RouterTable in Home Depot Ridgid R4512 Tablesaw Ep.2017-07

This video is about making or adapting a router table into the Ridgid R4512 Tablesaw from Home Depot.
Index:
00:00 Intro
02:47 Determining spacing for mounts
03:42 Making table supports
05:42 Laminating boards for router table top
07:58 Installing router table supports
08:53 Preparing the router table
13:09 Putting laminate on top
15:06 Routing inset for router plate
16:39 Installing tracks
23:12 Installing power switch
23:41 Summary
See how I added a Dust Bucket to this at • Dust Collection Box fo...
As an addendum here is a link that shows a picture of how I attached the router top to the supports I made for it. That keeps it from moving. See glcrafts.com/images/ImgHowRtrT...
If you make this router table for your saw, please share that with us. How you did it, what modifications you made, and pictures!
This is for light to moderate work. For heavier applications and production processes, one should use a stand alone router table system.
I made this table a little longer and did not take out the stamped table plate because I needed the table to extend far enough so I could install the double track and clear the front and rear rails. If you do not need a double track, then you can make it shorter.
Materials:
 ¾” MDF double layer laminated
 Rockler Router Plate Template Item#20956
 Rockler Router template bit Item#33536
 Rockler level lock hardware kit Item#22994
 5/16 x 1-1/2” bolts (4)
 5/16 flat washers (4)
 5/16 lock nuts (4)
 ¾ & ½ Poplar
 Benchdog dual track Rockler Item#23880
 About 3’ of T-track
 (4) T-track bolts & knobs for fence and power switch.
Links to Amazon products that I use and recommend.
www.amazon.com/shop/garylundg...
Clicking on this will take you to my Amazon Storefront where you can review, and purchase products featured in my KZbin videos and that I recommend. Amazon pays me a small commission for items that are sold. This does not increase the price to you. Sometimes it may be less.
These commissions help support this KZbin channel so I can continue to bring videos to you. I am in the process of building this, so check back often for new items.
-----------
The paddle power switch for the router is at amzn.to/2OaKC5a
The glue for laminating the two pieces of 3/4" MDF that gives a longer set time is Elmer's Carpenter's Glue WoodGlue Max. Also water proof and stainable. Item# E7310. I got it at Lowe's. They still have it. 16 fl oz. $6.78 I used almost 2 bottles.
Links:
Plans: glcrafts.com/Resources/RouterT...
www.GLCrafts.com
Follow me on Facebook www.Facebook.com/GaryLundgrenCrafts
Find me on Etsy www.GaryLundgrenCrafts.Etsy.com
= = = = MY AMAZON STORE
www.amazon.com/shop/garylundg...
= = = = DISCLAIMER:
Exercise good shop safety to protect yourself.
I may have safeguards removed in my videos, but that is solely for clarity to demonstrate a process.
Keep your safeguards in place to protect yourself from injury.
• Safety Glasses
• Hearing Protection
• Lung Protection
• Push Sticks and other Guides
All or Portions COPYRIGHTED © 2017 by Gary W Lundgren, dba Gary Lundgren Crafts. All rights reserved.

[@tonybp965]

Genuis work sir. I just bought this table saw...soon to be unboxed and you with other videos are a tremendous help to this retired 57 yrs young newbie woodworker. I want to sincerely thank you for teaching/showing your fine work.

[@GaryLundgrenCrafts]

Thank you! There are several great videos here on KZbin about unboxing, assembling, and setting up the saw. You'll like this saw.

[@RemmyC4]

Just got word my 4512 is ready for pick up. I have been stalking KZbin for every how to video involving it. Best I have seen so far. Thanks for taking the time to make it.

[@GaryLundgrenCrafts]

Thank you! It is a great saw and you'll love it. All the T-tracks make it jig friendly. Take the time to set it up and check alignments. I was quite lucky in that everything was perfect right out of the box. Some have had to tweak it a little. If you run into any problems, there's help here, and Home Depot's support. Have fun! Thank you!

[@StMoritzGuitars]

I have an older Craftsman 10" Contractor Table saw and have been contemplating on adding a combo extension / router table. After watching you do yours I have confidence that i can pull it off. Thanks for a great presentation and some great ideas !

[@GaryLundgrenCrafts]

Thank you! Glad you got the inspiration to make your own.

[@rickvanhooren548]

I was stuck on how to attach a router table to my Rigid saw. You solved the problem for me. GREAT JOB!

[@GaryLundgrenCrafts]

Thank you!

[@paulprice]

i just got a R4512 table saw and ive been looking for different ways to attach a router table to the open wing. i love what you've come up with. excellent job Gary!

[@GaryLundgrenCrafts]

Thank you! Glad you enjoyed and got the inspiration to make your own.

[@stevegronsky8904]

Excellent job Gary. I have the R4512 also, but I've swapped out fence systems to the Incra TS-LS. I then added an Incra router table extension to the left of my saw with a router lift and Incra's Clean Sweep. I haven't done it yet, but I understand I can shift the position of my fence towards the left of the saw and I can then use it as a router fence. Some day I plan to purchase Incra's router fence (to partner with the saw fence) and I'll have the "whole package". Thanks for a detailed and informative video for the R4512 users out here.

[@GaryLundgrenCrafts]

Thank you! I looked at other options with fences and router tables you can buy. Decided to do this and it saved me a lot of $$. I think I spent less than $100. I'm sure what you did gave you better functionality. Thanks!

[@montewoods4766]

Great design and build Gary. I wish all YT'S could edit their vids like you. thanks

[@GaryLundgrenCrafts]

Thank you!

[@awlthatwoodcrafts8911]

This is a perfect example of taking your time and doing it right. I absolutely love your attention to detail. The primer in the track slots to protect the MDF is something I'm sure a lot of people don't even think about. I know I wouldn't have. I just sub'd and I hope to learn a lot from your style. You remind me a lot of my dad. He was in to model railroading and one of the things he told me long ago was don't be in so big of a hurry. When applied to model railroading, he meant that you never want to be finished. In general though, it was his style to take his time and pay attention to detail. He made some great models in his time.

[@GaryLundgrenCrafts]

Thank you! Y'know, model railroading is another interest of mine since I was a little guy. I still have a small N scale train, but not set up anymore. It's in a box. :-( But, yes, attention to detail is important, and not to rush things. Today many people have a 'Fast Food' mentality. We want it fast! Craftsmanship is something that takes some skill, time, and patience. Kudos to your dad!

[@torula]

I don’t comment very often on KZbin….. But I must give you a high five on the video and my favorite part was that laminate dowel spacer trick! Very cool. I won’t forget that ! Thanks

[@GaryLundgrenCrafts]

Thank you! 👍😀

[@buddythompson5284]

I don't know what prompted me to click on this video nor why I watched the entire thing. I don't have this table saw nor do I have any plans to make a router table insert for my table saw or make a new router table. In short, the topic of this video was totally irrelevant to me. Still, it turned out to be highly informative just to watch how Gary approached the problem as well as how to process MDF and the laminate. Just goes to show that it can be well worth your while to watch any good craftsman perform his craft.

[@GaryLundgrenCrafts]

Thank you!

[@AndreiIR000]

I have carefully watched around 70 videos of DIY router tables. This is one of the best, clearly.

[@GaryLundgrenCrafts]

Thank you!

[@gmcfalls]

Genius way to solve that problem. It's great to see how you go about dealing with the challenges and your thought process. Brilliant work.

[@GaryLundgrenCrafts]

Thank you!

[@hardrock1826]

Excellent job. I have a store bought router table attached to the wing of my cabinet saw, much like your set up. It is only one thickness of MDF three quarters of an inch, I am wanting to change that out for a double thickness. You have inspired me to get on to that project, I like your idea of rounding out those corners, it gives it a real nice look. Thanks for the inspiration.

[@GaryLundgrenCrafts]

Thank you!

[@ramaroodle]

Not sure why everybody wants to use a double layer of mdf. One 3/4” is plenty sturdy IMO.

[@hardrock1826]

I made a double thickness MDF router top and I took your lead and rounded out those corners. I put a blue patterned laminate top on, I used a blue Rockler Featherboard track and a Rockler Blue Phenolic router plate. I have a blue aluminum fence I have yet to install but it looks great so far. You inspired me and I got to it right after I saw your video. I'm so happy with the way it turned out, thanks so much for sharing your project, it got me fired up to do my own. I also have a new switch I bought, the router gets plugged into and the switch gets plugged into the wall and controls the router. Thanks for the inspiration.

[@hardrock1826]

AndyB My new router plate is a Rockler Phenolic, it's 3/8 of an inch thick and if you take it slightly deeper like some like to do for adjustment purposes and use adjustment screws under the plate. It leaves you with 3/8 of an inch or a tad less, from what was originally a 3/4 inch thick MDF board. Having a double thickness, you absolutely cannot go wrong and if you are going to mount this between the fence rails on either side of your table saw. Having that thickness to put screws into or whatever method you're going to utilize to secure your router top in place will result in a much more secure installation. It also gives you a little more meat when you install your featherboard track and the track for your fence. With my new router table top, I now have four router tables all double thickness and on wheels. And like my new one, I won't have any issues crop up regarding the thickness and solidity of my routers.

[@GaryLundgrenCrafts]

Thank you!

[@feelthebowes]

I just finished adding the same upgrade to my Ridgid table saw… Except that I cut my existing Freud router tabletop and reused it instead of making a whole other router tabletop. It does fall a little short of the end of the table saw’s rails of course… but a will next extend the repurposed Freud router tabletop by installing a 6-inch deep cabinet with tip-out shelves for router bit storage and router accessories. The main advantage of doing it this way is the savings in time and material but also that I get to continue to use the original miter gauge track AND all of the original properly positioned threaded inserts are available if I wish to the use the original dust-extracting fence!

[@GaryLundgrenCrafts]

Thank you! Glad that helped.

[@olipoulsen2861]

Thanks for your reply. I know for what you pay for, I am old craftsman, pipe and plumber. But after a long illness, I have started to do little things quietly, it means a lot to have something to do. Thanks for your vidio on youtube, they are very good and easy to follow, and very professional. I have received many great tips from you, thank you very much.

[@GaryLundgrenCrafts]

Hi Oli! Thanks! for your kind words. Are you of Swedish or Norwegian descent? I am of Swedish descent myself. 2nd generation US born. Y'now, we Norsemen are craftsmen, and great ship builders. 👍

[@benfrancemusic]

That was a great build, Gary! I found your channel searching for router tables for the Ridgid R4512, as I'm about to pick one up, and I already have a Bosch router, but no table. Thanks for the great inspiration!

[@GaryLundgrenCrafts]

Awesome, thank you! See how I added a Dust Bucket to this at kzbin.info/www/bejne/nIfFpYN8nLamrpo

[@tvanloon3995]

Nice job, Gary! I have this same saw, and can't wait to make one of my own! Thanks !!

[@GaryLundgrenCrafts]

Thank you!

[@erikjohnson2889]

Gary, this is fantastic. Thanks for sharing your knowledge and great ideas. I'm very inspired and I learned a ton!

[@GaryLundgrenCrafts]

Thank you!

[@johncole9964]

Nice, well thought out video. Your style of presentation is very relaxed and yet keeps the3 viewer engaged. Great little tips that most people wouldn't think of. Thanks

[@GaryLundgrenCrafts]

Thank you!

[@tomx63]

Impressive Gary! Thanks for sharing. I'm now inspired to do the same on my Delta contractor saw.

[@GaryLundgrenCrafts]

Thank you!

[@keiththrelkeld5890]

Your router extension is by far the nicest one I have seen. Makes me want to add it to my tablesaw.

[@GaryLundgrenCrafts]

Thank you!

[@joedance14]

Beautiful! Appreciate the attention to detail and clear, simple explanations.

[@GaryLundgrenCrafts]

Thank you!

[@robertlefeuvre9404]

I've been looking for table saw video that shows how to make a router extension. Your example is the best I've seen yet and will work well with the Rockler Pro Plate I just bought. Thank for all the tips like priming and then using oil based paint to seal the MDF. Attention to details are what I look for when building anything. Excellent instructions and well thought project. Bob

[@GaryLundgrenCrafts]

Thank you!

[@jayt838]

Thats a mighty fine job on that router lift extention table , I like the removable power stop switch for your work table . Great idea thanks

[@spencerrobinson5385]

Two thumbs up Gary - great video an great plan!

[@GaryLundgrenCrafts]

Thank you!

[@jetme8815]

Great build Gary! You are a solid craftsman. Well done and well presented. Keep it going!

[@GaryLundgrenCrafts]

Thanks!

[@steveszabo7305]

Very nicely done video. Gave me some ideas for my table saw/ router table space sawing setup.

[@GaryLundgrenCrafts]

Thank you!

[@chuckbrewer6539]

Like the laminated top gives it clean classy look 👍

[@GaryLundgrenCrafts]

Thank you!

[@duanemckitterick3450]

I agree with Steve. Great video. I have the same saw and you have provided many good ideas for which I will getting to work on soon. Thank you.

[@GaryLundgrenCrafts]

Thank you!

[@blueblur6447]

Very good build, I am inspired to do the same build. You laid it out very clear and concise. Thank you for your service and video.

[@GaryLundgrenCrafts]

Thank you!

[@billlackey8363]

Nicely done. I like the uncommon laminate color as well. Got some good ideas from you. Thank you.

[@GaryLundgrenCrafts]

Thank you! Glad you got something from it. The laminate I got was a return so I got it for 1/2 price at Lowes, and my military discount. In the shop I'm not as fussy, it was not ugly, so it was good enough for me. 👍😀

[@paullav8627]

Thank you, I've had a Kreg router table but didn't know how to mount it on the wing of my table saw. I absolutely love how you used the T-track! That is exactly how I'm going to do it. This has been on my mind for some time and you solved my problem. I appreciate it.

[@GaryLundgrenCrafts]

Thank you! I'm glad that helped and gave you some inspiration. 👍 😀

[@bradleycothren9580]

hi Gary ....i watch alot of videos on here and i must say that was or is the best explained easy to follow and not be confused video i have seen to date....thanks and you should keep do all your videos like this one .....MUCH APPRECIATED.....

[@GaryLundgrenCrafts]

Thank you! I try to keep it simple. Sometimes details get in the way. I keep trying to improve. Thanks for your feedback!

[@derekpeterson8005]

Great build! Thanks for sharing!

[@GaryLundgrenCrafts]

Thank you!

[@kerrygwebster]

Love it. Great craftsmanship.

[@GaryLundgrenCrafts]

Thank you!

[@Jenuin]

WoW. This was way better and in greater detail than what I was expecting. Well done sir.

[@GaryLundgrenCrafts]

Thank you!

[@ecaff9515]

Excellent video and process. Your an inspiration. Thank you for sharing.

[@GaryLundgrenCrafts]

Thank you!

[@WegmansLover]

Excellent video and craftsmanship. You could sell that as a kit.

[@GaryLundgrenCrafts]

Thank you! I did have an inquiry to make one. After figuring costs and shipping, it is cheaper to buy one of those cast iron tables from www.mlcswoodworking.com. With mass production they can do it cheaper. What I did is for the DIY'r to save $$. Thanks for the encouragement!

[@Win52D]

Excellent job. I like your approach of supporting the table from the underside.. I will be looking to make one of these in the near future.

[@GaryLundgrenCrafts]

Thank you!

[@LiloUkulele]

well organized, clear, concise...nice job!

[@GaryLundgrenCrafts]

Thank you!

[@donbomer5630]

Most excellent video Gary! Thanks for sharing your knowledge and experience.

[@GaryLundgrenCrafts]

Thank you! Glad you enjoyed it.

[@philliphinkle2812]

Very nice. This is the best setup I've seen for a saw extension router table. I have a similar fence on my saw and with some minor adjustments to your plan, I am going to build one for my table saw. Thanks

[@GaryLundgrenCrafts]

Thank you!

[@50plymouths]

Very nice. I have a Menard's Master Force professional Contractor saw which is almost identical to the Ridgid Hybrid Cabinet Saw that you have. This is an awesome idea and I will have to try it on my saw.👍

[@GaryLundgrenCrafts]

Thank you!

[@RoadglideDad]

Fantastic! I will be coming back to this to try to do the same thing. I see you like to use T tracks a lot. And I can see why. Thank you very much for sharing! 👏👏👏👏👏

[@GarysOutdoors]

Thank you!

[@neipas02]

Amazing. That is definitely an engineering mind at work. You thought of everything sir. Very informative. Thanks for sharing your tallents. Keep up the good work Gary!

[@GaryLundgrenCrafts]

Thank you!

[@davep6439]

Great job, and great ideas. I plan to adapt some of your ideas to my table.

[@GaryLundgrenCrafts]

Thank you!

[@DadzorRules]

Excellent work, and excellent narration, and the best part... no annoying music! I am going to use some of your mods in my soon-to-be-built router table. I can't use all of your mods because I have the Ridgid R4511 which has a different rail and fence system. Thanks for sharing.

[@GaryLundgrenCrafts]

Thank you!

[@steveszabo7305]

Easy to understand video. Thanks for making it.

[@GaryLundgrenCrafts]

Thank you!

[@kurtgoodwin9490]

some wonderful ideas here - been thinking about putting a panel down on the open wing, and then a cart underneath the wing for tools and mitre gages, etc. this was very helpful

[@GaryLundgrenCrafts]

Thanks for watching! 👍

[@mikeanderson9276]

Great audio, video, and content! Thanks Gary!

[@GaryLundgrenCrafts]

Thank you!

[@mr.p9882]

Very nice. Beautiful work!

[@GaryLundgrenCrafts]

Thank you!

[@leswire5859]

Thanks Gary,Novice here and want to build a router table and add my craftsman router to my Rigid saw. Thanks for the video.

[@GaryLundgrenCrafts]

Thank you!

[@Sawdust45205]

Awesome job fantastic tutorial to follow...well done. Thanks

[@GaryLundgrenCrafts]

Thank you!

[@richardmadsen115]

Really a good video, very instructive and complete in the audio portion too. I am going to build a a router table on one of my wings also. I found this very helpful. Thank you, Richard

[@GaryLundgrenCrafts]

Thank you!

[@1927Scavengers]

Really nice job. Great job explaining and executing.

[@GaryLundgrenCrafts]

Thanks for watching!

[@butchford757]

Very nice job. I’ve been looking at buying a cast iron wing to fit my Craftsman contractor saw. I had an aluminum one but the slots for bolting it to the table cracked and could never keep it level. You sir have convinced me to build my own.

[@GaryLundgrenCrafts]

Thank you!

[@VideoRanger]

Great project and video. Congratulations!

[@GaryLundgrenCrafts]

Thank you very much!

[@kkelley8772]

Gary, excellent. One of the best tutorials I have ever seen on youtube. I am about to purchase a rigid table saw and I would like to duplicate your router table attachment because I am very limited in workshop space. Thanks

[@GaryLundgrenCrafts]

Thank you! So great to hear I am helping others. Is that a Golden I see in your icon? We have one too.

[@lifeaslou]

Nice work Gary!

[@GaryLundgrenCrafts]

Thank you!

[@joejohnson3910]

very nice. i have a Ridgid saw also, and you gave me some great ideas.. thanks again

[@GaryLundgrenCrafts]

Thank you!

[@bobwhite825]

This has got to be the most detailed video on ANY subject I"ve ever watched and I"ve watched a ton on videos on here. Great job Sir. Thanks for sharing your knowledge. Now how much would you charge me to build the same table? LOL

[@GaryLundgrenCrafts]

Thank you! I have been asked to make these before. The problem is that you can buy a cast iron one online (perhaps a bit heavy) for the same or less than what I would charge, plus shipping.You could be looking at a total of $400+ with me. I did the video so woodworkers can build their own and save a lot of money if just buying materials. No labor charges. One can fine tune the leveling on their own. Thanks!!

[@lonniecrook1684]

Very nice job and end result!

[@GaryLundgrenCrafts]

Thank you!

[@Jonnychapps]

Awesome video Gary. Very well done!

[@GaryLundgrenCrafts]

Thank you!

[@neilmunro7924]

Nice job, I enjoyed watching this.

[@GaryLundgrenCrafts]

Thank you!

[@smitty2jones]

Goodness, that's slick and looks great!

[@GaryLundgrenCrafts]

Thank you!

[@HarlyGuy13]

I’ll be getting my new R4512 next week and I’m trying to decide if I want to purchase a router extension or build one. Well after watching thus I thunk if I can muster up the courage I just may. Very nice

[@GaryLundgrenCrafts]

Thank you! Good luck with yours. You can do it. Building it it much cheaper than buying, and you get to make it the way you like it. Also, maybe learn some new skills. Thanks!

[@awlthatwoodcrafts8911]

The manual for the saw has a section on how to make the insert so it's certainly worth a try. I'm going to do it when I get mine in a week or two (tax return, baby!)

[@MrMustang1973]

Nicely done sir. Going to try this myself.

[@GaryLundgrenCrafts]

Thank you!

[@michaelblack4993]

I enjoyed your video and found it to be very useful. Nice engineering work...thanks

[@GaryLundgrenCrafts]

Thank you!

[@emmijoe2]

Excellent video thanks from Mexico

[@GaryLundgrenCrafts]

Thank you! Gracias Amigo!

[@fernandogonzalez4834]

Great job on it. I'm going to try in do it in my table saw, let's see how it comes out..

[@GaryLundgrenCrafts]

Thank you!

[@Theexplorographer]

My god, during the entire video I expected you to start yelling at Donny and telling him he is out of his element! Great job on table Mr. Goodman, er Lundgren.

[@GaryLundgrenCrafts]

Thank you!

[@JS-rp7qb]

Mark it zero!

[@raymondfisher5552]

Great video. Thank you for sharing this step-by-step build without sending viewers to a website to buy your plans. Also, just a suggestion... When I need to fill something like that MDF edge, I use an all-purpose filler. Bondo makes their same auto-body filler for other uses like home repair. Most home improvement stores carry it. When it cures, it's incredibly strong, sandable, and water resistant.

[@GaryLundgrenCrafts]

Thank you! Thanks for the tip on filling in edges on MDF! 👍

[@Robert8455]

Very nice Gary

[@GaryLundgrenCrafts]

Thank you!

[@urusvati7777]

Yes, very nice work and video, thank you! And good experience - how it can be done!!

[@GaryLundgrenCrafts]

Thank you!

[@therworddiy7389]

Awesome idea and really well explained!

[@GaryLundgrenCrafts]

Thank you!

[@huevoneousmaximus2309]

Thanks Gary very informative.

[@GaryLundgrenCrafts]

Thank you!

[@randynewtonsr9659]

Looks great sir, I'm looking into getting a table saw , not sure which one yet maybe the Ridgid R4512 or the JET Proshop! Both have good reviews, but the Ridgid is considerably less expensive! I love your design for the router table in extension wing , it's just simply brilliant!!👍😀

[@GaryLundgrenCrafts]

Thank you! I like the Ridgid table saw. It is stable, solid, and has all the options I'm aware of. What they don't have, we make a jig for that. I like that the Ridgid has all those T-slots on the rails and fences. That makes for a lot of adaptability. I used the T-slots on the back rail for mounting an outfeed table. (see my video on that.) I don't know that other saws have that.

[@SridharJayakumar]

I don't think I can do half as nice job as yours, but I thoroughly enjoyed the build.

[@GaryLundgrenCrafts]

Thank you! I think you can do it just the same.

[@valterleao6795]

Parabéns..., Ficou excelente, seu projeto é MUITO funcional, ajuda otimizar os espaços e traz organização! Obrigado Abraço aqui do Brasil 🇧🇷

[@GaryLundgrenCrafts]

Obrigado!

[@shamilvp]

awsome, thanks for sharing

[@GaryLundgrenCrafts]

Thank You!

[@wayneduncan5656]

Very interesting and complete video on your project that I believe is very good.

[@GaryLundgrenCrafts]

Thank you! Glad you enjoyed it. 👍

[@titusflavius9566]

great job Gary!!

[@GaryLundgrenCrafts]

Thank you!

[@jjs71072]

It looks awesome, thanks for the great video

[@GaryLundgrenCrafts]

Thank you!

[@DaveVT5]

Awesome Gary. Thank you for sharing, I learned a lot!

[@GaryLundgrenCrafts]

Thank you!

[@garrysmythe]

Great build

[@GaryLundgrenCrafts]

Thank you!

[@dennismurphy5710]

Great job Gary...

[@GaryLundgrenCrafts]

Thank you!

[@northwoodshermit6036]

Gary--wonderful presentation; you add a nice bit of humor to boot (whether you knew it or not), and so it was for me, very much enjoyable; I'm sure you and I will get along digitally, just famously! As of my post here, I have spent the past week researching which router and lift to purchase, which table saw to purchase, and as I'm coming from an ancient Craftsman, also what kind of fence system I might want to employ. I'm with you on the choice of router, on the lift, and on the saw. However, I intend to employ the Incra fence which as I understand it, will make it very much easier to include a single-fence system allowing for 1/32" repeatable machining; used both for the table saw as well as router. And then as I found, the Incra fence system does adapt for the use of a single 3/4" extension; and all of it attaches to the Incra rails just as you have done--brilliant! Much thanks; informative. Can't wait to get started!

[@GaryLundgrenCrafts]

Thank you! Someday when I can afford it, I'd love to get an Incra fence. Much more capabilities. Thanks!

[@SattvaWoodworks]

Hey Gary, Nice job. I did a quick version of this on my Ridgid a year back. I'm using what you did as a much better guide for what I did. I was thinking of ditching the metal stamped wing and going straight to the cast iron. I'm not a big fan of the stamped wings although they work fine. Thanks again, Ken

[@GaryLundgrenCrafts]

Thank you! I had thought of eliminating that wing also, but wanted the dual track to extend beyond the rails to be sure I had clearance. Clearance the rails would have been close. Making a full table would have made for a bigger and heavier router table. Thanks!

[@SattvaWoodworks]

Thanks again Gary. The tools and jigs AND shop adjustments never end! :)

[@neilhjelmeland1340]

I'm not sure I understand what you mean. I know making the router table longer would have made it heavier but I'm not understanding why you didn't want to remove the gray wing and run the new router table all the way to the cast iron top.

[@johnbabcock2068]

I have the identical saw but with the Craftsman label on it. I'm going to see if I have that same t track on mine. I have been thinking of building a whole cabinet for my saw. I have a great router table now that I bought in Canada it looks like a piece of furniture but it would be nice to have a second one set up for round overs. Very nice job and it was wise of you to paint the bare MDF because it will soak up moisture as the years go by.

[@GaryLundgrenCrafts]

Thank you!

[@josephspina7827]

Great video , well explained.

[@GaryLundgrenCrafts]

Thank you! Hope you got the inspiration.

[@Marcus_Caius]

Practical and very well done!

[@GaryLundgrenCrafts]

Thank you!

[@boxmfg]

Nice router table added to your Ridged table saw. just got my table saw R4512 want to do something like that to mine. thanks for sharing. got my sub...

[@GaryLundgrenCrafts]

Thank you! Hope you enjoy your table saw.

[@stevenbaker4220]

Great job. I am a novice but looking to do something similar in my new jet table saw

[@GaryLundgrenCrafts]

Thank you!

[@mathwiz235]

Nice design, I like it. Now, i just have to start saving pennies for MDF and T-tracks! Thanks for the great step-by-step tutorial showing us what you did. It looks like it turned out great; hopefully it works as well. Let us know if you thought about any ways to improve the design after using it a while.

[@GaryLundgrenCrafts]

Thank you!

[@JeronimoJGC]

Great Video, thanks for sharing!

[@GaryLundgrenCrafts]

Thank you!

[@jamiej16]

Nice work!

[@GaryLundgrenCrafts]

Thank you!

[@couchpotatoe244]

fantastic, great job!

[@GaryLundgrenCrafts]

Thank you!

[@Wil_Bloodworth]

Great work!

[@GaryLundgrenCrafts]

Thank You!

[@ramaroodle]

Very nice. Time to upgrade mine.

[@GaryLundgrenCrafts]

Thank you!

You did a nice job 👍👏

[@GaryLundgrenCrafts]

Thank you!