

[@freddyhernandez369]

by any chance does installing this kit void warranty ?

[@RoughCountryTV]

Installation of this kit does not void the warranty of the vehicle.

[@troy_2395]

Anyone know where I can get a drop kit for 2500hd

[@RoughCountryTV]

Top Gun Customz might be a good place to look.

[@ambrim8328]

that's not low it looks stock. 5/8 drop is what I have on my 1994 c1500 ex cab on 255/30/22 belltech every thing. Rides like a sports car and take's off like a mucel car yes has 350 with all the Goody's for the engine so if you go belltech u won't be sorry

[@RichardTheGreat210]

You need to get your eyeballs fixed cause that clearly looks different from stock lol. Not everyone wants a scraper

[@manuelfarias1o1]

No difference