This video we have made for educational purpose. We may be wrong. One can make own decision for repairing. We are not responsible for any damage or risk. Thanks and stay connected.
Пікірлер: 74
@ferozahamed77416 жыл бұрын
Hello ! Great video I am facing similar issue with front drain bolt 12mm. Last time when I changed engine oil I noticed few threads came along with drain bolt. When I tightened it was tightening to certain extent . I believe the next time if I unscrew definitely I will not be able to screw back. Instead of draining from this screw can I open the main drain bolt and run engine for 15 secs so that crank case oil gets drained. please advice whether I can start the engine and drain the oil or need to do coiling work As you did, also can I use vacum cleaner to remove metal residue. Thanks in Advance.
@MechAutoClinic6 жыл бұрын
never open front drain plug since it is direct opening of crank chamber. even if there is oil left while oil change interval nothing will happen to engine. now since you have a damage thread so just do the re-threading but careful with the burr. even if u try to flush the engine it won't work fast. vacuum cleaner won't work. just put ample grease on TAP burr will stick to it...don't worry but next time don't open that bolt. . i hope this will help you
@ferozahamed77416 жыл бұрын
Thank you 😊 Are we not supposed to open the front bolt anytime ?
@ferozahamed77416 жыл бұрын
Can u please post a video on how to drain engine oil and refill
@MechAutoClinic6 жыл бұрын
it was done but the video got damaged....will do it again very soon...busy in my workshop with other bikes...so give me some time. thanks for suggestion though.
@MechAutoClinic6 жыл бұрын
only if you are dismantling the engine. otherwise in oil change intervals you don't need. since it is the main crank chamber. the oil has to be there every time when you start the engine. if no oil then big end pin damage. new oil takes time to go there. so better to keep old oil which will get mixed up with new in engine roll. so generally open only rear main drain plug and strainer.
@zakkpaulSPM6 жыл бұрын
U r the best. every video u have upload are all excellent. But remember im still waiting ur procedure of installing 6 to 7 plate on 350 cc
@MechAutoClinic6 жыл бұрын
yep yep...i do remember..jaise he gadi ayega....u r gonna see that conversion....I work only on Harley's so now a days Bullet is difficult for me...mostly Harley visitors...but still I will try to do it fast for all of u..thanks.
@rajanikanthss6 жыл бұрын
Fantabulous video only experienced can do this ...
@MechAutoClinic6 жыл бұрын
you are welcome and thanks for watching.
@drsrz38606 жыл бұрын
Nice work I kept my bull in shed and said to take rest for one month
@MechAutoClinic6 жыл бұрын
you are welcome.
@nikhilmine6 жыл бұрын
Detailed video. Thanks mate
@MechAutoClinic6 жыл бұрын
welcome
@ZoroastrianCowboy2 жыл бұрын
Where can I order a kit of those tools to fix the drain plug threads on my Classic 500? I live in the USA
@MechAutoClinic2 жыл бұрын
Home Depot or Amazon. It's available. If they don't have size then I can send from India. Thanks.
@anthonyfernandes80012 жыл бұрын
Try this link by Autozone : www.autozone.com/test-scan-and-specialty-tools/thread-repair
@bikashsubba60503 жыл бұрын
Hello! I have damaged plug hole of desert storm 500 by over tightening it. Now it comes out on its own. I am facing the worst situation now. Please suggest and help.
@rahulr79272 жыл бұрын
I guess even the other drain cover threads are damaged..the one which holds the oil pickup filter.
@rasheshjinwala48814 жыл бұрын
Good explanation but I have some suggestions for better results... * Join air connection from air breathing pipe and tap with grease, continue air flow from oil sump to oil drain hole will never allow burr entry inside of oil sump cavity. You didn't discuss OR explain about tap thread size and heli coil specifications (Business monopoly ?), Heli coil driving tang can break by twisting with nose plier and can be taken out with nose plier. Anyway, It is costly but one-time life long solution. Procurement of tool set is useful for mechanic but not for bike user (as it is one time job for customer).
@MechAutoClinic4 жыл бұрын
i would have not posted if i wanted to make monopoly. every bike has different thread. some can buy the tool some cant. some cant do the job some can. depends on individual. there is a possibility he can suggest his machinist to this job to avoid damages if done just by seeing video. The video i made for suggesting purpose. not for monopoly purpose. the suggestion of buying tool is good for those people who are having better prosperity. thanks for watching video and comment sir.
@rasheshjinwala48814 жыл бұрын
@@MechAutoClinic Sorry sir, You hurted by my comment but my intension was fair...
@puladashannahson4 жыл бұрын
When i was removing my RH cover one bolt came with more than half of the threads , I managed with anabond some how no leakage yet , but want to fix that ; is this the same way we can do sir ...?
@MechAutoClinic4 жыл бұрын
yes surely u can do this. it is made for such job only. it will be perfect. dont worry
@johnroyte42136 жыл бұрын
Very interesting tools... I like to have one... What the name of it... And where can I get it??
@MechAutoClinic6 жыл бұрын
8007815854 call up on this number he is my importer...deal directly...morrow you can talk to him 10am to 5pm...
@rasheshjinwala48814 жыл бұрын
It is Heli coil... It should order with it's threading tap and holder... As per me it is one time job and this set is costlier. For mechanics, it is OK but for bike user it is dead investment. You can order it from online platform... This guy didn't give us a tap size and specification of heli coil...(Wast range of heli coils are available in market,first we have to select heli coil according to plug threads and according to heli coil outer threads, selection of tool holder is possible).
@MadhanKumar-wz9cb4 жыл бұрын
What's the size of drain bold? Which tapping size I should use? Is that m14 1.25 bolt? For time being I can use some other bolt please suggest me. Thanks
@JV-ri2iy5 жыл бұрын
I broke something called tension assembly on my bullet that's what the name the guys at the showroom told me its leaking a lot of oil and I would like to know how to change it
@MechAutoClinic5 жыл бұрын
primary chain tensioner. generally it never breaks...
@debasisdutt6 жыл бұрын
To clean the Burr, take a Johnson Bud with grease in it's tip and clean the thread inside.
@God-is-love-2 жыл бұрын
Bhai 100 rupees main aaj hi local kharadiya se karaaya with new bolt 15 no.
@MechAutoClinic Жыл бұрын
very good
@JITENDERRAOSAHAB6 жыл бұрын
but sir tha fliings that get inside that will create any damage to engine or not plz tell and how would that came out
@MechAutoClinic6 жыл бұрын
video main dikhaya hain na...grease lagao tap ko ..burr andar nahi rahegi...agar rahi bhi toh gadi ko sidha karke flush kar dijiye sab burr bahar ati hain.
@ahammedafsalnnasumudeen27155 жыл бұрын
Cheap quality engine casing thread for Royal Enfield uce engines
@rasheshjinwala48814 жыл бұрын
Engine body is of Aluminium alloy... If you fix plug with torque wrench, it never spoil... But if you over tight the plug, aluminium threads will definitely get stripe. It is mistake from our side, not from RE factory...
@prashanthdevadiga90463 жыл бұрын
Nice sir can we buy that kit???
@ravndrareddy4 жыл бұрын
What size tap shall we do over sized or same size my bike classic 350 same problem
@MechAutoClinic4 жыл бұрын
its a odd ball size which comes only with the kit.thanks for watching video and comment
@nitinshinde34714 жыл бұрын
Sir can you tell us tap size
@MechAutoClinic4 жыл бұрын
its comes in a kit which has odd ball size. not available separate.
@sonykhan11965 жыл бұрын
sar g new model satndrad bullet ka speed miter purane wale me instal ho sakta hai ya nahi
@MechAutoClinic5 жыл бұрын
ha
@sonykhan11965 жыл бұрын
thenk you sar .sar ek video old standrad 350 k farant shoker oil seal chenge karne kee or chan set kee bhi bano kyou kee shoker kholne mushkil hai purane model k
@hanishkumar30214 жыл бұрын
metal engine main chla jata hi,thred ka
@pankajjadhav51436 жыл бұрын
Sirr which tap and helicoil used..
@MechAutoClinic6 жыл бұрын
you can talk to Mr.Sumit on 8007815854...he supplies all things to me.
@pankajjadhav51436 жыл бұрын
Mech Auto Clinic ok
@akishan985 жыл бұрын
Where can I get this done in Kolkata ?
@MechAutoClinic5 жыл бұрын
you can talk to 7407596835 Debasis Ghorai...check with him...
@sushilkumar-jk5fk4 жыл бұрын
My oil tharad is brok
@donbjohn5 жыл бұрын
can i get this kit in kerala?(sleeve and the whole set)
@rasheshjinwala48814 жыл бұрын
Heli coils and tool holder with tap is available ON LINE... Please search on Google for Heli coil, select coil size and according to size, check On line for availability.
@jyotiranjanmohanty71386 жыл бұрын
Sir I have shown this to my regular mechanic he says the tool will be available only with service centre
@MechAutoClinic6 жыл бұрын
well Service center don't even know this...anyways...this much i can help you.
@jyotiranjanmohanty71386 жыл бұрын
Mech Auto Clinic thanks sir I will try to get it fixed by your video I will vist other mechanic near me let's hope some one will do it. Sir thanks again for your effort I'm very thankful.
@MechAutoClinic6 жыл бұрын
always welcome....don't go to mechanic. Go to "machinist".
@jyotiranjanmohanty71386 жыл бұрын
Mech Auto Clinic right sir👍
@MechAutoClinic6 жыл бұрын
where u from?
@anilsahu18432 жыл бұрын
Third class engineering in whole royal enfield bikes😒
@MechAutoClinic Жыл бұрын
well in every auto mobile there is some or the other problem. so cant help it...
@binodsaikia96924 жыл бұрын
whats the size of the tap ? i'm facing the change issue , please suggest