Royal Kludge RK84 Modding Guide (Step by Step Tutorial)

[@jasoli1749]

Oh my god you are literally God sent. I just got my rk84 and have been looking all day for proper guides.

[@Zeraphor]

Yeah, using his RK61 video and adapting the minor differences would have been to much for you, I agree ... 🙄

[@chiizuu752]

As if this is the only proper guide lmfao

[@jazmine136]

How long did it take

[@jasoli1749]

@@jazmine136 like 23 hours and 58 minutes

[@B1sD4k_got_the_milk]

I recently purchased this to mod for my daughter. I was surprised to receive a new version, I think. The keyboard already has foam under the PCB and a dampener behind the plate. The stabilizers are tight and out of the box the keyboard sounds good! The red switches are already smooth and silent and seemed to have a light coating of silicon grease but I still lubed the swtches for much better feel and sound. So all I did was a tape mod and I was done. Kudos to RK. 👌

[@Maronicam]

Where did You get it?

[@bndopp]

Just bought one off of Amazon and mine was the same! Was all ready to mod but there was already foam and everything as you described. I can highly recommend this board.

[@mparagames]

Is there a way i can figure out if the one i have already has this mod or not just from the serial / model number?

[@Xislex]

​@Starmain best way to know without opening it is shaking your space bar The older version has a notoriously bad stabilizer and you'll easily notice if its the old one or the new stable one

[@mparagames]

@@Xislex I ended up figuring it our it out, mine is the new one, however i kind of broke the stabilizer while trying to lube it anyways, so i will probably end up having to buy a new stabilizer eventually anyways also thanks

[@luisvazquez3522]

I am glad that you listened to the suggestions of the audience. Now many people are modding their keyboard. Very glad that you are building your own community. 100k subs is near the horizon!

[@krebsgewehr]

The rk84 is definitely a keyboard with potential. I think it's a better bet than the keychron k2 unless you are getting that one with the frame on it. Their all plastic versions look way cheaper than the RK84 and I think the lighting options are way cooler here too. I just added some foam and changed the keycaps to the white phantom keycaps from razer, will probably do switches and stabs at some point did a quck lube of the space bar. Super cool mod video!

[@janmichaelsuarez2996]

Hi mate will akko cs silver switch fits in rk84? sorry im new

[@elix3r.]

@@janmichaelsuarez2996 yes

[@salmonhippo9824]

razer's keycaps suck though

[@poptartpuck4068]

I am watching this very late but I am curious because you seem like you would know more on this than I would. If I were to put different switches in would it be a deeper sound and less poppy?

[@LordBigOoof]

​@@poptartpuck4068 depends on the switch

[@michaelthompson9798]

As an owner of this RK84 white keyboard, I’m digging doing a mod here is worth it for the appearance. I’ve never been one to do the “holee mod” as from video sound tests, the sound difference is so negligible and only worth the time to lube the stabs imo. But being a “custom keyboard” that’s my personal choice 🥰👍🥳. These modding series have been terrific and the some of the most detailed I’ve come across. Great job once again CTR 🥳🥰. Thanks for doing these videos. Cheers mate 🍻

[@boobear1298]

I had no idea that modding keyboards was a thing. I'm new to this stuff, but my bf recently built me a beautiful PC and I'm in love. I found your channel yesterday and watched your video on Top 10 mechanical keyboards. I was taken with the Royal Kludge, bought it off of Amazon, and it was delivered to me same day. I'm so happy you have this video on the same keyboard I chose! I already purchased the key caps and switches as recommended in this video (although I watched your video on switches and chose the Jelly black). I can't wait until I have everything else so that I can get to modding my first keyboard!! (Wish me luck)

[@bean3803]

You posted this the same day I ordered my rk84 that I’m planning to mod as well, just what I needed! This will be a great help!

[@chloeenstad1479]

Thank you soooo much for this! I am getting a RK84, but didn't know how to mod it at all! This realllly helped me. Really appreciate it! Thanks!

[@kafeinfaita6715]

I have the same board and Akko Lavender Purples. Followed this tutorial but I also did the PE foam mod between the PCB and the plate, and the typing sound definitely sounds more marbly than poppy.

[@Pre_Boom_bescent]

on your recommendation on beginner budget mech KB, I got a Redragon draconic K530. Couldn't be happier, waiting on my Akko switches and lube, still undecided on key caps....thanks again for the content.🔥

[@Danko_HS]

Do Akkos even fit into Outemu sockets?

[@GoodAtHeart]

Did all of these besides the holee mod because i was too lazy and it wouldnt stick from the factory lube on it. i gotta say it was all worth it, I ended up using the medical tape for the tape mod as its a bit thicker than the painters tape. On another board I tried super thick VHB tape and it really sounds good with that but I couldnt cover it entirely with the VHB tape because it was too thick. Thanks for this.

[@wakekeman]

If you fill your case with Aquarium foam or any thick foam. To almost full even the battery part. You no longer need to cut your stabilizers. Plus using a packing tape which you shows in 1 of your videos does make it sound really really good.

[@CasualXCars]

I recently got RK65 with creamy switches, and after replacing keycaps of choice, I still had little bit too loud of a thock. Mods I did were sorbothane sheet (0.10" thickness), tape mod x3, and gently re-lubed switches, and the sound was still little too loud. Went with the Epomaker Sea salt switches for ultimate silence while typing since the keyboard was for my work setup from home, and could not be more happier. I would recommend for anyone trying to stay on budget to go with Epomaker Sea Salt switches for the silence if keyboard will be used in office area (home/work) - because they are ultimately super silent and do not cost arm and a leg (like Durock or Gateron Black Ink v2)

[@Bri9282]

I just got the RK61 but thinking about switching it for the RK84. This is my first mechanical keyboard and I am really excited to learn more. I feel intimidated by this process but maybe someday I’ll give it a try 😅

[@jaysonibanez1088]

Bought my RK 84 with only 44$. I think it was a good deal, especially for 1st timer like me. Thanks for the recommendation

[@squidoo.]

The video us rk84 owners didnt even know we needed. Thanks!!

[@QuicSi1ver]

i have the RK H81 with their Sky Cyan linear switchers, great keyboad, even the stabs have no rattle and stand quite firm on the plate. RK makes some good keyboards

[@humanbeing-_-_-]

Awesome guide! Very easy to understand. New to the mechanical keyboard game but I just got one of these bad boys and some old school Nintendo key caps but wasn’t sure what else to get or do. Stoked to do the mod now. :)

[@jasonsdodd]

Now I know why I never got into modding keyboards. I like the before sound. I do have this keyboard. Feels nice to type on.

[@that8bitgamer82]

Thank you for making this video, I just modded my RK84 keyboard. The keys sound supper poppy and smooth thanks again stay safe 😊👍

[@flashback4259]

Ive Been wanting to mod my keyboard for a while but I can’t find an exact guide like this one, this really helped. Please do more of these videos.

[@upscalepilot9983]

I was skeptical about the modding the stabs, but I just did it and holy cow does it make a difference. I haven't even gotten to the foam, painter's tape or even changed the switches because I'm still waiting for amazon to deliver. I'm new to customizing keyboards I had no idea that even just modding the stabilizers make it sound so much better

[@sireajeel5009]

your channels almost 100k lets goo we can do it before 2022 comes. also mod redragon k599 would like to know what switch you'll try fit in there prob akkos.

[@sonicrocks25elsword]

Bought this keyboard with the intention of modding in the future, thanks so much for the video!!

[@saurabhceaseless]

of all the keyboard reviewers and mechanical keyboard diy'rs on the youtube, you are the only normal one, rest of them seems like they can use some help on addiction and craziness

[@privateaccount5400]

your name sounds like a kebab shop

[@saurabhceaseless]

@@privateaccount5400 never thought about it in that way, but thanks!

[@xavierbonet945]

Honestly, you're right, these Vintage Whites turned out sounding more like a typewrite than any other switches I've heard... I wonder though if the Machas or Radiant Reds would produce the same sound. They're much firmer, so they would also give that typewriter feedback I think. The whites are perhaps too soft for that. Anyway, great video and thanks for all the buy links! Especially for including international ones, as it's often impossible to find everything that's shown in some videos!

[@Shankus123]

I just got my RK84 from Amazon Oct 2022 and I’m happy to tell you all that there is already foam in the board!

[@AmbientWanderer]

:O

[@hyp_erxd28]

I don't know if you remember me but I've been here watching, I bought my hyperx fps alloy rgb because of your reviews and the quality in the video still goes under appreciated, I am very glad I subscribed at 13k and these videos have been very nice to watch even when not looking for things to buy, can't wait for you to reach 100k

[@icedbananacoffee]

This is my first board, it was a bummer that it came ever so bent in the mail, the board wobbles when typing. Just stuck some plastic sheets underneath one of the feet and fixed it lmao. Thanks for the tutorial, most I'll probably do for this kb is probably modding the stabilizers, and save up for another board to mod more

[@Space_Ducck]

Watching this video makes me want to bring life to my RK84, thanks for the great idea's.

[@ConsumerTechReview]

So glad you enjoyed! Good luck on modding it!

[@HapkiFighterJ2]

I just got my RK84 and I was going to add foam but mine came with foam already in the case and between the pcb and metal plate. I think Royal Kludge may have updated the S/N that starts with 22

[@theonlysoham733]

Altho don't have this kb but I love to watch your mod guides as i can grab some ideas anyway

[@Zeraphor]

Yeah, so many more ideas than his RK61 video ... /s

[@BEHEDETY]

Lubbing switches looks a lot of fun.!

[@waterboyd]

Akko Vintage White and Rose Red both my favorite switch :)

[@herbiemaster]

Lubing switches is a real pain and really time consuming. With my Drevo Calibur V2 Pro i tried spray lubing the first time and man, the result ist amazing! The only downside is, you need to wait 2-3 days until everything is really dry. Maybe you could show people how to do that too ;)

[@brzrk2605]

Helllll to the no.

[@jaydenerikewe7500]

That space bar😫. So good

[@ayecay4797]

I needed this because i want to mod mine

[@maartenromkes353]

Nice guide! But you make it look easy 😉 My stabs are really jammed in the board, I only got one out. They are a lot smaller irl.. But after fiddling with it for a while it's quite smooth.

[@miturtow]

Very nice tutorial, in-depth, concise, to the point

[@shreyasdharashivkar8027]

This is God Tier Content 🦸‍♂️🌌

[@aaliyahsmith6791]

This is exactly the theme I wanted and the board I’m gonna buy, you are the best !

[@blitz5803]

can you please do a review/unboxing of the RK68 Pro, I have BARELY seen any videos about it and I just ordered it last week and its my first mechanical keyboard. I would love to see a video about it please CTR! Your top budget mechanical keyboard video is what got me into this & great video as always :D

[@damonm3]

This vs the 3068b… mine just got here. Out on the porch. Maybe I should get out of bed to grab it😂🍻

[@amigo7672]

Keyboard came today. I love it. Thanks for the modding guide, sure to be doing them soon

[@madestro]

Watching this with my Akko 3068B and it sounds almost exactly the same. I have mine at stock since I just got it and want to "enjoy it" before modding but overall the board with jelly pinks is simply amazing stock and I probably will only do the basic foam, tape and stabs; nothing else needed for now imho. Althought the backspace and enter keys do break the sound profile sadly. Great content as always

[@Mazazamba]

Hey, I have this one!First thing I did was get it new keycaps.

[@kalamidaddy6585]

that spacebar is actually insane

[@Aileene]

Love your channel! I can't wait to get my RK61 in a couple of days! It'll be the first keyboard that I'm modding. IDK what my first switches will be yet. Hoping to watch more of your videos. :D

[@anhucnguyen4392]

im glad to watch this video. thanks for the lovely sound.

[@sirimiri7768]

Thanks so much for this review! I feel a lot more confident trying to mod my RK84 after watching.

[@pondsteppr]

i just put milky yellows in my rk84 and i love it

[@Mitsukiiii.Kogaaa]

FINALLY! Thank you so much for this! Got my RK84 because of you!

[@code0312]

Great mod and the whole build is not breaking the bank. Awesome!

[@Varbil]

great video! only critique i have is that do put disclaimer and credits that the keycap set are clones from akko.

[@samuel7jesus]

wow, it looks so good! I actually have Akko vintages white aswell and they're amazing

[@isammarji9663]

This tutorial is perfect for me. Times to buy this keyboard

[@deibeu2163]

been liking the modding guides!

[@syzygy8060]

I have so much respect and appreciation for you. This looks time consuuuuummmmmiiiiinnnnngggg lol. Thank you for sharing. I probably won't be modding mine any time soon lol.

[@juicyseaweed]

I love how detailed every mod is, I have the same keeb but i'm not sure how to tape mod it. Super duper helpful

[@felipebutcher]

i prefer the palm rest to be larger than the keyboard. if you are using the arrows for example your palm will rest out of the palm rest if it's the same size.

[@EthoVAL]

Wow that was actually much better than I thought it would be. Great video keep up the good work!

[@Solcres_Joa]

nice vid! loved the popyness of the switches.

[@ConsumerTechReview]

Me too, turned out nicely!!!

[@algotskoog5816]

13:50 i recommend bag lubing cuz its faster and more easy

[@kyvss]

Oh baaaby, this made me subscribe! You rock man!

[@DragonCatProductions]

AWESOME!!!! Edit: I just finished watching the whole thing it's awesome 🔥👍👍

[@PrestigePhoenix]

100k subs soon bro, keep grinding! lovely content :))

[@simonolsiak8972]

9,6/10 keyboard. Is rly cool. Good video. 🙂🇸🇰

[@nnyncke]

i really enjoy watching your videos! keep it up.

[@RicochetAQW]

Can you do a modding guide for the RK71? This was really good btw 😊

[@aar0123]

I would love to see a zebra/panda black and white build that would be sick

[@optimalaces8555]

Bro i got m Rk84 today and it came wit a steel case and sounds better stock than ur modded one

[@PinkyZKey]

This keyboard slaps. Literally.

[@Darkl0ud_Productions]

This video just so happened to drop right before I bought my RK84! Starting to mod it now. Everything but switches.. I just have no idea what I want yet other than linear and something that won't interfere with RGB colors....

[@hardy315]

awesome video!

[@EdSaenzDrums]

Another EXCELLENT video!! 🔥

[@cemiledortyol3753]

you created a beautiful work

[@Geneside]

Can you please make a Top 10 Best Mechanical keyboard. I love your videos keep it up!

[@chillout2656]

Hey CTR, I hope you'll respond to this. Since RK84 has battery, will it burn the EVA foam when used wirelessly for longer period of use?

[@BorisTheGoose92]

I figured you would want to cut out the foam around the battery due to heat. Thoughts on safety of this with the foam over the battery?

[@novaexx6587]

Damn you're right . Now i'd really like to hear someone's experience with this....

[@oguzdinc7664]

Thank you for a successful explanation😊

[@jamessantos9307]

awesome video! hope you could mod the royal kludge rk71 next!

[@skull7598]

This is at lest 1million subscriber quality content

[@Alex-sw9wc]

Hi, friend. Great videos👍. Please tell me what camera do you shoot with?

[@RazoWay07]

Thanks for making this vid! ❤️

[@janmichaelsuarez2996]

Hi NEW SUBSCRIBER HERE. I ordered RK84 but just want to change the keycaps. Will Akko Black nd pink keycaps compatible to the stock red switches comes from the RK84? Thanks

[@godblade9975]

Great video! Congrats on 100k! Could you do a modding tutorial for the ltc nimbleback with akko cs rose reds?

[@giogio9854]

Really nice. Hey, where did you buy your glasses? They look awesome.

[@maulanarezirosadi3653]

Very good explanation👏

[@rafis7736]

100K soon!

[@xmxhmxtx]

watched this on the livestream

[@c6mbo]

Great tutorial

[@samueloi6330]

this video give me anxious omg

[@ronnturaray4571]

The satisfaction!

[@NeXuS_Senpai]

Finally Yes!

[@BEHEDETY]

very nice!!! well done!!

[@TariqYasiinProd]

I'm buying this thing!

[@caboose6411]

This is making me want to take apart my rk84 again. Also what kind of grabber did you use in this video to hold the stabilizer pieces?

[@davemendez1859]

Would you consider the TM680 for a video? After the Akko Mod007 you have perhaps? Great video as always.

[@potipots695]

Great Video man! Keep up the good work!

[@baethovn7604]

"I just going to do a rough cut" while using a cutting pad with measuring increments