Router lift test INCRA Mast-R-lift II VS Triton router

This video is about the Router lift test between the INCRA Mast-R-lift II and a Triton router with an INCRA mounting plate.
This video focuses on the router lift aspect and not on the router aspect.
If we talk about the router aspect, I think the Triton is a very nice router for its money. I prefer the AEG over the Triton, but it is hard to visualize why.
I like the sound better, and it looks and feels better. Working with both of them give the same results.
Visit www.hookedonwood.online for free plans and other nice content for the woodworker.
The free plans for the closed box under your router table will be available in a few days.
Here you find the links where I bought the equipment shown in this video. I did not get paid for this video, nor do I have a special relationship with these company's, other than that I am a customer of them.
Triton Router lift.
www.screwfix.eu
INCRA mounting plate for Triton router www.gereedschappro.nl/artikel...
INCRA Mast-R-lift II www.gereedschappro.nl/artikel...
AEG router www.amazon.de/AEG-MF-1400-KE-...

[@lol224455]

I'm used to larger, corded routers kzbin.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

[@namelesswarrior4760]

Your table saw guide looks so advanced and definitely cost a pretty penny as well! It is always a luxury to work with the best tools and accessories if one can afford it! Thanks for sharing and most informative as per usual.

[@holzhandwerk_ak]

Thanks, Dennis, for this excellent comparison. Love the look of your shop furniture with the black MDF and the precision of your work

[@Zfirearms]

I’m comparing these two lifts, thank you for taking the time to make this video, keep up the good work

[@dwaynesummerfield4282]

Great video comparison of these two products thank you, and can't wait to see your new router table !!

[@t.e.1189]

This is the first video of yours that I've seen. Thank you very much for the comparison, it was very helpful. I probably go with the INCRS Mast-R-lift. Now off to watch your router table videos.

[@fpvtrys2632]

Thank you this is exactly what I'm looking for in these two reviews and woodworking information not a lot of fluff just straight to the point with reliable information thank you

[@mark2talk2u]

This is an excellent video. Very clear comparison and explanation. You have answered a question that I’ve had for awhile. Thank you!!!

[@Oysteims]

Been binge-watching your videos, and have to say that your videos and website are excellent!

[@HookedonWood]

Thanks Man! appreciate your comments!

[@johnmutton799]

I have the Festool OF2200, the dust extraction on that is brilliant. Fully enclosed! And the plunge is perfect, no play on the pillars, and the locking system clamps both pillars and the cutters are dead on 90° to the table top. Perfect

[@VideoPixelStudio]

Hi Dennis, just discovered your channel and really enjoying catching up with your videos and reviews.

[@crobianman8055]

A good comparison - thank you. I have the bigger 2400W Triton router with the incra fence, incra mounting plate and clean sweep inserts. This set up is super accurate and I wouldn't change it for anything else. The ability to change router bits with one spanner quickly with the Triton is also very convenient.

[@HookedonWood]

I never compared the 1400 W and 2400 W version. Did you?

[@ErikRave]

@@HookedonWood is it possible to compare the routers? I want to make a routing table, but I'm not sure which router to purchase. Jof001, mof001 or the tra001.

[@katabrontes]

Hi Dennis I use a big Triton in my table and this comes with an excellent dust extraction shield which removes all the dust from below without any obstruction to the lock or switch. I have " modified" the switch so that I can leave it on and still raise the router to the top activating the spindle lock. This is OK as I have a NVR switch on the front of the table ( but I still always unplug the lead before changing bits). I think the Incra plates would improve dust collection a little but by using a generously sized insert I find it is pretty good. At the moment I am torn between building one of your new design benches and Ron Paulk's latest version which is easier to move if I want to work outside the workshop ( in UK workshop is about 150M from the house).

[@samoanSAIYAN]

Awesome content Dennis mate. Keep up the good reviews!

[@WKYanks]

Love your unbiased, informative videos. Subscribed.

[@mikehogan1827]

Excellent comparison. Thanks for pulling it together. I’ll be checking out your website.

[@christofix]

This was very interesting for me. Thanks for sharing all these tips and knowledge.

[@MCsCreations]

Really, really interesting! Thanks a lot for all the tips, dude! 😃 Stay safe there with your family! 🖖😊

[@zhilaxfow7888]

I have the triton. Very happy with it also. I really enjoy watching your content.

[@weebshit2391]

Hello, how is your triton after 3 years?

[@Tensquaremetreworkshop]

Good review! The Triton comes with a moulded dust collector around the bit. (I see you did not fit this). I use this in conjunction with a fence extractor. Works well. Because you need access to the switch (because of the spindle lock power interlock) as well as the lift lock, a box gets in the way. I fitted a DRO to the lift, so I get a readout of the height at the touch of a button. Fit a guide for the winding handle and it drops in easily.

[@anthonybowyer1874]

Great channel, great videos, great reviews. Only found you today, more tool reviews would be great, also some wood working projects would be nice also. Keep up the good work, I look forward to watching future videos. Kind regards from the UK.

[@abelgerli]

Thank you so much I actually was think of building a router table only with the Jessem system now I probably will go to the incra lift the dust extraction just convinced me. By the way I am looking forward to your workbench build just because being able to remove the incra positioner and re attach it in a consistent way is perfect for my garage where I have to use the a workbench for multiple tasks.

[@aisotton]

Thank you for this useful review from someone who has actually used the tools!

[@danielpatterson864]

Thanks mate! I already own the same 1400 triton router so you really helped me make my decision easy!

[@l.k.1011]

Hello Dennis, very good and informative video, thank you. I wanted to add, that there is also a router from Trend (T11) with a similar mechanism - but it´s a different price level than the triton. When I am going to plan my router table, I probably will chose the trend (because when you want to use the machine also as a template router, then the handling from the trend is because of the balance probably better). Thanks and all the best! BTW: I am very impressed with your dust collection system on the router table. Thank you, because that is what I am looking for, when I am building my router table.

[@MatzeMaulwurf]

You are the Man! I love your workshop. Tools are superb.

[@paulrohracher1200]

There are actually a few other brands that sell over-the-table-adjustable routers like Bosch, Trend, ect... love your videos!!!

[@staskotula4301]

But none in the 3.25HP power range.

[@aladdin4d]

@@staskotula4301 Check the amperage rather than the HP rating. It's a much more accurate representation. The Triton TRA 001, listed as 3.25 HP, is rated for 15 amps @ 120 volts. The Bosch MRF23EVS is listed as being 2.3 HP but is also rated for 15 amps @ 120 volts making both routers 1800 watt machines regardless of Triton's inflated claims. The fixed base for the Bosch includes above the table adjustment.

[@dalailager]

Love your videos, keep them coming 👊

[@charleskrueger5523]

There is also available the "INCRA CleanSweep Dust Collection Cabinet", pre-made and measured dust cabinet. I'm pretty sure the Triton M0F-001 will fit in this.

[@reclamedoos]

Great review, thanks. You mentioned you visit some forums on the internet in your video. Maybe it would be nice to share some of your ‘sources’. Always eager to learn more

[@HookedonWood]

Woodworking.nl and woodworkforums.com are two forums I watch frequently.

[@njbaquatics4827]

There is another company called trend which do the same on their T11 model Rueter I’ve used both and I actually think the trend is a better option they also have a massive selection of accessories. You mention making this plate yourself I would love to see a video of you doing that I don’t believe anyone else has done it yet especially if you could incorporate improved extraction like you did with your tablesaw insert I’ve made it and it’s made a huge difference to my dust collection so to have the same on my router table would be fantastic keep up the good work love the channel👍

[@CutitwithaHammer]

I always enjoy your videos. A nice comparison.

[@charleshirst6220]

I have always wanted a router lift and I saw the Triton at the UK's D&M Tool woodworking show. As of today, Triton JOF001 1/2" router £180, INCRA Mast-R-Lift II £470, UKJ Router Elevator £430. Both the Incra & UJF require the additional purchase of a router. It really is a no-brainer in my view and I bought the Triton and modified my existing table plate for free. I find the Triton a superb achine for the price (indeed, at any price!); loads of user-friendly features and safety features.

[@brianheiss5063]

Great review. Do you have to remove the spring in the Triton before mounting in a table? Your review is excellent and to the point. I will continue checking out your channel. Glad I found it! Happy New Year!

[@edgarscheuermann867]

I used an Makita RP2300FCX 230V with the Incra MagnaLOCK Plate MLPUNDRILLED-AL. This combination is also adjustable from above (like the Triton).

[@Chris-vp9ht]

hey i absolutely love what you do your approach to filming vids is awesome could i ask were you bought your woodshop from thanks

[@TheTranq]

Good detailed look thanks. My friend just gave me this router and gonna be getting it set up in a table

[@tbc210]

Very well done video, thank you for making it. I have been considering purchasing the Triton 3hp router with a plate like the Incra, since it seems to offer the best value. But I have so far been scared away by the many reviews I have read, reporting that the mechanism that winds the router up and down is constructed of cheap plastic components that routinely break, rendering the router lift useless. I wonder, in your experience with the Triton router so far have you had any trouble with that mechanism? Does it seem cheaply constructed? Thanks for your videos!

[@Mike--K]

This is a timely and great review. I live in Germany, and last week I replaced my Triton TRA001 in the Incra router plate with the Incra Mast-R-Lift II and the AUKTools router. I was thinking about the AEG router, but then I found the AUKTools router and the option I bought has the external power and speed control. My router table has the CleanSweep housing under the table, and it was getting tiresome to constantly open the router stand cabinet and open the CleanSweep access door every time I wanted to lock or unlock the router height. The Mast-R-Lift II is a joy to operate and the AUKTools router meets all of my requirements. The CleanSweep inserts and enclosure are fantastic for controlling chips and dust. Now I need to find someone in Europe that wants a Triton router and Incra mounting plate. :-)

[@HookedonWood]

I found someone on a Dutch forum who wanted mine. I will put a link to you comment. Maybe he wants it.

[@Mike--K]

@@HookedonWood Thank you, Dennis!

[@martinmeijer5225]

@@Mike--K Hi Mike i'm interested. Perhaps you could give me your contact details, maybe we can work this out! And thanks Dennis!

[@Mike--K]

@@martinmeijer5225 Hi Martin, I don't want to post my email address here, but if Dennis would be so kind, he can send it to you.

[@thomasalison6188]

Thanks Dennis,a very good review!

[@DKWalser]

That was a great review and comparison. Thank you.

[@DanijelHribar]

Just the video I was looking for. Great one. :-)

[@sumosprojects]

I’ve the Triton set up in my Kreg Router Table & love it 🍻👍

[@RonKillian]

I use to have that exact set up, the older Triton router with the Incra standard plate. For the record, you do not have to drill the hole for the height adjustment rod, the incra plate is made with it. Also, Porter Cable 895 has an above the table height adjustment, with more precise adjustment and the Incra plate for the porter cable has the hole for the height adjustment rod. As for the Triton router, it was a very frustrating router to use. As you said, no precise height adjustment. Also, often when I was trying to fine tune a bit height, as soon as I unlocked the router it would drop, so I'd have to start all over again. Also, the pin that locks into the shaft for bit changes, so often it would not lock in. It was not jammed from dust, moved freely, just could not lock in all the time. Since that is the only way to change bits on that router, it was very annoying. I was also not a fan of the power switch being the lock out, more reaching under the table. I get the safety factor, but it was annoying. I have a safety paddle that is very accessable. While the triton had plenty of power, did everything I wanted, it was beyond frustrating to use. I ended up getting the Jessem Mast-r lift for incra and it's a joy to use. It's a work of art and so precise. With a porter cable 3-1/4 hp motor it's just amazing. Gave the Triton to my son, I do not miss it one bit.

[@EditioCastigata]

2:42 Bosch GOF 1600 has that feature, too: You operate the lift using a hex-key. Since dust will eventually accumulate in it, you might want customize it.

[@superchile9640]

I always clamp my Triton. I assumed at purchase that I wouldn't have to but found it necessary. I have not seen a sliding door but I like it. It would make accessing the on/off switch for bit changing.

[@kauerpc]

Great video! Thanks, Dennis!

[@johannesbarlage8335]

Really good video and thx for your information of this both configurations. Keep doing

[@rick91443]

Great finding your channel(live in France.) Am always watching woodworkers and programs from N. America and the ENORMOUS CHOICE OF AFFORDABLE AMATEUR WOODWORKER PRODUCTS; good to see more European Channels speaking about products we can easily purchase here...cheers...rr Normandy, France(I subscribed too)

[@HookedonWood]

Thanks Richard, Nice to have you as a subscriber :-)

[@michaelpattersonartphotogr2831]

Hi Dennis, I just found your channel.. I am finally going to build a bit of a woodshop in my garage rather than working on a small ryobi table saw and workbench. I was planning on buying the triton router and now with your video, the incra plate. however, I am in love with your router table and dust collection box. I already have a fairly large workbench so was thinking of building a router table into a mitre saw station. Do you have plans or would you sell plans for your table router, and dust collection etc.? I notice you said they would be available.. maybe they are bundled with something else as I couldn't find them on your site.

[@warrensmith2902]

You missed the Porter Cable 890 series. May only be available in the US. It has above table adjustment as well. Been using mine with a Rockler plate for years. Had to drill the hole for the adjustment wheel as well.

[@silverbackag9790]

Slightly old comment but Porter Cable hasn’t offered routers in since 2020.

[@johnsmit9309]

Thanks Dennis. This was very helpfull!

[@jbourgeois5092]

Thank you for the information Dennis! I hope you will include detailed drawings of the dust collection box in the workbench plans

[@jbourgeois5092]

how do you turn the Triton on when it's inside the dust collection box? seems inconvenient?

[@HookedonWood]

Sorry for my slow response. I start it with a remote.

[@jbourgeois5092]

@@HookedonWood thanks for the response! Im thinking of doing the same, but adapting it to a Ron Paulk style bench

[@HookedonWood]

@@jbourgeois5092 That would be a very nice combination. keep in mind that you need some stability if you push something thru your router from the sides. Best of luck!

[@bajsgrodan]

Very useful comparison!

[@woodworkinghabits8061]

Hi Dennis, First of all I hope you and your family are all well. I am Dimitrios, from Greece. I am a hobbyist in my starting point Of working with wood projects. And while I was researching for a router plate and a router for my woodworking bench, I saw one of your amazing videos explaining in detail the incra router plates and AEG 1400 and triton routers. Since I wanted the incra master lift, your description actually solved all my questions about it and went for it in combination with the AEG 1400 router. My question is, whether you start your router manually each time from below the bench or did you use any kind of on/off switch? I bought one switch like that but it is not compatible since my AEG router has a safety switch on it, and if I leave it always on in order to operate the router through the safety switch, it will not start. AEG’s safety precaution makes the router “think” that electric power must gone down and in order to avoid any accident when power is still on, you have to turn it off and on again to operate. Sorry for all these details I just needed your opinion if possible since you have this exact combination and are probably more experienced with it than me. Thank you very much in advance.

[@michaelshick4612]

Great setup would love to have. Thanks

[@charleselkins4546]

Thanks. Exactly what I wanted to know.

[@Paulxj-]

Great video! I have never seen that height micrometer before. What is it?

[@mururoa7024]

I chose Triton (with the Incra plate) for its sheer power and it's ability to use every possible bit size (metric and imperial) on the planet, no limits. Palm routers just don't have power needed for anything else but trimming corners or for working with hard woods.

[@TravisBy]

thanks I found this really useful,

[@kosielemmer]

Great review. Pretty unique in fact

[@matttodd6878]

Superb comparison!

[@denty32]

Top review Dennis

[@s9plus20]

Nice comparison! thanks.

[@UncleJoe1231]

I have a Jessem Master lift & I love it!!

[@bikefarmtaiwan1800]

Awesome shop! Nice video :)

[@deann2609]

Excellent review !

[@whitlockwoodendesigns1858]

Thank you for the great review Dennis, great job. What do you use to clean the router posts?

[@HookedonWood]

Just a towel and some cleaning spray and dry lubricant.

[@chrisaldrich4284]

Seems like a practical choice.

[@njbaquatics4827]

FYI trend is a brand which also make a virtually identical writer to the Triton with the same function this is definitely available in the UK not sure about the rest of the world just in case anyone is looking for an alternative it’s a little cheaper as well if you buy direct from trend. Especially right now as they have a few specials on

[@HookedonWood]

Thanks for the info!

[@pvg5559]

Hi Dennis, fellow Dutchie here....nice review as usual...keep up the great work! I just started using the Triton router in combination with a Kreg mounting plate (similar principles as the Incra however bit less fancy). I was just wondering if you had removed the spring from the Triton before mounting it to the plate (this is also recommended in the Triton manual)? The reason I ask, I have not yet experienced any down shifting of the router without locking it in place while using it. But then again, I have perhaps not been using it long enough to see if this had any significant effect.

[@HookedonWood]

Yes, I did remove the spring. I experienced the downshifting from the beginning. It slightly dropped. The was not that noticeable, but I had some unexplained differences with dado's. I believe it is also recommended to use this lock. I have to say that the drop I showed in the video was big. It normally does not drop that much. But that said, maybe it is just my Triton that does it.

[@garrydye2394]

I have the Incra set up with the Triton router but once the small piece of plastic breaks on the router that engages the locking mechanism so you can loosen and tighten collet...the entire router is useless. Tried to find a replacement part and impossible. Literally a .50 cent piece renders the entire setup useless. Just something to think about if going the cheaper route. Very frustrating.

[@murphyrp01]

Have been watching these without the sound. My Dutch exposure is less than adequate. Good work.

[@eyuptony]

Really impressive just found you, love the way you execute your content. I agree with you about clamping the adjuster when the height is set. I'll need one soon. You've got me thinking. Make one or buy one. Tony

[@FD-dh2fu]

Excellent. Thank you

[@tyyoung4104]

Hi Dennis, very thorough; thankyou. Do you have plans for your table top?

[@HookedonWood]

You mean the finishing? I will finish it with Danish oil in a few weeks

[@samrix5793]

Great video!

[@johnmutton799]

Trend have a 1/2" router with a router raizer built-in the router. Same router as the dewalt 625. But better height adjustment.

[@jimbruce4348]

Great video Denis as usual. I as I'm looking to implement a router into my workbench this is of interest. However, where have you managed to find the Triton MOF001 for €200? I'm based in Belgium and even looking on the NL sites they are mostly for sale at €300. I can however find the JOF001 but not sure if that one can use the table plate

[@HookedonWood]

Hi JIm, I bought I here; www.screwfix.com/p/triton-mof001-1400w-electric-dual-mode-precision-plunge-router-240v/6768k But I read during Covid, they do not ship to outside England. Perhaps this will change shortly. You can not use the JOF001 from the underside of the table.

[@jimbruce4348]

@@HookedonWood Thanks Dennis. I've requested their orders department to estimate accepting orders from the EU again... However, this might be my new source of tools ;-) ... Thanks

[@sergeantarmy]

Thanks!

[@hassleoffa]

I just discovered Hooked on Wood. Love the channel. Quick question ... what is that dark grey wood you're using for your work table tops

[@billvoltzke2698]

I noticed there wasn't a reply yet. He mentioned in one of his earlier videos that he uses fully-dyed black mdf.

[@hassleoffa]

@@billvoltzke2698 Thanks, I did some digging and I can't find anyone locally that sells it.

[@MrPatdeeee]

Good show kind Sir!

[@mohammadalamawi6332]

What brand and model is your sliding table saw?

[@mohammadalamawi6332]

Do you know from where I can get triton router tra002 with 220volt / 50hz ??? I badly need .

[@dave_ecclectic]

The Triton has two spring loaded carriage bolts for mounting its accessory plate. They can also be used to mount the router to a router table. This allows you to release the router for hand held use very simply and quickly without using tools and without the hassle of unscrewing/screwing four screws. For some reason NO ONE does this when they show the Triton even though the company does it themselves and recommends it. Also the Triton has a dust collecting shield with hose nozzle so you don't need a box. I built a box and lined it with towels to cut the noise down.

[@HookedonWood]

Thanks, I did no know. About the dust collection shield, I tried this, but a box is more effective.

[@evanbarnes9984]

Exactly! I love my triton router, that's exactly how I mount it in my router table. Such a versatile router! It's also wonderfully powerful

[@EditioCastigata]

For whoever else wants to do sth. similar: Use „schwer entflammbare Schallschutzmatten“ (“flame-retardant sonic mats”) instead of towels. Sold as foam plates. Or just „Trittschalldämmung“, which is cheaper.

[@designer-garb572]

Excellent video, I personally would expect a high end smooth accurate motor-driven lift with a digital display for the price of the MAST-R lift system, but maybe I expect too much

[@retiree1033]

Programmable digital display controlled by Alexa. ;)

[@havelockvetinari9395]

I have the Triton TRA001 and I bought a Kreg mounting plate for it. Like the Incra the Kreg is pre drilled for the router and the hole for the winding handle is also pre drilled. The Kreg plate was about €70 including delivery and import duties to Austria, from the US on Amazon.com. This would have been more than €100 on Amazon.de. The Kreg plate is made of high density plastic rather than aluminium but it is extremely solid, it doesn't sag and I'm in the process of making a router bench for it at the moment. I like the design of your dust box and I will definitely include something similar in my table.

[@HookedonWood]

Hi, Nice router, and although I like the INCRA but I think you will be happy with the Kreg also. Good Luck with your router bench.

[@havelockvetinari9395]

Thanks, the build is going well, though I have some work to do to completely level the Bench top. The heavy wood board I have is ever so slightly bowed so i will have to flatten it out before I start to use it. Keep up the good work I enjoy your videos.

[@ikpatjen3050]

Hey Dennis , leuk dat ik je kanaal heb ontdekt , zeer informatief en begrijpbaar voor de minder gevorderde hobbyisten , doe vooral zo verder . Nu de aeg bovenfrees , enigste type voor Europa die in de lift past/werkt maar o zo verdomd weinig erover op het www net te vinden kwa kwaliteit enz ..... . Heb jij ze nu zelf in gebruik? Hoe is ze tov andere a-merken ? Kan je me/ons hier wat meer over vertellen aub , danks.

[@HookedonWood]

Hoi, Ja, ik heb de AEG nu zelf in gebruik. Ik ben er wel tevreden over. Vooralsnog is hij zwaar genoeg. Hij loopt soepel en maakt een aangenaam geluid. Het is een mooie frees die met veel accessoires wordt geleverd. Het is jammer dat je die vrijwel niet gebruik als je hem inbouw. Al met al vind ik hem zeker waar voor zijn geld bieden. Hoe hij het doet t.o.v. andere merken weet ik niet. Ik heb alleen de Makita handheld router. Die is absoluut minder krachtig en de Triton. T.o.v. de Triton is voelt hij zeker aan als een betere frees. Niets ten nadelen van de Triton.

[@yvesvandewalle7973]

Thanks for that review! Does the Incra plate works also for the CMT 7 router ( I understand they are pretty much the same than the triton)?

[@HookedonWood]

Sorry ,I can't tell.

[@aRndBelgianGuy]

Hi Yves, could you figure it out ? I have a CMT7E and I'm pretty sure they are both made in the same factory :p

[@EquilibriaHealth]

Great Video.

[@pieterfort]

Any reason you have 2 router combinations in your shop? Do you switch between the AEG and the Triton? If so, for what kind of job?

[@HookedonWood]

Hi Pieter, I sold my workbench including router. But the buyer will pick it up this week, so I had two combinations on this moment. That is why I wanted to do this review. After this week I am left with only the AEG combi.

[@nigelb4318]

Thank you Dennis for your wonderful inspiration. Been today to buy a panel of 18mm mdf & 18mm plywood to make your fantastic bench. I'm looking to purchase a router and the Triton TR01 seem better value for money,, 2400w, 12mm/1/2" collet and the price difference is about 50€..Do you have any advice/suggestions please?

[@HookedonWood]

I thing the 1400 watt is strong enough, but if you only use it in your table, I think you can not go wrong with the TR01

[@nigelb4318]

@@HookedonWood Hi Denis, my TR01 eventually arrived yesterday, so I can start to make my bench now. Looking forward to your next video, meantime have a good easter weekend

[@chuckgrumble5440]

i went for the incra mast r lift ii as jessem makes it basically and incra added the maglock. I have something coming from incra and will see how it stacks up to the jessem stuff I have, but I have doubts. All the jessem stuff I have is so well built like a tank and quality I have not seen from any other brand.

[@HookedonWood]

Hi Chuck, Jessem is one of kind from building point of view. I do not know what you have coming from INCRA. Most products I have from INCRA I like very much! It is good quality, but looks a bit old fashion compared to Jessem. The LS positioner though is un beatable if you ask me.

[@chuckgrumble5440]

@@HookedonWood I got the miter express sled thing, its ok, not sure $170 worth as quality control was poor and not finished well. I have all the incra t squares. I will get the incra positioner when i get a proper table saw, but for now a laminated mdf router table and jobsite table saw it is as my working space is extremely limited. I have a lot of hand tools to make up for lack of space. I almost got the Hongdui miter gauge after watching your review but went with jessem, i know the miter gauge is half of what I paid for the table saw, but I am looking into the future. The jessem mite r excel II is great, and heavy. There is a slight cup in the fence which a sacrifical fence fixes by pulling out on the middle of the fence when you tighten the bolts, but if you are not using a sacrificial fence with certain items its guarantee blowout so it is a self correcting problem, but you could clamp backerboard to it if you wish not to put a fence on it. I email jessem about this to see if this was a implemented design or not. I do not need 1 degree accuracy so it covers what I need. Thanks for the videos, have been watching a lot of them, i did not know about you but love your work.

[@HookedonWood]

I think the ls positioner from INCRA is the best product they have and for to inexpensive considering how accurate and repetitive it is. I did not like the squares. The router lift is great, but ofcourse that is a Jessem. You will love the LS positioner👍

[@EagleLakeWoodworking]

You left out the only router lift that functionally changes the operations you can perform on the router table. The MLCS PowerLift Pro takes the concept of the plunge router and inverts it for use in the router table. The foot pedal allows you to bring the spinning bit up into the work piece. Making it possible to do mortising, circle cutting, stopped dadoes, incremental passes, etc. Combine all that with .001" precision movements, memory positions, and other computer controlled features and its easy to see why it's unmatched by any mechanical lift. So would you please consider the MLCS Powerlift Pro. It's a game changer

[@HookedonWood]

Wow, that is a nice looking product. I do not think they sell in europe.

[@labrat7357]

Chalk and cheese. I had a triton TRA001 in a kreg table fitted into a kreg plate and then upgraded to an Incra master lift II and as a bonus it was a metric version.

[@chuckgrumble5440]

the master lift II is crazy, i haven't used any other lifts but built my own table and used the buy once cry once theory for the lift

[@tbc210]

Very well done video, thank you for making it. I have been considering purchasing the Triton 3hp router with a plate like the Incra, since it seems to offer the best value. But I have so far been scared away by the many reviews I have read, reporting that the mechanism that winds the router up and down is constructed of cheap plastic components that routinely break, rendering the router lift useless. I wonder, in your experience with the Triton router so far have you had any trouble with that mechanism? Does it seem cheaply constructed? Thanks for your videos!

[@HookedonWood]

Hi, I do not have the Triton anymore but I had it for 2 years. (I sold my workbench including router) But I never experienced difficulties with the mechanism. I can not, or did not look inside. A viewer told me ones that this is a inferior mechanism. But again, I can not confirm this. I had the 1400 watt version, so this is a smaller one than the 3hp version. But I can tell you, as I mentioned in the video, that my Incra lift also, sometimes need to be cleaned te lift smooth again. My experience with the Triton 1400 mechanism the 2 years I worked with it is good. I also read some reviews you refer to but I did not have these experience with it. to be sure, buy it with a thrustful company.

[@tbc210]

Great, thank you so much for your reply!

[@HepauDK]

Rockler makes a cheaper alternative to the Incra mounting plate for the Triton routers. I think it is made of some kind of composite material though, I'm not sure, and it only comes with a single insert. Not sure how to get more, as there is only a single vendor here in Denmark. The advantage of the Rockler mounting plate is that it already has the hole for the raising handle pre-drilled in the right location. I read somewhere that you can make the lifting of the Triton routers smooth and easy by removing the spring from the mechanism, haven't got around to testing it on my MOF001 yet though.

[@HookedonWood]

Yes, you have to remove the spring when use it under the table.

[@HepauDK]

@@HookedonWood No wonder the handle was so difficult to turn. Thanks for the response. :)

[@rickolson9011]

Missed seeing your numeric rating system.

[@HookedonWood]

Hi Rick, Yes, I only do that with the China Tools, but perhaps I will do this also with my other reviews. Great tip!

[@djamildr.djouchadar839]

Hi Dennis, Thanks for the great review. It comes at just the right time for me. I am still undecided whether I should take the Incra lift with the AEG router. Or better the lift from Jessem with the Dewalt 625e router. The AEG has 1400 W, the Dewalt 2000 W. Can you give me an advice? Or better help me with the decision? Thanks & greeting Djamil

[@HookedonWood]

Hello Djamil, the good thing is, you can not go wrong with both combinations. I am satisfied with the AEG. But i think de Dewalt is also a very nice router. I choose for the INCRA because of the magnalock system and better dust extraction. I do not know how much more powerful the Dewalt what this mean when using it. Can you do things you can not do with a 1400 watt version because i think you should make multiple passes when milling.

[@djamildr.djouchadar839]

Thanks Dennis, you cleared up my last doubts. I think due to the better dust extraction, I will get the Incra system. After your great video I got the feeling that you are very satisfied with your solution. 👍👍😎

[@HookedonWood]

I like it a lot. I have no reason to think you will experience otherwise. Best regards, Dennis

[@djamildr.djouchadar839]

hi Dennis, hi KZbinr, in addition to the solution with the AEG router MF 1400 ke, I found another maybe interesting option: m.kzbin.info/www/bejne/iHSYlXSvi76oi6c

[@saturnfrak]

Not only Triton has that feature... the AEG in the video has that feature as well... What's nice about the Triton is that it locks when you lift it to the to so you can exchange the bit without removing the whole thing from the table or trying locking it while it's still installed in the table

[@HookedonWood]

Yes, you are right. Thanks for the information.

[@darrellreed7044]

I didn’t have to drill my Incra table insert plate for the lift handle