Growatt WiFi Setup

[@Bensgarage]

It's so nice to be able to pull up the data on your phone/tablet.

[@alimawla5987]

How to put the user and password for the sign

[@ashleyhess2324]

Exactly you need an OSS code in the registration phase that is taken by the growatt installer

[@morneconradie6184]

Struggled my ass off to get this working, was actually making peace with the fact that I will not be able to track my usage. Got it working thanks to your video

[@PrinceRapthorne]

Thank you for this guide. Deciphering growatt's instructions can be a headache. Nice to see a foolproof step by step

[@nobotshere8364]

After a dozen different videos, 3hrs wasted your video was the only one that worked! Thank you! Lesson, don't change your wifi hub!

[@Bensgarage]

Glad it helped.

[@aadyav8876]

​@@Bensgarage À1a

[@ericgrant-y2b]

Thank you so much for the video. I have been trying to connect a generic data logger (exactly the same) for the past three months until the inverter blew up. Changed it for the Growatt (identical) now hopeful to get the Growatt datalogger connected. The previous data logger had no configuration information. Thank you Clive

[@christianschuff5970]

100 bullshit videos wahtched, spended 10 hours without success. than i saw your video! thank you very much from germany! chris

[@Bensgarage]

Glad the video helped, it's the reason I make them.

[@ashleyhess2324]

Growatt asks for an OSS code that is taken by the growatt installer or the society he works for...how to bypass them?

[@duncan7875]

Thank you for this. I never managed to get the app to work but your pairing method worked to get it connected to WiFi. I then went into the online dashboard and was able to add manually there :-D Once in the online dash it then also appeared in app.

[@livityinvesting8340]

Thanks for this suggestion. I ended up doing it that way too. So much easier.

[@AyaObeid-vy6gf]

When i scan for datalogger configuration it shows (Existing datalogger SN).. what does that means ??

[@blunderdam]

Very useful video! Thank you! There's one thing though and I don't know if anyone has experienced this before. When I try to enter the IP in the browser, I get the message saying connection has failed. Any clues to why? In the end I did successfully configure the dongle skipping the IP method but I still wonder why doesn't work for me if I followed every step. I'd appreciate it a lot if someone could shed some light on this ❤

[@GingeredLove]

This is helpful but I can’t seem to get the app connected on the last configuration part. It does not connect the data logger to the router, but it’s flashing blue after I logged in to the portal and configured the WiFi there

[@Dave_889]

Same thing happened to me. Did you get it resolved?

[@marvinmaina2883]

And if the communication device is showing a solid red and a solid green?

[@juansebastianrottela7886]

Your video was so helpful, but I still can configure it. When the connection start with the router and the wifi, it says.. falled.... 😢😢 I'm from Argentina, and I have starlink. Have to configure the network in 2.4 ..but can't do it... So hard to configure

[@Gi4mma]

necesitas tener un router con 2.4ghz, seguramente starlink debe ternerlo unificado. Si pasas a un router comun mediante la configuracion bridge, tu problema deberia solucionarse.

[@omarrifai7985]

I installed the growatt wifi and everything is ok. Two days ago there was a problem with the growatt battery and it was fixed. After connecting the battery with the inverter we realized that the growatt wifi is only lighting green... so what's the problem?

[@nelsonemmanuel6030]

How can I configure a bms cable from lithium battery to inverter

[@pimeenta]

Thanks a lot. This was the only way to make it work.

[@AyaObeid-vy6gf]

Can we connect more than 1 device ??

[@darrylbrook5968]

You can scan the logger during the process then plug it in...

[@MjChtindiri]

I want to do lessons for this where should I go

[@shahrazadhallal2468]

What color the key should be at end of the process? Mine is still blue although my phone is connected with the datalogger. And it shows discharge on the shine on app. Not pv charge and discharge. Is there somethin wrong?

[@jaynerouth7199]

All I’m wanting to know is how to reset my Wi-Fi to my Growatt dongle I’ve watched several but they all seem to be different….

[@AhsanRaza93]

Great video, very helpful. But does it provide the real-time information or there is some lag between the real-time information and the information on the growatt invertor?

[@Bensgarage]

It logs every five minutes, so not in real time.

[@maxbiagi3091]

Unfortunetly with the Android 14 phones they Shine App not worked about pair with dongle.

[@iulianhodorog9979]

HOLD UP: do you press KEY with a pin ON THE LED ???? I see no other little button around...

[@Bensgarage]

Yes the pin goes in to the hole with the led.

[@iulianhodorog9979]

@Bensgarage Did that, thank you. Very weird inverter all around 😅

[@joewinterscheidt3997]

Glad to hear I’m not the only one with issues. I have blue flashing lights all around on the dongles, then I go to scan the bar codes and it says success!, but nothing pops up and it never takes me to step two. Any suggestions? (Tried rebooting the dongle)

[@naregtee5912]

I have the same issue but i dont know how to fix it 😕

[@iamstrongaf]

Hey, Do i need battery installed to check my power consumption? Coz mine only shows power generated.

[@Bensgarage]

you should be able to see load consumption on the app, have you tried the desktop version? Log in with the same details as your app here: server.growatt.com/login

[@ayaazdall7740]

Hi I am having the same inverter growatt but it's not connecting everytime when I try confirmation being fails can you help

[@larrybell4599]

Thank you for sharing this information.

[@mss5696]

Great set up demo..a quick summary at the end should have been better to understand the steps again..

[@VisithaGalhena]

Hi , My Growatt 5000 ES electricity coming from both Phase and Neutral. I did not measure the amount yet. What can be the issue. Using SBU mode.

[@Christian-lt7wd]

Is this model sof5000es? If yes what type of wifi modem you have?

[@Bensgarage]

Yes it is an SPF5000es, we have an orange Livebox.

[@JustaCuriousity]

Hi Ben, i couldnt find your battery set up. Can you share your battery set up as well?

[@Bensgarage]

Check out this playlist, there is the battery installation video, and also the wiring from the inverter to battery BMS: kzbin.info/aero/PLIF6NSGKv0MJZJ65kj4JejgvHHI9bSuhW

[@laslynreeves5827]

Hello Ben. My daterlogger is blinking blue but I just can't get it to work on the app

[@aidenchotia9076]

I have the same issue Have you fixed yours yet?

[@mrmr3289]

On the 2nd day of trying to get it to connect.. Infuriating. The ip address does nothing with the dongle

[@LucidFX.]

i have been trying on and off for months to get it connected. I get the blue light then nothing shows up in the networks and just before it turns back to red i see it but then can't connect because it is then in the incorrect state. Tried again last night - no go. even from Phone or Tablet.

[@mrmr3289]

@@LucidFX. still not working here either. Since tried changing its server url, allowing router to access. Gets to about 60% +fails. Just will not connect to the hg633 router

[@LucidFX.]

@@mrmr3289 I think I will try again tonight. Perhaps on the weekend i will just yank it out and put it back in and see if that helps

[@mrmr3289]

@@LucidFX. it can be reset, pulling it is what I tried too. When the installer talked me through connecting it there seemed to be some extra steps that didn't makes sense. Still even then it didn't work.

[@skywalker_0427]

So the dongle needs wifi to be on 24/7 to be able to communicate with the shinephone app on my phone? Having mobile data only on the phone is not enough?

[@Bensgarage]

If you want it to log data all the time then yes the wifi dongle needs to be connected to the growatt server 24/7. It connects to your app via the server. So it goes dongle - Router - Growatt server - back to router - device that has the app.

[@Trevskycam1]

Hi Ben ive the same set up could you share your settings so I can test my system? currently the dongle isn't on the dongle list it won't connect it so I have to connect growatt to clear it?

[@payk24]

Hello Ben, could you check if the ground pin is connected to neutral in the inverter using a multimeter?

[@Bensgarage]

I used a multimeter , set to continuity to check all my earths/grounds were connected.

[@alanmainwaring1830]

Hi there checked here in Australia that all growatt onverters have the neutral and ground are indeed bonded.

[@matthunt2128]

I'm off grid with no router. Can I connect using my phones hotspot?

[@Bensgarage]

I don't know, you could try it.

[@ΧειραγώγησηΤουΝουαπόταμέσαμαζι]

you try it and what hapend

[@onlineshoop1066]

what if the color on growatt wifi can't change? I've tried clicking it 1 time the result turns blue but it's not full, I tried clicking it again but it doesn't work. what is the solution for such problem?

[@laingyn]

i got a growatt inverter but can't see consumptions usage In shinephone App. do u have a smart meter usage monitor installed?

[@Bensgarage]

No, I just have the Growatt dongle and the ShinePhone app.

[@laingyn]

@@Bensgarage thanks

[@isoknew]

I can't scan. Where can i download app on Android

[@stevenso94]

Hey Ben, quick question. When I add my connect my datalogger with the app, I can only see my current production and not my consumption. I do not have a battery installed. When you open the app you see everything automatically. Am I doing something wrong? I'm using a MIN 3600TL-XH with the Growatt ShineWiFI-X. Thanks in advance!

[@Bensgarage]

When I open the app, it shows everything from production to consumption and in my case my battery percentage. Not sure why yours doesn't.

[@waldircuello6868]

Hello Ben, thank you for amazing content. My app shows that my dongle is "offline" would you be able to assist why is that?

[@Bensgarage]

Have you gone through the procedure in this video, if you have followed it step by step, it should work.

[@arkarpainghtoo23]

Not Working ... Datalogger have been add and there is nothing in the data list

[@mrtimacaddehassan8835]

Where is connect the commication ware?

[@Rovercoupe.]

Hi there Ben.. very informative.. saved 120 trees then started the rangie and killed a small Forest 😆😆😆all jokes aside.. love the idea of producing your own energy and keeping costs down,, can the panels be cooled down in any way? As always stay safe and keep the vids a coming Paul.

[@Bensgarage]

We could always aim some fans at the panels.

[@larrymiller7128]

My can't scan or manual..what the hell!!😢 can please help..thank you

[@Bensgarage]

Sorry, I don't understand the question.

[@larrymiller7128]

@@Bensgarage sorry when I'm trying to scan the SN it's not working n when I do manually it say it can be verified

[@georgeskamagas5476]

Good day my friend !!A question I have ...when you try by the phone to go in to the settings of the inverter, it ask you a password ..... what is that ? 12345678 is not ,router is not .??? Do you have any idea?

[@Bensgarage]

I don't know what the password is, I have tried but have not been able to access that part. You could ask Growatt, I wasn't too bothered as our inverter is in the house and easy to get to to check settings etc.

[@georgeskamagas5476]

Thank you my friend... AND THANK YOU FOR YOUR VIDEO...

[@Kaz34m]

Could you help us? We have Network Timeout its saying the shine box isnt connected to the router. It was working earlier so i dont know why all of a sudden its lost connection.😩

[@Bensgarage]

We get that sometimes, always comes back. I wonder if it is issues with the growatt server.

[@monika.SoEasy]

my wifi can't connct my internet,I don't know why

[@gapster77]

Hey? Your the guy who mods air guns! 😁 Fancy finding you when I’m setting up an Inverter?

[@Bensgarage]

Correct, it is I.

[@tarikishewband1343]

What is the growatt app name ?

[@Bensgarage]

shinephone

[@Workshopshed]

The spark didn't manage to get this setup, but then I realised he was scanning the wrong barcode. Typed the code in via the website and it all worked fine. Do you know if I can pull the data into my home server?

[@Bensgarage]

Sorry, I don't know. My technical knowledge only stretches so far.

[@Workshopshed]

@@Bensgarage the UI is nice but I expect I will find the limits of it before too long, particularly if I want to automate stuff

[@davidbrennan1980]

Hi Ben.... Keep getting Failed to connect to Server/ Network Error? Any thoughts?

[@Bensgarage]

I had it a couple of times, if you follow the procedure it should work.

[@fatenhamad549]

How can i solve the problem configuration failed

[@aren-joebizdikian5236]

Hi there Ben, thanks for the informative video. I've been having issues connecting as well, with the configuration failing after it reaching 100%. Do you think there might be an issue with my wifi router settings, or would it rather be a faulty dongle? Should I go ahead and order a new dongle? Thanks for the help

[@Bensgarage]

Not sure, if you have followed the procedure in the video, it should work. Make sure your dongle is specifically for your inverter. Growatt sent me a replacement which was not compatible with my inverter, they sent the right one and it connected up fine.

[@JustaCuriousity]

If you still havent got it working, try to plug the dongle into powerbank or adaptor for smartphone 5v 1A. Got mine working, what a day!

[@rickysilva7705]

I’m struggling so much with the same issue, what a frustration!

[@edmondcham5304]

Its not working it turns to steady green when i configure the hotspot and when i open shinephone it says error

[@Bensgarage]

It it is only flashing green, you have the dongle connected to your inverter and your router, but it is not connected to the Growatt server. Until it flashes blue it will not show up on the app.

[@dr3yec]

I just get a solid green light no matter what I do.

[@Planeta_uz1]

У меня не получается

[@Africanelectricalengineering]

What is the name of the app

[@Bensgarage]

Shinephone

[@salim.buet09]

did not work. Even the guide did not match with Guide what I received with device.

[@mone3260]

Bonsoir comment fait on si la lumière bleue ne clignote pas ? J'ai deux onduleurs en parallèles, un sa clé wifi fonctionne bien l'autre clé wifi ne veut rien savoir. Merci

[@Bensgarage]

Désolé je ne sais pas. Avez-vous réglé les onduleurs, un pour l'hôte et l'autre pour l'esclave ?

[@LWeRNeO]

can't make this shit work. blue led is flashing but as soon as I try to configure it on my phone it says connecting to router and nothing happens...

[@Christian-lt7wd]

Can you connect to the dongle with a smartphone and see your stats ? Or do you need a a router? My only source of internet is my phone.

[@Bensgarage]

No, you need a router to connect to the server (in China) and then you phone gets the data from the server. You can't connect to the dongle directly.

[@princesstaurusbaron7640]

I need some help

[@IrisGalinski]

Was ist das passwot

[@LMBUElectrical]

You would not believe how much issues im having with this wifi dongle! I tried all your steps and my app does not look as good as yours. Interms of information

[@naishals]

Poor Service support. I suggest if one cannot provide required service, one should not do that particular business. Took the solar rooftop system but on request no service support is provided. The concerned person Mr.Anand Desai and Mr.Gaurang have no reply to our issues. Mr.Ashish from Growatt is always unavailable to contact. Though, solar rooftop system is a must need and very useful, No point spending 3-4L behind this company. Go for a different company instead of Luxsoli and Growatt !!!

[@Bensgarage]

I've not had any problems with Growatt support, always answer my emails and respond accordingly.

[@solarpowerplant5471]

What ts the toll free number this company ...

[@Bensgarage]

Sorry, I don't know.

[@solarpowerplant5471]

@@Bensgarage if any problem in Future this product how to resolve this problem..

[@Bensgarage]

I have been emailing them, emailed growatt first , then an engineer emailed me back. Never had the need to call them.

[@solarpowerplant5471]

SORRY' PROBLEM IN FUTURE..HOW TO SOLV THE PROBLEM MAIL ID..

[@WiSeNhEiMeR-1369]

Thanks I have no CELLULAR TELEPHONE - so this appears to be a WASTE of $$$$$ 😞 COOP ...

[@besttechshop329]

Which is the installer Code?

[@Bensgarage]

I was told by my supplier to enter AMJF7 as the installer code.

[@kepelaminan_digital]

what the password mr?

[@salta5859]

Sometime you have to think like a manual 😂

[@patrickmckowen2999]

👍

[@D1g1tal_H1ppy]

router not rooter