Rovan Baja Easy Start Disassembly | Ezee Racing

[@EzeePosseTV]

Love your brand name 😏and love the video, was quite ezee to understand. Aye😎👍

[@EZR]

Thanks man. Much appreciated. I see you've gotta a pretty catchy brand name too 😉

[@sammiller8497]

Can you put a 32 cc head. on a 30 cc block?, will it work ? Thanks.

[@EZR]

Howzit No unfortunately they have two different size blocks. Small block 23-30.5 Big Block 32-36

[@jukkaovaskainen]

👍

[@EZR]

Thank you so much for watching! 🎥

[@johnsonjohns6328]

Do you know which if any zenoah kits, that will bolt to a rovan 36cc?!! If only i could be so lucky with my cemetery full of pull starts easy & regs....!!!

[@EZR]

Yeah Pullstarts can be a pain in the ass. Best one in my opinion is the Regular CY pullstart from DDM. The Zenoah G320 cylinder will fit ontop of a Rovan 36 case and crank, but you will have to space the head so she don't bottom out. You will also need to swop the piston kit to a 38mm as the 36cc uses a 39mm piston kit. The Rovan 32cc piston works in a Zenoah Cylinder.

[@sammiller8497]

@@EZR I'm thinking of putting a 32 head on a 36 block will I have to use an Xtra thick base gasket? , thanks for the reply

[@EZR]

So the difference is a 2mm crank on the 36. I ln essence you will be building a 34cc. You will have to put the right amount of gaskets but that you will only know by building and checking. Place the 32 cylinder on without a ring and see if it bottoms out. Keep adding gaskets till it doesn't. You are aiming for a 0.3-0.5 squish.