RSLogix 5000 Indirect Addressing Detailed Version

This video shows a detailed example of RSLogix 5000 Indirect Addressing and how to use it. RSLogix 5000 Indirect addressing is a key element in making programs have a more in-depth logical control using an array.
Check out our training center:
www.allen-brad...
Servo Motion Mastery
www.udemy.com/...
Advanced Servo Motion Mastery
www.udemy.com/...
Also if you are interested in supporting my efforts in providing more helpful training and get specialized training videos then check out my Patreon.
/ onlineplcsupport
Please answer below these questions so I can provide better support for you
What is the biggest challenge/problem when it comes to PLC programming with Allen Bradley or Rockwell Automation software?
What is your goal for your company, and what do you personally want out of it?
#RSLogix5000
#IndirectAddress
#PLCTraining

[@brandonly27]

For any of you who are wondering the "Emulator" requires a yearly license to run, which is prohibitively expensive! I have come up with a solution to this problem. I use a generic HMI and free HMI software to emulate the chassis (I do not use the emulator). You can buy a cheap L71 and A7 AB backplane on E-bay for really cheap, which you will need. But it will totally bypass your need for the license.

[@ShaneWelcher]

Every day is an opportunity to learn.

[@thiefgold0913]

Would you have to use the move instruction as the same as rslogix 500 program. I have a N70:[n25:6/0} thru n25:6/7 that is illustrated as a instruction bit to turn on each output. Would it be one move instruction or eight. There is conditions in the rung that comes prior makes to were the rung is or not that has to be met.

[@ShaneWelcher]

RSlogix 500 is slightly different than RSLogix 5000 & Studio 5000.

[@thiefgold0913]

It is a conversion from rslogix500 to studio 5000.

[@ShaneWelcher]

@@thiefgold0913 The use an array of data for the indirect address call like I did. [Dint[32]]Dint The Dint on the left calls which level of the array data you want to use.

[@thiefgold0913]

@@ShaneWelcher Ok thanks!

[@dalklenderman7225]

I am converting a RSLogix 500 program to 5000 and 5000 doesn't like the addressing: 500 address N[N87:101]:[N87:100] and 5000 imported it as N[N87_101][N87_100] but doesn't like it any suggestions? Thanks

[@ShaneWelcher]

Why not do things that would be helpful in the future like renaming tags?

[@dalklenderman7225]

@@ShaneWelcher yes I am in the process of that but that wasn’t my question

[@jasmingarneau1431]

Have you found a solution to this? I am also currently converting a Rs500 logix program to a studio 5000 and i am strugling, do you have any tips for me? Thanks!

[@barrydummigan9987]

video quality poor

[@ShaneWelcher]

Use the quality bottom on KZbin, the video is 1080HD

[@barrydummigan9987]

THANKS. Great video. have you any links to your courses?

[@ShaneWelcher]

@@barrydummigan9987 allen-bradley-plc-training.teachable.com