Rubbit EFoam Spray Setup/Review

[@rajsubramanian4331]

Good to see your review before I am ordering it.

[@Maxamill_23]

Glad I could help

[@Hhisno1]

Just ordered it, thanks for video

[@Maxamill_23]

Hope you enjoy it

[@longjohn6828]

does it make noise like its priming the pressure inside??

[@Maxamill_23]

Yes it does but it’s not loud surprisingly… you barely hear it in the video

[@Arttm3]

How is it holding up so far? I was looking to get an electronic foamer and I know some brands I read about have malfunctioned after a few uses so just seeing how it’s doing so far.

[@Maxamill_23]

@@Arttm3 I’ve used it at least 8 times for friends and other stuff no problem yet

[@Kac2rhyme2]

Again another tesla being cleaned. But this car isnt dirty. Wouldnt this just rub the dirt into the car

[@rpproductions844]

Put Car in wash Mode 😂

[@FrankieBoy11-y2p]

What I don’t get is aren’t you just rubbing the dirt particles all over the paint scratching it? With this you’re not hitting it with water first to remove all the loose dirt before you wash so you’re basically rubbing dirt into the paint

[@Maxamill_23]

@@FrankieBoy11-y2p good question I thought the same but saw it on a black suv which once it was applied and it soaked for a few seconds, it doesn’t scratch the paint, dirt comes off and doesn’t leave water marks… now i haven’t seen it done on off-roading vehicles

[@ericrodriguez6650]

Hi! Long time detailer here. The benefit of having a foam sprayer is the foaming aspect. What it does is it encapsulates the loose dirt and helps pull it away from the surface as you wipe. The proper method for this type of car “wash” is to use a “rolling” method with the microfiber towels. There’s so many different opinions on pre rinse before foaming and truly you just have to find what works best for you. In my personal opinion this method on lightly dusty cars is perfectly fine. Now trying to do this in an actual dirty car can be more damaging to the paint. A proper wash and rinse with a garden hose or pressure washer is best to knock off heavy dirt and mud. My method would be to 1. Pre Foam to break down and grab into loose dirt. 2. Rinse off pre foam with pressure washer or garden hose. 3. Foam again and start contact wash. 4. Final rinse then dry.

[@Maxamill_23]

@ thank you that’s a better explanation