Royal Kludge G68 | Unboxing | Typing Sounds | Gasket Mod | Maximum Thoccs

[@reginaldcruz530]

*Thanks again Pusakamkb for modding my keeb!* I got mindblown by what you did! Been typing for 24 hours now non-stop hahaha ! Congrats on the 1k! More lasons to come! 😁

[@pusakalmkb]

Thanks for letting me borrow mahboi! Sorry it took me some time to finish!

[@reginaldcruz530]

@@pusakalmkb the wait was all worth it :D

[@andreaemperador3448]

link for keycaps pls? 😊

[@pusakalmkb]

@@andreaemperador3448 www.lazada.com.ph/products/150-keysset-plastic-theme-pbt-dye-subbed-key-caps-for-mx-switch-mechanical-keyboard-xda-profile-keycap-for-68-84-96-980m-i1837371636-s7819251062.html?spm=a2o4l.searchlist.list.1.653f6aadsYxuTr&search=1&freeshipping=1

[@bwatroce]

how much did it cost you?

[@ericqhochuli6004]

This is a great video, I love how careful and precise you are with the mods. Modding is my favorite part of this hobby. I will be sure to watch in the future for more tutorials like this one.

[@pusakalmkb]

Thanks for appreciating mahboi!

[@shassan5287]

Great to see the long form videos!

[@pusakalmkb]

More to come!

[@CaviteTechnology]

ze sound is *chefs kiss* great vid as always!!

[@MrML4L]

I'm so far down the hole right now but i love it!!!!! Also the first mods I did to my RK68 plus im in love with. These reds lubed are legit kinda nice.

[@kushalroy8457]

I recently bought this keyboard with Gateron brown switches in it and this is really one of the best budget keyboards there is. Will mod mine very soon.

[@iogutierrez3600]

SO HAPPY FOR YOUUUUU! MORE SUBS AND TIPS TO COME!!! LETS GO PUSACAAAAAAATSSS

[@muhdnasrulafiq]

I did almost the exact same "gasket" mod, but for RK84. I use Zip-N-Fit liner instead of felt for the case foam, 4mm neoprene foam with double sided adhesive for the gasket/pcb-to-plate foam, not a single screw used and it holds the keyboard pretty well. Using lubed Akko CS Lavender Purples with Akko Neon ASA keycaps and I'm loving the clacky and thocky sound profile it creates. RK makes some banger board!

[@pusakalmkb]

Absolutely man! The cases got good potentials for modding too!

[@Anggoi]

Do you have any connection issue with the 2.4ghz dongle?

[@achannel6677]

@@Anggoi ig everyone has. G68 has improved 2.4ghz connection

[@jojohan9049]

Do you have a sound test?

[@JoshuaCelisMedia]

Might as well do this!

[@Boredealis]

Congrats on 1k subs my man! Hope you keep it up!

[@tommytypes1721]

I though I was the only one that did that. I never wanted to tell anyone I did because I though I were going to be judged. Glad im not the only one doing it. :D (Removing Plate from PCB like that.

[@pusakalmkb]

Hahahahahahahahahahahahaha fok them judgers! you do you!

[@user-yo9cu6yf7o]

same

[@funkyskill1961]

This keyboard sounds and looks really nice.. And even though one can't even see the mods after the case is closed you applied them with such precision (I probably wouldn't have the patience haha). I was just wondering though, did you srew the board in afterwards or did you leave the screws for the stand-offs out?

[@pusakalmkb]

Thank you for appreciating! My job have taught me overwhelming patience. I’m a craftsman and a multimedia designer so that sums all up. There are no screws mahboi i did not put back the screws for the pcb to plate too. It’s a bakeneko-inspired build.

[@khanknutd2718]

ayy, im here, thanks for the gasket mod on this board since im going to do the same thing

[@khanknutd2718]

just curious, what the tape mod do ?:D

[@pusakalmkb]

go ahead mahboi!

[@zoppity6135]

@@khanknutd2718 makes it sound thockier

[@pusakalmkb]

@@zoppity6135 i edged once or twice while typing 😳

[@rossthecreator6961]

SOBRANG SOLID!

[@muhamadrizal4]

thanks for the tutorial

[@rumpy3025]

Congrats on 1K! The sub count has been growing fast these past days. Keep it up

[@pusakalmkb]

Yeah and I’m really thankful for it. But also wondering where dz people came from. Thanks for watching mahboi!

[@rumpy3025]

@@pusakalmkb I came from the barebones rk68 video i think, i forgot the name.

[@pusakalmkb]

@@rumpy3025 ohh the aws! Have you joined the discord already?

[@rumpy3025]

@@pusakalmkb Wait there is a discord? Didnt know, ill join

[@diostaylow]

That spacebar though

[@DanielBerthellemy]

How to make this board POP: 1) Top PE foam PCB mod. 2) Bottom Paper Tape Mod x3 Layers. 3) Case Fill with Polyester (Medium amount). 4) Plate Foam Taped across. Optional Steps for Massive THOCC: 1) Swap switches to Gateron Yellow (Any) or Gateron Oil King (Recommendeed). 2) Change Keycaps to either a SA or MA profile keycaps (PBT!).

[@idfkjude]

What's the difference of eva foam to polyfill for case foam sound wise?

[@DanielBerthellemy]

@@idfkjude sound isolation quality

[@idfkjude]

@@DanielBerthellemy I've only tried the eva foam case I haven't tried the polyfill one

[@CEngi]

It turns out the stock frame actually pushes down the plate and makes it stiffer. Less flex. Also changes the sound to a bad one imo. Someone did a mod on the plate on fb group where they trimmed off the part of the frame that pushes the plate and it's way better!

[@pusakalmkb]

yeah the stock one sounds flimsy, that's why we used the 3d printed one, and lesser flex on tactiles is better :)

[@danielranleesoria9609]

By any chance, will the burger mount you used for the Rakk Lam Ang Lite work on the rkg68?

[@richardtrajano6592]

sarap ng tunog

[@lamimlodi8026]

Can you use masking tape instead of felt for the case modding?

[@logicreason2117]

Nice vid new subs here!!!

[@pusakalmkb]

Thnaks man!

[@logicreason2117]

@@pusakalmkb lods nag seservice po ba kau ng mods?

[@pusakalmkb]

@@logicreason2117 Sorry lods di po eh :( Just a content creator

[@TechManG]

Awesome video! Where can I find similar foam for the gasket mount mod? I tried searching for the model you used, but couldn't find it :(

[@pusakalmkb]

Just buy a 3.5-4mm eva foam and turn it to strips. Much better if you find something with adhesive.

[@saiah9145]

Where did you buy the anti-collision foam tape?

[@SabrE_XVII]

Did you use the feker cream switches?

[@Smokeye147]

Hi, Is felt lining necessary?

[@imca-ica-49shahtatvavishal83]

What's your review while using it in Macbook??plz reply me

[@xGunMoll]

Did covering the battery with felt cause any overheating/fire? Cause some other YTers who has covered it with felt/dampening material said that theirs almost caught on fire due to covering it

[@pusakalmkb]

I haven't checked but I think it's fine.

[@kkim564]

pusakalmkb trying to decide if I should get this. Can you let us know what the top plate material is? Thanks!

[@TrongNguyen-ue9ro]

Can you give me the size of the top cover so I can print it myself?

[@MrMBonin]

Do you have an stl for the 3d Print?

[@vincejet]

cool video! Would you know if there's a 75% / 70% version of this board? Is the RK84 / RK71 hotswappable as well?

[@chriskeeb]

The RK84 is hotswappable and has bluetooth/wireless + removeable frame.

[@vincejet]

@@chriskeeb thanks!!

[@ch1lling143]

What polling rate does this keyboard has

[@nomnomnomeimaroii9057]

where can i get the clear top keyboard case like that 😔

[@somewhatideal]

Won't the cloth tape be a potential fire hazard?

[@leinad7776]

When should one replace the tape used for tape mod? I have read that in time the adhesive will melt.

[@pusakalmkb]

Haven't tried changing it tho, but it must still be easy to change if you find a difference in sound.

[@danielsullano8621]

Which tape do you think is better? gaffer or painter tape? If both which do you think is better on the exposed side?

[@pusakalmkb]

If you aim for a deeper tone you need a thicker tape. Actually you can use painters/masking/washi tapes with multiple layers but that’s time consuming and a bit messy. I preferred 1 layer of gaff tape to make it look clean

[@danielsullano8621]

@@pusakalmkb Thanks! That's actually what I'm aiming for. Great video btw. Keep doing what you do best!

[@CEngi]

If I tape the back of the pcb like that, will the leds not overheat? or cause any other issues?

[@pusakalmkb]

No bro since it’s not conducting electrical current

[@jos_lle]

nice keycaps!

[@pusakalmkb]

thank you!

[@kevingrullon2796]

This video is dumb good btw do you think the kbd fans 65 case can work with this

[@yodaa9086]

What about the o ring

[@bun3108]

where can i buy the translucent

[@melh1954]

hi where do you get the translucent 3d printed frame?

[@pusakalmkb]

from PMX.GG facebook

[@kirk776]

Can you please mod the keychron c2?

[@RochTheReaper]

Hi! I'm planning to mod my RKG68 however I'm wondering if there's a difference between a lubed/clipped/modded stock stabilizer vs a lubed/clipped/modded Everglide/Durock stabilizer?

[@pusakalmkb]

actually you can achieve a good sounding stabilizer with a stock one they are the same with the same parts. They differ in the smoothness in material, the fitting of the housing on the plate. If you can mod a stock one it will still give you the same result.

[@RochTheReaper]

​@@pusakalmkb Thank you so much for answering! Now I can sleep with that good answer! Subbed your channel and liked this video as well as this is on my playlist as one of my go-to guides once I begin modding my RKG68! God bless!

[@cutandrun5965]

Love everything, xcept the intro music, maybe turn it down a little to balance it. Lol tulog yung aso ko tas nagulat hirap uli patulugin.

[@pusakalmkb]

Haha sorry about that. Pusa: 1 Dog: 0

[@justinlau1918]

tape mod using this tape is kinda brave hahahahaha

[@pusakalmkb]

haha, it's not duct tape btw just a cloth tape not too strong adhesive

[@deareargasm408]

My dream keycaps 😭🙏

[@reimon5410]

5:25 is removing the pcb without removing the switches a crucial part? Can i just do it the old fashioned way and remove the switches one by one

[@pepepls3651]

He's comfortable that way but removing the switches beforehand is safer

[@sahilmistry5883]

what swithches did those come with because mine doesnt sound that good stock lmao

[@pusakalmkb]

RK Reds IIRC

[@clrk.m]

This or the TM680? Which sounds better and which has better quality?

[@pusakalmkb]

hmmmm maybe I'd choose the tom680 because of the poron plate foam at stock

[@iov-art]

Can you use the keyboard wired and wireless at same time? For example, wired connected to PC and bluetooth to laptop? Or Bluetooth and 2.4Ghz Wireless? Thanks!

[@pusakalmkb]

hmmmmm maybeeeee, can you enlightn me on what purpose would that be useful?

[@iov-art]

@@pusakalmkb Well, logitech mx keys has a usb wireless dongle and bluetooth like this keyboard, but after you pair devices you just have to press a key and switches between PC and laptop, even there are two types of connections. With this keyboard it looks like I have to use the switch underneath keyboard and wait for bluetooth connection, afterwards I can switch only between bluetooth devices. And I think if it is wired and I also switch to bluetooth, it can't be used in wired mode anymore, just bluetooth. I would like to know if it has same options like logitech mx keys for switching between macbook witch is bluetooth mode and PC witch is in wired or 2.4GHz wireless mode.

[@pusakalmkb]

@@iov-art Ohh i see, but i guess not. The dongle even works at least 3ft away from the keyboard. Just good for laptop users.

[@giabao9242]

Is it flex like another keyboard with gasket mount

[@pusakalmkb]

This is hard to answer as not all gasket mounted have the same flex.

[@andreiserrano6554]

Hi ! Pwede po ba iremove yung standoffs sa stock plate? Seems like mas more stiff yung board with those standoffs at aluminum rin

[@pusakalmkb]

You might need a power tool for that. It’s steel I think.

[@Dinsorsoos]

What’s that frame you put on at the start?

[@pusakalmkb]

custom 3d printed frame

[@bonktoryu203]

What size of screwdriver did you use?

[@pusakalmkb]

sorry I forgot, I just picked the right size from my screw set

[@nanennggg]

does it have a software

[@callmerel2809]

whats the code for this one?

[@osirusj275]

Whats small words on the keycap is

[@pusakalmkb]

"PLASTIC"

[@josemiguelsantillan9646]

BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!! BOSS!!!

[@charleskennethhallig8234]

Hello, can you share the link for the gaff tape please? Thanks

[@pusakalmkb]

Bought locally at mr. Diy bro

[@enriqueyiieee6426]

another question pre pag 5mm thick na foam between pcb and plate kaya pa ba? or masyadong tight na yung 4.2mm?

[@pusakalmkb]

parang kaya naman pero mag cocompress na yung foam eh tinanggal ko kasi lahat ng screws pati PCB to plate kaya baka mag separate sila pag sobrang kapal na

[@cai3736]

I was really sad after finding out that there's a version of my keyboard with a removeable case and 2.4Ghz wireless. (I got the bluetooth one with no removeable case)

[@ZenkiKong]

My version isn't even hot swappable.

[@darkwriter_xx94]

Don’t know if you want to buy the upgraded one but it’s on sale now with a 20% coupon. I paid around $40 USD

[@Jaesiane]

taena. 3ildcat pinoy version hahaha! ayos

[@pusakalmkb]

hahahahaha

[@CEngi]

Boss is it really necessary to screw the pcb to the plate? Can I just leave it off like you did and screw the plate to the case? I'm doing the O ring mount mod and still feels stiff maybe it's the pcb screws

[@pusakalmkb]

You can try not screwing all of them. Maybe 4 screws at the sides. If you’re doing my mod maybe you can try clipping the stand offs as I did to the zeta61. I might try trimming the plate stand off for the pcb too. So it will be free as a bird. Flexin while typing.

[@CEngi]

@@pusakalmkb All right 4 screws o ring mounted and no screws for pcb to the plate then thanks

[@CEngi]

@@pusakalmkb also trying to get a pom plate for pmx.gg :)

[@pusakalmkb]

@@CEngi damn. Pmx.gg might be busy but the wait will be worth the while!!

[@CEngi]

@@pusakalmkb Do you have any Idea how much it is? I might join the next group buy

[@muneefazwad6810]

From where did you get that translucent frame?? 🥺🥺

[@pusakalmkb]

Ey yo boi. Got it as a freebie for the G68 on a local store.

[@romeladriangaugano6600]

Where did you buy your translucent bezel

[@pusakalmkb]

It’s from PMX.GG

[@thawzie]

thoughts on the xda profile?

[@pusakalmkb]

Very preferential question but I think they are good, deep tone but not too high as an SA :)

[@calebkyleaboy8576]

What keycaps are those?

[@pusakalmkb]

"Plastic" XDA

[@UnBlank07]

Yung bottom key layout niya ba is standard size? Or medyo mas maliit? compared to standard size? Planning on getting this keyboard

[@pusakalmkb]

you need a full set with 1u caps for the bottom and 1.75u shift

[@officalcornbread3963]

What’s the thickness of the foam

[@pusakalmkb]

4mm

[@letai2025]

can I use 3mm for the gasket mod ?

[@pusakalmkb]

i think it's too thin

[@chill6030]

Where did you buy that top cover? I like it but i dont know where to buy it

[@pusakalmkb]

ohhhh boi this was made locally 3d printed

[@pusakalmkb]

I don't bro sorry :(

[@chill6030]

​@@pusakalmkb it's ok bro

[@prins5793]

Im more surprised about the fact that they found and bought a hot swappable rgb rk g68 in the Philippines. Im out here still scouring the internet for an available one lollll

[@pusakalmkb]

Yeah. It’s from China btw

[@kathdeniii]

Keycaps at the end are from?

[@pusakalmkb]

"Plastic" keycaps from lazada

[@stoodgain]

uy may bago

[@miguiq3990]

Is this the same as the RK 68 or rather RKG 68? Or is the naming just off in websites haha

[@pusakalmkb]

G68 is the newer version released 2021. Be careful on buying a lot are selling the rk68 in g68 price.

[@miguiq3990]

@@pusakalmkb Oh! Thanks so much for the info hehe! So overall the G68 is the better option? Also would ya know if you could use other rk magnetic feet to increase the height? Thanks :)

[@pusakalmkb]

@@miguiq3990 yeah g68 is better tho I haven’t tried the old one but for me newer models are better 😅 Yes the magnetic feet are risers.

[@enriqueyiieee6426]

kakaibang mods mga ginawa dito ngayon ko lang nakita bangis HAHAHA

[@pusakalmkb]

Thanks boi!!

[@enriqueyiieee6426]

@@pusakalmkb gaano kakapal yung blue na tape na nilagay between pcb and plate?

[@pusakalmkb]

@@enriqueyiieee6426 4.5mm yata yun boi,

[@enriqueyiieee6426]

@@pusakalmkb san nakakabili?

[@pusakalmkb]

@@enriqueyiieee6426 sa mr. diy ko nahanap. Anti collision foam yung name

[@gt451]

need the link for those keycaps!!!

[@pusakalmkb]

shp.ee/5qe4s25

[@boomerz1882]

Hey Can you tell me which is better rk g68 or rk68 which one is worth it please

[@pusakalmkb]

g68 since it's new

[@boomerz1882]

@@pusakalmkb thanks !!!

[@bellaboo.916]

Hey can I get the link to this board? :D

[@pusakalmkb]

shp.ee/qay343c

[@zegoodya7339]

Wait how is urs that led color mine is just blue

[@pusakalmkb]

you might have bought the single color one

[@zegoodya7339]

@@pusakalmkb aw that sucks

[@nguyentuannguyen2203]

how many thickness for this gasket foam?

[@pusakalmkb]

3.5-4mm

[@nguyentuannguyen2203]

@@pusakalmkb can i use 5mm for rkg68 ?

[@ancestralx2770]

Im stuck on picking which is the the best board for me Im eyeing for gmakay k66 and this one which one is good also im fine with 60% layout anyone can help me ? i know this is late haha 🥺

[@pusakalmkb]

You can also check out the mw65/mw75

[@ancestralx2770]

@@pusakalmkb I just saw this but the price is too much for me is gamakay k66 good to mod? I bought last 12.12 only for 2200 😊

[@huylam8658]

what is the cover keyboard?

[@pusakalmkb]

It's 3d printed mahboi

[@huylam8658]

@@pusakalmkb Do you have link product??

[@LAECOCO]

Boss paano Kung eva foam na 3m yung alternative instead of felt lining? Magiging balance ba yung mod including pcb tape mod and plate lining foam

[@pusakalmkb]

Medyo muted since babawas mg space ang eva foam sa case. Nagfelt ako para malawak parin space sa case pero di hollow ang tunog.

[@LAECOCO]

@@pusakalmkb okay thank you sir! Inspired with your work!

[@pusakalmkb]

@@LAECOCO thanks mahboi! hope you stick for a while on my channel! :)

[@wanderingandroid]

joskolord, pagbinaklas mo yung duct tape baka kung ano-ano ang sasama galing sa pcb.

[@pusakalmkb]

Di kasi yan duct tape 😬 gaffer/cloth tape kasi yan. 🤣

[@wanderingandroid]

kala ko duct tape, lol

[@NAMEL3SSS]

Sir hm yung plastic keycaps? pwede pahingi rin po ng link

[@pusakalmkb]

www.lazada.com.ph/products/150-keysset-plastic-theme-pbt-dye-subbed-key-caps-for-mx-switch-mechanical-keyboard-xda-profile-keycap-for-68-84-96-980m-i1837371636-s7819251062.html?spm=a2o4l.searchlist.list.1.653f6aadsYxuTr&search=1&freeshipping=1

[@warrencanal4394]

Is this programmable?

[@pusakalmkb]

yes :)

[@saikufn2210]

Pwede kaya ang gasket mod sa rakk lam ang lite boss?

[@pusakalmkb]

Depende sa gasket style na gusto mo parang maganda sa RLAL yung o ring sandwich mod sa top ng plate.

[@maxinego2021]

u kinda give me :3ildcat vibes lol

[@pusakalmkb]

I'll take that as a compliment :)

[@orangeboiii.]

i shouldve just bought this instead of the rk61

[@vincejet]

might have missed it, but what's the difference between the gk68 and the rk61?

[@orangeboiii.]

@@vincejet better stuff

[@bijen01]

@@vincejet The rk61 is a 60 percent keyboard while the RKG68 is a 65 percent. Essentially the RKG68 has separate arrow keys while the rk61 has to use a shortcut where you have it hold on while pressing the keys.

[@danzo5521]

Joe. Biden just wants to eat your soul

[@ScheKitoff]

Yes

[@peaupi]

did you use hard felt or soft felt? o wala namang diff between them?

[@pusakalmkb]

Much better use soft felt to easily apply on corners

[@pusakalmkb]

watch the tom980 method of lining mas best yun na method na una ang adhesive before felt.

[@peaupi]

@@pusakalmkb will do! also, yung gasket mod inaaffect nya din yung acoustic or for softer typing lang siya?

[@pusakalmkb]

for acoustics purpose niya kasi yung plate medyo stiff din di masyado halata ang flex pero meron konti.

[@yohannoalipio4812]

Tried this on my rk61, sounded poppy af

[@pusakalmkb]

you dig??

[@yohannoalipio4812]

@@pusakalmkb yes sir. Only issue i had is mine is a more scuffed version 🤣

[@locowaffl3]

change stabsss!!

[@kravenaaa1986]

Boss, online mo ba nabili yung cloth tape na yan? MAy link ka po ba? Hehe Thank youuu

[@pusakalmkb]

Mr. DIY ko nabili to boi! Pero kung wala try mo search cloth tape or gaffers tape

[@kravenaaa1986]

@@pusakalmkb Mamats, boss.

[@d-tech2223]

Nice keycaps where did you buy them?

[@pusakalmkb]

I’ll ask the owner! 😊

[@stick3899]

Is there a purchase link for the rk?

[@pusakalmkb]

The seller of this specific rk with the top frame got sold out

[@stick3899]

ah thats unfortunate. do you have the website you used for the purchase? i have found websites that sell this model but wanted some alternatives to try to bargain for a better price. keep up the good work btw

[@pusakalmkb]

@@stick3899 I think RK boards are the cheapest for the price and value .

[@stick3899]

@@pusakalmkb yes but im after the translucent frame, and i cant find it anywhere online right now

[@JCSDOFFICIAL]

pawera ani boss oi

[@zarrowthehorse]

the music auuuugh