RPM PERFORMANCE INTAKE/ Turbo inlet install! KONA N

  Рет қаралды 9,771

Lone Wolf Detailing

Lone Wolf Detailing

Күн бұрын

Пікірлер: 61
@bryanwagner5971
@bryanwagner5971 11 ай бұрын
Just installed mine today. Took me an hour and only cause I watched your video like 5 times 👍. You were right putting the intake on the turbo inlet was a pain in the butt.
@FastKonaN
@FastKonaN 11 ай бұрын
Dang right 🤣
@krishnapatel2863
@krishnapatel2863 2 жыл бұрын
Use hair spray it acts like a lube but when it dries it's sticky so it'll add a extra layer of adhesive
@thepassionofthegoose5472
@thepassionofthegoose5472 Жыл бұрын
Old motorcycle grip trick.
@pepeshopping
@pepeshopping Жыл бұрын
Useless as a glue in a hot engine…
@robbier3661
@robbier3661 2 жыл бұрын
If you don't replace the original..would the engine break?? Please advise godbless
@FastKonaN
@FastKonaN 2 жыл бұрын
What do you mean engine break? These are just simple bolt on pieces that increase air flow to the turbo 😁
@RobTheNthusiast
@RobTheNthusiast 2 жыл бұрын
I have this filter on my car, just made a video on the sound differences. Yours definitely sounds different with the rpm intake hose
@FastKonaN
@FastKonaN 2 жыл бұрын
Definitely! I checked your video out bro, I had the pipercross filter before the intake install and it got WAY louder after putting in the RPM Turbo inlet + intake
@RobTheNthusiast
@RobTheNthusiast 2 жыл бұрын
@@FastKonaN nice! Yeah I can’t wait to add it, I just need to find a shop to install the turbo inlet, I don’t have much patience for that job lol
@cindysue5474
@cindysue5474 Жыл бұрын
@@FastKonaN Now install the load mouth air grabber they have now for the Kona N that CAI will get a lot of fresh air.
@exitixs5473
@exitixs5473 5 ай бұрын
What blow off valve do you have?
@RobTheNthusiast
@RobTheNthusiast 5 ай бұрын
@@exitixs5473 I have the sxth element bov
@elliotserrano7333
@elliotserrano7333 Жыл бұрын
Any link, video showing this works on the EN or do you know someone that put it on an EN? This looks like a great option for the EN.
@defaultdaniel
@defaultdaniel Жыл бұрын
Are you running inlet without tune? What do you think? Worth it? Small increase in power / peppiness?
@FastKonaN
@FastKonaN Жыл бұрын
Definitely a huge increase. Worth every penny. Will be getting a tune soon, can’t decide wether I want JB4 or full on ECU tune. Just getting every supporting mod before I start making some real power!
@defaultdaniel
@defaultdaniel Жыл бұрын
@@FastKonaN I think JB4 is a safe bet. So even without a tune you felt a decent difference? That's impressive. I've read without a tune, it may effect low down, around town torque, and make a little less. But under WOT, it's quicker. Notice any of this or it's overall better?
@FastKonaN
@FastKonaN Жыл бұрын
@@defaultdaniel So yes I have to be honest about my mods. It definitely felt like I lost low end torque with the blow off valve. Since I know it would recirculate boost to keep it up at the low end. So now it takes a minute to get going, but let me tell you when I installed the inlet/ intake. You can literally feel the boost build up and push you into your seat. Downsides are low end but the boost creep/ build feels very violent and I love it 😂
@defaultdaniel
@defaultdaniel Жыл бұрын
@@FastKonaN Really the BOV made it feel like you lost HP? That's crazy I thought they don't effect anything - really just noise. You installed the BOV first and before the inlet? I guess the inlet is safe then.
@FastKonaN
@FastKonaN Жыл бұрын
@@defaultdaniel Yup BOV was one of the first mods, not so much a loss of power but when you let off all the boost escapes. The upside of the BOV is the boost is super consistent since it creates a better seal so when you’re at full throttle it’s not going anywhere.
@rjpada
@rjpada Жыл бұрын
man i also struggled a lot putting on the forge inlet for my VN.
@FastKonaN
@FastKonaN Жыл бұрын
Worst thing ever 🤣 I’m not looking forward to doing the downpipe next
@jeffreysteele6404
@jeffreysteele6404 2 жыл бұрын
How do you like the intake and turbo inlet? I ordered a forge intake forge bov and a forge turbo inlet for my Elantra n
@FastKonaN
@FastKonaN 2 жыл бұрын
I love it, I got way better gas mileage. Low end torque with the car showing up to 300lb/ft on the digital gauge, also top end power is great you feel it constantly pulling until redline now! 🔥
@stephencorbo9164
@stephencorbo9164 2 жыл бұрын
@@FastKonaN how much better gas mileage, what was the difference?
@FastKonaN
@FastKonaN 2 жыл бұрын
@@stephencorbo9164 It’s definitely a big difference I noticed a 5-10mpg increase and less downshifting when on cruise control. Keeps the RPMs down because of the torque gain I believe!
@pepeshopping
@pepeshopping Жыл бұрын
Why would you risk your warranty for a minuscule or zero gain?
@FastKonaN
@FastKonaN Жыл бұрын
I wouldn’t say minuscule if I’m way faster than the Elantra N and Veloster N by 2 car lengths.
@slow_rednline4874
@slow_rednline4874 Жыл бұрын
It wouldnt void the warranty. I literally went to a dealer with a jb4 on the car with a blown turbo and they warratied the car 🤷🏿‍♂️ it's dealer dependant
@johnsmith1034
@johnsmith1034 Жыл бұрын
Why would they void a warranty changing a hose while keeping the stock box😂
@Firemedic-qi8yd
@Firemedic-qi8yd Жыл бұрын
Where'd ya get that cap for the bov recirc line?
@FastKonaN
@FastKonaN Жыл бұрын
It’s actually a leg cap for a metal folding chair 🤣🤣🤣 just took it off and it surprisingly fit haha
@Firemedic-qi8yd
@Firemedic-qi8yd Жыл бұрын
@@FastKonaN that intake just came in today so was curious. It did look like one of those leg chair pieces lmao
@FastKonaN
@FastKonaN Жыл бұрын
@@Firemedic-qi8yd it literally hasn’t fallen off with the hardest driving 🤣
@thomax7689
@thomax7689 Жыл бұрын
Do you remap ?
@FastKonaN
@FastKonaN Жыл бұрын
Not at all
@samueldurham1136
@samueldurham1136 2 жыл бұрын
Did your peak boost change after the inlet ? Mine only wants to go up to 15-16 psi max
@FastKonaN
@FastKonaN 2 жыл бұрын
Mine hits 18-20psi but also from the octane learning system in this car
@unexplainedwearenotalone3537
@unexplainedwearenotalone3537 Жыл бұрын
@@FastKonaN hey man u go tuned I saw with race chip looks very fast results from 100-200 11sec crazy fast stock only Chip check them there good many trust them.
@FastKonaN
@FastKonaN Жыл бұрын
@@unexplainedwearenotalone3537 yeah I’ve looked into many piggy back tunes but I think I’ll just go with a tuner even though it voids warranty. I’d like to get the most out of my modifications!
@unexplainedwearenotalone3537
@unexplainedwearenotalone3537 Жыл бұрын
@@FastKonaN ok man let us know when u done show us more test results speed videos ok
@4biddentv175
@4biddentv175 2 жыл бұрын
🔥🔥🔥🔥🔥
@EricJohnsonUSPSA
@EricJohnsonUSPSA 2 жыл бұрын
Sxth Inlet at least makes reconnecting the intake easy. That short design is interesting.
@FastKonaN
@FastKonaN 2 жыл бұрын
Honestly I think this is better, tons of intake whooshing noises 😍
@iadoremelissa12345
@iadoremelissa12345 7 ай бұрын
Turbo inlet doesn't change a single thing. Just because it's bigger doesn't mean the engine is gonna magically suck in more air. It's made that size for a reason. On the other hand the cold air intake does make a difference because the air flows more freely do to not the size of the pipe but the fact that the piping is straight with out those gloves on the plastic intake tube and because of the filter itself. Y'all shouldn't waste money on the turbo inlet. Does nothing..
@FastKonaN
@FastKonaN 7 ай бұрын
To each their own, it definitely looks better that’s for sure, the turbo opening is only so big so I agree with you. The inlet goes from a small hole which is the size of the turbo opening, then expands to make it seem like you’re getting more air. I got this kit because I didn’t like the way any intake systems looked and this was a 2 in one combo that fit the stock air box. Which is what I like to call OEM +
@iadoremelissa12345
@iadoremelissa12345 7 ай бұрын
No doubt it looks bettet. But performance wise does nothing. I think AEM does the cold air intake tubing the same size, again cause they know what they're doing and know that bigger tubing does not do anything for performance. Don't get my wrong I love the way your intake looks with the fat tubing looks mean but yes, to each they're own. Good job on the install btw
@FastKonaN
@FastKonaN 7 ай бұрын
@@iadoremelissa12345 I got something way better than the Kona N anyway need to make a video soon 😎🤣
@iadoremelissa12345
@iadoremelissa12345 7 ай бұрын
@@FastKonaN I'll be keeping a lookout for the video 👀
@hg1496
@hg1496 4 ай бұрын
All of this is false...the unitronic turbo inlet for the audi RS3 has proven 15-20 hp gains. Even though the turbo inlet size stayed the same.
@VidVidavid-666
@VidVidavid-666 7 ай бұрын
Turbo circulation air of car
@waltscrossfiresrt6
@waltscrossfiresrt6 2 жыл бұрын
Warranty definitely gone after that Hyundai looks for the simplest reason to void a person warranty
@FastKonaN
@FastKonaN 2 жыл бұрын
I’m not worried about warranty anymore after hearing all these claims about peoples engines blowing or transmissions with Hyundai not quick to pin the problem being the customers fault. So far I’ve done my own oil change and documented and all these other mods.
@mattwentworth4004
@mattwentworth4004 2 жыл бұрын
I've asked my hyundai dealership about voiding warranties, and essentially you can anything to your car and still have the warranty, only when they determine your mods were the cause to an issue is when you void the warranty
@slow_rednline4874
@slow_rednline4874 2 жыл бұрын
Crossfire who gives a shit about a warranty.you don't understand them anyway
@nstylemotorsportsracing1471
@nstylemotorsportsracing1471 2 жыл бұрын
Correct! And Hyundai actually allows you to have certain mods. This guy 🙄 forget your warranty now after an intake 😂 ok buddy.
@marcussanchez28
@marcussanchez28 Жыл бұрын
@@nstylemotorsportsracing1471 Foreal😂😂 you can definitely ask your dealership what parts are fine and they will tell you ….mines pretty chill with everything tbh just gotta tell ‘em in advance 🙏🏻
Hyundai Elantra N Forge Turbo Inlet and Intake Installation
22:14
N-Power Automotive
Рет қаралды 17 М.
Каха и лужа  #непосредственнокаха
00:15
PRANK😂 rate Mark’s kick 1-10 🤕
00:14
Diana Belitskay
Рет қаралды 11 МЛН
За кого болели?😂
00:18
МЯТНАЯ ФАНТА
Рет қаралды 2,3 МЛН
Hyundai Kona N Turbo Inlet/Intake Install
12:56
RobTheNthusiast
Рет қаралды 1,1 М.
Kona N Takeda 3” Midpipe. INSANELY LOUD! 🔥
4:44
Lone Wolf Detailing
Рет қаралды 12 М.
Montage des Forge BlowOff in meinen i30N
10:30
Ragnaroeg675
Рет қаралды 34 М.
SXTH Element Elantra N, Veloster N & Kona N Turbo Inlet Installation
3:27
SXTH Element Engineering
Рет қаралды 10 М.
Installing a Blow Off Valve on My 2022 Hyundai Kona N
6:47
Gavin Alaoen
Рет қаралды 10 М.
Elantra N SXTH Lite Intake + Inlet Adapter
9:42
Umarov Racing
Рет қаралды 1,8 М.
Why I Bought a Hot Air Intake
5:36
N-Power Automotive
Рет қаралды 6 М.
Hyundai i30N Forge motorsport Turbo elbow
8:18
Driveway buildz
Рет қаралды 5 М.
Why Cold Air Intakes DON'T or DO Work on Your Car - Motive Tech
30:23
Каха и лужа  #непосредственнокаха
00:15