Royal Enfield Class ic 350 - Fitting the Hitchcocks Decat Pipe and Performance Camshaft Test

This is a link to an Service Manual for the Classic 350 Reborn.
I’ve found it to be a bit confusing in sections, but it’s the best I can find at the moment. Hope it helps.
drive.google.c...

[@stevesanelli90]

Another great video & adding performance gains on this classic little motorcycle that just is a beauty. Well done 👌

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@ianhughesroyalenfield]

Brilliant videos sir. Having fitted the de-cat, my advice would be to leave a quarter of an inch of gasket protruding then tighten the clamp. This prevents the gasket shooting inside the de-cat, as it did on mine. I am very tempted with the cam……when funds allow, it might just have to happen. Thanks for putting these two vids together, I appreciate how long they take to create.

[@tigerness5555]

Hi Ian, Great to hear that you enjoyed my video and found it useful 👍 Thanks for your comments, very useful.

[@weemark67]

Very informative video, as normal. The excitement in your voice on the improvement this has made overall is fantastic.😊 It’s not about riding flat out, it’s that it’s got much more manageable improvement up throughout all gears, going up hills and overtaking, etc. I will be keeping eye out on Hitchcocks web site, for it coming into stock. The 3 upgrades looks like a well worthwhile purchase, improving on a great wee 350 bike. Well done Ian, best wishes, and nice to chat again on Sunday.

[@tigerness5555]

Hi Marc, great to hear that you enjoyed my video. I can tell that you’re tempted, a wee Christmas present perhaps 🎄🤣 I enjoyed catching up with you and the rest of the Enfield Clan on Sunday. Ride safe and keep smiling 👍

[@granthudson-artist-painter]

Wonderful progress on the modifications to the classic 350 , thanks so much, much appreciated !

[@Mike-j9q8z]

Hi, just purchased and fitted my decat pipe on my 350 following your video. Many thanks.Mike

[@tigerness5555]

Hi Mike, it’s great to hear that you enjoyed my video, and even better, found it helpful. Thanks for the feedback 👍

[@jackmcswigin3991]

U notice much sound difference?

[@brockett]

Well explained and demostrated, sensible modifications that make a refreshing change from the usual KZbin claptrap. A superbly presented motorcycle with cast wheels (I too hate spokes and innner tubes) and that exhaust has "the right sound". Along with the 'cam upgrade episode the best videos ever about this motorcycle.

[@tigerness5555]

Hi Brockett Thank you so very much for your very generous comments. It’s support like this that makes creating these videos so worthwhile. Hope you continue to enjoy my adventures into the future. Cheers Tiger Ness

[@Paul-67]

Well done and thank you for such informative vids. I am going to buy a Enfield and am torn between the classic and the Hunter, whichever one I have I will do the exact same 3 mods as yourself. It was great to watch you enjoying your bike after the mods.

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@MrAbbielover]

Thanks for all your videos....love having you show in detail your modifications. Too bad about the sound on this video...a bit distorted.

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍 Sorry about the sound. It’s never easy to get good sound quality in the helmet while riding. Perhaps I was also rather excited in this one 🤣

[@jamesonpace726]

Going to do these mods to my new '22 Classic this winter. Thank you....

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@kenmoore4737]

I had a longer run out today and the bike is running fine i can feel the power on hills stay in a higher gear on heavy banks just wants some fine weather again to have real good long run out thanks for your help again Ian.

[@tigerness5555]

Excellent news, glad to have been of help 👍

[@32laurens]

Loving this series! I would be very much interested in a follow-up video, where you discuss how you like the mods a bit further down the road (mileage etc). I read in a comment that you removed the FuelX and the decat pipe, I would love to see more about the reasons etc. Keep up the good work and most of all, enjoy the ride(s)!

[@tigerness5555]

Great to hear that you’re enjoying my videos and hopefully finding them helpful 👍 As my bike is now almost two years old, I plan on doing a review video of that. The questions you’ve asked should hopefully all be answered in that video 😁

[@32laurens]

@@tigerness5555 Great, I'll stay tuned!

[@mattdog1982]

You can tell with with your excitement this isn’t a placebo effect. Perhaps RE should release a gt350 with this as standard?

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@rickh8380]

I've always said that the entire Royal Enfeild line were way under powered. A 20% - 30% increase is nice indeed. Bike sounds great too. I would opt for the louder exhaust muffler myself, but that's just me. Good job. Money well spent. Ride safe and keep the rubber side down. Cheers from the States. Beautiful countryside there. New subscriber also.

[@tigerness5555]

Hi Rick Welcome to the channel 😁👍 Great to hear that you enjoyed the video and hopefully found it useful in some way.

[@djrichylaurence8991]

I fitted a de cat exhaust, high flow air filter and changed the rear sprocket for a 36T to my Scram 411. It goes really well and I don't need to throttle it hard. If you're going to the expense of changing a camshaft you may as well just buy a more powerful bike.

[@tigerness5555]

Hope you enjoyed the video. I have two more powerful bikes in my garage, it doesn’t stop me tinkering with the fabulous Classic 350 though 🤣👍

[@berryslokker8949]

Hallo tiger, loving your video's. Just bought a 350 classic. I am more confident now to install the performance camshaft. Thanks for that. One question: i am in the ridin in period 300mls. Do you advice me to wait after the runnin in period to make the upgrades or do it while making the first oil change at 300 miles? Thanks again for your optimistic and learnfull video's. Berry from Holland

[@tigerness5555]

Hi Berry Congratulations on becoming a Classic 350 owner, like many I’m sure you’re enjoying this fabulous little bike. If I was you, I would wait until the engine is more than just run in, probably around the 2,000 mile mark minimum. The engine will benefit from this bedding in period before being increased in power. Great to hear that you enjoy my videos and are finding them helpful 😁👍

[@PhilipBallGarry]

Another brilliant couple of videos Tigerness - thank you! I did read that once the cam is fitted you should not allow the bike to idle at all for several minutes? This is counter intuitive with the ECU reset procedure though. I doubt it makes any difference to the bedding in process but I wonder if you could carry out the Kent Cams initial running instructions first, then allow the bike to fully cool (overnight?) before doing the ECU reset? Edit: Sounds like the 16T gearbox sprocket might definitely be worth a revisit?

[@tigerness5555]

Great to hear that you enjoyed my video and hope you found it useful 👍 What you have said is correct and it’s what I actually did. I did fit the cam first and ran it for a day or so before fitting the decat pipe and making the second video. I should probably have mentioned that in the video, too late now 🤣 I may try refitting the 16T sprocket at some point, really enjoying the bike as it is though.

[@kenmoore4737]

Hi Ian I went back to the cam and checked with your measurements and I had I right as I had set it for TDC which I'm pleased I did so your measurements were spot on. I've had the bike running and it seems ok but a bit louder so when I get the other bits of maintenance done I'll be trying it out on the road. Thanks for your help again videos very informative. By the way where do you get the information re torque settings and so on I've only got the handbook and don't think Haynes do a workshop manual for our bikes as yet.

[@tigerness5555]

Hi Ken, great to hear that all is well with your camshaft installation. I did a google search for a service manual and found a link to one on a Royal Enfield Owners Forum. The site is in Russian but the manual is in English. It does work and is the place I got mine. www.royalenfieldowners.com/index.php?threads/meteor-350-service-manual-pdf-available.2050/ Hope this helps, safe riding.

[@kenmoore4737]

Hi Ian I have managed to download the meteor manual, thanks for the link. I have had a short run out on the bike but just for 16 miles it wasn't a fair test the rain started pouring down in fact some sleaty snow for a short while, hopefully I might get a better run tomorrow weather permitting. Some of your KZbin shows you putting on a Xlight is it still on your bike? and a decat pipe but also a stainless steel full exhaust system.

[@ianness2315]

I didn’t like the Hitchcocks free flow exhaust, it was just too loud for me. I only put it on the bike because of the free flow exhaust and sold it along with that exhaust system a while ago. In retrospect I should have kept it as it would be good to try it on the bike with the current setup. As my bike runs really well, it’s hard to justify buying another one.@@kenmoore4737

[@thomascastle1311]

Would it be possible to simply cut a round hole in the stock air filter cap for greater flow?, or does the design of the stock filter cap make that unworkable?

[@tigerness5555]

Yes you can do this, there’s videos on KZbin from people who have done that. The only down side is that if you ever want to return the bike to standard, then you’ve destroyed the original cover. Hope you enjoyed the video 👍

[@lisamitchell1355]

We’re in the states , my husband just purchased the350 Classic, 2022, he wants to know if you can tell the link to purchase the camshaft, and the Hitchcock decat pipe

[@tigerness5555]

Hi Lisa Hope you’ve enjoyed this video and great to hear that your husband is now the proud owner of a Classic 350. Please find links to the decat pipe and performance camshaft below 😁👍 Decat Pipe: accessories.hitchcocksmotorcycles.com/47939?cont_page=Royal-Enfield-350-Classic-Accessories&category=top5 Performance Camshaft: accessories.hitchcocksmotorcycles.com/48439?cont_page=Royal-Enfield-350-Classic-Accessories&category=top5

[@andrewroberts2213]

Sorry if this has been asked or answered before but have you had to fit a fuelx following your mods? I have the filter cover and aftermarket exhaust without baffle and thinking of the decat (meteor) but don’t want to do the fuelx. Cheers

[@tigerness5555]

Hi Andrew I do have a FuelX Light on my bike, I basically fitted it because of the other modifications I’ve done to my bike. Was it worth fitting, a truthful answer, I don’t really know. All I can say is that with the modifications listed below my bike is performing really well. I think it’s about as good as it can be without changing the throttle body / ECU unit to get rid of the maximum 73mph speed limiter. Haven’t managed to resolve that issue as yet. Hope this helps 👍 The engine modifications I’ve made to my bike at this time: High Performance Camshaft De-Cat Pipe Hitchcocks open air filter cover (I DO NOT have a DNA air filter) FuelX Light 16 tooth gearbox sprocket

[@andrewroberts2213]

@@tigerness5555 thanks for your reply, that’s really helpful. I think the only reason I would fit it is if without it I would be damaging the engine with the mods I’ve made but unsure whether you’d ever really know until it was too late.

[@tigerness5555]

That’s exactly why I fitted mine 🤣👍

[@richardclark716]

How has it changed the mpg?

[@tigerness5555]

I really don’t know, it probably has but very slightly. It still returns amazing fuel consumption. Hope you enjoyed the video 👍

[@aidylyall883]

Great video as usual. I have the same bike as you, do you have a link of exactly what ill need ? Please

[@tigerness5555]

You should be able to find all the parts you need here for your classic 350. accessories.hitchcocksmotorcycles.com/information-and-services/Royal-Enfield-350-Classic-Accessories Hope you enjoyed the video 👍

[@aidylyall883]

@@tigerness5555 so I'm guessing I need the decat pipe and end can?

[@tigerness5555]

I only have the decat pipe on my bike, i still use the standard silencer. This works for me and gives a sound level that I like.

[@stevepellowe325]

Great video. I didn't have a nut and washer on the cat frame mount, just a threaded clip. Did you have one or just add it?

[@tigerness5555]

Great to hear that you enjoyed my video 👍 I can’t remember if the decat pipe came with a new nut and washer. I would have had one anyway 🤣

[@edwardotto1528]

Do you feel the need to inform your insurance company of these mods - especially the cam upgrade ?

[@tigerness5555]

Hope you enjoyed my video 👍 I’ve not informed my insurance company. The bikes top speed hasn’t changed so the bike stability and braking is just the same. Anyway, without stripping the engine and measuring the camshaft, how would they ever know 🤣

[@edwardotto1528]

I understand your position and agree. I enjoyed both of you videos that covered the Kent cam shaft installation and will buy a 'full set' for my Meteor.

[@simonwalker7957]

I agree although you have just told the whole world what you’ve done😅😅😅😅😅. Another fab video and food for thought.

[@kevindarkstar]

​@@simonwalker7957exactly, unfortunately you have literally provided video evidence of the modification to the bike which an insurance company could and would use to get out of claim 😮

[@jimstewart2141]

Thanks for these really fun and informative videos, just wondering why you did not add a DNA filter? Is there any reason? As i have always thought the cheapest performance upgrades are, more air in and quicker release of gases. Love to know your thoughts, thanks

[@tigerness5555]

I’ve had similar K&N filters in the past, they were a lot more expensive than standard filters and the cleaning and re-oiling of them was a pain. I also don’t think the cost is worth the very slight potential power increase. The DNA filter does give more induction noise but that’s not necessarily more power. I’ve setup my bike exactly as Hitchcocks did for their performance camshaft test on the Dyno. I’m now very happy with the performance of my bike, it’s definitely much better than standard. Great to hear that your enjoying the videos 👍

[@jimstewart2141]

Thanks that is good to know why you made your choices. Good luck with the channel and please keep making the great videos.@@tigerness5555

[@RebelCowboysRVs]

Interesting video. More lift generally gives more power over all. Same with opening up the flow. More air an fuel equals more power from top to bottom. Moving the timing of when it opens moves the RPM range it is being produced. That graph shows a slight drop in power at the bottom an lots more power at the top. So that makes me think it has more aggressive timing. Not much more I am sure because its a wast to push the power above the rev limiter. But without O2 reading, I cant say that the engine management is not just doing a bad job of off idle fueling for all that extra air. I have been wondering why everyone is adding these aftermarket fuel systems on a new bike that should have a learning system able to correct for mods. Can the system is has not do its job? I have not found any videos showing O2 reading. Just videos guessing, taking upgrade companies word for it and/or butt feel. This is the first video I have seen to even state the fact that new bike have learning systems. In lots of other peoples videos they dont seem to know that or chose to not talk about it.

[@tigerness5555]

Many thanks for your very informative and interesting comments. It’s very difficult to know if fitting a FuelX makes any difference. I have just purchased one (still to be fitted), not for any performance gains but hopefully to ensure the engine has the correct fuelling following all my modifications. It’s simply a belt and braces situation for me as I’m pretty sure my engine is performing really well. Hope you enjoyed my video 👍

[@niallwildwoode7373]

Some caveats here. My cat tube hanger did NOT have a captive nut behind the bolt. It was the worst....what seems to be a combo of a Nylok +Loctite on a free nut with the bolt through an AV bush....I'm wondering if RE has shares in Loctite as the bloody stuff's everywhere. I've damned-near rounded the bastard trying to get that back nut off, and now am looking for a 12mm ring spanner off my mates to hopefully save the day, before I get the angle grinder out. Guys, it's NOT as easy as it looks, if the build has been 'economised'.

[@tigerness5555]

Sorry to hear about your experience, that certainly wasn’t the case for me. I didn’t have any trouble whatsoever and have found the build quality of my bike to be very good. Hope you enjoyed my video and found it helpful 👍

[@richardcrighton8079]

here's another one. i'm coming up to replacing the tyres. how are the avons?

[@tigerness5555]

Great to hear that you enjoyed my video and hopefully found it helpful 👍 I’m very happy with the Avon tyres, they handle and grip very well. I would buy them again for this bike.

[@andrewrussell6238]

I see you use the standard air filter, not the DNA , is there a reason for this ?

[@tigerness5555]

I hope that you enjoyed my video and found it interesting 👍 I find the standard filter is fine, don’t think there’s much to gain from fitting the DNA one.

[@mr2bmw]

Hello, if I just remove the cats, do I need to do anything else? The idle procedure etc? Thanks👍 Love you videos.

[@tigerness5555]

In my opinion you only need to do the idle procedure. Great to hear that you enjoy my videos and hopefully find them helpful 👍

[@mr2bmw]

@@tigerness5555 Thank you👍

[@MrMoneyHelper]

Please tel us about the gas mileage with the new cam installed. Has it improved or lessened?

[@tigerness5555]

I don’t know is the simple answer. As the valves now open slightly more , I suspect there will be a slight decrease in MPG. The fuel consumption of this bike is absolutely brilliant, so it really doesn’t matter 🤣

[@MrMoneyHelper]

It does to me. Every tank gets a reading. My last one was 81.79. The one before that was 60.5 mpg US. Seeing that difference meant something was off if there weren't any unusual riding. @@tigerness5555

[@motok8425]

Fuel quality and the way you ride

[@MrMoneyHelper]

One tank was just riding at 25-40 mph. The lower reading was when I crossed town and traveled on some 50 mph roads. @@motok8425

[@nevillewatkins4997]

I enjoyed that. And I ride a Lambretta. 😄

[@tigerness5555]

Great to hear that you enjoyed my video 👍

[@JacquelineNelson-c4n]

I’ve. Can see and hear the difference. It even sounds so much better if I had one I’d do the same. Lemay. Nelson. Vancouver Washington. Northwest pacific coast.

[@tigerness5555]

Great to hear that you enjoyed the video. Perhaps one day you will also own a Classic 350 👍

[@JohnMills-ov8qx]

Excellent.

[@tigerness5555]

Great to hear that you enjoyed my video 👍

[@tim46767]

What are catalysts for? Shame on you.

[@tigerness5555]

Obviously there for removing 🤣 Hope you enjoyed the video.

[@tim46767]

What a narcissist! We certainly don't need you to become a polluter. Any asshole can loosen three screws. You probably don't have children or grandchildren. Good this way. The only good thing is that you are a very old man. They won't pollute the air much longer. Tick Tock 😁🤣😂@@tigerness5555

[@kjm-ch7jc]

If people really care about the air we breath they wouldn't make the modification to the exhaust system.

[@Paul-67]

The difference in air quality from a de-cat single cylinder 350cc petrol engine is absolutely negligible.

[@kevindarkstar]

Exactly, maybe you should consider speaking to China, India ect 😊

[@davericketts9101]

Agreed Kevin, assuming you were replying to Paul-2429`s comment @@kevindarkstar

[@kevindarkstar]

@@davericketts9101 yeah

[@tigerness5555]

I care about air quality, that’s why I always ride on quiet country back roads away from people 🤣 Hope you enjoyed my video 👍

[@_Ulisses_]

Great videos. Thanks for sharing. Just one observation, if in dynamometer the power (in wheel) went from 15.57 to 20.46, then the increase in power was not 20%, actually was 31.41% nearly one third of gain, which is very, very impressive on any bike. 😃

[@tigerness5555]

Yes, you are right, I meant to say an increase of over 20%. Great to hear that you enjoyed my video 👍

[@Tonyv1951]

What I like about these videos is the superbly clear explanation and clarity of the filming. Really professional amateur videography. Thanks. EDIT: I just went to the hithcock's site to look up prices and there is no price on the camshaft - it is unavailable right now. How much was it please?

[@tigerness5555]

Thank you for your kind comments 👍 The camshaft cost me £276

[@TheNorfolkThunderbolt]

I have just bought my Classic 350, to join my Meteor in the garage. My Meteor has the full stainless steel free flow exhaust, DNA filter and intake kit, and the FuelX module. They are fairly good. But now I’m going to try this mod as you have suggested on my Classic 350, and will be interested in seeing the comparative results….. Thanks for doing all the videos, it has taken out most of the guesswork for me!

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍 It would be good to know how your two bikes perform if you fit the camshaft to the Classic 350 😁

[@TheNorfolkThunderbolt]

@@tigerness5555 yes, very useful! Also I had a good conversation with the chaps at Hitchcock’s today about the dyno figures and my forthcoming parts order, so I will be interested to see how your cam beds in and how well your bike performs on the Scottish roads!

[@benti_3748]

Just for the sake of knowing, what is the actual top speed of your meteor rn?

[@richardcrighton8079]

done! and you're right, it's a real noticeable improvement. very pleased!

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@hunterrider349]

Another excellent video, please keep them coming, after seeing these cam videos I'm going too get one for my hunter, it's good too see an impartial review of one,your laughter says it all 👍

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@paulfoster5432]

Excellent stuff, Wouldn't mind putting this cam into my Hunter 350, Have you thought about putting a 16 tooth cog conversion, considering it's pulling better 👍 I'd also Go the whole hog and actually fit the DNA air filter, I've fitted the DNA Air Filter on both my Interceptor 650 and my Hunter, But as yet only the 16 tooth cog conversion on my Interceptor, I'm planning to get one for my Hunter, But I may consider the cam after seeing your video 👍 Cheers Paul

[@tigerness5555]

I have a 16 tooth gearbox sprocket and may fit it again at some point. I love the bike the way it is now and don’t wish to loose the top end punch that the engine now has by raising the gearing. As for the DNA filter I think any very slight improvement isn’t worth the expense and trouble. Hope you enjoyed my video and found it interesting 👍

[@stevenmiller184]

This was brilliant. Your joy over the bikes improvements are infectious. I suggest you look at "Foxy's" video on his Classic 350 mods. After doing the intake and exhaust mods, he put the Fuel x lite on his and he noticed that there was not really a change in performance, just a smoothness of throttle response. The big change he noted was that the exhaust temperature was halved.. this could have some serious implications with regards to wear and longevity of the engine. I suspect that these intake and exhaust mods run the bike very lean, beyond the ability of the OE fuel management system to compensate for.

[@mattdog1982]

Similar to the euro 4 650s. A booster plug is recommended for a full exhaust change.

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍 I’ve watched Foxxy’s videos and would question the references to halving the exhaust temperature. My bike runs perfectly, it’s smooth, no snatching throttle or anything, just runs very well. I’ve taken the spark plug out a few times to check the colour and condition and it’s also perfect. So for the moment I don’t see the need for fitting the FuelX. I followed what Hitchcocks have done on their video. I have a Booster Plug on my Bonneville SE and it works on that bike.

[@longjonwhite]

It could be argued that smoothing out throttle response IS improving performance. Performance is based on various factors, eg. handling, braking, even comfort, not just speed and acceleration.

[@PhilipBallGarry]

​@@tigerness5555 I agree with regards the fuelX device. To me, it's a bit of a bodge akin to leaving the choke out slightly in the days of such things. But opinions vary and I would certainly not disapprove of others wishing to fit the fuelX. It's your bike after all 👍

[@longjonwhite]

@gilburton I also have a 2009 Yam WR250R, with de cat pipe, aftermarket zorst, air box mod etc and fitting a Booster Plug on that has just made the bike so much smoother at low speed, makes her much more enjoyable/easier to ride; ergo: performs better.

[@christopherlynch235]

Excellent stuff Tiger Ness. Working my way through all your vids.Superbly presented and an exceptionally useful insight to fantastic mods.Very much appreciated .Keep it up.

[@tigerness5555]

Hi Christopher, great to hear that your enjoying my videos and hopefully finding them useful. Thank you for your comments 👍

[@GerryPowell-r6s]

Now that sounds and looks an improvement,real upgrades that works

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@trevorthorn5011]

Hi do you use e5 fuel ⛽️? I find it helps performance and is better for engine great video 👍

[@nealeburgess6756]

Looks like a good set of upgrades. I imagine that in normal riding there might also be an improvement in economy, as the extra pulling power would enable you to use higher gears at times. I was surprised to hear it has a top speed limiter, in addition to a rev limiter. Is it possible to remove the speed limiter? By the way, I loved the roads that you rode. Lovely scenery.

[@tigerness5555]

Great to hear that you’re enjoying my videos and hope you found them useful 👍 I don’t expect the economy will have improved, it’s such a frugal machine on petrol that it’s not really an issue. In theory it may be possible to fit the throttle body/ECU from the Hunter as it’s not top speed restricted. Given the expense involved it this it’s debatable if it’s worth doing.

[@ianness2315]

That’s interesting, I have met and talked to a Hunter owner who has also fitted the performance camshaft to his bike. He claims to have reached a top speed of 87mph. I don’t know if different markets have different setups, or if later ones are unrestricted.@gilburton

[@fatehbajwa]

Check out Powertronic V4 for the rev/top speed limiter.

[@davidhiggins7026]

Maybe a Royal Enfield dealer can fit those items to a 'J' series 350 at initial purchase of a new bike, with the benefit of having virtually new & almost unused spare parts to help offset the costs. Far better than Joe Blow new owner having those parts sitting around the place in their garage that would likely have some usage already out of them. An interesting & entertaining video on the whole, we see then that 20hp at the rear wheel is obtainable, which would likely be about 25hp at the crank. I suspect with a few other mods 30 hp at the crank is achievable, not particularly what a RE 350 Classic is all about but I say a good 30/30, that being a 30hp & 30 ft/lbs of torque is good enough for most folk even in these days. A 'J' series new 500 then would likely fulfil that criteria. I do have a hope that the main reason the new liquid cooled 452 engine is not a 500, (which I would have ensured it was!). That Royal Enfield soon plan to bring out a 'J' series 498cc engine to slap in the RE Classic & Bullet, whereby the >>older

[@tigerness5555]

It’s worth asking a dealer if they would fit it for you. They would probably bring up the warranty issue though. Great to hear that you enjoyed my video 👍

[@ejakeway]

Loving all this information. You're making me now consider upgrading my bike as well! I ride a lot around 100-115 kmh so anything to help me get to and maintain that speed better on hills would be fantastic.

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@lambo2817]

Hi mate, i thought you fitted the full hitchcocks decat system already? Did you go back to standard? If so why? Too loud? Only just started watching this video so ignore if you cover this lol keep the videos coming matey you’re doing a good job! 🎉

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍 The noise was just too loud for me, especially on a long ride. The standard system with the de-cat pipe is just perfect for me.

[@Sticky-gp2yh]

Bedding the cam in is contradictory to Enfield advice on ECU learning....ie keep it revving between 2k and 3k for the first 15 minutes and do not allow to idle during this time. Personally I don't think either make any difference, fit and go out and ride, the ECU constantly monitors air and fuelling and I see no logical reason for the idling for however long to let it learn. Anyway, love the mods, particularly your demonstrating the cam fitting..might do it myself when Hitchcock's gets more in.

[@tigerness5555]

Great to hear that you enjoyed my video 👍 I did actually run in the new camshaft as you described, the video was made days after fitting it. I just followed the ECU learning process as found in the service manual I found online. Interestingly, when all the parts were first fitted there was some popping from the exhaust when closing the throttle. After the ECU learning the popping has completely gone, so it does seem to work.

[@Sticky-gp2yh]

Maybe....I've only fitted the decat pipe and it was a bit poppy, but it's really sweet now, and I did do a 15 minute idle. After first service really rides on song round country lanes. It can be ridden quite sportily in fact as well as a plodder.

[@jonsherry6289]

Any reason for not upgrading air filter?

[@tigerness5555]

I don’t think the DNA filter would provide any noticeable difference. Also it’s expensive for what it is and I hate having to clean and re-oil air filters. Hope you enjoyed my video and found it useful 👍

[@jonsherry6289]

@tigerness5555 yes, loving the videos, I have an interceptor and a scram at the moment and would dearly love a classic 350 to finish the fleet

[@OddSpanner]

Excellent video TN! Loved it thanks! The joy and glee in your voice on the test ride, that was awesome. I guess I'll stop umming and ahhing and get the cam now!

[@tigerness5555]

Great to hear that you enjoyed my video and found it interesting 👍

[@kristophertrout7328]

I believe that 20% horsepower increase is a little low. Your base horsepower at the wheel is 14.7. The horsepower is now 20, an increase of 5.3. From the original 14.7, this is an increase of 36%. not 20%. Cheers. 😎

[@tigerness5555]

I meant to say an increase of more than 20%, which as you say it is. Hope you enjoyed the video 👍

[@petergonderman4610]

Could you please put the link up for the workshop manual.I’ve had my halcyon grey for 18 mths now.I just can’t find an actual workshop manual.Kind regards from Australia

[@petergonderman4610]

I’ve been toying with the idea of upgrading to a motoguzzi 850 but I just love the classic so much. This would work. 11,000 trouble free klms .Thanks again. I’m sold on this route instead .Cheers

[@tigerness5555]

Hope you enjoyed my video and found it useful. I’ve just put a link to a service manual in the video description. This is the same link: drive.google.com/file/d/1W1423jB25CfLSj88eQSwQJFw5m0k95nI/view

[@petergonderman4610]

Much appreciated

[@bobman7881]

Thankyou so much for taking the time to do such detail in both videos Really helpful!

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@widephil]

Great vid... but can I ask why you wouldn't think a dna filter wouldn't make it run better again ? Also have you removed the fuel x lite you fitted, surely this would also assist optimal running ?

[@tigerness5555]

Great to hear that you enjoyed the video. I sold the FuelX along with the free flow exhaust system. In hindsight, I should have kept it 🤣

[@madmaikol8612]

Great DIY, one question at what km on the odometer you do all this mods? I have decat pipe, DNA stage 2 and Powertronic V4, but only 50km in my classic 350 just have it for 4 days, Im thinking made all the mods arround 500km what do you think?

[@tigerness5555]

If I was you I would wait until the bike is at the very least, fully run in. Get to know the bike, understand how well it performs in standard trim, only then will you know if any or all the modifications you make are worthwhile or not. I also assume that it’s a brand new bike and that the manufacturers warranty is important to you. Some changes may invalidate the warranty in some dealers eyes. I didn’t make any performance modifications to my bike until it had done around 4,000 miles. Hope this helps 👍

[@robedmunds7163]

High revs and big single may mean pricing a new big end, which is probably why RE restrict the perfomance. Should be okay if you are sympathetic generally.

[@tigerness5555]

This new engine has proven to be very strong and reliable. Yes, if like any other engine, it’s thrashed constantly and not maintained, it will eventually fail. I definitely do not ride my bike in this way, I have sympathy for the engine. Hope you enjoyed my video 👍

[@YOURS1]

@@tigerness5555as someone who works in RE chennai plant i differ with your opinion. RE engine components and its quality is no where as good as Japanese motorcycles😮 removing cat is not only makes it illegal and it literally messes up the engines reliability😂 btw, its your motorcycle and stupidity cant be fixed🎉

[@ragimundvonwallat8961]

@@YOURS1 your wisdom is greatly appreciated particularly from a knowledgeable person working at the plant, with no education and screwing that one bolt on the prod line lol

[@bfarm44]

@@YOURS1decating the pipe will not hurt I’ve been modifying bikes for 39 years maybe stay in your safe space and leave the tuning to those of us who actually do that and don’t worry about silly laws

[@keithpearson7539]

Not sure I would class this machine a BIG single.

[@richardcrighton8079]

just replaced the hitchcock's straight thru pipe with the de-cat. that is absolutely the trick. 100%

[@tigerness5555]

Yes, the standard exhaust with the decat pipe fitted is in my opinion the best setup for this bike. Great to hear that you enjoyed the video 👍

[@ricardopatto4580]

Nice video! Congrats! What do you think will happen if you increase the DNA air filter?

[@tigerness5555]

Very little I recon, definitely not worth the extra expense. Great to hear that you enjoyed my video 👍

[@briansmith611]

Ive done all the mods on my meteor except the camshaft. just waiting for them to be available again!!

[@tigerness5555]

Hope you enjoyed my video and found it helpful 👍 It’ll be well worth the wait, I’m very happy with my camshaft upgrade. Now done around 4,000 trouble free miles with it installed.

[@allanb52]

I want to know what all these things do and no one wants to do this. I have heard from some who did the decat, filter and fuelX and said there was every little difference. Just ruined the mpg. Hitchcocks said 10% from just filter upgrade, so I don't know. However, your results sound encouraging.

[@tigerness5555]

Hi Allan You’re quite correct, on their own, the decat pipe, filter and FuelX will not make much difference in performance. The bike will go a little bit better and will sound louder giving the impression of increased performance. The performance camshaft along with some or all of the other items definitely does give more power. That said the bike does not have any increase in top speed due to the ECU attached to the throttle body restricting top speed. It’s debatable whether any of these performance improvements are worthwhile, the standard bike is very good in its own right. You have to rev the modified bike much more to extract the power. The engine is quite happy doing this and has proved to be problem free. Would I do it all again, being honest, I’m unsure. Hope this answers your question 👍😁 The modifications I’ve done to my Classic 350 are: Decat pipe Open air filter cover, with standard filter (not DNA) FuelX light Performance camshaft 16 tooth gearbox sprocket

[@AlanRosborough]

I have rhe Hunter and the Classic.Waiting for the Meteor Aurora Blue to arrive.I have the cam sitting waiting until I get some miles up on the Hunter.My Hunter hits 86mph in standard trim, I weigh only 52 kgs.I am interested to hear your thoughts on the recently available big bore kits.I'll probably get the 410cc kit.I'm tempted to get the 500cc kit { mapable ECU required for this kit} but i'm thinking it might be asking too much of the engine.I would value your opinion on this.Love your videos.Hitchkocks should at the very least offer you their products for free.Your cam video is clear and precise.Hitchkocks video on cam instalation is as clear as mud.Keep up the good work and keep the great videos coming.Much appreciated.

[@tigerness5555]

Hi Alan It’s great to hear that you enjoyed my video and hopefully have found it useful. I’ve been looking at the big bore kit as well, definitely looks interesting. The 410 should be perfect for the bike but if you’re going to go this far then the 500 is tempting. My bike is still restricted due to the ECU, I have tried the RLT00187 but it’s not compatible with the Classic 350. It’s a very strong and reliable engine so it should be able to take the power increase ok. I’m on the fence with this one and waiting to see how it works out with other owners, plus I really don’t tend to ride my bike hard very much, I use my bigger bikes for that. Sounds like you’re building a fantastic fleet of J series Enfield’s, all the best TN

[@hctim96]

With all the mods would you fail the MOT? Im in the states 🇺🇸 so I don't know of these thing. Great vid btw. Very clear information and Sir you have a very neat and clean garage!!

[@tigerness5555]

Great to hear that you enjoyed my video 👍 As they don’t do motorcycle exhaust emission testing in the UK MOT at the present time, I think it should be ok. If there was an issue I would simply put the cat back on for the test 🤣 Thanks, I love my garage 👍

[@morrisminor56]

Ok then, looks like it works a treat. fitted the decat to my bike a while back, I like the sound of the standard exhaust, but now I can hear it better on the run. R E did well to keep the standard exhaust quite small.

[@tigerness5555]

Great to hear that you enjoyed my video 👍

[@ericmehl904]

Un bonjour à vous depuis la France… J’ai une question… À combien de KM avez vous changé votre nouveau arbre à cames ??? Car je possède une RE classic Sand avec 1300 km , Et que j’ai mon nouveau arbre à cames de chez Hitchkock qui attend que je le monte sur ma moto… Bien à vous !

[@tigerness5555]

From memory I think my bike had covered around 5,000 miles when I installed the camshaft. It’s now done almost 10,000 trouble free miles (apart from a faulty speedometer that is). If I was you I would wait until the engine is fully run in and a bit more, say around 3,000 Km. That way you get to experience the bike properly before installing the camshaft. Hope this helps and enjoy your bike 😁👍

[@BobfmBali]

Please share the link for the online workshop manual. I'm looking at doing the camshaft conversion along with changing the front and rear sprockets.

[@tigerness5555]

Hope you enjoyed my video and found it useful. I’ve just put a link to a service manual in the video description. This is the same link: drive.google.com/file/d/1W1423jB25CfLSj88eQSwQJFw5m0k95nI/view

[@philpeacock7803]

Nicely done. Glad the upgrades made you smile. I've done decat and air filter mod, just the cam shaft to go lol. Then I will be smiling as big as you. Great video. Keep up the good work

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍

[@philpeacock7803]

Well Ian, I've took the plunge. Just ordered all the kit needed to upgrade the camshaft from Hitchcocks today. Thanks again for best video on fitting upgrading camshaft.

[@jackmcswigin3991]

@@philpeacock7803much sound difference with the decat?

[@philpeacock7803]

@jackmcswigin3991 yes I think so, still had standard can on but ended going for the free flow, it sounds great.

[@jackmcswigin3991]

@@philpeacock7803 cheers, my decat is coming tomorrow so shall see then anyway 👍

[@michaelpearshouse1100]

Some riders might think replacing the cam is a little beyond their diy expertise but could confidently manage the decat pipe and air filter mod. Would these be a worthwhile improvement, do you think?

[@tigerness5555]

Yes the decat pipe and filter will give some improvement. That’s what’s so special about these bikes, completely standard they’re great and they are so easy to tinker with. Hope you enjoyed the video 👍

[@iaincurrie1688]

Hi, is there any change to the bikes fuel consumption or is it too early to say. Any cost changes to your insurance with these mods.

[@tigerness5555]

There may be a slight increase in petrol consumption, I’ve never checked. The bike is so frugal it isn’t an issue. As to the insurance there was no increase as I haven’t told them 🤣 Hope you enjoyed my video 👍

[@buttercupbloke]

Just received my cam and looking forward to fitting it using your excellent install video as a guide. Can I ask why you decided to remove the fuel X lite from the bike?

[@tigerness5555]

Great to hear that you enjoyed my video and hopefully found it helpful 👍 I sold it along with the Hitchcocks free flow exhaust system which I didn’t like due to the loud noise. I wish I had held onto it now to see what difference it might have made with my current setup.

[@ras23ras23]

I also wonder why you don’t use FuelX anymore…

[@JohnSmith-xw5qe]

An excellent put together video tiger glad it all worked out well the bike looks terrific & sounds healthy too👍🏻

[@tigerness5555]

Great to hear that you enjoyed the video, hopefully you found it helpful 👍

[@mkdave1955]

The stock bike makes 15 brake horsepower and Hitchcox report 20 brake horsepower with the modifications. So if we take 20÷15 it gives us 1.33. So with the modifications, isn’t the modified engine making 33% more peak power, or do I need to go back to elementary school? Thank you for the video it was very interesting. It would also be interesting to learn if any of this has seriously affected the fuel consumption, which of course is outstanding for the stock bike. Best regards, David.

[@tigerness5555]

Great to hear that you enjoyed my video and found it interesting 👍 I think your calculations are spot on. Riding the bike there is a definite increase in power which feels exactly like the Hitchcocks power curve. As for petrol consumption, if anyone is really that concerned, then they will probably never use the higher rev range anyway 🤣

[@PhilipBallGarry]

​@@tigerness5555 I never really venture into the higher rev area of mine - preferring to pootle about short-shifting. It's just the way I ride these days. It'd be nice if Kent Cams offered a version which improves low end torque instead 🤔

[@holypai]

​@@PhilipBallGarryi had hunter 350 which share the same engine. like to short shifted. already at fifth gear @60kmph. i had zard exhaust installed and it sounds more dug dug

[@deena555balu5]

Please suggest Classic reborn 350 modification

[@tigerness5555]

Check out the videos on my channel you’ll find plenty of options there 👍

[@kevin-kayehodges9506]

I bought the fuel-x for my bike. I have heard that it does nothing for performance but actually just smooths the engine out more. I think I would say that it made it more lethargic. I took it off. The performance gains I get with a modified K&N filter and cover along with the de-cat pipe are very noticeable. I am surely going to get the cam as soon as they are back in stock at Hitchcocks. Thanks for the info.

[@tigerness5555]

Hi Kevin, great to hear that you enjoyed my video and found it useful 👍 Thanks for your comments, very interesting and relevant.

[@kevindarkstar]

I fitted the fuel X lite on my meteor along with the de-cat exhaust system and the dna performance air filter and cover, the fuel X just makes the mixture a little bit richer, as these euro 5 bikes are incredible lean in stock form, I certainly don't find my bike lethargic

[@paulfoster5432]

After seeing your video, I'm definitely thinking of getting a Cam fitted for my Hunter 350 When I can afford it, Being a Yorkshireman, We're a bit careful with our money like Scotsmen LOL 😅 But seriously, have you thought about fitting a Fuel X Lite on your Royal Enfield Classic, As it helps lean burn engine's run cooler, and prelongs the engine and engine Oil 👍 As I have put them on both my Interceptor and Hunter, As both have DNA Air Filters and After market Silencer's, But I've only done 12 minutes on tick over, So after seeing your video, I'm going to be doing them both for 30 minutes each now 👍 Thank you very much for that, Great channel Cheers Paul Foster 👍

[@tigerness5555]

Hi Paul, great to hear that you’re enjoying my videos and finding them helpful 👍 I actually do have a FuelX Lite on my bike, not sure if it makes much difference, but better safe than sorry 🤣

[@paulfoster5432]

@@tigerness5555 I've since ran my Hunter for 30 minutes, To do the Check , I'll be doing it for my Interceptor, Thanks again, When I've saved up the money, I'll be getting a Hitchcocks cam for my Hunter 👍 Cheers Paul 👍

[@ravikumar-tb1gy]

marvelous bike colour is vibrant ,, brillient

[@tigerness5555]

Glad to hear you enjoyed it 👍

[@MrBuddha71]

Hello, I am a new subscriber. Thank you for your great videos and the SM link! Could you let me know what service you have the Classic 350 on in this video please? Thanks again.

[@tigerness5555]

Hi Mr Buddha, thank you for subscribing to my channel, and great to hear that you enjoyed this video. I’m not really sure what you mean by what service I have on the classic 350. But at the time of fitting the camshaft my bike had covered around 6000 miles and has been serviced as per the manufacturer recommendations up to that point. My bike has now covered almost 10,000 miles and has been trouble free.

[@MrBuddha71]

@@tigerness5555 My apologies...I meant what service stand. However, I figured out it is an Abba by pausing the video. Thanks for your reply.

[@romulonumfoith]

Muito bom. Meus parabéns, essa árvore de comando está à venda?

[@tigerness5555]

Great to hear that you enjoyed the video and hopefully found it helpful 👍

[@Giorgio_Caniglia]

Really really great video, do these improvements allows the bike to overcome the 70mph or 115 km/h? And what Is It the Felix light?

[@tigerness5555]

Great to hear that you enjoyed my video and hopefully found it helpful👍 Unfortunately these are improvements do not allow the bike to overcome the 70 mph speed limit, this is still restricted by the ECU/throttle body. Details of the FuelX Lite be seen at this link: accessories.hitchcocksmotorcycles.com/47038?cont_page=Royal-Enfield-350-Classic-Accessories

[@Giorgio_Caniglia]

​@@tigerness5555thank you!!! If you find a way to overcome and delete the restriction of the ECU and the throttle body please let me know!

[@frankmarkovcijr5459]

Half of the price of the bike is for pollution controls. Motorcycles should not have expensive crap on them. If it was a 500 you would not have to do this. My vintage British motorcycles are free from all the crap on modern motorcycles. My BSA C-15 250 singles make 25 HP and are 100 lbs lighter. Maintain them properly and they are reliable and dependable transportation. They are the real thing. These bikes are like margerine pretending to be butter.

[@tigerness5555]

Unfortunately you can’t buy a new BSA C15 these days.

[@frankmarkovcijr5459]

@@tigerness5555 You can always buy one with low mileage. My last one had only 6,000 original miles. I have 2 street versions and 2 dirt versions. One is the one that the Triumph guys called a Triumph Turd because it was a BSA with Triumph on the engine and gas tank. Does 60 mph down dirt roads. The guys with their water cooled wonders and the HP they made. I said fine I 'll wave at you as the paramedics peel you off a 🌲 tree.

[@deena555balu5]

Why not use DNA filter?

[@tigerness5555]

I didn’t fit the DNA filter as I didn’t think it was necessary, I’m very happy with the set up I have 😁 Hope you enjoyed the video 👍

[@abinsaju6852]

Engine complaint??

[@tigerness5555]

No complaints from my engine, it sings along very happily thank you 🤣 Hope you enjoyed the video 👍

[@goatman3828]

Late to the vid here. Curious what your real world before and after milage is.

[@tigerness5555]

No real idea what my before mileage was, but on my recent tour of “The Wild Atlantic Way”, 1,600 miles it averaged over 95 mpg. Pretty impressive in my opinion, this was sitting between 50 and 60 mph most of the time. My bike is performing very well, it’s probably done around 4,000 to 5,000 miles since the camshaft was fitted. Trouble fee 😁👍

[@goatman3828]

@tigerness5555 Wow, didn't think I would get a reply! Thank you. How the heck can those small engines do that on a bike, but suck gas like crazy in a lawnmower? Trying to get my nephew to buy one of those RE 350 bikes. He currently runs around on a Honda Cub 90cc. Wants something that can do 99% back/main roads, 1% highway. Think these, or a 411cc would be perfect. Easy to work on and parts are not Honda pricing.

[@yeehar99]

Ha! This channel popped up in my "suggesteds" 5 minutes ago so I skipped through the camshaft video and then this one. If only I had a Dollar for recognising Scottish roads within seconds of dropping into a video (in this case, entrance @ 12:04) ... Great looking work. Subscribed.

[@tigerness5555]

Great to hear that you enjoyed my video and welcome to the channel 👍 If only I had a Dollar 💵 for every time I’ve ridden on that road 🤣

[@MauriceTarantulas]

Saw coastrider Scotlands vid t'other day bike looked as though was running better. Want one for my Himmy! (My 2nd gear seems off at low speeds...other than 3rd is non existant pretty much 4th and 5th fine)

[@tigerness5555]

Yes the camshaft has made a big improvement in power on the Classic 350. Great wee bikes 👍😁

[@transalpinist-motorradtouren]

Nice bike, nice modification, very good video. Thx for that. I like that bike very much. Maybe I have to sold one of my old Hondas and buy an Enfield ... :)

[@tigerness5555]

Great to hear that you enjoyed my video and hopefully found it helpful 👍

[@vaibhavverma2960]

What are those clutch and brake levers

[@tigerness5555]

They’re adjustable levers I purchased from Hitchcocks, see link below. I think they’re excellent and give much better feeling and control. Hope this helps 👍 accessories.hitchcocksmotorcycles.com/45176?cont_page=information-and-services/Royal-Enfield-350-Classic-Accessories

[@vaibhavverma2960]

@@tigerness5555 thanks boss

[@alank.2245]

I’ve enjoyed your videos on this process - very thorough! It would have been nice had RE made the Classic 500 instead of the 350 to avoid all of these mods. Like you I did many of the performance upgrades except the cam and still found it to be under powered for USA traffic speeds and needs so I traded mine in on a near mint 2002 Triumph America with 25k miles and I love it. Thx again for your time and effort! Alan - NE Ohio USA.

[@tigerness5555]

Hi Alan Great to hear that you enjoyed my videos. Sorry that you’ve sold your Royal Enfield but fully understand the reason. I’m lucky having three bikes and use the bigger bikes for longer and faster runs. The Triumph America is a fabulous bike, very similar to my 2010 Bonneville. Enjoy your new bike 🏍️👍

[@sharadsharma3617]

Nice informative video, kindly guide if i want to buy it in INDIA for my Meteor 350 2021 model and how much cost for set of 3 performing parts. thank in advance. Namastey from INDIA

[@tigerness5555]

Great to hear that you enjoyed my video and hopefully found it helpful 👍 All parts are available from Hitchcocks in the UK accessories.hitchcocksmotorcycles.com/48439?cont_page=information-and-services/Royal-Enfield-350-Classic-Accessories&keyword=Camshaft

[@stevegresty4181]

Fantastic video Ian, I'd be interested to see the colour of the spark plug after a few hundred miles or so. I have the DNA filter & plate fitted but I personally think it's running lean after checking the plug recently.

[@tigerness5555]

Great to hear that you enjoyed my video and hope you found it useful 👍 I’ve had the spark plug out a few times to check since fitting the camshaft, all good so far 🤞

[@oldfella4096]

Very interesting TN your clearly impressed with the modifications my only thoughts are about the longevity of the engine with no air filter??? That was a canny wee road you were testing out the Enfield on and when is the merchandise coming?😏

[@tigerness5555]

Hi again Old Fella, Great to hear that you enjoyed my video. I think you should watch the video again, it has a brand new standard air filter fitted 👍 This is purely a hobby channel, I make no money from it, so sorry to disappoint there won’t be any merchandise 🤣. The Dunning Glen road 🏍️👍

[@KAZEKAgu]

What about bike mileage

[@tigerness5555]

Not sure what you mean? The miles per gallon is probably slightly less now, but still very good in comparison to most other bikes. Hope you enjoyed the video and hopefully found it helpful 👍

[@KAZEKAgu]

I mean what mileage does it give by 1 litre petrol after you change the pipe.

[@tigerness5555]

I have no idea of before or after figures, I just fill the tank and ride the bike. It definitely has a massively higher miles per gallon figure than my other bikes have 🤣

[@paulclaassen926]

Your sheer delight at riding your modified motorcycle comes through loud and clear. It's never too late to have a happy childhood, especially if you're doing it on two wheels. Cheers!

[@tigerness5555]

Cheers Paul, glad you enjoyed the video 👍

[@denlsgoulden2307]

If worried about dropping the camshaft sprocket retaining bolts down the camchain tunnel, might be a good idea to stuff a clean rag between shaft end and cylinder head casting to prevent anything falling down there, remove and reapply it as necessary 😊👍

[@tigerness5555]

I was very careful not to allow any of the bolts to fall into the engine. My comments during the video were purely to draw viewers attention to the possible risks. Yes stuffing cloths down the shaft is a good idea for those less proficient. Hope you enjoyed the video and found it helpful 👍

[@stefanmaslaczyk1259]

What fabulous roads you’ve got to ride on. Looks like that little Royal Enfield is just perfect for enjoying them on.

[@tigerness5555]

Yes I’m very lucky living where i do, plenty of great riding roads close by. Hope you enjoyed the video 👍

[@TheBggillies]

Nicely done! Your videos with the multiple video angles surely contributed to the clarity of the procedure. Please tell me, did you notice a difference in fuel consumption?

[@tigerness5555]

Great to hear that you enjoyed the video 👍 To be honest I don’t check on my fuel consumption on any of my bikes. It’s probably not quite as good as the standard bike but it’s still amazingly frugal. Well worth sacrificing a little bit of extra petrol for the performance gains in my opinion.

[@MichaelWilliams-jc2ui]

Great video. I’d heard that the bike is limited on the ecu to 70mph, have you found this to be the case or have you seen an improvement in that as well?

[@tigerness5555]

Great to hear that you enjoyed my video 👍 The Classic 350 Reborn and the Meteor 350 both have top speed limiters, they cannot go above 75 mph. The camshaft definitely improves the acceleration and top end power, but it can’t make the top speed gonany faster. The Hunter on the other hand is not speed limited. I’ve spoken to a Hunter rider who has the camshaft fitted and his bike has done 87mph.

[@MsDenver2]

I think I would want to see if the mods put more strain on other engine parts also I would contact Enfield to check if any harm may be done?

[@tigerness5555]

I’m pretty sure Royal Enfield will not recommend any modifications that are not standard R.E. parts. As is the case with every manufacturer.

[@Pher1954]

I'm definitely doing this to my Meteor. Could you do an MPG test running at normal speeds.

[@tigerness5555]

Great to hear that you enjoyed my video and found it useful 👍 This bike is so frugal on petrol, I don’t imagine it uses much more.

[@chromaticAberration]

Brilliant! Maybe I should try the same procedure on my Interceptor!

[@tigerness5555]

Great to hear that you enjoyed my video and thank you for your supportive comments 👍