Rovan 71cc set up with the correct pipe size and must do setup tech talk

talk about pipe, and reed block and setting up your Rovan 71cc

[@GWT181]

Great explanation of how the pipe works. You have a winner. 👍👍

[@CrucialRC]

Good info here. I would love to try one of these pipes out. Thanks for sharing!

[@kgm5512]

Very informative video! You are doing great things for this hobby

[@robertblunden7160]

Thank you, I was in hobby 10 years and back than and i spend upto $30,000. This time I when a different way getting the cost way down to a point. Your lucky because you can buy the good gear in the USA were here not much here and it cost a arm and leg to post to here from over seas and Australia dollars is weak and so this time around I making hobby work for me . Making the pipe for Wade does time to make as I am looking at a different direction making pipes by using water pressure and the exhaust will have better flow and lighter. This year coming I'm buying new tooling and getting things done laser cutting. The whole idea is get the cost down. The Rovan 71cc is perfect platform to work on even alot engine builder will touch them but ha the challenge is there to make into a diamond 💎. I love the challenge and happy help Wade out if we have to make changes to make it better again. I have work out the right set up for this engine, your gearing, clutch spring, and pipe to suit your engine is the most important , if you do not get that right the will not show its potential . I doing a bit of R&D work on Chinese Reed blocks which 3/4 cheaper than DDM which I do a video in couple weeks or earlier . I work out how to do my videos when testing, put the phone to your head LOL and i will do some real bashing I promise you that. You will get there with your 71cc. Remember gearing , clutch spring, and pipe size and tuning are the most important them to make that engine shine!

[@paintendaveextremecollisio8057]

Great video 👍

[@harisrahmad4829]

thank 's to the vidio...👍👍

[@srerccustoms537]

Great video brother.the pipe is a hit bin giving out your email all day and night lol enjoy

[@modularrc6428]

Great work on the Rovan 71cc engine and custom pipe setup. You mentioned buying better springs for the Rovan Rear 10mm Shocks. Which springs are they? The stock rear 10mm shock springs are way to soft and I’m looking for upgraded springs also. Thanks for sharing this great information!

[@robertblunden7160]

Thanks, the springs are from RCMAX and they make the springs in England and they .4mm thicker

[@Myth-Busters797]

I had a question do you no where I can pick up a Baja pipe for the 71 I just pick one up thanks great job 👍

[@robertblunden7160]

There rovan one for 71cc, but they are no good as they are too small

[@andonandonian7814]

Thanks for the video and time ... One question ..i know you explained it in the vid but i didnt understand .. about the reed will the stock reed that came with the engine run fine or not.... And if i get the engine from rovan and port it like i do with the 36cc or 45cc is it a good engine to run . With a good exhuast .. im looking forward to have 71cc for my rovan WLT ...

[@robertblunden7160]

No rovan engines do not come with reeds, the reed block is bolt on and have put another transfer port for extra fuel plus do a window port on the inlet side of the piston, how a reed works is let's fuel in and cannot come back to the carby, it works like inlet valve on a 4 stroke so you can run more port duration timing on the inlet side if your two stroke. For the motor to buy would be 71cc and it be more bang for your money

[@Ryan-gf3jf]

Great vid ! i seen you got that TAYLOR HD vented 54mm bell carrier for Baja will that work with stock clutch bell and clutch?

[@robertblunden7160]

I had to buy black bone clutch bell which runs a 15 mm DIA bearing so had to buy that clutch bell carrier to suit so use high speed gears from black bone

[@Ryan-gf3jf]

@@robertblunden7160 ok so the stock clutch bell wont fit the diameter of the bearing

[@robertblunden7160]

Will not fit as the bearing biger, stock bell is 12mm as for the Taylor is 15mm. Rovan makes a 15mm heavy duty clutch carrier and has clutch bell to suit with hex drive set as a kit only. The only reason I brought Taylor and black bone was for the high speed ratios as the rovan 71cc loves 26 teeth pinion onwards. Plus I needed a unbreakable setup

[@Ryan-gf3jf]

@@robertblunden7160 i see thanks for the great info! keep up the great vids!

[@fablabengineering2015]

Where u based Robert? I’m based in Sydney and also make pipes n bits. I’m part way through building a dyno and would love to love to do a comparison at some point if your keen.

[@robertblunden7160]

Campbelltown, I be keen on the idea as I be doing alot pipes next year and different reed setup and making pipes a different way using water pressure

[@fablabengineering2015]

@@robertblunden7160after the new year let’s get in contact, I’m flat out atm with a backlog of work. Have a good new year

[@robertblunden7160]

Have same problem flate out,hope to catch up

[@Angry-Lynx]

i cant believe someone actually bought 71cc from rovan XD considering how shitty is the 45cc... but on the other hand 29cc from rovan baja is not bad i like it, it always starts very easily allmost always first pull and have decent power for something as cheap

[@robertblunden7160]

71cc are a more better made motor, 45cc cylinder is not made good, 29cc are made better and cheap good for the money, 45cc over price for what they are

hello dude. I have a question about the turning servo. Can you tell me what this model is?

[@robertblunden7160]

Rovan 65kg model number RS2065D

@@robertblunden7160 Thanks dude

[@yaseenamin8056]

Hey can you send me the design for the 71cc pipe ?

[@nightmaregames3352]

have you thought about a twin engine cylinder

[@robertblunden7160]

Twin cylinder good , but I happy with rovan 71cc as experience plus I have 5T with RCMax Taylor supreme 71cc same power wise as a twin

[@nightmaregames3352]

@@robertblunden7160cool and your video helped me with issues I was having

[@amirnewson1905]

Hey bro I'm very interested in purchasing that side pipe and would like to talk with you asap thank you

[@robertblunden7160]

I have two different price one pipe no cuplin is $292US and the other pipe with cuplin weld in is $360 $US and Shipping is $52US express post

[@user-wu2qm1ju8b]

What is the needle settings

[@robertblunden7160]

I will get back to you on the setting as I run a different setting with my own pipes. All different pipes run a different setting. A basic setting would be 11/4 turn out on L ans H

[@patgray2742]

Hello I have a rovan 71 piston port an I’m very interested an getting that pipe to try how do I get in contact with you

[@robertblunden7160]

$291US with no cuplin and the other pipe with cuplin $360US and $51us shiping with express post

[@patgray2742]

@@robertblunden7160 ok but here the big question I have a Baja Max 5T it has a Rovan cage on it that will it fit I’m looking at your chamber it’s huge I don’t no if cage will get around that do u have Facebook u can see my truck an decide

[@robertblunden7160]

Pat it should fit as the one I build Wade was to suit a truck body and he does not run standard rovan cage, if you have the big plastic cage it should fit in plus should fit sand rail steel cage on the Max that came out with.

[@robertblunden7160]

@@patgray2742 you can email [e-mail] with photos

[@fpvandgasrc4321]

Would love to see if you can make me a 45cc side pipe for a reed case or cylinder reed 45cc rovan engine.. will pay! Thanks

[@robertblunden7160]

At this stage I just doing 71cc but later I can do a 45cc

[@fpvandgasrc4321]

@@robertblunden7160 ok. Got ya.. I think k that pipe for the 71 u have there would work on the 45 no problem..? What do you think

[@robertblunden7160]

Depending on much work done on the head and the pipe stinger be down size from 20mm to 18 mm stringer

[@johnwhitehead5339]

What pipe did you use?!!!!

[@robertblunden7160]

I make my own pipes

[@kenturmon9428]

Jesus hold the camera still

[@robertblunden7160]

[e-mail]

[@patgray2742]

What is your email so I can contact you about pipe look forward to hearing from you

[@robertblunden7160]

[e-mail]